Name: Jing Gong JG111 T3 K2 RIS G3 Custom Assault Rifle
Brand: Jing Gong
SKU: PR009795
Price: 169.99 GBP
Availability: OutOfStock

Jing Gong JG111 T3 K2 RIS G3 Custom Assault Rifle

Code: …

£169.99

Quantity

Sliding Stock System
20mm Railed Handguard
Based on the G3 Assault Rifle

A replica of the G3 with tactical modifications to give the gun a new feel and bring it into the modern era. With a sliding stock and railed handguard the rifle can be adjusted to a range of scenarios.

Full description

Delivery & Returns

Delivery & Postage

Here at Patrol Base we ship worldwide, delivering not only to the UK but to most of the EU and select Worldwide locations as well. We provide a working day-by-road service via our handpicked courier services, simply buy your Airsoft guns with us and we'll have them delivered directly to your door.

For more information and to see the country we deliver please check out our Delivery Information Page.

Estimates

Below are some rough postage prices for orders. Please note these are subject to change and are only a rough guide. For a more accurate postage estimate please use the Postage Calculator at the basket.

UK Standard

£6.95

Approx.

UK Next Day

£8.95

Approx.

Highlands / Islands

£24.99*

Approx.

Saturday

£14.95

Approx.

* Scottish Highlands, Islands, and EU post prices can vary wildly. Prices range from £8.99 to £29.99, so please ensure you refer to the Postage Calculator at the basket for the lowest possible price.

Returns

We want you to be delighted with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.

You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.

For more information on returning products, and how to do it please visit our Returns Policy Page.

Description

The replica is built from heavy duty materials, with an alloy handguard, outer barrel, stock and internals, with a polymer receiver, pistol grip, and internals, and a rubberised butt plate. The gun is powered by battery, which uses an Airsoft v2 Gearbox to propel the BBs from the barrel, this allows the weapon to function in both semi and fully automatic firing modes.

The replica features a 20mm RIS / RAS railed hand guard which allows you to attach a range of aftermarket parts and accessories, with 20mm being the most popular, allowing for the attachments of grips, bipods, launchers and other tactical equipment. The replica's flash hider is also removable to reveal a 14mm CCW thread allowing silencers and suppressors to be attached.

The replicas battery is stored within the handguard, allowing space for a stick or butterfly / crane stock style LiPo battery, or alternatively the wires can be guided through a cut slot on the bottom of the rail to allow the wires to be passed through and fed into a PEQ or other form of battery container.

This replica is perfect for those who want an old-school classic, but want to be able to use all their modern attachments and accessories. Grab yourself a bit of history which has been dragged into the modern era.

Features

Based on the Jing Gong G3 / T3 Series
Customised 20mm RIS / RAS handguard
Sliding two position stock
Removable flash hider to reveal a 14mm CCW thread
Safe / Semi / Fully Automatic firing modes
500rnd high capacity wheel wound magazine included
Handguard features slot for threading battery wires
Insert the battery behind the handguard or externally in a PEQ box
Integrated front and rear Iron sights
Ambidextrous magazine release
V2 Battery Powered Gearbox
Adjustable Hop-up unit for range and accuracy
Front and rear sling loops
Rubberised stock butt plate
Finger ridged pistol grip
Large trigger guard for glove users

Package Includes

JG111 T3 K2 RIS G3 Custom Assault Rifle
Magazine

Special Instructions

To access the battery you must first remove the handguard. Ensure you first remove the two screws at the rear of the handguard on the left and right hand sides, and then the front pin.

Please note that the battery which comes with the rifle is a free gift for testing, and will not fit into the replica. This is for testing the replica. If you wish to use the sample battery you will need a large external peq box, though we recommend immediately replacing it with a higher quality 7.4v LiPo battery.

Specification

General

Weapon Type	Assault Rifle
Over 18	Yes
Defence / UKARA Required	Yes, No,
FPS (Feet Per Second), using 0.20g BB	Approx. 348fps ± 10%, using 0.20g BB
Site Legal, using 0.20g BB	Yes
Pre-Built	Yes
Included Items	Magazine EU Pin Charger Sample Battery
User Skill Level	Regular Player

Weight and Dimension

Weight (KG)	Approx. 3.105kg
Length (Collapsed)	84cm
Length (Extended)	102cm

Construction

Primary Colour	Black
Pre Two-Toned	No
Construction	Alloy Handguard, Outer Barrel, Stock and Internals, with a Polymer Receiver, Pistol Grip, and Internals, with Rubberised Butt Plate
External Construction	Polymer Alloy Rubber
Internal Construction	Polymer Alloy

Weapon Specific

Powered By	Electric
Blowback	None
Weapon Platform	G3
Magazine Style	G3 Series
Fire Selector	Safe Semi Automatic Full Automatic
Safety Features	Trigger Lock
Shooter Configuration	Right Handed
Weapon Configuration	Standard
Weapon Scale	1:1
Suggested BB Weight	0.25g

