All External Airsoft Parts & Attachments

If you want to add a bit of style to your Hi-Capa pistol, or you just want an extended magwell for faster and more reliable reloads, the Novritsch SSP1/SSP5 Magwell is what you need. This piece is constructed from CNC-machined Aluminium, guaranteeing a flawless and precise finish. This Magwell is compatible with Novritsch SSP1/SSP5 pistols but may also fit some other Hi-Capa pistols.

Magwell extensions are a fantastic addition for those who value a speedy reload, designed to guide your magazine in and correct for any slight mistakes under pressure. The result is an easier, faster reload and the option for more skilful players to reload "eyes-up", i.e. while continuing to scan for targets without looking down at the pistol.

Improve style and performance with the Novritsch SSP1/SSP5 Magwell, a simple upgrade that will make your reloads faster than the rest.

If you want to add a bit of style to your Hi-Capa pistol, or you just want an extended magwell for faster and more reliable reloads, the Novritsch SSP1/SSP5 Magwell is what you need. This piece is constructed from CNC-machined Aluminium, guaranteeing a flawless and precise finish. This Magwell is compatible with Novritsch SSP1/SSP5 pistols but may also fit some other Hi-Capa pistols.

Magwell extensions are a fantastic addition for those who value a speedy reload, designed to guide your magazine in and correct for any slight mistakes under pressure. The result is an easier, faster reload and the option for more skilful players to reload "eyes-up", i.e. while continuing to scan for targets without looking down at the pistol.

Improve style and performance with the Novritsch SSP1/SSP5 Magwell, a simple upgrade that will make your reloads faster than the rest.

If your Golden Eagle M870 has developed a leak, then this is what you need! The Golden Eagle Pistol Grip Green Gas Tank for M870 Shotguns is designed for the Golden Eagle M870 gas shotgun series but will also fit Tokyo Marui M870 platforms, though modification may be required. 

The set includes a Real wood pistol grip with an integral steel and alloy gas tank which can be filled via the fill valve on the base of the grip. As is usually the case with modifications and upgrades, we do not recommend this part for anyone other than a technically proficient Airsofter as it may require troubleshooting to get working perfectly. 

Get your gas shotgun back on its A-game with the replacement Golden Eagle Pistol Grip Green Gas Tank for M870 Shotguns and stop worrying about any leaking gas.

Looking for fast access to the selector switch on your AAP-01? So are we! Thankfully, TTi, being the innovators they are have invented the perfect solution! The Competition Charging Handle with selector switch combines an extended charging handle with an extended rotary selector switch which allows you to change fire modes in a flash without needing to lock the bolt open and break fingernails. This is the aftermarket part the AAP always needed!

If your MCX is a bit of a pig and you want more agility, the Airsoft Artisan 10" Carbon Fibre Handguard for MCX Virtus AEG will do the trick. This handguard is constructed from authentic Carbon Fibre and as such, it tips the scales at only 123g! Though this handguard will help your MCX lose weight, it does so without compromising on attachment interfaces, offering M-LOK slots at 3, 6, 9 and 12 o'clock and additional slots at the lower offset angles.

Another advantage of the Carbon Fibre handguard is its width of approximately 48mm, allowing you to run an integrally suppressed setup and still make use of your M-LOK slots provided your suppressor is slim enough. The set also includes a short section of aluminium 20mm Picatinny rail for M-LOK pre-installed on the rearmost upper M-LOK slot, designed to seamlessly interface with your receiver rail. If you're seeking a speedy look for your MCX without compromising accessory options, the Airsoft Artisan 10" Carbon Fibre Handguard for MCX Virtus AEG is what you need!

If you've been in an intense firefight and your HASTA Nebula Gen.2 has taken some damage, this should sort it! The Replacement Front Cap for NEBULA Mist Tracer Unit Gen.2 is an original replacement part made from clear polymer, ideal for those who have a damaged front cap.

While a damaged front cap might not stop the Nebula from working, it will make the internals vulnerable to BB impacts. If you're particularly attached to your Nebula Gen.2, we recommend having one of these in the stash for a worst-case scenario!

If you want to mount a Swiss Arms barrel extension/silencer to your Cybergun FNX-45 GBB this is the part you need. This adapter is constructed from aluminium and fits 16mm CW male threaded outer barrels, allowing for a Swiss Arms barrel extension/silencer to be mounted to your FNX-45 Tactical or MK23 pistol.

This Kill Flash for Novritsch 1-4x Variable ''LPVO'' Scope, will keep the glare off your objective lens and give a clearer image; leaving you undistracted to take that all important shot.

When installed, the honey-comb design limits the amount of light being allowed to enter the lens, which on a sunny day will lead to a less fuzzy and distracting image, where you will find it much easier to pick out details/targets. It also functions as a lens protector and can save your precious lens from a couple of BB hits before letting a round through. The other benefit of this kill flash is that it prevents the sun from bouncing off your lens and lighting your lens up like bonfire night - which would massively give your position way.

