- Full Licenced by FN Herstal
- Quick Change Spring System
- Krytac in-line MOSFET pre-installed
There has been a lot of fuss made about this particular AEG online, and let us tell you, the hype is real. The Krytac P90 AEG combines the P90s radical design with Krytac's industry expertise to produce the best performing P90 out there, with an unrivalled feature set and bomb-proof internals.
Fast Delivery
Delivery & Postage
Here at Patrol Base we ship all around world, with delivery not only to the UK, but to most of the EU and select Worldwide locations as well. We provide a working day by road service via our handpicked courier services, simply buy your Airsoft guns with us and we'll have them delivered directly to your door.
For more information and to see the country we deliver please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change, and are only a rough guide. For more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£4.95
Approx.
UK Next Day
£6.95
Approx.
Highlands / Islands
£12.99*
Approx.
EU
£12.99+*
Approx.
* Please note that Scottish Highlands, Islands and EU post prices can vary wildly. Prices range from £8.99, up to £29.99, so please ensure you refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be absolutely happy with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
The Real FN P90
The FN Herstal P90 was designed in the early 90s in response to a NATO requirement for a compact weapon system and a new cartridge intended to replace the 9x19mm, commonly used in handguns. The new weapon and cartridge was intended to exceed the performance of the 9mm round, in both armour penetration and accuracy at longer ranges. Despite the P90 and its 5.7x28mm cartridge being designed for behind the lines troops such as engineers and logistics troops, the PDW has mainly seen use with the SWAT teams of Police departments and Special Forces units around the world, ironically as a weapon for Direct action missions carried out by the most elite troops. It was also adopted by the US Secret Service as a counter-assault weapon due to its compact size, high rate of fire, and 50 round magazine making it the ideal weapon for repelling an attack from a would-be assassin. The P90 is absolutely packed with features only just finding their way into more conventional firearms designs today, such as fully ambidextrous controls, downward ejection of spent cases, and majority polymer construction; essential for keeping the weapon light and true to its role as a PDW. The fact that this futuristic PDW was designed over 30 years ago is a testament to the foresight of the design team at FN. The P90 was finally trialled in 2002 and came out on top against H&Ks MP7, but due to the contest being so close and a lack of agreement on the superior platform and cartridge, NATO went ahead and adopted nothing, deciding instead to stick with handguns in 9x19mm.
The Krytac EMG FN P90
Starting at the front end, we can see an accurate P90 flash hider, correctly depicting the most modern version of this muzzle device. A great start for realism! The flash hider attaches to the outer barrel via 14mm CCW male threads, which will allow any of the most common types of threaded accessories to be added; including tracer units, suppressors, and sound amplifiers. I'm sure we have all seen a suppressed P90 - it is a match made in heaven!
The upper receiver assembly is constructed entirely from Aluminium, increasing strength whilst keeping the weight low to ensure the P90 remains manoeuvrable and aimable, as one would expect from a short bullpup design. On the left side of the upper receiver assembly, we can find beautifully engraved trademarks, licensed by FN Herstal themselves. The markings read: "P90 - cal 5.7x28", which match well with the other trademarks moulded into the high-density fibre-reinforced polymer lower receiver assembly. The upper receiver provides a single side Picatinny rail, which can be swapped to either side, depending on how you like to set up your P90. This rail is ideal for a tactical flashlight or laser unit coupled with a pressure switch.
The top rail is removable and includes built-in emergency backup sights, which can be viewed through the rail itself, whether you have an optic mounted or not. The upper also has two sets of additional backup sights which are machined as part of the assembly, and are intended for use when a P90 integral reflex sight is mounted, and appear on either side of the top rail. The charging handles can be found just below the upper assembly, and are mirrored on either side. Unlike most other P90s on the market, the charging handles on the Krytac P90 work to actuate the HOP door, which can be found within the thumbhole of the stock. This solves one of the major complaints about the original P90 AEG design; that the HOP was very hard to access. The HOP door can also be opened by hand and is helpfully enlarged to allow those of us with sausage fingers or those who wear gloves to adjust the HOP easily.
