RIS/RAS Rail & Attachments

You can now customise the stock on your SIG MCX! Been wanting to run an AR collapsible Stock? Well, now you can! The Airsoft Artisan M4/AR-15 Buffer Tube Adapter for SIG MCX/1913 Stock Interface allows you to mount a milspec buffer tube, either real steel or GBBR style onto your 1913/20mm stock interface equipped platform, whether it's an MCX, MPX or otherwise!

You can now customise the stock on your SIG MCX! Been wanting to run an AR collapsible Stock? Well, now you can! The Airsoft Artisan M4/AR-15 Buffer Tube Adapter for SIG MCX/1913 Stock Interface allows you to mount a milspec buffer tube, either real steel or GBBR style onto your 1913/20mm stock interface equipped platform, whether it's an MCX, MPX or otherwise!

If you want to take pure advantage of the upgraded internals of your SSP18 GBB, the Novritsch Minimalist Carbine Kit is what you need! This setup adds a CNC aluminium chassis to the SSP18 GBB pistol with a 20mm Picatinny rail up top, a high-density polymer side folding USW-style stock and a holster lug for the Novritsch Universal Holster on the left side.

This transforms the SSP18 from an impressive pistol into a uniquely functional GBB SMG with holster compatibility and the ability to mount a red dot sight or scope. The addition of a stock alone will allow for more accurate long-range shots and allow upgraded internals of the SSP18 to really shine through. Whether it is a sidearm or your primary, the Minimalist Carbine Kit paired with the SSP18 GBB is a phenomenal combination!

If you need something to dazzle your opponents on the battlefield, there isn't a better choice than this! The Vaide Scrapper Pistol Flashlight w/ Strobe mounts straight onto to 20mm Picatinny rails, whether that be on your pistol, SMG or other Airsoft platform. It is constructed from aluminium with a steel mounting bolt, keeping the weight low but ensuring the steel mounting bolt is strong enough to keep this flashlight attached to your platform.

There are three different brightness options, ranging from 40 to 500 lumens, so depending on how nice you are feeling on a skirmish day, you can really daze some opponents with this flashlight! It also features a rechargeable battery which uses a magnetic connector, so you don't need to keep spending money on batteries, because as you can imagine, 500 Lumens sucks the juice out of batteries rather rapidly.

If you're fed up with missing out on kills while you're busy reloading, the Action Army Mag Carrier Foregrip for 20mm Picatinny Rail should be in your sights! Constructed from high-density polymer with steel screws and nuts, this device functions as a foregrip for 20mm Picatinny rails and also holds a single AAP-01 or EU-series GBB pistol mag; on board the pistol and ready to be slapped in double time!

When installed, your spare magazine is retained by a left/right swappable mag catch, meaning left or right-handed users can set Mag Carrier Foregrip up to suit them perfectly. The set also includes a pair of 20mm Picatinny side rails so you don't have to ditch your tactical flashlight or laser to use this nifty device. Please note, if you're planning to use this with a standard AAP-01 Assassin you'll need the AAP-01 Advanced Pistol Rail Set to mount it and it doesn't quite fit the AAP-01C due to alignment with its built-in rail.

If you're running a primary pistol which takes EU-series mags and is rocking a 20mm Picatinny frame rail, the Action Army Mag Carrier Foregrip for 20mm Picatinny Rail will have you back online after a reload in seconds!

If you are running a SCAR and you want to make it sexy a rail extension is the key to making jaws drop! The Double Bell M-LOK 5 Inch Handguard Extension For SCAR is designed to fit the Double Bell SCAR-H (it will not fit the Double Bell SCAR-L) but should also fit the DBoys SCAR-H and VFC SCAR-L and SCAR-H AEGs as well as others based on the VFC construction style.

The handguard boasts CNC Aluminium construction for precision and weight savings and comes packaged with a 9.3cm/3.75-inch barrel extension so your outer barrel is the correct length for the extension. Present on each side is a QD sling socket to give you the option to add a slick QD sling setup with QD sling swivels. On each side and on the bottom we have M-LOK negative space attachment slots and on the top of the extended piece there is a short length of 20mm Picatinny rail in the ideal spot to mount a PEQ, DBAL or tactical flashlight. Ditch those 20mm rails and get some M-LOK on your SCAR and get it ready for combat in the 2020s!

