Delta Armory Airsoft

If you're running a Delta Armory DA-P series EU17 GBB pistol and want to reload faster, this is the key! The Delta Armory Extended Magazine Catch for P-Series GBB is constructed from high density polymer, designed specifically for the DA-P series but potentially compatible with other Gen.3 style EU17 frames (no guarantees though!).

This extended magazine release features a textured surface for optimal grip in all weather and is much wider than the standard mag release, making it easier to reach for smaller hands. The set includes the entire mag release assembly other than the spring, though the original mag release spring used in the DA-P series is a perfect fit. A super affordable upgrade to make pistol handling much easier, this Extended Magazine Catch is just what you need to speed up your reloads!

If you want to get into Airsoft skirmishing but don't know where to start, start here! The Delta Armory CHARLIE™ Full Starter Pack includes the DA-B04, a lightweight, pre-upgraded M4/AR-15 AEG with a sneaky style, two additional mid-cap magazines and everything else you need to get busy in game!

The set includes the DA-B04, 2 extra 120rnd Mid-caps, a Tactical Vest, a pair of NUPROL Pro Mesh Goggles, a NUPROL Tactical Half Face Mask, a speed loader, Delta Armory 0.25g BBs, a Ni-MH battery, charger & a Battery charging bag; giving you everything you need to get off to a flying start on your Airsoft adventure. We recommend a Gun Bag or Hard Case to transport your pride and joy and some good footwear, but other than that, you are good to go!

If you need BBs for a mix of CQB and outdoors, 0.25g BBs are what you need! The Delta Armory 0.25g Diamond 6mm BBs are supplied in a resealable bag of 4000 and are high-grade polished BBs to ensure reliable feeding and maximum accuracy potential. 

If you're looking for high-grade 0.25g BIO BBs, the Delta Armory 0.25g Diamond 6mm BIO BBs are ideal. Supplied in a resealable bag of 4000, Delta's Diamond BBs are high-grade polished 6mm BBs with tight tolerances to ensure reliable feeding and maximum accuracy potential. 

These are the BIO version, meaning they're made from biodegradable PLA polymer which allows you to magdump all day long with a clear conscience out in the wonderful woodlands. Being 0.25g in weight, these BBs are suitable for practically any Airsoft platform shooting within standard skirmish energy limits (<1.14 joules) and their ultra-tight tolerances should provide superb accuracy potential!

If you need affordable Mid-cap magazines for your M4/AR-15 AEG you're going to want to check this out! The Delta Armory 120rnd DMAG Mid-cap Magazine is designed to fit M4/AR-15 AEGs and is styled after a well-known polymer real steel magazine, complete with waffle-style gripping texture.

The magazine is loaded just like any other Airsoft mid-cap, through the fill/feed port at the top of the magazine body using a speed loader or loading tool. The magazine is also marked on either side with the capacity (120) and the Delta Armory logo. If you need cheap M4 mags to complete your loadout, this is as cheap as they come!

If you need BBs for outdoor skirmishes, 0.28g BBs are what you need! The Delta Armory 0.28g Diamond 6mm BBs are supplied in a 1KG resealable bag of 3571 BBs approximately and are high-grade polished BBs to ensure reliable feeding and maximum accuracy potential. 

If you're searching for a modern vertical foregrip with slick styling and flawless handling, the Delta Armory B5 Vertical Foregrip for 20mm Picatinny Rails is ideal. This vertical grip is available in two styles; short for those who like to use the "C-clamp" or thumb-over-bore grip and long for more traditional vertical grip holds. Each style includes grippy crackle texture on each side and linear serrations on the front, giving you ample traction without becoming uncomfortable without gloves.

The B5 mounts to 20mm Picatinny rails via its steel mounting apparatus and also includes a storage compartment inside, ideal for tactical snacks to keep energy high or accessory batteries for long-duration operations. If you want more control over your primary when sweeping rapidly between targets, the Delta Armory B5 Vertical Foregrip for 20mm Picatinny Rails will do the trick!