The lower body of the Krytac P90 is another feature which sets this P90 apart from the cheaper versions. The material used for this part is a high-density fibre reinforced polymer. This gives the Krytac P90 a smooth, textured surface, and an overall feeling of quality. The lower body shows no signs of flex, creaks or squeaking, and feels surprisingly strong given its low weight. Like the real P90, the lower body is a two-part clamshell design, held together with steel Allen bolts. There are more FN Herstal markings to be found here; within the designation window on the left side, we can see "Fabrique Nationale Herstal BELGIUM" in large text, with "Licensed by FN Herstal" discretely moulded below. As mentioned, the HOP of this P90 is similar to more conventional P90 designs, though it can now be accessed by pulling the charging handles to the rear, or by opening the HOP window manually, which can be found within the thumbhole grip. The HOP unit is of the standard P90 configuration but with an enhanced rotary dial, providing audible and tactile clicks which allow the HOP to be set more accurately and prevent the setting from being lost under the vibration of firing.
The P90 has a rather unconventional setup as far as the grip and handguard go, providing an integrated vertical grip with handstop for the support hand, and an angled thumbhole grip for the firing hand. This configuration keeps the shooter's hands close together, and may initially feel strange but provides some advantages which other more conventional designs lack. The grip being so close to the muzzle allows the P90 to be more accurately pointed; steering the barrel of this PDW is a lot closer to just pointing your fingers at the target, making the P90 easy to shoot accurately and minimizing the chances of oversteering and going past your target. The angled thumbhole grip, coupled with the top feeding arrangement allows the P90 user to get very very low when in the prone position, giving the user the advantage of cover where there normally is none! Being able to reload without rotating your primary when lying down can be an invaluable advantage, and one the enemy will not expect! The magazine release is perfectly positioned to facilitate this; it can be found at the top of the receiver, just in front of the shooter's face, and is easily accessible from either side.
The fire selector lever for the P90 can be found below the trigger and is a rotary design which is accessible from either side, adding to the P90's already exceptional ergonomics, and pairing well with its other ambidextrous features. The safe position, denoted by a white "S" provides a trigger lock, the "1" position, denoting semi-automatic provides a rapid single shot, and the fully-automatic position, denoted with an "A" provides a two-stage trigger; with a short press firing a single shot, and a long extended press firing fully automatic. Visually identifying these positions is aided through the coloured markings, with both the dangerous modes marked in red, and safe being marked in white. Krytac has also carried out some much-needed enhancement on the original P90 trigger design, which has the reputation of being long and mushy when compared with other triggers, the details of which we will discuss later. At the rear of the P90 we can find a rubber butt plate, which can be removed using the button at its base, providing access to the P90's battery compartment, and its internals. Also present is a sling slot in the lower body, providing an appropriate mounting solution for a P90 sling or the addition of a P90 QD sling adaptor.
One of the many features which mark this P90 out as the ultimate AEG P90 is its "stop firing on empty" feature. The Krytac P90 is compatible with standard Tokyo Marui style P90 magazines, but when using the enhanced Krytac Magazine the P90 can sense when its ammunition supply has been expended, cutting off the trigger to let you know its reload time. This can be extremely functional in-game, and will prevent those moments where you aren't sure if you are shooting BBs at the enemy or just harmless air. Functions such as this elevate the Krytac P90 above the average functional AEG to the level of the Systema PTW and Scorpion EVO, which are amongst the few advanced AEGs which include the "stop firing on empty" function. Krytac's enhanced P90 magazine also features a 50 round limiter, allowing you to select between a massive 200 round capacity or 50 rounds for a realistic scenario, or if you like a challenge!
