NUPROL

A retention holster designed to fit snugly WE Europe EU Series Airsoft Pistols and can be attached to the users belt. The holster is designed to allow the user to quickly and effectively draw their pistol during combat at maximum speed, whilst still remaining safe. 

A retention holster designed to fit snugly WE Europe EU Series Airsoft Pistols and can be attached to the users belt. The holster is designed to allow the user to quickly and effectively draw their pistol during combat at maximum speed, whilst still remaining safe. 

A thin and lightweight battery, perfect for squeezing into even the tightest spots. The battery provides 1200mAh of power with a discharge rate of 20c and is so thin it can fit into stock tubes and AK/MP5 AEG Battery compartments.

If you are looking for tracer BBs in heavier weights to maximise your effective range, NUPROL have what you need! The RZR 0.25g Precision Tracer BB has the same ultra-tight +/- 0.01mm tolerances as NUPROL's standard BBs but are tracer BBs which will glow when fired through an Airsoft tracer unit, helping you instinct aim in close quarters and guide your BBs onto target in low light settings.

These BBs are available in both red and green, but if you want red tracers make sure you check your tracer unit can light up red tracer BBs as not every unit can.

If you are looking for tracer BBs in heavier weights to maximise your effective range, NUPROL have what you need! The RZR 0.25g Precision Tracer BB has the same ultra-tight +/- 0.01mm tolerances as NUPROL's standard BBs but are tracer BBs which will glow when fired through an Airsoft tracer unit, helping you instinct aim in close quarters and guide your BBs onto target in low light settings.

These BBs are available in both red and green, but if you want red tracers make sure you check your tracer unit can light up red tracer BBs as not every unit can.

The largest hard case produced by NUPROL, allowing you to store some serious fire power including sniper rifles! A must for those who want to truly care for their pride and joy.

Having more magazines in your loadout means more opportunities to get kills! The NUPROL W-Mag is the latest in NUPROL's line of AEG mid-capacity magazines, sporting a high-density polymer shell, a steel feed spring and a rubber baseplate which both protects the internals of the magazine in the event that it is dropped, and allows the magazine to be used as an improvised shooting support using a technique known as "mag-podding".  This magazine is a spring-loaded design and can be filled using a standard Airsoft speed loader through the fill/feed port at the top of the magazine.

If you are looking for heavy-weight biodegradable BBs, NUPROL's RZR BBs would be a great choice! RZRs have a superb reputation for precision and tight tolerances and this version is made from a biodegradable material which means you can shoot as much as you want without worrying about cleanup afterwards. 

An Airsoft replica helmet that's lightweight, features solid construction with enough Velcro to complete cover your head in your favourite patches and glow gel strips. 

An Airsoft replica helmet that's lightweight, features solid construction with enough Velcro to complete cover your head in your favourite patches and glow gel strips. 

Produced by NUPROL, these Airsoft Tracer BIO BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the new RZR range of Airsoft BBs ranging from lightweight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.

These particular are that of Tracer BBs in your choice of either red or green. These BBs, when shot are infused light to allow them to glow in the dark.

This weight of BB are designed to work in any Airsoft gun, but perform at their best in beginner and low power Airsoft replicas under 350fps. Whether you're new to Airsoft, playing indoors, or looking for BBs for your Spring Powered Airsoft replica then these are the BBs for you.

Produced by NUPROL, these Airsoft Tracer BIO BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the new RZR range of Airsoft BBs ranging from lightweight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.

These particular are that of Tracer BBs in your choice of either red or green. These BBs, when shot are infused light to allow them to glow in the dark.

This weight of BB are designed to work in any Airsoft gun, but perform at their best in beginner and low power Airsoft replicas under 350fps. Whether you're new to Airsoft, playing indoors, or looking for BBs for your Spring Powered Airsoft replica then these are the BBs for you.

A 14mm CCW compatible tracer unit that will illuminate your BBs as they leave the barrel, making it much easier to identify hits, teammate locations, run infection themed skirmishes and generally lighting up the dark with bioluminescence.