If you're searching for a modern vertical foregrip with slick styling and flawless handling, the Delta Armory B5 Vertical Foregrip for 20mm Picatinny Rails is ideal. This vertical grip is available in two styles; short for those who like to use the "C-clamp" or thumb-over-bore grip and long for more traditional vertical grip holds. Each style includes grippy crackle texture on each side and linear serrations on the front, giving you ample traction without becoming uncomfortable without gloves.

The B5 mounts to 20mm Picatinny rails via its steel mounting apparatus and also includes a storage compartment inside, ideal for tactical snacks to keep energy high or accessory batteries for long-duration operations. If you want more control over your primary when sweeping rapidly between targets, the Delta Armory B5 Vertical Foregrip for 20mm Picatinny Rails will do the trick!

If you're an outdoor skirmisher with a long-range-focussed setup, Delta Armory 0.32g Diamond 6mm BIO BBs are what you need to feed it! These finely polished Airsoft BBs are constructed from a biodegradable polymer and flawlessly polished for maximum accuracy and reliable feeding. 

Supplied in a resealable bag containing approximately 3120 BBs, these bio BBs have uncompromisingly tight tolerances of +/- 0.01mm with a guaranteed weight difference not exceeding 0.01g. If you need a bio BB with the perfect combination of heavy weight, affordable price and tight tolerances, Delta Armory's 0.32g Diamond 6mm BIO BBs are exactly that!

If you're attached to your optic and don't want to see it shot out, a Lens Protector is what you need! The Delta Armory Lens Protector for 20mm Picatinny Rails is designed to mount in front of your optic and take the hit so your sight stays safe. The protector can be flipped down for storage and is constructed from Perspex with an alloy mount. 

If you're worried about getting your optic shot out, this is a far cheaper alternative to buying a new optic should the worst happen. If you'd rather replace a lens protector than your favourite optic if you get unlucky next skirmish, the Delta Armory Lens Protector for 20mm Picatinny Rails is essential!

If you're attached to your optic and don't want to see it shot out, a Lens Protector is what you need! The Delta Armory Lens Protector for 20mm Picatinny Rails is designed to mount in front of your optic and take the hit so your sight stays safe. The protector can be flipped down for storage and is constructed from Perspex with an alloy mount. 

If you're worried about getting your optic shot out, this is a far cheaper alternative to buying a new optic should the worst happen. If you'd rather replace a lens protector than your favourite optic if you get unlucky next skirmish, the Delta Armory Lens Protector for 20mm Picatinny Rails is essential!

If you're looking for lower face protection with more flexibility than full-mesh designs, the Delta Armory Mesh Lower Face Mask Gen.2 is ideal. This mesh lower face mask has fabric sides, intended to provide a great balance between protective qualities and comfort, allowing you to get a cheek weld on the stock of your primary without any awkward neck movements. The harness of the Mesh Lower Face Mask Gen.2 is fully adjustable, making it suitable for practically any head size. 

Available in a vast range of camo and solid colour options to suit any loadout, the Mesh Lower Face Mask Gen.2 works with helmets and communications headsets seamlessly, though will require a bit of fiddling for optimal comfort. If you're looking for a more flexible alternative to your usual lower face protection, the Delta Armory Mesh Lower Face Mask Gen.2 is what you need!

If you're looking for lower face protection with more flexibility than full-mesh designs, the Delta Armory Mesh Lower Face Mask Gen.2 is ideal. This mesh lower face mask has fabric sides, intended to provide a great balance between protective qualities and comfort, allowing you to get a cheek weld on the stock of your primary without any awkward neck movements. The harness of the Mesh Lower Face Mask Gen.2 is fully adjustable, making it suitable for practically any head size. 

Available in a vast range of camo and solid colour options to suit any loadout, the Mesh Lower Face Mask Gen.2 works with helmets and communications headsets seamlessly, though will require a bit of fiddling for optimal comfort. If you're looking for a more flexible alternative to your usual lower face protection, the Delta Armory Mesh Lower Face Mask Gen.2 is what you need!