The M322 Scout Tactical Flashlight is a modern LED torch with RM45 offset mount for Picatinny 20 mm rail. This flashlight produces a fantastic 280 lumens from 1x CR123 battery, made possible due to the modern CRE2 LED bulb installed.

An advantage of this torch over similar models is that it comes with 2 switches that can be used in tandem, thank to the dual function tail cap. It features a constant on push button in addition to a lead-attached pressure switch . This means that you don't have to unscrew one to get to the other, like in some other flashlight models.

Another feature unique to this torch is the mount, in that it is an offset mount that allows it to be mounted closer to the handguard for a slick overall platform.

Do you find that there are not enough attachment slots on your current MCX handguard? If so then the Airsoft Artisan 10" Spear Handguard Set for SigAir MCX Virtus is for you! It features a modernised design with a 20mm Picatinny rail on top and M-LOK sections at 3, 6 and 9 o'clock, plus additional offset M-LOK slots at the lower diagonals and in line with the gas block cutout. This is an improvement upon the original MCX handguard as the extra M-LOK slots allow for more attachment space and the added angles mean more customisation is available when it comes to style and ergonomics.

This handguard and barrel are constructed from CNC machined aluminium, which makes them not only very strong but also ensures that they are flawless in their design. The Airsoft Artisan 10" Spear Handguard Set for SigAir MCX Virtus is the best way to give your MCX an external facelift and keep it up to date with the latest MCX variant, the MCX-SPEAR.

If you want to take full advantage of the incredible long-range performance of your Novritsch SSX23, the Novritsch 20mm Picatinny Slide Rail for SSX23 NBB will help! This aluminium 20mm Picatinny rail mount fits directly to the SSX23 slide, packaged with the correct screws to get it mounted straight away. This means you can fit a compact red dot sight to your SSX23, increasing long-range accuracy and target acquisition speed by removing the need to properly align the fibre optic sights. 

While you might not use them often with your red dot sight mounted, the fibre optic sights of the SSX23 are not obstructed when the rail is installed, meaning if your red dot battery runs out mid-firefight you can still land hits with ease!

If you're running a flashlight and laser on a compact primary, the PTS Syndicate Unity Tactical AXON Dual Pressure Switch; Modular will make your setup more intuitive to run than ever before! Designed to take up as little rail space as possible while providing functionality similar to the Unity TAPS switch, the AXON is about as small as dual switches get, measuring approximately 7cm end to end. The integrated mount fits 20mm Picatinny rails but an M-LOK adapter plate is included, allowing you to fit the AXON to M-LOK slots.

The set includes a silver 2.5mm plug, a gold 2.5mm plug, a Crane plug and a SureFire plug, all of which are compatible with other plugs in the PTS Unity ecosystem. Each button on the AXON switch can be operated in both momentary-on and constant-on modes. For the angled switch, a half-press activates constant-on and a full press activates momentary-on. With the flat switch, a single press provides constant-on, and a double tap provides momentary on.

Designed with ergonomics in mind, the AXON can also be used as a hand stop and works perfectly mounted to the 12 o'clock rail with the "thumb over bore" or "C-clamp" grip. If you're sick of the struggle of running multiple pressure switches and seek a more professional looking primary, the PTS Syndicate Unity Tactical AXON Dual Pressure Switch; Modular will give you what you need!

If you're running a flashlight and laser on a compact primary, the PTS Syndicate Unity Tactical AXON Dual Pressure Switch; Modular will make your setup more intuitive to run than ever before! Designed to take up as little rail space as possible while providing functionality similar to the Unity TAPS switch, the AXON is about as small as dual switches get, measuring approximately 7cm end to end. The integrated mount fits 20mm Picatinny rails but an M-LOK adapter plate is included, allowing you to fit the AXON to M-LOK slots.

The set includes a silver 2.5mm plug, a gold 2.5mm plug, a Crane plug and a SureFire plug, all of which are compatible with other plugs in the PTS Unity ecosystem. Each button on the AXON switch can be operated in both momentary-on and constant-on modes. For the angled switch, a half-press activates constant-on and a full press activates momentary-on. With the flat switch, a single press provides constant-on, and a double tap provides momentary on.

Designed with ergonomics in mind, the AXON can also be used as a hand stop and works perfectly mounted to the 12 o'clock rail with the "thumb over bore" or "C-clamp" grip. If you're sick of the struggle of running multiple pressure switches and seek a more professional looking primary, the PTS Syndicate Unity Tactical AXON Dual Pressure Switch; Modular will give you what you need!