The largest hard case produced by NUPROL allowing you to store some serious fire power including sniper rifles! A must for those who want to truly care for their pride and joy.

If you are a midcap user you will know all too well the struggle to quickly reload your magazines between games. Thankfully, NUPROL has the answer! Introducing the 3000rnd BB loader, a design based on existing crank-operated speedloaders but in a more compact form with almost double the capacity!

If you are a midcap user you will know all too well the struggle to quickly reload your magazines between games. Thankfully, NUPROL has the answer! Introducing the 3000rnd BB loader, a design based on existing crank-operated speedloaders but in a more compact form with almost double the capacity!

If you are a midcap user you will know all too well the struggle to quickly reload your magazines between games. Thankfully, NUPROL has the answer! Introducing the 3000rnd BB loader, a design based on existing crank-operated speedloaders but in a more compact form with almost double the capacity!

If you're fed up with fogging goggles, try NUPROL's Battle Visor Full Seal Goggles; Dual Lens! These Airsoft safe goggles are rated EN 166 B and equipped with dual lenses to reduce the potential of vision-obscuring fog. The lenses are made from polycarbonate and the frames are made from TPR with a foam-sealed upper vent port to provide air flow, keeping you fresh in-game.

Available in a wide variety of sporty colour options with Multicam, Tan, Black or Grey for the more discrete, the Battle Visor Dual Lens features a highly adjustable elastic head strap, allowing it to be worn over or under a helmet and remain comfortable all day long. Whether you need eye protection in funky colours for a unique loadout or you're fed up with fog, the NUPROL Battle Visor Full Seal Goggles; Dual Lens are a great option!

If you're fed up with fogging goggles, try NUPROL's Battle Visor Full Seal Goggles; Dual Lens! These Airsoft safe goggles are rated EN 166 B and equipped with dual lenses to reduce the potential of vision-obscuring fog. The lenses are made from polycarbonate and the frames are made from TPR with a foam-sealed upper vent port to provide air flow, keeping you fresh in-game.

Available in a wide variety of sporty colour options with Multicam, Tan, Black or Grey for the more discrete, the Battle Visor Dual Lens features a highly adjustable elastic head strap, allowing it to be worn over or under a helmet and remain comfortable all day long. Whether you need eye protection in funky colours for a unique loadout or you're fed up with fog, the NUPROL Battle Visor Full Seal Goggles; Dual Lens are a great option!

If you're fed up with fogging goggles, try NUPROL's Battle Visor Full Seal Goggles; Dual Lens! These Airsoft safe goggles are rated EN 166 B and equipped with dual lenses to reduce the potential of vision-obscuring fog. The lenses are made from polycarbonate and the frames are made from TPR with a foam-sealed upper vent port to provide air flow, keeping you fresh in-game.

Available in a wide variety of sporty colour options with Multicam, Tan, Black or Grey for the more discrete, the Battle Visor Dual Lens features a highly adjustable elastic head strap, allowing it to be worn over or under a helmet and remain comfortable all day long. Whether you need eye protection in funky colours for a unique loadout or you're fed up with fog, the NUPROL Battle Visor Full Seal Goggles; Dual Lens are a great option!

If you're fed up with fogging goggles, try NUPROL's Battle Visor Full Seal Goggles; Dual Lens! These Airsoft safe goggles are rated EN 166 B and equipped with dual lenses to reduce the potential of vision-obscuring fog. The lenses are made from polycarbonate and the frames are made from TPR with a foam-sealed upper vent port to provide air flow, keeping you fresh in-game.

Available in a wide variety of sporty colour options with Multicam, Tan, Black or Grey for the more discrete, the Battle Visor Dual Lens features a highly adjustable elastic head strap, allowing it to be worn over or under a helmet and remain comfortable all day long. Whether you need eye protection in funky colours for a unique loadout or you're fed up with fog, the NUPROL Battle Visor Full Seal Goggles; Dual Lens are a great option!

