Novritsch Tactical Gear

If you run HPA and you need a convenient and modern way to affix your air tank to your rig, this is what you need! The Novritsch MOLLE HPA Tank Pouch is sized to fit 0.8L and 1L air tanks (90mm maximum diameter) and can be tightened down for a perfect fit via the 3 external straps and bungee cord at the top and bottom.

As it comes, the MOLLE HPA Tank Pouch mounts vertically but it can also be mounted horizontally using MALICE clips or Novritsch's own MOLLE strip clips. Available in a wide variety of spicy colour options, this air tank pouch can be a great way to add a stylish touch to your loadout with a practical and functional design as a bonus!

If you're treating yourself to the super speedy Novritsch Modular Chest Rig 1.0, you'll need some of these! The Novritsch Modular Chest Rig Inserts are available in 3 different flavours, suitable for all of the most common Airsoft magazines out there. 

The M4/AR variant holds 3 M4/AR-15 magazines, the SMG variant holds 5 SMG or pistol magazines and the DMR version holds 3 7.62 DMR magazines but can also take AK and AR36 magazines. Installing the inserts is as simple as placing them inside with the open end facing upwards and affixing the velcro on the inserts to the velcro inside the Modular Chest Rig 1.0. A side effect of this is that the inserts can be quickly swapped in seconds, meaning if you're bored playing with your DMR you can switch it out for an SMG and swap mag inserts without even taking the rig off!

The Modular Chest Rig Insert is supplied as a single insert, so if you need to fill both compartments in the Modular Chest Rig 1.0 chassis make sure you order 2! 

If you're treating yourself to the super speedy Novritsch Modular Chest Rig 1.0, you'll need some of these! The Novritsch Modular Chest Rig Inserts are available in 3 different flavours, suitable for all of the most common Airsoft magazines out there. 

The M4/AR variant holds 3 M4/AR-15 magazines, the SMG variant holds 5 SMG or pistol magazines and the DMR version holds 3 7.62 DMR magazines but can also take AK and AR36 magazines. Installing the inserts is as simple as placing them inside with the open end facing upwards and affixing the velcro on the inserts to the velcro inside the Modular Chest Rig 1.0. A side effect of this is that the inserts can be quickly swapped in seconds, meaning if you're bored playing with your DMR you can switch it out for an SMG and swap mag inserts without even taking the rig off!

The Modular Chest Rig Insert is supplied as a single insert, so if you need to fill both compartments in the Modular Chest Rig 1.0 chassis make sure you order 2! 

If you are running a platform with large and awkward mags, Novritsch has the carrying solution you need! The Novritsch MOLLE DMR/7.62/AR36 Magazine Pouch is designed to fit 7.62 style DMR magazines but also fits AK, AR36, HK417, AR-10/SR25 and G3 mags nicely.

The pouch consists of a fabric outer coating in a camouflage pattern of your choice with a polymer inner retainer which helps keep the mag pouch open for easy reloads and even easier reinsertion. The pouch attaches to MOLLE webbing loops and also has laser-cut MOLLE loops on the front so you can stack them if you need extra carrying capacity. Whether you run a MOLLE vest or you are rocking the awesome Novritsch ASPC plate carrier, these pouches give you the capacity and the aesthetics!

If you are running a platform with large and awkward mags, Novritsch has the carrying solution you need! The Novritsch MOLLE DMR/7.62/AR36 Magazine Pouch is designed to fit 7.62 style DMR magazines but also fits AK, AR36, HK417, AR-10/SR25 and G3 mags nicely.

The pouch consists of a fabric outer coating in a camouflage pattern of your choice with a polymer inner retainer which helps keep the mag pouch open for easy reloads and even easier reinsertion. The pouch attaches to MOLLE webbing loops and also has laser-cut MOLLE loops on the front so you can stack them if you need extra carrying capacity. Whether you run a MOLLE vest or you are rocking the awesome Novritsch ASPC plate carrier, these pouches give you the capacity and the aesthetics!

If you are running a platform with large and awkward mags, Novritsch has the carrying solution you need! The Novritsch MOLLE DMR/7.62/AR36 Magazine Pouch is designed to fit 7.62 style DMR magazines but also fits AK, AR36, HK417, AR-10/SR25 and G3 mags nicely.

The pouch consists of a fabric outer coating in a camouflage pattern of your choice with a polymer inner retainer which helps keep the mag pouch open for easy reloads and even easier reinsertion. The pouch attaches to MOLLE webbing loops and also has laser-cut MOLLE loops on the front so you can stack them if you need extra carrying capacity. Whether you run a MOLLE vest or you are rocking the awesome Novritsch ASPC plate carrier, these pouches give you the capacity and the aesthetics!

