VORSK Airsoft

Produced by VORSK Airsoft, these Airsoft BIO BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.

These particular BBs are BIO 0.36g BBs which are created from biodegradable materials so that they will gradually break down with time when exposed to natural environments. Touted as a more environmentally friendly BB, they are sometimes required by certain Airsoft sites to play. 

These 0.36g BBs are seated well in the middle of the Heavyweight Scale, meaning that they're incredibly precise when used in a well-tuned Rifle. This extra weight helps them stay stable in flight, less affected by the wind, leaves and branches etc, which makes them a great choice for Sniper Rifles and DMRs that need to make sure that every shot hits (and that the hit is called when it does land).

A Super Performance enhancing Green Gas designed for use in Gas Blowback Rifles. The VORSK V12 Green Gas provides you with a highly consistent composition of Gas to Silicone lubricant ratio, thus keeping your magazines and seals healthy while providing you with an ULTRA STRONG recoil and great shot-to-shot consistency! VORSK V12 Is the perfect Fuel for your GBBR. 

Produced by VORSK Airsoft, these Airsoft Tracer BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.

These particular BBs are Tracer 0.28g BBs which have been infused with glow in the dark materials allowing them to be fired through Airsoft Tracer units to sling a glowing BB down range at your target. Available in Green these Tracer BBs are Super fun for use in dark environments to track your shots as they fly, or to add to the end of a magazine to let you know you're running low.

This weight of BBs is specifically designed with a higher weight to allow it to punch through light wind and bushes with ease, allowing you to be more effective in outdoor games. These  BBs perform best when used in Airsoft guns between 300fps - 400fps, and are great in replicas which have had upgrades or come with an extremely good hop out of the box.

Produced by VORSK Airsoft, these Airsoft Tracer BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.

These particular BBs are Tracer 0.28g BBs which have been infused with glow in the dark materials allowing them to be fired through Airsoft Tracer units to sling a glowing BB down range at your target. Available in Green these Tracer BBs are Super fun for use in dark environments to track your shots as they fly, or to add to the end of a magazine to let you know you're running low.

This weight of BBs is specifically designed with a higher weight to allow it to punch through light wind and bushes with ease, allowing you to be more effective in outdoor games. These  BBs perform best when used in Airsoft guns between 300fps - 400fps, and are great in replicas which have had upgrades or come with an extremely good hop out of the box.

Produced by VORSK Airsoft, these Airsoft Tracer BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.

These particular BBs are Tracer 0.28g BBs which have been infused with glow in the dark materials allowing them to be fired through Airsoft Tracer units to sling a glowing BB down range at your target. Available in Green these Tracer BBs are Super fun for use in dark environments to track your shots as they fly, or to add to the end of a magazine to let you know you're running low.

This weight of BBs is specifically designed with a higher weight to allow it to punch through light wind and bushes with ease, allowing you to be more effective in outdoor games. These  BBs perform best when used in Airsoft guns between 300fps - 400fps, and are great in replicas which have had upgrades or come with an extremely good hop out of the box.

VORSK bring us another unique and cutting-edge entry in their line-up of ever popular pistols. Being a hybridised version of the iconic 1911 design, this pistol breaks the mould by taking Hi-Capa magazines, bringing this sidearm to new heights. The VX-14 features a tonne of ultra- modern design choices such as grippy V-textured side panels, cut slide grooves for ease of racking and a 20mm RIS pistol rail for aftermarket tactical devices to bring your competitive pistol shooting to a new level.

But the real trick the VX-14 has up its sleeve is the inclusion of a suppressor, as well as an inner barrel extension. The suppressor can be installed with or without the barrel extension, giving you a choice of FPS, depending on the conditions at hand.

VORSK bring us another unique and cutting-edge entry in their line-up of ever popular pistols. Being a hybridised version of the iconic 1911 design, this pistol breaks the mould by taking Hi-Capa magazines, bringing this sidearm to new heights. The VX-14 features a tonne of ultra- modern design choices such as grippy V-textured side panels, cut slide grooves for ease of racking and a 20mm RIS pistol rail for aftermarket tactical devices to bring your competitive pistol shooting to a new level.

But the real trick the VX-14 has up its sleeve is the inclusion of a suppressor, as well as an inner barrel extension. The suppressor can be installed with or without the barrel extension, giving you a choice of FPS, depending on the conditions at hand.

A gas blowback Airsoft magazine developed by VORSK for their G-Series range of pistols, constructed with an Alloy Body and Polymer base plate. The magazine holds up to 23 rounds and is a direct replacement for the magazine which comes with the pistol, and is filled with BBs from the top or front, and is filled with gas from the bottom once the base plate has been slid to the front. 