If you want to add a modern touch to your AK, the CYMA Aluminium KeyMod Handguard for AK-47/74 is what you need! This CNC Aluminium handguard is equipped with KeyMod negative space attachment slots at 3, 6, & 9 o'clock with a 20mm Picatinny rail running along the top, ready for a PMC-style forward-mounted red dot sight. 

On each side, we are treated to a pre-installed 20mm Picatinny rail adapter for KeyMod, giving you the option of using more common 20mm Picatinny accessories or removing the adapters to mount more modern KeyMod solutions. The handguard itself is constructed in two parts, allowing you to use both or simply the upper or lower handguard, depending on your build requirements. If you're going for the modern tactical AK look, the CYMA Aluminium KeyMod Handguard for AK-47/74 is perfect for your build!

If you're into cutting edge real steel kit, the PTS Syndicate Unity Tactical FAST LPVO Scope Mount Set should put a smile on your face! Made from 6000 series aluminium alloy machined using CNC technology to the high standards we all expect from PTS, this mount set is licenced by Unity Tactical and includes gorgeous trademarks across the design, furnishing anything it is mounted to with the elite, "gucci" look.

The set includes a dual ring mount designed to position the mechanical centreline of your scope at 2.05-inches above the rail, giving you a slightly higher mount than most. This is great for modern shooting stances and a fantastic feature for Airsoft skirmishers running lower face masks, giving you a more comfortable neck position so you can concentrate on landing those hits. Also included is an offset sight adapter, an RMR adapter plate and an Aimpoint Micro adapter plate, allowing you to run an offset back-up red dot sight without the hassle of sourcing the correct mounting hardware.

If you seek the versatility of an LPVO with an offset red dot sight and want a premium quality mount with slick licensed markings and everything you need to get set up included, the PTS Syndicate Unity Tactical FAST LPVO Scope Mount Set is the best option out there!

If you're into cutting edge real steel kit, the PTS Syndicate Unity Tactical FAST LPVO Scope Mount Set should put a smile on your face! Made from 6000 series aluminium alloy machined using CNC technology to the high standards we all expect from PTS, this mount set is licenced by Unity Tactical and includes gorgeous trademarks across the design, furnishing anything it is mounted to with the elite, "gucci" look.

The set includes a dual ring mount designed to position the mechanical centreline of your scope at 2.05-inches above the rail, giving you a slightly higher mount than most. This is great for modern shooting stances and a fantastic feature for Airsoft skirmishers running lower face masks, giving you a more comfortable neck position so you can concentrate on landing those hits. Also included is an offset sight adapter, an RMR adapter plate and an Aimpoint Micro adapter plate, allowing you to run an offset back-up red dot sight without the hassle of sourcing the correct mounting hardware.

If you seek the versatility of an LPVO with an offset red dot sight and want a premium quality mount with slick licensed markings and everything you need to get set up included, the PTS Syndicate Unity Tactical FAST LPVO Scope Mount Set is the best option out there!

If you have seen Saving Private Ryan and now you want a scoped Springfield rifle, this should get you there! The S&T 20mm Rifle Scope Mount for M1903A3 Springfield is constructed from aluminium and accepts common 20mm Picatinny scope rings, allowing you to fit whatever scope you desire to your Springfield provided the rings can be spaced to fit the mount. The spacing between the two rail sections is 7.5cm approximately, meaning most telescopic sights with separate rings will fit right on with the rings in the right position. 

The mount replaces your rear iron sight and sits over the receiver when installed and requires additional screws (not included) to attach it to the rifle. Please note, this mount will not work with optics which have built-in 20mm rail mounts and is intended for use with optics which use separate scope rings. 

If you're running a laser and flashlight on your primary, the PTS Syndicate Unity Tactical TAPS Dual Pressure Switch; Modular will make using these devices that bit easier! Designed to provide a single control location for both your flashlight and laser, the TAPS can be installed wherever you need it on any 20mm Picatinny, M-LOK or KeyMod rail system via its innovative modular mount. Forget using Velcro or zip-ties to keep your tatty pressure switches on board, the TAPS will keep your primary neat and furnish it with the high-end Unity Tactical look!

The innovation doesn't end with the mount either! Unlike comparable clones, the TAPS offers a modular plug system providing broad compatibility with the most common lights and lasers out there. Included in the set is a SureFire plug, an Insight plug, a silver plug for 3.5mm jacks and a gold plug for 3.5mm jacks, which can be used in whatever configuration suits the user.

