RIS/RAS Rail & Attachments

If you're looking for a sleek new look for your M4/AR-15 or AR-9 AEG, check this out! The EMG Daniel Defense RIS III 12.5" M-LOK Handguard is officially licenced by Daniel Defense via EMG, boasting licenced trademarks across the design and flawlessly imitating the profile of the real DD RIS III handguard. 

The RIS III handguard is an advancement from the DD RIS II, the handguard seen on the iconic MK18 MOD.1 rifle used by the US Navy SEALs, Delta and all the other big names in the US Armed Forces. The RIS III saves weight by using M-LOK slots on the side and bottom but retains the military style two-piece construction, designed to allow an M203 Grenade Launcher to be mounted with the lower segment removed. 

Up top, we have a full length 20mm Picatinny rail, ready for your lasers, flashlights or other tactical dodads and on the sides and bottom, M-LOK negative space attachment slots, ready for your choice of M-LOK accessories or 20mm Picatinny rail adapters. Like other M4/AR-15 handguards, you'll need an AR-15 Armourers wrench to install this and the set includes the correct barrel nut to mount it. If your AR is a bit on the heavy side and aging rapidly, the EMG Daniel Defense RIS III 12.5" M-LOK Handguard will give it a spritely, energetic feeling and modernise it to the cutting edge!

The Novritsch SSG10 Full Top Rail Gen.2 allows you to extend your top rail so you can mount any optic you desire atop your Novritsch SSG10. It is a 20mm Picatinny rail so will comfortably harbour most of the common scopes and sights found on the market. The rail screws into the top of your SSG10 receiver with the 4 screws provided, this keeps it securely attached to your sniper rifle, even with the chunkiest of scopes attached!

Make your SSG10 uniquely yours with the Novritsch SSG10 Full Top Rail Gen.2 and mount the perfect scope onto this rail to accommodate your sniping needs.

If you're moving away from standard scope rings in favour of something more modern and lightweight, the Novritsch One-Piece 20mm Picatinny Scope Mount; 25mm Tube is ideal. This single-piece scope mount follows modern trends, combining the front and rear scope ring for a more robust combination setup which is easier to mount as a bonus. 

Its aluminium construction keeps the weight of the One-Piece 20mm Picatinny Scope Mount to a minuscule 138 grams and its raised optical centreline means your scope sits slightly higher than usual, ideal for those who like to keep their knashers protected behind a face mask while skirmishing. Each ring also includes a single slot of 20mm Picatinny rail, ideal for micro red dot sights, Runcam/action cameras or whatever other equipment you need to complete the mission at hand!

Compatibility-wise, this mount should fit any LPVO or Rifle Scope with a 25mm monotube but will not fit 30mm monotube optics. If you want a more advanced scope mounting solution for your primary or have trouble looking through your scope due to your face-pro choice, the Novritsch One-Piece 20mm Picatinny Scope Mount; 25mm Tube is what you need!

The VSR/Bar-10 is still an absurdly popular rifle today, only one problem - No bottom RIS rail! Fear not Laylax have just the thing, a 20mm RIS rail that fits over your front Harris lug. Measuring roughly 9.5cm and just under 4 inches, the rail allows you to attach some much needed tactical equipment to your VSR, such as a bipod for additional sniping stability.

Constructed from tough, but lightweight aluminium, the rail is screws in place to the underside of the fore stock. It also comes with a magazine catch so you can still reload as you normally would. Treat yourself and your VSR to some additional tactical upgrades with a rail mount!

If you love the way the AAP-01 shoots but don't get along with its looks, the Action Army Black Mamba Type A Upper Receiver for AAP-01; CNC Alu belongs on your shopping list! Made from superb quality CNC machined aluminium with steel iron sights, this is the Type A version, furnished with a futuristic hexagonal machined pattern on either side which only adds to its menacing aesthetic.

Up front, the Black Mamba is rocking an aggressive muzzle brake with a dynamic shape which blends seamlessly with the receiver itself, mounting to 14mm CCW male barrel threading at the front. If you want to run a tracer for improved instinct aiming in low light, unscrew the knurled nut at the front to remove the muzzle brake to access the barrel threads.