If you want to style up your M4/AR15 with some interesting small parts, starting with the fire selector isn't a bad shout! Introducing the Custom Safety Selector from Big Dragon, a stylish modern selector moulded from polymer, with an enlarged design and grooves for additional grip which guarantees you won't slip off the selector at a critical moment! This selector could be the icing on the cake that is your latest high-speed M4 build, and provides a vast improvement over standard M4/AR15 selector levers. 

If you want your SSG24 to be more sneaky or you want to light the enemy up with a tracer unit, this thread adapter will do the trick! The 14mm CCW Suppressor Thread Adapter for SSG24 is constructed from CNC machined aluminium and replaces the front barrel cap on the Novritsch SSG24, providing 14mm CCW male barrel threads. These are the most common barrel threads used on Airsoft rifles, so with this adapter installed you have all the options in the world when it comes to customising your SSG24 and making it truly yours.

If you run a GBBR M4/AR-15 and you want an easy way to improve your weapons handling, the Aluminium BAD lever for M4/AR-15 from Big Dragon is what you need! This device attaches to the bolt release catch on the left side of the receiver and allows you to drop the bolt after a reload without having to hit the ping pong paddle, instead you press this lever with your trigger finger. The BAD (Battery Assist Device) also allows you to lock the bolt to the rear without taking your hand off the pistol grip with a push upwards on the lever when the charging handle is pulled back.

AEG users need not feel left out; the BAD can still be mounted to your AEG, but more as an aesthetic touch to mimic real world customised ARs. Compatibility wise, this device may need modification or shimming for a tight fit on any specific platform, so we only recommend this part for experienced users.

A 22mm honey comb kill flash made specifically for the Vortex Crossfire T1-style optic.

If you want to shoot while you shoot, we suggest a sight mounted to your sight! The WADSN LPVO Mount Offset Optic Base is designed to mount to the WADSN LPVO 30mm Scope Mount and provide an instantly accessible red dot sight. This mount base is compatible with RMR, T1 and T2 style sights, and may also fit others. The mount is constructed from aluminium with steel screws, and comes with an Allen key and a Torx key so you don't have to rummage in your toolbox! 

If you need a backup red dot sight to run alongside your scope, the Vector Optics Red Dot Sight Offset 20mm Picatinny Mount will help! This offset red dot sight mount is designed for the Vector Optics TEK Frenzy micro RDS but also works with other micro red dot sights with the Docter footprint/mounting standard.

This mount is for 20mm Picatinny rails and presents your red dot sight at a 45-degree angle, allowing you to quickly rotate your primary to engage sudden, close-range threats. If you've ever missed a kill while adjusting your magnification, this mount paired with a micro red dot sight will stop that happening again!

The VSR/Bar-10 is still an absurdly popular rifle today, only one problem - No bottom RIS rail! Fear not Laylax have just the thing, a 20mm RIS rail that fits over your front Harris lug. Measuring roughly 9.5cm and just under 4 inches, the rail allows you to attach some much needed tactical equipment to your VSR, such as a bipod for additional sniping stability.

Constructed from tough, but lightweight aluminium, the rail is screws in place to the underside of the fore stock. It also comes with a magazine catch so you can still reload as you normally would. Treat yourself and your VSR to some additional tactical upgrades with a rail mount!

If you are upgrading your VSR platform sniper rifle to the max an enlarged bolt handle can help when it comes to pulling back a mighty upgraded spring! With this in mind, Laylax conceived the PSS NEO Bolt Handle, designed for use with the Tokyo Marui VSR-10. This bolt handle should also fit VSR-10 clone sniper rifles but as with any upgrade parts, modification may be necessary.

The bolt handle and base are constructed from aluminium and the bolt handle has machined grooves to make it easier to grip in wet weather. The bolt handle is also at a turned-down angle to ensure it clears your scope, no matter how big it is. Marked on the handle and base are helpful instructions on how to use your rifle, in case you hadn't already figured that out! The laser engravings read "1 LIFT THE BOLT HANDLE" "2 PULL >>>>>>" and "3 FIRE". Thanks for the help, Laylax!

If you love the way the AAP-01 shoots but don't get along with its looks, the Action Army Black Mamba Type A Upper Receiver for AAP-01; CNC Alu belongs on your shopping list! Made from superb quality CNC machined aluminium with steel iron sights, this is the Type A version, furnished with a futuristic hexagonal machined pattern on either side which only adds to its menacing aesthetic.

Up front, the Black Mamba is rocking an aggressive muzzle brake with a dynamic shape which blends seamlessly with the receiver itself, mounting to 14mm CCW male barrel threading at the front. If you want to run a tracer for improved instinct aiming in low light, unscrew the knurled nut at the front to remove the muzzle brake to access the barrel threads.