If you're looking for lower face protection with more flexibility than full-mesh designs, the Delta Armory Mesh Lower Face Mask Gen.2 is ideal. This mesh lower face mask has fabric sides, intended to provide a great balance between protective qualities and comfort, allowing you to get a cheek weld on the stock of your primary without any awkward neck movements. The harness of the Mesh Lower Face Mask Gen.2 is fully adjustable, making it suitable for practically any head size. 

Available in a vast range of camo and solid colour options to suit any loadout, the Mesh Lower Face Mask Gen.2 works with helmets and communications headsets seamlessly, though will require a bit of fiddling for optimal comfort. If you're looking for a more flexible alternative to your usual lower face protection, the Delta Armory Mesh Lower Face Mask Gen.2 is what you need!

If you need more ammo between reloads, a high-cap magazine will do the trick! The Delta Armory 300rnd High-Cap Magazine for M4/AR-15 AEGs is styled after a famous polymer magazine, making it well suited to any modern M4/AR-15 AEG build. As with other high-cap mags, the winding wheel is located on the baseplate and the fill window is on the top.

To load the mag, simply open the hatch on top, pour your BBs in, wind the winding wheel 5-10 times, insert the mag and you're ready to shoot! If you prefer putting down rounds over reloading, a couple of these will give you what you need!

If you're tricking out your M4/AR-15 AEG, the Delta Armory Pistol Grip for M4/AR-15 AEGs is a great affordable option! Available in 3 styles to suit any aesthetic or ergonomic preference, these grips are standard M4/AR-15 AEG pattern and should fit any M4/AR-15 AEG which follows the original Tokyo Marui build style. 

If you're tricking out your M4/AR-15 AEG, the Delta Armory Pistol Grip for M4/AR-15 AEGs is a great affordable option! Available in 3 styles to suit any aesthetic or ergonomic preference, these grips are standard M4/AR-15 AEG pattern and should fit any M4/AR-15 AEG which follows the original Tokyo Marui build style. 

If you're tricking out your M4/AR-15 AEG, the Delta Armory Pistol Grip for M4/AR-15 AEGs is a great affordable option! Available in 3 styles to suit any aesthetic or ergonomic preference, these grips are standard M4/AR-15 AEG pattern and should fit any M4/AR-15 AEG which follows the original Tokyo Marui build style. 

If you need more capacity but don't want to carry 10 mags, the Delta Armory 300rnd Steel High-Cap Magazine for M4/AR-15 AEGs will keep you sweet! This wheel-wound high-capacity magazine holds 300 BBs and replicates the real steel NATO STANAG 30rnd mag with its stamped steel shell. Compatibility-wise, this mag should fit in the vast majority of M4/AR-15, SCAR-L and L85/SA80 AEGs. 

Like other Airsoft high-caps, this magazine is loaded through the fill window on the top of the magazine body. First, pull open the hatch, then pour your BBs in. With this done, wind the winding wheel on the baseplate to tension the mag and you're ready to rock. If you need more capacity but don't want to compromise agility with a rig full of magazines, the Delta Armory 300rnd Steel High-Cap Magazine for M4/AR-15 AEGs is what you need!

If you need affordable Mid-cap magazines for your M4/AR-15 AEG you're going to want to check these out! The Delta Armory 130rnd STANAG Mid-cap Magazine is designed to fit M4/AR-15 AEGs and is styled after the STANAG magazine, a standard issue magazine for M4, L85/SA80, SCAR-L, HK416 rifles used in NATO militaries, amongst many others. 

The magazine is loaded just like any other Airsoft mid-cap, through the fill/feed port at the top of the magazine body using a speed loader or loading tool. If you need cheap M4 mags to complete your loadout, this is as cheap as they come!

If your M4/AR-15 AEG is a bit scratched up, the Delta Armory Receiver Set for M4/AR-15 AEG will sort that out! This set includes the upper and lower receiver, fire selector switch and front receiver pin, available in high density polymer or alloy construction. If you're working on a lightweight build, the polymer version is ideal. If you want weight and realism, you want the metal version!