Up top, we have a pair of adjustable iron sights; a light-enhancing front sight with an adjustable anti-glare rear sight. These sights are fantastic to use and very modern, though the integral 20mm Picatinny rail running between also allows you to mount a red dot sight or scope. On the bottom, we have another built-in 20mm Picatinny rail, ready for your tactical flashlight or aiming laser. The Black Mamba Type A is compatible with both the AAP-01 Assassin and the AAP-01C Shinobi and is what you need to make your AAP stand out!

Built from lightweight polymer, these rail panels are designed to cover 20mm RIS / RAS rails and offer a more comfortable grip on your RIF.

Built from lightweight polymer, these rail panels are designed to cover 20mm RIS / RAS rails and offer a more comfortable grip on your RIF.

A very easy to use fore grip that can be locked in a compact or full vertical position depending on your situation and requirements. 

An Aluminium Alloy constructed Cantilever mount for 30mm Scopes, which easily mounts onto 20mm RIS/RAS Rail Systems. It offers two connection points with four securing screws in each mount. The base of the mount attaches to 20mm rails by unscrewing the securing nuts, placing onto the rail and re-tightening.

If you have rail space to fill and want the purebred operator look for your primary, a PEQ box is a great way to elevate the look of your rifle. The WADSN PEQ15 LA-5C comes with the added benefit that it doesn't just look really cool, it is also a functional aiming laser and tactical flashlight! This PEQ unit provides both bright white light and a red aiming laser which can be activated either using the onboard activation button or the included pressure switch. The WADSN PEQ15 LA-5C requires two CR123a cells, either standard disposable cells or rechargeable cells. 

If you have a TM MK23 you know that bad boy deserves a tactical flashlight or laser aiming module! The Laylax 20mm Picatinny Rail Adapter Version 2 is designed for exactly that and mounts to the ironically named "universal rail" on the MK23 dust cover/frame to provide a rail which actually is universal, the 20mm Picatinny rail.

The adapter itself is constructed from aluminium and has a matt black anodised finish applied, blending perfectly with the MK23's stealthy form. The rail is approximately 7cm long with 5 slots machined in and has a gentle bevel at the front to aid with re-holstering.

If you need a scope mount with some interesting tricks up its sleeve, the Novritsch One-Piece 20mm Picatinny Scope Mount V2; 25/30mm Tube is exactly that! Constructed from aluminium with a QD 20mm Picatinny mounting interface, the One-Piece 20mm Picatinny Scope Mount V2 is easy to mount to any 20mm Picatinny rail and is nice and lightweight, tipping the scales at a surprisingly low 200 grams.

The V2 is compatible with either 25mm/1-inch or 30mm monotubes, making it useful for almost every magnified rifle scope out there thanks to the included ring spacers. On the top of each ring, we are treated to mounting holes for the included modular 20mm Picatinny rail section, allowing you to fit it to the front or rear ring and install a Runcam, micro red dot sight or whatever else you fancy. The V2 is set at the standard (for AR platforms) optical centreline height, making it ideal for most Airsoft platforms but if you need something a bit higher, check out the original One-Piece 20mm Picatinny Scope Mount; 25mm Tube!

Integral to the mount's design and visible from the rear we also have a bubble level, allowing you to ensure your rifle is perfectly horizontal before taking that key, game-winning shot. If you love a lightweight scope mount which is easy to fit and packs in a lot more functionality than its rivals, the Novritsch One-Piece 20mm Picatinny Scope Mount V2; 25/30mm Tube will suit you perfectly!

If you need a compact tactical flashlight for your pistol, SMG or short-barreled rifle, check out the OPSMEN Fast 402 Ultra Weapon Light! This tactical flashlight is constructed from 6061 aviation-grade aluminium alloy and boasts an integral 20mm Picatinny rail mount and a built-in multi-function switch.

The Fast 402 outputs a maximum of 600 Lumens with a 150-meter beam throw, making it bright enough to dazzle the enemy when you breach a room in CQB with enough range to illuminate targets at longer ranges. Its robust construction grants the Fast 402 recoil resistance, 1.5m impact resistance and IPX7 water and dust resistance, ensuring it is battle-ready, even mounted on a heavy recoiling GBBR. If you're looking for an affordable tactical flashlight which is more robust than the average, the Fast 402 is what you need!