Up top, we have a pair of adjustable iron sights; a light-enhancing front sight with an adjustable anti-glare rear sight. These sights are fantastic to use and very modern, though the integral 20mm Picatinny rail running between also allows you to mount a red dot sight or scope. On the bottom, we have another built-in 20mm Picatinny rail, ready for your tactical flashlight or aiming laser. The Black Mamba Type A is compatible with both the AAP-01 Assassin and the AAP-01C Shinobi and is what you need to make your AAP stand out!

A set of ten Rubber rail panels for KeyMod rail systems, which provides a protective and grippy surface to improve handling over the weapon, even when using gloves.

If you have switched out the handguard or outer barrel on your M4/AR15 and now it wobbles you need Laylax's barrel shims to firm it up! These shims are basically small discs of aluminium which can be sandwiched between the outer barrel and upper receiver to adjust the fit with various different barrel nuts. If you are building an M4 platform, be it an AEG or GBBR, these handy shims are essential to have in the toolbox if you want a new handguard or outer barrel to fit perfectly at the right place with no wobble whatsoever.

Built from lightweight polymer, these rail panels are designed to cover 20mm RIS / RAS rails and offer a more comfortable grip on your RIF.

Built from lightweight polymer, these rail panels are designed to cover 20mm RIS / RAS rails and offer a more comfortable grip on your RIF.

The Novritsch Hi-Capa thread adapter is exactly what you need for mounting barrel attachments to your trusty Hi-Capa Airsoft pistols. The adapter features 12mm CCW threading on one side and 14mm CCW on the other. The 12mm threading screws into your Hi-Capas outer barrel and the 14mm threading is then ready for most common muzzle devices, suppressors or tracer units.

Customise your Hi-Capas look or improve its performance in-game using the Novritsch Hi-Capa Thread Adapter to mount your preferred muzzle device.

A mounting plate designed to fit to allow the attachment of backup and red dot sights to TM based Hi-Capa 5.1 pistols. The plate attaches to the pistol by replacing the rear sight, and using the existing screws secures into place. The backup sight plate is constructed from lightweight yet durable 6061-T6 Aluminium Alloy and secures your sight securely to your pistol.

This mount is perfect for those Airsoft skirmishers who are looking to attach a red dot or backup sight to their pistol in order to make more accurate and quicker snap shots to get an advantage whilst playing.

If you're looking for a replacement for your APS AK's folding stock button you are in luck! The APS AK Folding Stock button is designed for the APS AKS-74 AEG series and is a 1:1 replacement part made by APS themselves. The button includes the latch to hold the stock in the deployed position and is constructed from alloy with a steel spring. 

Give yourself some extra sling points with the Novritsch M-LOK QD Point, this alloy mount attaches to M-LOK rail interfaces. It provides you with some additional mounting or attachment options in the form of multiple QD sling points. With this QD point, you can set up unique and unusual sling options, such as a minigun with a double sling point!

The Novritsch M-LOK QD Point is perfect for those looking for additional sling options, just remember to get the QD loops separately!

The Novritsch SSG10 Full Top Rail Gen.2 allows you to extend your top rail so you can mount any optic you desire atop your Novritsch SSG10. It is a 20mm Picatinny rail so will comfortably harbour most of the common scopes and sights found on the market. The rail screws into the top of your SSG10 receiver with the 4 screws provided, this keeps it securely attached to your sniper rifle, even with the chunkiest of scopes attached!

Make your SSG10 uniquely yours with the Novritsch SSG10 Full Top Rail Gen.2 and mount the perfect scope onto this rail to accommodate your sniping needs.

A replacement ergonomic grip for AK Platform Series AEGs, giving you a comfortable and larger surface area to hold onto, giving you better control over your Airsoft weapons.

A replacement grip for AK platform series GBB rifles, giving you a larger surface area to hold onto and better weapons handling.

If you have had a mishap and scratched the lower receiver of your ARCTURUS full metal M4 platform we have just what you need to make it pretty again! The ARCTURUS alloy Lower Receiver For M4/AR15 AEG is an original replacement part for the ARCTURUS full metal M4 AEG series intended to replace a scratched or otherwise damaged lower. The lower receiver doesn't include any of the controls, body pins or trim parts so you will need these parts from your original lower to complete it.

Compatibility wise this part is intended only for the ARCTURUS full metal M4/AR15 AEG line and is unlikely to work with other brands' upper receivers.

If you've put a strong spring in your SSG10 and want to cock it easily, the Novritsch Enlarged Bolt Handle for SSG10 is what you need! Constructed from aluminium with a deeply textured surface, this bolt handle is designed to provide extra purchase for easier cocking and faster follow-up shots.

The Enlarged Bolt Handle is also shaped to provide clearance for any optical sight you may have mounted, avoiding smashing your knuckles on your scope when working in a hurry. Whether you need more grip on your SSG10 for wet weather skirmishes or faster follow up shots the Novritsch Enlarged Bolt Handle is ideal for the job!