Internally the Krytac P90 really outshines the rest. The Krytac gearbox which powers this beast boasts a famous Krytac in-line MOSFET, 8mm bearings, steel gears, and a quick change spring system; allowing you to tune the AEG to perfectly meet the limits of your Skirmish site with ease. The HOP system within the P90 sports a rotary adjuster, providing fine adjustments and holding its setting perfectly under the vibration of firing. Improvements Krytac has made to the standard P90 AEG design, dating all the way back to the first Tokyo Marui P90 include an updated trigger system, an enlarged HOP window which can also be revealed by pulling the charging handles, and the ability to adjust the motor height without removing the gearbox. The new trigger system features a light and quick to reset trigger, which has very little creep yet retains the original P90's dual-stage functionality; with a short press providing a single shot, and an extended press firing full auto. The trigger can also be adjusted, allowing the user to tune it for a very short press, or a long press if desired. On the boring end of things, the Krytac P90 features the standard staples of a truly modern AEG, an automotive fuse and a deans battery connector, reducing resistance over the legacy standard fuse/mini-Tamiya connector combination and ensuring you get the most out of this high-performance setup. To ensure that the Krytac P90 can handle stronger springs the Gearbox has had its cylinder window corners radiused to reduce the chances that fatigue on the shell will cause damage. The gears are of 18:1 ratio, providing efficient smooth running and a killer rate of fire.
If you have been eyeing up a P90, but none of the other offerings has met the mark, this may well be the one. The plethora of advanced features, exceptional build quality and jaw dropping performance of the Krytac P90 affirm its position as the king of Airsoft P90 platforms. If this one isn't good enough, we don't know what is!
Features
- Aluminium Upper receiver
- Reversible Side rail
- Rubber butt plate
- Fibre-reinforced Polymer lower
- Advanced design - Very ergonomic
- Krytac Enhanced Gearbox
- Krytac Enhanced Rotary HOP unit
- Adjustable dual-stage trigger
- Upper 20mm Picatinny rail for optical sights
- 3 different backup sight options
- Krytac ETU and MOSFET pre-installed
- Based on TM design, with major updates
- Compatible with TM Style P90 AEG magazines
- "Stop firing on empty" function when using Krytac Mags
- Includes Krytac Magazine with selectable capacity - 50 or 200 rnds
- Enlarged HOP window - accessible by hand or by using the charging handles
- Ambidextrous...everything - Ideal for both the Right or Wrong handed user!
- Realistic field stripping - A press of a button removes the entire upper assembly
Package Includes
- Krytac EMG FN Herstal P90 SMG AEG
- Krytac EMG P90 Medium Capacity 200/50 rnd Magazine
- Sight Post Adjuster
- Deans to Mini Tamiya Adapter
Specification
General
 |
Submachine Gun
|
|---|---|
 |
Yes
|
 |
Yes,
No,
|
 |
Approx. 335fps ± 10%, using 0.20g BB
|
 |
Yes
|
 |
Yes
|
 |
|
 |
Regular Player, Experienced Player,
|
Construction
 |
Aluminium Upper receiver, Fibre-reinforced Polymer Lower receiver.
|
|---|---|
|
|
Polymer
Alloy
Aluminium
Steel
Nylon Fiber
|
 |
Polymer
Alloy
Aluminium
Steel
|
Weapon Specific
 |
Electric
|
|---|---|
 |
None
|
 |
Long Gun, P90, PDW,
|
 |
Long Gun Magazine, P90,
|
 |
   Two Stage Trigger
|
 |
Trigger Lock
|
 |
Ambidextrous
|
 |
Bullpup
|
 |
1:1
|
 |
0.25g
|
Hop-Up
 |
Yes
|
|---|---|
 |
Rotary
|
 |
Within the thumbhole of the stock, accessible when door is opened manually or when charging handles are pulled to the rear
|
Furniture
 |
|
|---|---|
 |
20mm RIS / RAS , 20mm Railed Receiver,
|
 |
Fixed
|
 |
1 Position
|
 |
Iron Sights , Aperture Iron Sight,
|
 |
Stock , Loop ,
|
Barrel
|
Outer Barrel Length (in)
|
10.4''
|
|---|---|
 |
Male
|
 |
CCW (Counter Clockwise)
|
 |
14mm
|
 |
247mm
|
Magazine Specific
 |
AEG, Adjustable Capacity,
|
|---|---|
 |
Approx. 200 Rounds
|
 |
Speed Loader
|
 |
Bottom
|
Electric Gun Specific Information
Gearbox
|
|
V6 Gearbox
|
|---|---|
 |
Rear Wired
|
 |
Yes
|
 |
Yes
|
Motor
 |
High Torque
|
|---|
Battery Specific
 |
 |
|---|
Suggested Battery
 |
Li-Po
|
|---|---|
 |
Block
|
 |
7.4v
|
Product Testing Data
 |
335fps
|
|---|---|
|
|
0.2g ASG BLASTER
|
Size guide
Joule Charts
Special Instructions
These table can be used as a reference to see if the BB weight you are using will be over acceptable Joulage limits at some Airsoft Sites in the UK. To check if the weight can be used chrono your weapon using the BB you intend to use, and then compare it to the chart.