If you are running a platform with large and awkward mags, Novritsch has the carrying solution you need! The Novritsch MOLLE DMR/7.62/AR36 Magazine Pouch is designed to fit 7.62 style DMR magazines but also fits AK, AR36, HK417, AR-10/SR25 and G3 mags nicely.

The pouch consists of a fabric outer coating in a camouflage pattern of your choice with a polymer inner retainer which helps keep the mag pouch open for easy reloads and even easier reinsertion. The pouch attaches to MOLLE webbing loops and also has laser-cut MOLLE loops on the front so you can stack them if you need extra carrying capacity. Whether you run a MOLLE vest or you are rocking the awesome Novritsch ASPC plate carrier, these pouches give you the capacity and the aesthetics!

If you are running a platform with large and awkward mags, Novritsch has the carrying solution you need! The Novritsch MOLLE DMR/7.62/AR36 Magazine Pouch is designed to fit 7.62 style DMR magazines but also fits AK, AR36, HK417, AR-10/SR25 and G3 mags nicely.

The pouch consists of a fabric outer coating in a camouflage pattern of your choice with a polymer inner retainer which helps keep the mag pouch open for easy reloads and even easier reinsertion. The pouch attaches to MOLLE webbing loops and also has laser-cut MOLLE loops on the front so you can stack them if you need extra carrying capacity. Whether you run a MOLLE vest or you are rocking the awesome Novritsch ASPC plate carrier, these pouches give you the capacity and the aesthetics!

If you are running a platform with large and awkward mags, Novritsch has the carrying solution you need! The Novritsch MOLLE DMR/7.62/AR36 Magazine Pouch is designed to fit 7.62 style DMR magazines but also fits AK, AR36, HK417, AR-10/SR25 and G3 mags nicely.

The pouch consists of a fabric outer coating in a camouflage pattern of your choice with a polymer inner retainer which helps keep the mag pouch open for easy reloads and even easier reinsertion. The pouch attaches to MOLLE webbing loops and also has laser-cut MOLLE loops on the front so you can stack them if you need extra carrying capacity. Whether you run a MOLLE vest or you are rocking the awesome Novritsch ASPC plate carrier, these pouches give you the capacity and the aesthetics!

If you're the type of sniper that crawls, moves fast and is happy to get dirty to get the job done, the Novritsch Full Seal MOLLE SSG10/VSR-10 Mag Pouch is the only way to store your VSR/SSG10 mags. This magazine pouch is constructed from 1000D nylon, offering high wear and water resistance thanks to its high stitch density.

The top of the Full Seal Pouch closes via a top flap and fabric loop, similar to PLCE webbing pouches, meaning you can get positively filthy in-game without your mag getting fouled and affecting your accuracy. Capable of being mounted to any MOLLE webbing-equipped surface on a belt, backpack, tactical vest or plate carrier, the Full Seal MOLLE SSG10/VSR-10 Mag Pouch will keep your mag retained and BBs clean so you can perform at your best!

If you're the type of sniper that crawls, moves fast and is happy to get dirty to get the job done, the Novritsch Full Seal MOLLE SSG10/VSR-10 Mag Pouch is the only way to store your VSR/SSG10 mags. This magazine pouch is constructed from 1000D nylon, offering high wear and water resistance thanks to its high stitch density.

The top of the Full Seal Pouch closes via a top flap and fabric loop, similar to PLCE webbing pouches, meaning you can get positively filthy in-game without your mag getting fouled and affecting your accuracy. Capable of being mounted to any MOLLE webbing-equipped surface on a belt, backpack, tactical vest or plate carrier, the Full Seal MOLLE SSG10/VSR-10 Mag Pouch will keep your mag retained and BBs clean so you can perform at your best!

If you're the type of sniper that crawls, moves fast and is happy to get dirty to get the job done, the Novritsch Full Seal MOLLE SSG10/VSR-10 Mag Pouch is the only way to store your VSR/SSG10 mags. This magazine pouch is constructed from 1000D nylon, offering high wear and water resistance thanks to its high stitch density.

The top of the Full Seal Pouch closes via a top flap and fabric loop, similar to PLCE webbing pouches, meaning you can get positively filthy in-game without your mag getting fouled and affecting your accuracy. Capable of being mounted to any MOLLE webbing-equipped surface on a belt, backpack, tactical vest or plate carrier, the Full Seal MOLLE SSG10/VSR-10 Mag Pouch will keep your mag retained and BBs clean so you can perform at your best!