Putting control of your light and laser literally beneath your fingertips, the PTS Syndicate Unity Tactical TAPS Dual Pressure Switch; Modular is not only user-friendly but also boasts official licensing from Unity Tactical, completing the elite look with licensed trademarks. If you're working on a build which needs the high-end look, the TAPS belongs on your gat!

If you're rocking the remarkable Novritsch SSE18 AEP and want to stretch its legs, the SSE18 Minimalist Carbine Kit is a great way to do it. Constructed with a CNC aluminium chassis and a high-density polymer stock, this carbine kit transforms the SSE18 into a nifty little SMG and allows you to take full advantage of its impressive range. 

Like the Minimalist Carbine Kit for SSP18 GBB, this carbine kit is equipped with a 20mm Picatinny rail up top, ready for a red dot sight or scope, and a magnetic locking folding stock at the rear. Also present is a lug for the Novritsch Univeral Holster system machined into the left side. Given the low weight of the completed setup, we think the SSE18 in the Minimalist Carbine kit is a superb sidearm for a sniper; small enough that it won't slow you down if carried on a belt with full auto on tap to keep the enemy at pay if you get spotted!

If you want to optimise your MCX for CQB, the Airsoft Artisan Spear LT SBR Handguard & Barrel Set for SigAir MCX Virtus will get you there. This set includes a 7-inch outer barrel and a detailed replica of the real steel Spear LT SBR handguard, both CNC machined from aluminium with the precision we expect from Airsoft Artisan. 

The Spear LT SBR handguard features M-LOK slots at the 3, 6 and 9 o'clock positions with additional slots at the lower offset angles and a single extra slot on each side, just ahead of the gas block cutout. This matches the handguard of the latest MCX SBR variant, keeping your MCX at the cutting edge of modern platforms. If your MCX needs to lose a few inches and gain a few M-LOK slots, the Airsoft Artisan Spear LT SBR Handguard & Barrel Set for SigAir MCX Virtus will sort it out!

If your M4/AR-15 AEG needs a high-end makeover, the EMG Daniel Defense DD4™ RIII™ Metal Receiver for M4/AR-15 AEG is what it needs! Styled to match the receiver of the latest real steel Daniel Defence DD4™ RIII™ rifles, this receiver is made from flawlessly machined aluminium with an anodised surface finish to guarantee it maintains its good looks in the long term!

The set includes the upper receiver, lower receiver, front and rear body pins, an ambidextrous Grip-N-Rip® charging handle with mock bolt and a Daniel Defense marked polymer dust cover, completing the elite DD look. The upper receiver features DD4™ RIII™ markings prominently engraved and the right side of the magazine well includes realistic Daniel Defense roll marks, just like the real thing. As we might expect, the upper receiver also includes a 20mm Picatinny rail, ready for your choice of optical sight. 

This receiver is designed to fit M4/AR-15 AEGs and should fit most standard non-ambidextrous version 2 gearbox internals, making it the ideal way to style up your boring M4! The rear includes the standard AEG buffer tube mounting lug and the front features standard receiver threading; compatible with a wide range of barrel nuts and handguards so you can get the look you need. Whether you've got a polymer M4 that needs a realism boost or you want a bit of that in-vogue DD flair for your platform without buying a new gun, the EMG Daniel Defense DD4™ RIII™ Metal Receiver for M4/AR-15 AEG is a slick piece of kit!

If you want to save some weight on your AR36 or Novritsch SSR63 and give it a whole new look, you have found what you need! The Novritsch Minimal 20mm Picatinny Rail Kit for SSR63/AR36 AEG is constructed from alloy with steel mounting bolts and is compatible with the full range of Novritsch SSR63 AEGs as well as most AR36 AEG and GBBR platforms. The part is manufactured by Double Bell, includes built-in flip-up iron sights and is based on the real steel KAC design. 

The set provides a 20mm Picatinny top rail measuring approximately 10cm in length, enough for most red dot sights and smaller magnified scopes while minimising excess material to keep the weight low. The built-in flip-up iron sights are fully adjustable, with a single rear aperture which can be raised and lowered by turning the drum just below the aperture and adjusted left and right via the drum on the right side. If your AR36 needs a style up or you want to lean in to the light and tight design philosophy of the Novritsch SSR63, this kit is the perfect upgrade!