FPS, Power and Joule Limits can vary from site to site, so please get in touch with where you're going to play with in advance to avoid disappointment.
Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, with a 350fps limit for Automatic Replicas, 400fps for Semi-Automatic Replicas, and 500fps for Bolt Action Replicas.
Tap the tabs below to open the relevant chart for your replica.
This table should be used for reference, and cannot be used to check one weight against another, as the weight of the BB affects the power.
In order to check if the BB can be used with your replica chronograph using the weight you wish to use and then compare it against the table.
Every time you change weights you will need to re-chrono and check against the table. This is not a conversion chart between weights.
Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, and is the equivalent of 350fps, using 0.20g BB resulting in an upper limit of 1.14j.
| Velocity | BB Weight (Grams) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
| 250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
| 260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
| 270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
| 280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
| 290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
| 300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
| 310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
| 320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
| 325 | 0.98 | 1.23 | 1.37 | 1.47 | 1.57 | 1.77 | 1.96 | 2.11 | 2.21 | 2.45 |
| 328 | 1.00 | 1.25 | 1.40 | 1.50 | 1.60 | 1.80 | 2.00 | 2.15 | 2.25 | 2.50 |
| 330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
| 335 | 1.04 | 1.30 | 1.46 | 1.56 | 1.67 | 1.88 | 2.09 | 2.24 | 2.35 | 2.61 |
| 340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
| 345 | 1.11 | 1.38 | 1.55 | 1.66 | 1.77 | 1.99 | 2.21 | 2.38 | 2.49 | 2.76 |
| 350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
| 355 | 1.17 | 1.46 | 1.64 | 1.76 | 1.87 | 2.11 | 2.34 | 2.52 | 2.63 | 2.93 |
| 360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 400fps, using 0.20g BB resulting in an upper limit of 1.49j.
| Velocity | BB Weight (Grams) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
| 250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
| 260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
| 270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
| 280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
| 290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
| 300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
| 310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
| 320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
| 330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
| 340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
| 350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
| 360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
| 370 | 1.27 | 1.59 | 1.78 | 1.91 | 2.03 | 2.29 | 2.54 | 2.73 | 2.86 | 3.18 |
| 380 | 1.34 | 1.68 | 1.88 | 2.01 | 2.15 | 2.41 | 2.68 | 2.88 | 3.02 | 3.35 |
| 390 | 1.41 | 1.77 | 1.98 | 2.12 | 2.26 | 2.54 | 2.83 | 3.04 | 3.18 | 3.53 |
| 400 | 1.49 | 1.86 | 2.08 | 2.23 | 2.38 | 2.68 | 2.97 | 3.20 | 3.34 | 3.72 |
| 410 | 1.56 | 1.95 | 2.19 | 2.34 | 2.50 | 2.81 | 3.12 | 3.36 | 3.51 | 3.90 |
Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 500fps, using 0.20g BB resulting in an upper limit of 2.32j.