Styling-wise, this receiver set is Delta's own design, inspired by real steel "Billet" receivers found on high-end, ultra-modern real steel AR builds. The trigger guard is enlarged and built-in, improving strength when compared to milspec receiver designs, in line with the latest real steel ARs hitting the market. As we might expect, we are treated to a 20mm Picatinny receiver rail running along the top, ready for a red dot sight, scope or iron sights. 

If you're building from scratch, you will need a charging handle, magazine release, dust cover and mock rear pin to complete the receiver itself, along with your internals and pistol grip. While we can make no guarantees, parts from most other brands should fit this receiver without issues. Whether you need a bargain receiver for a scratch build or want to change the build style of an existing M4/AR-15 AEG, the Delta Armory Receiver Set for M4/AR-15 AEG will do the trick!

If you're in search of the perfect mid-range scope then you are in luck! The Delta Armory 1.5-5X40BE LPVO Rifle scope w/ Flip-up lens caps is exactly what you are looking for. This magnified riflescope is an LPVO (Low Power Variable Optic), meaning it offers variable magnification from 1.5x up to 5x, ideal for short and medium-range engagements mounted on an assault rifle, DMR or sniper rifle. 

The 1.5-5X40BE offers windage and elevation adjustment via a pair of capped turrets, along with a choice of a red, green or blue reticle with 3 brightness settings and a fast focus dial at the rear of the eyeball so you can get a clear view at different engagement ranges. With a dual ring mount for 20mm Picatinny rails, this LPVO is ready to rock straight out of the box!

If you need a bit more height on your optic for a clear view with full face protection, the Delta Armory 3-Slot 20mm Picatinny Riser Mount for Red Dot Sights will do the trick. This riser mount provides a 3-slot 20mm Picatinny rail approximately 1 inch (25mm) above the surface of the rail it is mounted to, raising the optic to M4/AR-15 height over bore. This means it will align perfectly with an M4/AR-15 front sight post and most flip-up iron sights; ideal for those who like to "co-witness" their optic and irons. 

If you find you have to bend your neck to get a good view down your red dot sight, a riser is what you need. This riser can be mounted to any 20mm Picatinny railed receiver and is ideal for small "micro red dot sights" like the T1/2 and Docter/RMR style red dot sights due to its compact size.

Whether you are working on a military-style build or want a red dot sight with a uniquely tough exterior, the Delta Armory Holo-552 Style Red Dot Sight is well suited to your needs. Constructed from aluminium with an integrated 20mm Picatinny rail mount, the Holo-552 is ready to be mounted on any Airsoft gun with a 20mm Picatinny top rail and is set at the perfect height for use with a flip-to-side magnifier. 

Offering the iconic multi-function reticle matching the real thing perfectly with a choice of red or green colour options via the "NV" button, the Holo-552 allows you to shoot fast up close using only the outer ring of the reticle or take precise shots using either of the two central dots at longer ranges. Reticle brightness is fully adjustable, with 5 settings for each colour so you can set it perfectly for the ambient lighting conditions. If your next attachment is going to be a red dot and you appreciate the military styling of the iconic Holographic Sight, the Holo-552 from Delta Armory is a fine choice!

If you're in search of a cheap red dot sight with a wide field of view, the Delta Armory 1x30 Red Dot Sight is exactly that. Boasting an integral 20mm Picatinny mount, 5 brightness settings with either a red or green dot and a whopping 30mm objective lens, this red dot sight is ready to mount and cheap as chips, even packaged with a CR2032 3V Button cell to get you up and running straight out of the box. 

If you're looking for a lightweight, affordable AEG platform, whether this is your first AEG or another for the arsenal, the DA-C07 CHARLIE™ from Delta Armory is one of the best options out there. Constructed from strong high density polymer for a lightweight and agile build with an alloy outer barrel to add strength where needed, this is the stealthy styled option from the Delta Armory CHARLIE™ line, known as the "KeyMod Predator".

The DA-C07 comes kitted out with an aluminium micro suppressor, a KeyMod-style handguard with removable proprietary 20mm rail sections, a 20mm railed receiver ready for a red dot sight or scope, an ergonomic pistol grip styled after one of the most modern real steel AR grips and the unique Delta Armory battery stock with a generously sized battery compartment and built-in QD sling sockets.