If you're stuggling to get a good view through your red dot sight when wearing face protection, the WADSN High 20mm Picatinny Mount for T1/T2 Red Dot & PEQ Box will solve that issue! This raised optic mount is patterned after real steel "Hydra" mounts, offering a raised mount for T1/T2 style red dot sights and a 20mm Picatinny rail for a PEQ/DBAL laser unit or scope camera. This mount is designed for 20mm Picatinny rails and includes a pair of "recoil lugs" on the bottom which hold it in place firmly on your rail. 

The High 20mm Picatinny Mount for T1/T2 Red Dot & PEQ Box should fit most T1 and T2 clones provided they correctly replicate the real Aimpoint Micro mounting standard and is also compatible with the Novritsch Red Dot Sight V3, Vector Optics Maverick, Vortex Sparc Solar and Holosun 403B. Being slightly higher than a standard T1 mount, the High 20mm Picatinny Mount for T1/T2 Red Dot & PEQ Box is ideal for those who have a hard time getting a clear sight picture using full face protection, being designed in the real world for use with respirators and night vision devices. 

If you have the Novritsch SSR63 A2 or A3 and it is a bit long for your playstyle, this is what you need to shorten her up a bit! The Novritsch Short Conversion Kit for SSR63 A2/A3 AEG includes a "C" length outer barrel with 14mm CCW male threads at the tip, a 6.03mm tightbore inner barrel and a CNC aluminium M-LOK handguard with 20mm Picatinny rail sections in key locations. 

This set includes everything you need to transform your SSR63 A2 or A3 into the short configuration, shaving a few precious inches off the barrel so you can clear corners more effectively and have better mobility in CQB scenarios. Whether you want to hot-swap your SSR63 A2/A3 for the odd CQB game or you prefer a shorter primary to maximise aggression, this kit should suit you perfectly!

If your MCX is a bit of a pig and you want more agility, the Airsoft Artisan 10" Carbon Fibre Handguard for MCX Virtus AEG will do the trick. This handguard is constructed from authentic Carbon Fibre and as such, it tips the scales at only 123g! Though this handguard will help your MCX lose weight, it does so without compromising on attachment interfaces, offering M-LOK slots at 3, 6, 9 and 12 o'clock and additional slots at the lower offset angles.

Another advantage of the Carbon Fibre handguard is its width of approximately 48mm, allowing you to run an integrally suppressed setup and still make use of your M-LOK slots provided your suppressor is slim enough. The set also includes a short section of aluminium 20mm Picatinny rail for M-LOK pre-installed on the rearmost upper M-LOK slot, designed to seamlessly interface with your receiver rail. If you're seeking a speedy look for your MCX without compromising accessory options, the Airsoft Artisan 10" Carbon Fibre Handguard for MCX Virtus AEG is what you need!

If you're planning on rocking your Glock as a primary, the Acetech Genesis Tracer Unit is the ONLY accessory you'll need! This beastly unit combines tracer functionality, muzzle flash, a super-bright tactical flashlight and a red aiming laser all in one. With vibes of the menacing Maxim 9 but filled with technology, the Genesis is available in two different length variants for either the Glock 19 or Glock 17/18 platforms.

With all the exciting tracer functions of the legendary Bifrost, along with Bluetooth connectivity allowing you to measure FPS and rate of fire of your pistol using Acetech's AceSoft App, the sheer amount of functionality built into this sleek device is without equal. Choose from 7 muzzle flash colour options, rainbow mode, dynamic rainbow mode and more, and that's before we discuss what the integral red aiming laser and tactical flashlight can do!

The laser can be zeroed, and the flashlight offers momentary on, constant on and stroboscopic mode, all of which are controlled using an ambidextrous rocker switch - a familiar switch setup to those who run an X300 or TLR-style pistol flashlight. If you run a Glock GBB pistol as your CQB primary, the Acetech Genesis Tracer Unit is how you make the most of it!

If you plan to mount a two-point sling, one of these might be useful! The Vector Optics Offset Sling Mount for 20mm Picatinny Rail is constructed from aluminium alloy and is rated to handle the recoil of real firearms so you can be confident it will never fail when used for Airsoft. The mount fits any 20mm Picatinny rail and is ideal for mounting to a handguard and pairing with a rear sling point so you can mount a two-point sling setup.