| Velocity | BB Weight (Grams) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
| 250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
| 260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
| 270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
| 280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
| 290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
| 300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
| 310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
| 320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
| 330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
| 340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
| 350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
| 360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
| 370 | 1.27 | 1.59 | 1.78 | 1.91 | 2.03 | 2.29 | 2.54 | 2.73 | 2.86 | 3.18 |
| 380 | 1.34 | 1.68 | 1.88 | 2.01 | 2.15 | 2.41 | 2.68 | 2.88 | 3.02 | 3.35 |
| 390 | 1.41 | 1.77 | 1.98 | 2.12 | 2.26 | 2.54 | 2.83 | 3.04 | 3.18 | 3.53 |
| 400 | 1.49 | 1.86 | 2.08 | 2.23 | 2.38 | 2.68 | 2.97 | 3.20 | 3.34 | 3.72 |
| 410 | 1.56 | 1.95 | 2.19 | 2.34 | 2.50 | 2.81 | 3.12 | 3.36 | 3.51 | 3.90 |
| 420 | 1.64 | 2.05 | 2.29 | 2.46 | 2.62 | 2.95 | 3.28 | 3.52 | 3.69 | 4.10 |
| 430 | 1.72 | 2.15 | 2.40 | 2.58 | 2.75 | 3.09 | 3.44 | 3.69 | 3.86 | 4.29 |
| 440 | 1.80 | 2.25 | 2.52 | 2.70 | 2.88 | 3.24 | 3.60 | 3.87 | 4.05 | 4.50 |
| 450 | 1.88 | 2.35 | 2.63 | 2.82 | 3.01 | 3.39 | 3.76 | 4.04 | 4.23 | 4.70 |
| 460 | 1.97 | 2.46 | 2.75 | 2.95 | 3.15 | 3.54 | 3.93 | 4.23 | 4.42 | 4.91 |
| 470 | 2.05 | 2.57 | 2.87 | 3.08 | 3.28 | 3.69 | 4.10 | 4.41 | 4.62 | 5.13 |
| 480 | 2.14 | 2.68 | 3.00 | 3.21 | 3.42 | 3.85 | 4.28 | 4.60 | 4.82 | 5.35 |
| 490 | 2.23 | 2.79 | 3.12 | 3.35 | 3.57 | 4.02 | 4.46 | 4.80 | 5.02 | 5.58 |
| 500 | 2.32 | 2.90 | 3.25 | 3.48 | 3.72 | 4.18 | 4.65 | 4.99 | 5.23 | 5.81 |
| 510 | 2.42 | 3.02 | 3.38 | 3.62 | 3.87 | 4.35 | 4.83 | 5.20 | 5.44 | 6.04 |
Need ideas for something extra?
- Bottles or Bags
- 0.25g Standard BBs
- ±0.01mm Tolerance
Produced by VORSK Airsoft, these Airsoft BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.
These particular BBs are standard 0.25g BBs which are designed to work in any Airsoft gun, performing best in Airsoft guns which fire between 280fps - 370fps, and are the go-to weight for any Airsoft skirmisher looking for an the perfect all around weight for a standard AEG. Whether you're new to Airsoft, or a regular skirmisher, this weight of BB will most likely be your go-to BB weight, and is the most commonly used by Airsoft players.
- Approx. 3570 BBs
- Multi-Polish Process
- 1KG Bag of 0.28G BB
Match Grade BBs created for Airsoft guns and weapons, created with a multi-polish process to give an excellent finish. The BBs are constructed from PLA (Polylactide) material, and feature a 0.01mm +/- tolerance for improved consistency.
- Play For Longer
- For Omega CO2
- Holds 2 x 12g CO2
This is a spare or replacement CO2 Cradle for the Tippmann Omega PV Series with a CO2 Stock. It holds two 12g CO2 Sparklets which lasts for hundreds of shots, but will need refilling with CO2 once empty. Having a spare allows you to quickly change out the cartridge rather than opening it up and replacing the CO2 Bulbs. This is a direct replacement, that is exactly the same as the one supplied in the original box. If you want to stay in the field playing for longer, rather than sacrificing your sweet position and returning to the safe zone, then this is a must-have purchase.
- 300g Contents
- Metal Fill Nozzle
- Dust Cover Included
A high performance gas, designed to operate at lower temperatures (between 3c - 20c) allowing to use your weapon all year round. Using this high power mix gives an increase in FPS, GBB efficiency and a harder kick.