Inside, it gets even better! The reinforced version 2 gearbox boasts a quick change spring guide, an SHS piston and tappet plate, 7mm bushings and a steel 18:1 gearset. To add some accuracy and range into the mix, the DA-C07 boasts a 6.03mm tightbore inner barrel and rotary HOP-up unit, giving you some of the best internal options pre-installed. If you were holding back on buying an affordable AEG because you're worried it can't compete, the DA-C07 will surprise you!

If you're looking for a safer alternative to LiPo batteries without compromising on trigger response or rate of fire, the 9.6V 1600mAh NiMH Crane Stock Battery from Delta Armory is a great choice. This 8-cell NiMH battery comes pre-wired with a mini-Tamiya connector and is arranged in two cell groups - commonly known as a "nunchuck" or "crane stock" configuration. This layout makes it ideal for fitting into the side compartments of crane stocks and similar designs like the Delta Armory Stock and PTS EPS Stock.

As with all NiMH batteries, it must only be charged using a suitable NiMH charger, and it should never be left unattended while charging. For added safety, we strongly recommend charging your batteries inside a Battery Safe Charging Bag. With a capacity of 1600mAh, this battery can keep most AEGs with a mini-Tamiya connector running strong for several hours of high-intensity play. However, if you're expecting to be out all day, carrying a spare is a smart way to ensure you don't miss any of the action!

If you're looking for a sleek handguard for your M4/AR-15 build, the Delta Armory CNC Aluminium KeyMod Handguard for M4/AR-15 is one to watch. This handguard is CNC machined from aluminium and offers KeyMod negative space attachment slots at the 3, 6, and 9 o'clock positions with 20mm Picatinny rail running along the top, giving you plenty of accessory options to go with its high-speed styling.

Being a free-floated design means this handguard doesn't come into contact with the outer barrel, meaning no negative effects on accuracy regardless of any force applied. Offered in 12.5" or 15" lengths, the KeyMod handguard is ideal for DMR builds and other long-range setups, pairing well with a 14.5 or 16-inch barrel.

The set also includes an aluminium barrel nut pre-installed inside the handguard so no need to worry about sourcing the right nut. Naturally, this handguard is only for M4/AR-15 platforms and we recommend using an M4/AR-15 barrel nut wrench for the installation process. If you're working on a carbine-length M4 and want a uniquely sleek handguard, the Delta Armory CNC Aluminium KeyMod Handguard for M4/AR-15 is ideal!

If you're looking for a red dot sight with a modern look, the Delta Armory Micro Red Dot Sight PRO with Riser should fit the bill. This red dot sight is styled after the real steel T1 micro red dot sight but with slight changes in the external design, including a canted illumination dial to reduce peripheral vision obstructions. The 20mm Picatinny mount is also integral, providing a stronger overall unit with the sacrifice that it cannot be used on T1 footprint mounts. 

The Micro Red Dot Sight PRO offers 11 brightness settings, making it ideal for both bright sunlight and gloomy CQB environments. Windage and elevation adjustment is provided by a pair of capped turrets, requiring a flathead screwdriver to apply adjustments. The set includes the sight itself and a 20mm Picatinny rail riser, meaning if you're running an M4 platform you don't need to source the riser separately so you can actually see down your sight. 

If you're looking for the cutting-edge micro red dot sight look for your primary, the Delta Armory Micro Red Dot Sight PRO with Riser is both affordable and effective!

If you're putting together an M4/AR-15 AEG from scratch or you want to add a sliding stock to your fixed stock rifle, this buffer tube should help! The Buffer Tube for M4/AR-15 AEG from Delta Armory is constructed from alloy and compatible with most M4/AR-15 AEGs on the market. The tube provides 6 positions of adjustment for whichever M4/AR-15 AEG sliding stock you choose to mount, allowing you to collapse the stock for storage or close-range engagements. 

The set includes the buffer tube itself, the castle nut (non-functional) and the bolt required to mount the buffer tube. This is a standard TM clone buffer tube design and should fit most M4/AR-15 AEGs without issue, though as with any external mod, there may be slight fitting which needs to be carried out.