If you're the type of sniper that crawls, moves fast and is happy to get dirty to get the job done, the Novritsch Full Seal MOLLE SSG10/VSR-10 Mag Pouch is the only way to store your VSR/SSG10 mags. This magazine pouch is constructed from 1000D nylon, offering high wear and water resistance thanks to its high stitch density.

The top of the Full Seal Pouch closes via a top flap and fabric loop, similar to PLCE webbing pouches, meaning you can get positively filthy in-game without your mag getting fouled and affecting your accuracy. Capable of being mounted to any MOLLE webbing-equipped surface on a belt, backpack, tactical vest or plate carrier, the Full Seal MOLLE SSG10/VSR-10 Mag Pouch will keep your mag retained and BBs clean so you can perform at your best!

If you're the type of sniper that crawls, moves fast and is happy to get dirty to get the job done, the Novritsch Full Seal MOLLE SSG10/VSR-10 Mag Pouch is the only way to store your VSR/SSG10 mags. This magazine pouch is constructed from 1000D nylon, offering high wear and water resistance thanks to its high stitch density.

The top of the Full Seal Pouch closes via a top flap and fabric loop, similar to PLCE webbing pouches, meaning you can get positively filthy in-game without your mag getting fouled and affecting your accuracy. Capable of being mounted to any MOLLE webbing-equipped surface on a belt, backpack, tactical vest or plate carrier, the Full Seal MOLLE SSG10/VSR-10 Mag Pouch will keep your mag retained and BBs clean so you can perform at your best!

If you're the type of sniper that crawls, moves fast and is happy to get dirty to get the job done, the Novritsch Full Seal MOLLE SSG10/VSR-10 Mag Pouch is the only way to store your VSR/SSG10 mags. This magazine pouch is constructed from 1000D nylon, offering high wear and water resistance thanks to its high stitch density.

The top of the Full Seal Pouch closes via a top flap and fabric loop, similar to PLCE webbing pouches, meaning you can get positively filthy in-game without your mag getting fouled and affecting your accuracy. Capable of being mounted to any MOLLE webbing-equipped surface on a belt, backpack, tactical vest or plate carrier, the Full Seal MOLLE SSG10/VSR-10 Mag Pouch will keep your mag retained and BBs clean so you can perform at your best!

If you're the type of sniper that crawls, moves fast and is happy to get dirty to get the job done, the Novritsch Full Seal MOLLE SSG10/VSR-10 Mag Pouch is the only way to store your VSR/SSG10 mags. This magazine pouch is constructed from 1000D nylon, offering high wear and water resistance thanks to its high stitch density.

The top of the Full Seal Pouch closes via a top flap and fabric loop, similar to PLCE webbing pouches, meaning you can get positively filthy in-game without your mag getting fouled and affecting your accuracy. Capable of being mounted to any MOLLE webbing-equipped surface on a belt, backpack, tactical vest or plate carrier, the Full Seal MOLLE SSG10/VSR-10 Mag Pouch will keep your mag retained and BBs clean so you can perform at your best!

If you're the type of sniper that crawls, moves fast and is happy to get dirty to get the job done, the Novritsch Full Seal MOLLE SSG10/VSR-10 Mag Pouch is the only way to store your VSR/SSG10 mags. This magazine pouch is constructed from 1000D nylon, offering high wear and water resistance thanks to its high stitch density.

The top of the Full Seal Pouch closes via a top flap and fabric loop, similar to PLCE webbing pouches, meaning you can get positively filthy in-game without your mag getting fouled and affecting your accuracy. Capable of being mounted to any MOLLE webbing-equipped surface on a belt, backpack, tactical vest or plate carrier, the Full Seal MOLLE SSG10/VSR-10 Mag Pouch will keep your mag retained and BBs clean so you can perform at your best!

If you need a compact pouch to store your radio, Novritsch has your back with the MOLLE Small Radio Pouch! This pouch mounts to MOLLE webbing, meaning it can be worn on a MOLLE belt, plate carrier or backpack and is constructed from 1000D Nylon fabric. This pouch is styled to match the Novritsch ASPC Plate carrier but would also look fantastic on the Minimal Chest Rig.

Your radio is retained by a top flap with an elastic bungee cord, keeping your comms safe and sound while providing access to the on/off dial and allowing the antenna to protrude. Fitment-wise, this pouch is designed for the Novritsch Tactical Radio V3 but should also fit most compact handheld radios like the Baofeng UV5-R. Big boy radios like AN/PRC-152 definitely won't fit, if you need a pouch for bigger radios, this would be our pick.

If you want to stay on comms with your team while adding minimal bulk and weight to your loadout, the Novritsch MOLLE Small Radio Pouch will be an asset to your kit list!