- 300g Contents
- Metal Fill Nozzle
- Dust Cover Included
Designed to make your gas Airsoft RIF more consistent between every shot and work far better in colder conditions. You will also achieve an increase in FPS but you must let the gas settle in your magazine first!
- Weaker Than Ultra Gas
- Ideal Summer Gas
- 700ml Content
A very popular selling gas especially during summer and in countries that have a warm climate. This gas really is a low power gas. It has a high silicone content, so you will need to clean your GBB Airsoft weapon more frequently to ensure longevity.
Stocked and used by our Patrol Base workshop and other staff members for years, each can has 700ml of contents and can be used to reduce output power of a hot gas gun, or ensure smooth silky operation of a Polymer slided pistol.
- Polymer construction
- 1200rnd Capacity
- Autowinding drum magazine for M4/AR15 AEG
Looking for some extra firepower to keep the enemies' heads down as you advance? The NUPROL 1200rnd Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high density polymer with a modern design aesthetic, making it perfect for practically any M4/AR15 Airsoft AEG, especially those leaning into a more aggressive look, or those looking to sample the support weapon playstyle. This magazine is an autowinding design which requires 3x AAA batteries to operate.
- 3-9 x 40E Zoom
- High Mounts Included
- Illuminated Cross Optic
An upgraded optic over the traditional standard 3-9x40 alternative. The E version comes with illumination settings with adjustable Red levels of brightness. Also included is a 5cm long sun shade that comes pre fitted within the box.
- Bottles or Bags
- 0.20g Standard BBs
- ±0.01mm Tolerance
Produced by VORSK Airsoft, these Airsoft BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.
These particular BBs are standard 0.20g BBs which are designed to work in any Airsoft gun, but perform at their best in beginner and low power Airsoft replicas under 350fps. Whether you're new to Airsoft, playing indoors, or looking for BBs for your Spring Powered Airsoft replica then these are the BBs for you.
- 22,000 Shot Life
- 35 BBs Per Second
- GemTech Licensed
An AceTech Tracer Unit, which is concealed inside a fully licensed and CNC Machined Aluminium constructed replica of a GM-9 Suppressor from GemTech, a manufacturer of Suppressor for Real World Firearms. The internal LiPo battery can last for up to 22,000 shots, and can keep up with up to 35 BBs per second for maximum performance.
- Green Gas
- 520ml Contents
- 90% Propane / 10% Butane
Green Gas designed for use on gas powered Airsoft pistols, Rifles and Shotguns. The gas comes in a lightweight aluminium can and has a heavy duty metal nozzle meaning it won't snap.
- Special Putty
- Oils & Degreasers
- Cleaning Tools Included
A must have piece of kit for any Airsoft player or enthusiast. The kit comes with everything you need to keep your GBB and AEG weapons in top condition, giving you an edge over your opponents.
- 3MOA Target Dot
- Special VE Warranty
- Super Clear Sight Picture
An ULTRA compact, Full Metal 20mm / Pistol Weaver red dot sight designed for use on pistols / short dots & LPVO's as an RMR or as a back up sight. It has a 3MOA target dot and auto adjusting brightness levels according to your environment lighting.
This product is covered by the Vector Optics Lifetime warranty, for more information please read below.
- Approx. 3330 BBs
- Multi-Polish Process
- 1KG Bag of 0.30G BB
Match Grade BBs created for Airsoft Guns and Weapons, created with a Multi-Polish Process to give an excellent finish. The BBs are constructed from PLA (Polylactide) Material, and feature a 0.01mm +/- Tolerance for improved consistency.
- 0.25g BIO BBs
- Bottles or Bags
- ±0.01mm Tolerance
Produced by VORSK Airsoft, these Airsoft BIO BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.
These particular BBs are BIO 0.25g BBs which are created from biodegradable materials so that they will gradually break down with time when exposed to natural environments. Touted as a more environmentally friendly BB, they are sometimes required by certain Airsoft sites to play.