If you are looking for short M4/AR15 Airsoft magazines, whether it is for a Vietnam War re-enactment or you just want to get nice and low with your DMR to make good use of cover, NUPROL has the answer. This 110rnd Mid-cap magazine is constructed with a steel shell and polymer internals with a steel feed spring and is super short and easy to carry plenty of.

This magazine is patterned after the real world 20-round M16 magazine issued during the early Vietnam war which also found use in SPR and DMR rifles in the much more recent Iraq and Afghanistan conflicts. This magazine is a spring-loaded mid-cap and is loaded using a speed loader or loading rod/tool through the fill/feed port at the top of the magazine body.

A new electric 6mm airsoft rifle made by NUPROL as a budget entry level RIF but without compromising on quality, and is constructed from polymer this weapon is light weight but tough enough to handle the rigors of an airsoft skirmish. The gun is available in a variety of colours allowing you to pick the perfect gun to match your kit.

The gun features plenty of rail space for attaching aftermarket external parts for customisation, with plenty of options for upgrades available this gun simply cannot be ignored.

A new electric 6mm airsoft rifle made by NUPROL as a budget entry level RIF but without compromising on quality, and is constructed from polymer this weapon is light weight but tough enough to handle the rigors of an airsoft skirmish. The gun is available in a variety of colours allowing you to pick the perfect gun to match your kit.

The gun features plenty of rail space for attaching aftermarket external parts for customisation, with plenty of options for upgrades available this gun simply cannot be ignored.

A recent magazine design that is optimized for the 416 style receiver, the NUPROL LS-Mag EXT Hi-Cap Magazine 450rnd is fully compatible with SCAR-L and M4/AR15 AEG replicas. The magazine holds 450 rounds and is filled via the top fill window. The magazine is constructed from high-density polymer with a steel feed spring, keeping the weight low but providing decent drop and scratch resistance.

The magazine design features strengthening ribs across its surfaces which also double as an area to grip when shooting your AEG in an unconventional stance. On the right side of the magazine body we can find markings indicating "30" next to a bullet symbol, and "Cal. 5.56x45" indicating the calibre of cartridge this style of magazine holds in the real firearm equivalent.

If you need more capacity, but don't want the rattle from carrying high capacity mags, this is what you'll need. With a respectable 200 round capacity, this magazine holds more than comparable mid-caps without being significantly larger than a standard M4/AR15 magazine, allowing it to fit into standard M4/AR15 mag pouches easily.

If you are looking for the Special Forces tactical flashlight of choice, you have found it! Or a near-perfect replica of it, that is! The NUPROL NX600 Scout Tactical Flashlight is a close replica of the real world SF Scout light, the tactical flashlight of choice for special forces around the world. The NX600 is designed to be mounted to 20mm Picatinny rails with its integral mount and can be set up with either the push-button tail cap or a pressure switch, both of which are included in the package. Whether you have a need to distract the enemy as you clear rooms, see where you are going in the darkest of dark CQB sites or you just want your primary to really look the part, a scout style flashlight like the NX600 would be an excellent choice! 

If you are looking for the Special Forces tactical flashlight of choice, you have found it! Or a near-perfect replica of it, that is! The NUPROL NX600 Scout Tactical Flashlight is a close replica of the real world SF Scout light, the tactical flashlight of choice for special forces around the world. The NX600 is designed to be mounted to 20mm Picatinny rails with its integral mount and can be set up with either the push-button tail cap or a pressure switch, both of which are included in the package. Whether you have a need to distract the enemy as you clear rooms, see where you are going in the darkest of dark CQB sites or you just want your primary to really look the part, a scout style flashlight like the NX600 would be an excellent choice! 

For those of you looking for a mid-cap magazine, but still want to hold a substantial amount of BBs to reduce reloads this magazine is what you're looking for.

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a check and dot pattern ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.

For those of you looking for a mid-cap magazine, but still want to hold a substantial amount of BBs to reduce reloads this magazine is what you're looking for.

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a check and dot pattern ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.

A small and compact Block Battery designed and built by NUPROL specifically for Airsoft Skirmishers, intended to last a whole day Airsofting, but have limited battery storage space in their AEG.