Hop-Up

Hop-Up Unit	Yes
Hop-Up Adjuster	Rotary
Hop-Up Location	Behind mock bolt cover when charging handle to the rear

Furniture

Furniture	Railed Handguard Finger Ridged Pistol Grip Ambidextrous Magazine Release Integrated Sight Sliding Stock
Rail System	20mm RIS / RAS
Stock Setting	Sliding
Stock Positions	2 Position
Sight Type	Iron Sights
Sling Options	Loop , Receiver , Barrel,

Barrel

Outer Barrel Thread Type	Male
Outer Barrel Thread Direction	CCW (Counter Clockwise)
Outer Barrel Thread Size	14mm
Inner Barrel Length	509mm

Magazine Specific

Magazine Type	High Capacity, Wheel Wound, AEG,
Magazine BB Capacity	Approx. 500 Rounds
Magazine BB Fill Method	Fill Window
Magazine BB Fill Location	Top

Electric Gun Specific Information

Gearbox

Gearbox Version	V2 Gearbox
Gearbox Wiring	Front Wired
Gearbox Quick Change Spring	No
Gearbox Electronic Trigger	No
Split Gearbox Design	No

Motor

Motor Type	Standard

Battery Specific

Battery Connector	Mini Tamiya

Included Battery

Battery Configuration	Block
Battery Type	Ni-Mh
Battery Voltage	8.4V
Battery Amperage	1100mAh

Compatible Battery

Compatible Battery Type	Li-Po
Compatible Battery Configuration	Crane
Compatible Battery Voltage	7.4v

Product Testing Data

Test Description	Tested using 0.20g BB @ 13c
Tested Using	ASG Blaster 0.20g BB
Test Date	06/06/19

Size guide

Joule Charts

Special Instructions

These table can be used as a reference to see if the BB weight you are using will be over acceptable Joulage limits at some Airsoft Sites in the UK. To check if the weight can be used chrono your weapon using the BB you intend to use, and then compare it to the chart.

FPS, Power and Joule Limits can vary from site to site, so please get in touch with where you're going to play with in advance to avoid disappointment.

Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, with a 350fps limit for Automatic Replicas, 400fps for Semi-Automatic Replicas, and 500fps for Bolt Action Replicas.

Tap the tabs below to open the relevant chart for your replica.

This table should be used for reference, and cannot be used to check one weight against another, as the weight of the BB affects the power.

In order to check if the BB can be used with your replica chronograph using the weight you wish to use and then compare it against the table.

Every time you change weights you will need to re-chrono and check against the table. This is not a conversion chart between weights.

Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, and is the equivalent of 350fps, using 0.20g BB resulting in an upper limit of 1.14j.

Velocity	BB Weight (Grams)
FPS	0.20	0.25	0.28	0.30	0.32	0.36	0.40	0.43	0.45	0.50
250	0.58	0.73	0.81	0.87	0.93	1.05	1.16	1.25	1.31	1.45
260	0.63	0.79	0.88	0.94	1.00	1.13	1.26	1.35	1.41	1.57
270	0.68	0.85	0.95	1.02	1.08	1.22	1.35	1.46	1.52	1.69
280	0.73	0.91	1.02	1.09	1.17	1.31	1.46	1.57	1.64	1.82
290	0.78	0.98	1.09	1.17	1.25	1.41	1.56	1.68	1.76	1.95
300	0.84	1.05	1.17	1.25	1.34	1.51	1.67	1.80	1.88	2.09
310	0.89	1.12	1.25	1.34	1.43	1.61	1.79	1.92	2.01	2.23
320	0.95	1.19	1.33	1.43	1.52	1.71	1.90	2.05	2.14	2.38
325	0.98	1.23	1.37	1.47	1.57	1.77	1.96	2.11	2.21	2.45
328	1.00	1.25	1.40	1.50	1.60	1.80	2.00	2.15	2.25	2.50
330	1.01	1.26	1.42	1.52	1.62	1.82	2.02	2.18	2.28	2.53
335	1.04	1.30	1.46	1.56	1.67	1.88	2.09	2.24	2.35	2.61
340	1.07	1.34	1.50	1.61	1.72	1.93	2.15	2.31	2.42	2.68
345	1.11	1.38	1.55	1.66	1.77	1.99	2.21	2.38	2.49	2.76
350	1.14	1.42	1.59	1.71	1.82	2.05	2.28	2.45	2.56	2.85
355	1.17	1.46	1.64	1.76	1.87	2.11	2.34	2.52	2.63	2.93
360	1.20	1.51	1.69	1.81	1.93	2.17	2.41	2.59	2.71	3.01

Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 400fps, using 0.20g BB resulting in an upper limit of 1.49j.