This weight of BB are designed to work in any Airsoft gun, but perform at their best in beginner and low power Airsoft replicas under 350fps. Whether you're new to Airsoft, playing indoors, or looking for BBs for your Spring Powered Airsoft replica then these are the BBs for you.
- 1KG Resealable Bag
- 5.95mm +/- 0.01mm
- Competition Grade BB
These 0.28g BB's created by G&G (Guay Guay), who create a range of high quality BB guns and related products, with these BBs being some of the highest quality in the sport.
- 0.20g BIO BBs
- Bottles or Bags
- ±0.01mm Tolerance
Produced by VORSK Airsoft, these Airsoft BIO BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.
These particular BBs are BIO 0.20g BBs which are created from biodegradable materials so that they will gradually break down with time when exposed to natural environments. Touted as a more environmentally friendly BB, they are sometimes required by certain Airsoft sites to play.
This weight of BB are designed to work in any Airsoft gun, but perform at their best in beginner and low power Airsoft replicas under 350fps. Whether you're new to Airsoft, playing indoors, or looking for BBs for your Spring Powered Airsoft replica then these are the BBs for you.
- 30ml Content
- Great Lubricant
- Easy Drip Nozzle
Stocked and used by our Patrol Base workshop and other staff members for years. Easy to store and use with the lockable pop on lid you can store this in a rucksack or bag without over worrying the contents may spill out during transit or storage.
Like this Airsoft Gun? Check out these awesome Products!
- £20 Gift Voucher
- Usable In-Store
- Usable Online
As the time approaches for birthday, Christmas and special occasion gifts, it can be a bit nerve wracking trying to decide what Airsoft Gift to buy. Airsoft players are a unique lot; what one person likes another may hate, and there's nothing worse than purchasing a gift to find out the person doesn't like it! We've created a Gift Card for this very situation, which can be purchased and redeemed against buying kit from our website! Let the Airsoft player in your life choose the present they want the most, or contribute towards that gun they've always wanted!
For Terms and Conditions please see: Terms and Conditions Page.
- £10 Gift Voucher
- Usable In-Store
- Usable Online
As the time approaches for birthday, Christmas and special occasion gifts, it can be a bit nerve wracking trying to decide what Airsoft Gift to buy. Airsoft players are a unique lot; what one person likes another may hate, and there's nothing worse than purchasing a gift to find out the person doesn't like it! We've created a Gift Card for this very situation, which can be purchased and redeemed against buying kit from our website! Let the Airsoft player in your life choose the present they want the most, or contribute towards that gun they've always wanted!
For Terms and Conditions please see: Terms and Conditions Page.
- Full metal construction
- Matt black with gold outer barrel
- Combat styled Hi-capa long boi
If your friends are using the R604, this pistol is the key to making them feel inadequate! Introducing the R608 Hi-capa Combat XL from Army Armament, a Hi-capa based pistol with a combat leaning, now in a new, lengthened flavour! The pistol combines the well liked aggressively stippled grips of the R604 and JW3 GBB pistols with a shorter dust cover and 5.5-inch outer barrel with extended slide; akin to the original "Silverballer" of the well-known man of hits video game but in a slightly more practical length!
- Full metal construction
- Functional De-cocking lever
- 20mm frame rail and 12mm female threaded barrel
If you are eyeing up a new sidearm but aren't up for the more common Hi-capa and EU series perhaps a classic Italian designed pistol would suit your tastes? Introducing the Raven R9 GBB, Raven's entry into the B9 series of Airsoft pistols. The real B9 was most famously issued to the US Army in the 1980s, replacing the venerable M1911.
- 1:1 Scale Replica
- Supreme build quality
- Beautiful licensed H&K trademarks
If you are after a DMR to match your UKSF loadout, you have found it. The Umarex HK417D AEG is a seriously well built and faithful replica of the HK417, chosen marksman's rifle for special forces all around the world. Put this down next to a real HK417 and you will be hard-pressed to pick out the right one for your Milsim skirmish!