If you are looking for mag pouches with a gorgeous modern aesthetic, Novritsch has you covered! The MOLLE Open SMG Magazine Pouch is constructed with a fabric outer and a polymer inner retainer, meaning reinserting your mags has never been easier, nor has fast reloads! This pouch is size adjustable, and from our tests, we were able to conclude that SMG5, SMG7, UTR45, Scorpion EVO, ARP9/AR-9, PP-19, G& G MXC9/PCC45, UMP, MP5 and MP7 magazines all fit in nicely when adjusted.

The MOLLE Open SMG Magazine Pouch mounts to MOLLE webbing and also has MOLLE webbing on the front, meaning you can stack these pouches on top of each other if you need extra load-bearing capacity. Size adjustments are applied via the polymer toggle on the rear of the pouch, allowing you to fit the pouch perfectly to your specific SMG magazine and have the exact amount of retention you need to get the job done. Whether you run a MOLLE vest or you are rocking the awesome Novritsch ASPC plate carrier, these pouches will give your rig a modern look and have you performing at your peak!

If you are looking for mag pouches with a gorgeous modern aesthetic, Novritsch has you covered! The MOLLE Open SMG Magazine Pouch is constructed with a fabric outer and a polymer inner retainer, meaning reinserting your mags has never been easier, nor has fast reloads! This pouch is size adjustable, and from our tests, we were able to conclude that SMG5, SMG7, UTR45, Scorpion EVO, ARP9/AR-9, PP-19, G& G MXC9/PCC45, UMP, MP5 and MP7 magazines all fit in nicely when adjusted.

The MOLLE Open SMG Magazine Pouch mounts to MOLLE webbing and also has MOLLE webbing on the front, meaning you can stack these pouches on top of each other if you need extra load-bearing capacity. Size adjustments are applied via the polymer toggle on the rear of the pouch, allowing you to fit the pouch perfectly to your specific SMG magazine and have the exact amount of retention you need to get the job done. Whether you run a MOLLE vest or you are rocking the awesome Novritsch ASPC plate carrier, these pouches will give your rig a modern look and have you performing at your peak!

If you are looking for mag pouches with a gorgeous modern aesthetic, Novritsch has you covered! The MOLLE Open SMG Magazine Pouch is constructed with a fabric outer and a polymer inner retainer, meaning reinserting your mags has never been easier, nor has fast reloads! This pouch is size adjustable, and from our tests, we were able to conclude that SMG5, SMG7, UTR45, Scorpion EVO, ARP9/AR-9, PP-19, G& G MXC9/PCC45, UMP, MP5 and MP7 magazines all fit in nicely when adjusted.

The MOLLE Open SMG Magazine Pouch mounts to MOLLE webbing and also has MOLLE webbing on the front, meaning you can stack these pouches on top of each other if you need extra load-bearing capacity. Size adjustments are applied via the polymer toggle on the rear of the pouch, allowing you to fit the pouch perfectly to your specific SMG magazine and have the exact amount of retention you need to get the job done. Whether you run a MOLLE vest or you are rocking the awesome Novritsch ASPC plate carrier, these pouches will give your rig a modern look and have you performing at your peak!

If you are looking for mag pouches with a gorgeous modern aesthetic, Novritsch has you covered! The MOLLE Open SMG Magazine Pouch is constructed with a fabric outer and a polymer inner retainer, meaning reinserting your mags has never been easier, nor has fast reloads! This pouch is size adjustable, and from our tests, we were able to conclude that SMG5, SMG7, UTR45, Scorpion EVO, ARP9/AR-9, PP-19, G& G MXC9/PCC45, UMP, MP5 and MP7 magazines all fit in nicely when adjusted.

The MOLLE Open SMG Magazine Pouch mounts to MOLLE webbing and also has MOLLE webbing on the front, meaning you can stack these pouches on top of each other if you need extra load-bearing capacity. Size adjustments are applied via the polymer toggle on the rear of the pouch, allowing you to fit the pouch perfectly to your specific SMG magazine and have the exact amount of retention you need to get the job done. Whether you run a MOLLE vest or you are rocking the awesome Novritsch ASPC plate carrier, these pouches will give your rig a modern look and have you performing at your peak!

The Novritsch Universal Pouch 3.1 is perfect for holding all your small bits and pieces during your skirmishes. It is not too big, but certainly not too small and can accommodate a multitude of items such as your mobile phone, spare CO2 capsules, a speedloader, a multitool or maybe even a grenade or two! It is constructed from strong 1000D Nylon and sturdy metal zips so it can withstand a lot of wear and tear from your intense skirmishes. The lasercut molle on the outside is a wonderful touch too, it looks tactical and you can attach all sorts of additional things.