Velocity	BB Weight (Grams)
FPS	0.20	0.25	0.28	0.30	0.32	0.36	0.40	0.43	0.45	0.50
250	0.58	0.73	0.81	0.87	0.93	1.05	1.16	1.25	1.31	1.45
260	0.63	0.79	0.88	0.94	1.00	1.13	1.26	1.35	1.41	1.57
270	0.68	0.85	0.95	1.02	1.08	1.22	1.35	1.46	1.52	1.69
280	0.73	0.91	1.02	1.09	1.17	1.31	1.46	1.57	1.64	1.82
290	0.78	0.98	1.09	1.17	1.25	1.41	1.56	1.68	1.76	1.95
300	0.84	1.05	1.17	1.25	1.34	1.51	1.67	1.80	1.88	2.09
310	0.89	1.12	1.25	1.34	1.43	1.61	1.79	1.92	2.01	2.23
320	0.95	1.19	1.33	1.43	1.52	1.71	1.90	2.05	2.14	2.38
330	1.01	1.26	1.42	1.52	1.62	1.82	2.02	2.18	2.28	2.53
340	1.07	1.34	1.50	1.61	1.72	1.93	2.15	2.31	2.42	2.68
350	1.14	1.42	1.59	1.71	1.82	2.05	2.28	2.45	2.56	2.85
360	1.20	1.51	1.69	1.81	1.93	2.17	2.41	2.59	2.71	3.01
370	1.27	1.59	1.78	1.91	2.03	2.29	2.54	2.73	2.86	3.18
380	1.34	1.68	1.88	2.01	2.15	2.41	2.68	2.88	3.02	3.35
390	1.41	1.77	1.98	2.12	2.26	2.54	2.83	3.04	3.18	3.53
400	1.49	1.86	2.08	2.23	2.38	2.68	2.97	3.20	3.34	3.72
410	1.56	1.95	2.19	2.34	2.50	2.81	3.12	3.36	3.51	3.90

Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 500fps, using 0.20g BB resulting in an upper limit of 2.32j.

Velocity	BB Weight (Grams)
FPS	0.20	0.25	0.28	0.30	0.32	0.36	0.40	0.43	0.45	0.50
250	0.58	0.73	0.81	0.87	0.93	1.05	1.16	1.25	1.31	1.45
260	0.63	0.79	0.88	0.94	1.00	1.13	1.26	1.35	1.41	1.57
270	0.68	0.85	0.95	1.02	1.08	1.22	1.35	1.46	1.52	1.69
280	0.73	0.91	1.02	1.09	1.17	1.31	1.46	1.57	1.64	1.82
290	0.78	0.98	1.09	1.17	1.25	1.41	1.56	1.68	1.76	1.95
300	0.84	1.05	1.17	1.25	1.34	1.51	1.67	1.80	1.88	2.09
310	0.89	1.12	1.25	1.34	1.43	1.61	1.79	1.92	2.01	2.23
320	0.95	1.19	1.33	1.43	1.52	1.71	1.90	2.05	2.14	2.38
330	1.01	1.26	1.42	1.52	1.62	1.82	2.02	2.18	2.28	2.53
340	1.07	1.34	1.50	1.61	1.72	1.93	2.15	2.31	2.42	2.68
350	1.14	1.42	1.59	1.71	1.82	2.05	2.28	2.45	2.56	2.85
360	1.20	1.51	1.69	1.81	1.93	2.17	2.41	2.59	2.71	3.01
370	1.27	1.59	1.78	1.91	2.03	2.29	2.54	2.73	2.86	3.18
380	1.34	1.68	1.88	2.01	2.15	2.41	2.68	2.88	3.02	3.35
390	1.41	1.77	1.98	2.12	2.26	2.54	2.83	3.04	3.18	3.53
400	1.49	1.86	2.08	2.23	2.38	2.68	2.97	3.20	3.34	3.72
410	1.56	1.95	2.19	2.34	2.50	2.81	3.12	3.36	3.51	3.90
420	1.64	2.05	2.29	2.46	2.62	2.95	3.28	3.52	3.69	4.10
430	1.72	2.15	2.40	2.58	2.75	3.09	3.44	3.69	3.86	4.29
440	1.80	2.25	2.52	2.70	2.88	3.24	3.60	3.87	4.05	4.50
450	1.88	2.35	2.63	2.82	3.01	3.39	3.76	4.04	4.23	4.70
460	1.97	2.46	2.75	2.95	3.15	3.54	3.93	4.23	4.42	4.91
470	2.05	2.57	2.87	3.08	3.28	3.69	4.10	4.41	4.62	5.13
480	2.14	2.68	3.00	3.21	3.42	3.85	4.28	4.60	4.82	5.35
490	2.23	2.79	3.12	3.35	3.57	4.02	4.46	4.80	5.02	5.58
500	2.32	2.90	3.25	3.48	3.72	4.18	4.65	4.99	5.23	5.81
510	2.42	3.02	3.38	3.62	3.87	4.35	4.83	5.20	5.44	6.04

Showroom