- Textured Grip
- CO2 Compatible
- Square Ironsight
A Gas Blowback Airsoft Pistol built by WE Europe as part of their EU-Series Pistol Range, and is a more compact version of the standard sized EU-Series pistol.
- Low Light Ironsights
- Threaded Outer Barrel
- Integrated Red Dot Sight
From one of the hottest new brands on the scene, VORSK, comes a 4.3 Hi-Capa which offers a realistic Gas Blowback action as well as an Integrated Red Dot Sight, Threaded Outer Barrel, Low Light Ironsights and much more. This is the perfect sidearm for those who love the Hi-Capa platform but want a more compact backup.
- Textured Grip
- Decocking Lever
- Gas Blowback Pistol
A Gas Blowback 6mm BB Airsoft Pistol, based on the Sig Sauer P229 service pistol, used by U.S. Government Forces and more.
- 14mm CCW Thread
- Licensed Rail System
- MK18 Platform Replica
This Airsoft Electric Gun is based on the MK18 Platform, and is essentially a Specna Arms CORE Series Replica with a fully licensed Daniel Defense 20mm MK18 Rail System. The MK18 is highly regarded for its' awesome looks, and this is no exception. This is an ideal Starter Gun, or a step-up in quality for someone looking for their next Primary.
- TM AWS Compatible
- AirsoftPro Compatible
- Integrated Carry Handle
Russian rifle lovers rejoice! This replica of the lesser-seen SV-98 platform is a Bolt Action Spring Powered Sniper Rifle which is constructed to be compatible with TM AWS parts, as well as AirsoftPro parts. If you're looking for a Sniper Rifle which is highly upgradeable and different from the norm, you just found it.
- Quick Change Spring
- Electric Blowback AEG
- Unique KeyMod Handguard
Built by Specna Arms as part of their G11 series of AR36 clone rifles, but this one has a difference. Not only does it have a non-standard KeyMod handguard, but also features an internal electronic blowback system which gives the weapon a slight recoil for enhanced realism.
- MOSFET System
- POLYMER Version
- KeyMod Rail System
An Airsoft 6mm BB Gun, based on the M4, this is the latest version of the G&G Combat Machine. The weapon is constructed almost entirely from polymer including the Receiver, Stock, Pistol Grip with parts like the Magazine and Stock Tube being alloy.
- M-LOK Compatible
- Dynamic AK Platform
- Multiple Stock Variants
A 6mm BB Airsoft Electric Gun, based on the AK-102, and given a comprehensive overhaul, creating an Operator Platform that is incredibly dynamic.
- Compact CQB Weapon
- Rails for Sights and Accessories
- High Capacity M4 Magazine Adaptor
An Airsoft 6mm Airsoft AEG replica designed to look like the FN P90, produced by FN Herstal in Belgium, supplied with an adaptor to allow the use of m4 magazines including the provided STANAG highcap.
- Folding Stock
- Folding Foregrip
- Railed Hand Guard
An Electric Airsoft rifle based on the world famous and seemingly timeless AK47, now updated with a more practical, and tactical configuration! Complete with a side folding stock, folding vertical foregrip and handguards sporting 20mm Picatinny rails, the CM.028U is perfect for PMC impressionists, and those who want something with rails which isn't an M4!
- Full Auto Version
- Gas Blowback Pistol
- Racoon City Police Ver
Yes it shoots full auto and yes it can be yours! This is the lavish and exuberant variant of the ever popular Biohazard series of Airsoft Pistols, featuring 'Racoon City Police' trademarks.
- S3 MOSFET
- Microswitch Trigger
- Electronic Blowback
An absolutely solid series of AR platform AEGs which offer Electronic Blowback, tactical furniture, CNC machined externals, Split Gearbox design, Electronic Trigger, S3 MOSFET, Programmable Burst and much more.
- Thread Adaptor
- Extended Base Plate
- Light Enhancing Sights
A replica gas blowback Airsoft pistol designed by Army Armaments with a range of advanced features, such as an extended magazine and light enhancing ironsights, and is based on the 1911 platform with a more modern twist.