It comes in a variety of colours and camos so you can pick the one that best matches your skirmishing gear to complete your tactical regalia.

The Novritsch Universal Pouch 3.1 is perfect for holding all your small bits and pieces during your skirmishes. It is not too big, but certainly not too small and can accommodate a multitude of items such as your mobile phone, spare CO2 capsules, a speedloader, a multitool or maybe even a grenade or two! It is constructed from strong 1000D Nylon and sturdy metal zips so it can withstand a lot of wear and tear from your intense skirmishes. The lasercut molle on the outside is a wonderful touch too, it looks tactical and you can attach all sorts of additional things.

It comes in a variety of colours and camos so you can pick the one that best matches your skirmishing gear to complete your tactical regalia.

The Novritsch Universal Pouch 3.1 is perfect for holding all your small bits and pieces during your skirmishes. It is not too big, but certainly not too small and can accommodate a multitude of items such as your mobile phone, spare CO2 capsules, a speedloader, a multitool or maybe even a grenade or two! It is constructed from strong 1000D Nylon and sturdy metal zips so it can withstand a lot of wear and tear from your intense skirmishes. The lasercut molle on the outside is a wonderful touch too, it looks tactical and you can attach all sorts of additional things.

It comes in a variety of colours and camos so you can pick the one that best matches your skirmishing gear to complete your tactical regalia.

The Novritsch Universal Pouch 3.1 is perfect for holding all your small bits and pieces during your skirmishes. It is not too big, but certainly not too small and can accommodate a multitude of items such as your mobile phone, spare CO2 capsules, a speedloader, a multitool or maybe even a grenade or two! It is constructed from strong 1000D Nylon and sturdy metal zips so it can withstand a lot of wear and tear from your intense skirmishes. The lasercut molle on the outside is a wonderful touch too, it looks tactical and you can attach all sorts of additional things.

It comes in a variety of colours and camos so you can pick the one that best matches your skirmishing gear to complete your tactical regalia.

The Novritsch Universal Pouch 3.1 is perfect for holding all your small bits and pieces during your skirmishes. It is not too big, but certainly not too small and can accommodate a multitude of items such as your mobile phone, spare CO2 capsules, a speedloader, a multitool or maybe even a grenade or two! It is constructed from strong 1000D Nylon and sturdy metal zips so it can withstand a lot of wear and tear from your intense skirmishes. The lasercut molle on the outside is a wonderful touch too, it looks tactical and you can attach all sorts of additional things.

It comes in a variety of colours and camos so you can pick the one that best matches your skirmishing gear to complete your tactical regalia.

The Novritsch Universal Pouch 3.1 is perfect for holding all your small bits and pieces during your skirmishes. It is not too big, but certainly not too small and can accommodate a multitude of items such as your mobile phone, spare CO2 capsules, a speedloader, a multitool or maybe even a grenade or two! It is constructed from strong 1000D Nylon and sturdy metal zips so it can withstand a lot of wear and tear from your intense skirmishes. The lasercut molle on the outside is a wonderful touch too, it looks tactical and you can attach all sorts of additional things.

It comes in a variety of colours and camos so you can pick the one that best matches your skirmishing gear to complete your tactical regalia.

If you need SMG or pistol mag pouches with a slick modern look, the Novritsch MOLLE Elastic SMG/SSQ22 Magazine Pouch is what you need. Styled to match the Novrtisch ASPC plate carrier, this magazine pouch is designed for 9mm style SMG magazines, including the SSR9, G&G ARP9, VORSK VMP-1, SMG-5 and most extended pistol magazines. 

This pouch mounts to MOLLE webbing found on rigs, backpacks, belts and elsewhere. On the front of each pouch, we have additional laser-cut MOLLE loops to stack more pouches for a heavier loadout. Adjustable retention is provided by a toggle and bungee cord, allowing to you to loosen the draw for speed or tighten it down for security. 

If you need SMG or pistol mag pouches with a slick modern look, the Novritsch MOLLE Elastic SMG/SSQ22 Magazine Pouch is what you need. Styled to match the Novrtisch ASPC plate carrier, this magazine pouch is designed for 9mm style SMG magazines, including the SSR9, G&G ARP9, VORSK VMP-1, SMG-5 and most extended pistol magazines. 

This pouch mounts to MOLLE webbing found on rigs, backpacks, belts and elsewhere. On the front of each pouch, we have additional laser-cut MOLLE loops to stack more pouches for a heavier loadout. Adjustable retention is provided by a toggle and bungee cord, allowing to you to loosen the draw for speed or tighten it down for security.