The sling loop hole measures approximately 7mm in diameter, meaning it should fit most sling hooks but if you find the fit is a bit too light we suggest using a keyring or paracord loop to provide a bit more flexibility and a wider variety of sling compatibility.

A combination scope and side rail 20mm RIS rail mount designed to fit on both Airsoft Electric and Gas type AK Platform weapons which feature a side mount plate. 

An incredibly robust mounting system for any 30mm tubed optic. This setup secures onto your 20mm Picatinny rail system with 4 securing bolts to provide a rock solid mount with recoil resistance. 

If you're running a red dot with magnifier setup and want a more comfortable neck position, the PTS Syndicate Unity Tactical FAST™ FTC Aimpoint Magnifier Mount will sort that out! This mount is designed for old-school magnifiers which use a ring-style mount, offering compatibility with most 30mm tube magnifiers including the Vector Optics Flip To Side Magnifier.

Constructed from flawlessly machined CNC aluminium with a steel mounting bolt, this mount is unique in its FTC (Flip to Centre) configuration. This means when stowed, your magnifier won't hang off the side of your primary; instead, it pushes straight down to stow just below your primary optic, keeping the sides of your primary clean for reduced snag potential.

The Unity Tactical FAST™ FTC OMNI Magnifier Mount is set to position your magnifier at 2.26" from the rail to the centre of the optic (aka optical centreline), meaning you will in most cases require an equivalent height riser to align your red dot with your magnifier. Thankfully, PTS offers theFAST Riser,FAST MRO Mount andFAST Micro Mount to facilitate this.

Being higher over the rail than standard magnifier mounts makes this setup ideal for full-face mask users or those who run active hearing protection, avoiding the need for straining your neck to see down your sighting system. If you're running face protection and don't want to ditch your magnifier, the PTS Syndicate Unity Tactical FAST™ FTC Aimpoint Magnifier Mount is what you need!

If you're looking for a sleek new look for your M4/AR-15 or AR-9 AEG, check this out! The EMG Daniel Defense RIS III 12.5" M-LOK Handguard is officially licenced by Daniel Defense via EMG, boasting licenced trademarks across the design and flawlessly imitating the profile of the real DD RIS III handguard. 

The RIS III handguard is an advancement from the DD RIS II, the handguard seen on the iconic MK18 MOD.1 rifle used by the US Navy SEALs, Delta and all the other big names in the US Armed Forces. The RIS III saves weight by using M-LOK slots on the side and bottom but retains the military style two-piece construction, designed to allow an M203 Grenade Launcher to be mounted with the lower segment removed. 

Up top, we have a full length 20mm Picatinny rail, ready for your lasers, flashlights or other tactical dodads and on the sides and bottom, M-LOK negative space attachment slots, ready for your choice of M-LOK accessories or 20mm Picatinny rail adapters. Like other M4/AR-15 handguards, you'll need an AR-15 Armourers wrench to install this and the set includes the correct barrel nut to mount it. If your AR is a bit on the heavy side and aging rapidly, the EMG Daniel Defense RIS III 12.5" M-LOK Handguard will give it a spritely, energetic feeling and modernise it to the cutting edge!

If you're looking for a sleek new look for your M4/AR-15 or AR-9 AEG, check this out! The EMG Daniel Defense RIS III 12.5" M-LOK Handguard is officially licenced by Daniel Defense via EMG, boasting licenced trademarks across the design and flawlessly imitating the profile of the real DD RIS III handguard. 

The RIS III handguard is an advancement from the DD RIS II, the handguard seen on the iconic MK18 MOD.1 rifle used by the US Navy SEALs, Delta and all the other big names in the US Armed Forces. The RIS III saves weight by using M-LOK slots on the side and bottom but retains the military style two-piece construction, designed to allow an M203 Grenade Launcher to be mounted with the lower segment removed. 

Up top, we have a full length 20mm Picatinny rail, ready for your lasers, flashlights or other tactical dodads and on the sides and bottom, M-LOK negative space attachment slots, ready for your choice of M-LOK accessories or 20mm Picatinny rail adapters. Like other M4/AR-15 handguards, you'll need an AR-15 Armourers wrench to install this and the set includes the correct barrel nut to mount it. If your AR is a bit on the heavy side and aging rapidly, the EMG Daniel Defense RIS III 12.5" M-LOK Handguard will give it a spritely, energetic feeling and modernise it to the cutting edge!