If you're looking to bolster your VORSK G-Series pistol magazine with 100% compatible magazines then this is the way to go. 

Produced by VORSK Airsoft, these Airsoft BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.

These 0.36g BBs are seated well in the middle of the Heavyweight Scale, meaning that they're incredibly precise when used in a well-tuned Rifle. This extra weight helps them stay stable in flight, less affected by the wind, leaves and branches etc, which makes them a great choice for Sniper Rifles and DMRs that need to make sure that every shot hits (and that the hit is called when it does land).

Produced by VORSK Airsoft, these Airsoft BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.

These 0.36g BBs are seated well in the middle of the Heavyweight Scale, meaning that they're incredibly precise when used in a well-tuned Rifle. This extra weight helps them stay stable in flight, less affected by the wind, leaves and branches etc, which makes them a great choice for Sniper Rifles and DMRs that need to make sure that every shot hits (and that the hit is called when it does land).

Produced by VORSK Airsoft, these Airsoft BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.

These 0.36g BBs are seated well in the middle of the Heavyweight Scale, meaning that they're incredibly precise when used in a well-tuned Rifle. This extra weight helps them stay stable in flight, less affected by the wind, leaves and branches etc, which makes them a great choice for Sniper Rifles and DMRs that need to make sure that every shot hits (and that the hit is called when it does land).

Produced by VORSK Airsoft, these Airsoft BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.

These 0.32g BBs are at the lower-end of the Heavyweight Scale, meaning that they're incredibly precise when used in a well-tuned Rifle. This extra weight helps them stay stable in flight, less affected by the wind, leaves and branches etc, which makes them a great choice for Sniper Rifles and DMRs that need to make sure that every shot hits (and that the hit is called when it does land).

Produced by VORSK Airsoft, these Airsoft BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.

These 0.32g BBs are at the lower-end of the Heavyweight Scale, meaning that they're incredibly precise when used in a well-tuned Rifle. This extra weight helps them stay stable in flight, less affected by the wind, leaves and branches etc, which makes them a great choice for Sniper Rifles and DMRs that need to make sure that every shot hits (and that the hit is called when it does land).

Produced by VORSK Airsoft, these Airsoft BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.

These 0.32g BBs are at the lower-end of the Heavyweight Scale, meaning that they're incredibly precise when used in a well-tuned Rifle. This extra weight helps them stay stable in flight, less affected by the wind, leaves and branches etc, which makes them a great choice for Sniper Rifles and DMRs that need to make sure that every shot hits (and that the hit is called when it does land).

If you like your Hi-Capas short and well equipped, the VORSK Hi-Capa 3.8 X Pro GBB Pistol w/Red Dot Sight may be the Hi-Capa for you. This full metal GBB pistol boasts the usual VORSK compliment of pre-upgraded parts, including a flared magazine well, ported slide, extended controls and a 6.03mm tightbore inner barrel for enhanced accuracy and improved gas efficiency.

This is the "BDS" red dot sight equipped variant, giving you a pre-installed red dot sight mounted to the rear of the slide, as is the current convention for combat pistols. The red dot sight provides faster target acquisition and looks fantastic, elevating the looks of the 3.8 X Pro into the elite.

The advantages of a shorter slide, frame and barrel include reduced overall weight, faster cyclic rate thanks to reduced slide rate and a faster draw from a retention holster, shaving off a few precious milliseconds for a seriously fast draw to target execution. If this sounds good to you, the VORSK Hi-Capa 3.8 X Pro GBB Pistol w/Red Dot Sight belongs in your holster!

Produced by VORSK Airsoft, these Airsoft Tracer BIO BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.

These particular BBs are not only BIO BBs, but are also Tracer BBs. These BBs are created with two purposes in mind, being created from biodegradable materials so that they will gradually break down with time when exposed to natural environments as well as being infused with special materials to allow them to glow in the dark. Touted as a more environmentally friendly BB, they are sometimes required by certain Airsoft sites to play.

This weight of BB are designed to work in any Airsoft gun, but perform at their best in beginner and low power Airsoft replicas under 350fps. Whether you're new to Airsoft, playing indoors, or looking for BBs for your Spring Powered Airsoft replica then these are the BBs for you.

An Alloy constructed 23rnd magazine for the Vorsk series of Hi-Capa Gas Blowback Pistols.

In case you haven’t heard, the VMP-2 is VORSKs second long-gun platform designed as a multi-role carbine available in 3 unique variants. This, the VMP-2MD is the “recce rifle” variant, locked to semi-automatic only and tuned to DMR FPS levels. The MD is rocking the same handguard and sliding adjustable stock as the M version with a cheek riser added along with an extended barrel, making it ideal for mobile marksmen playstyles and long-range outdoor warfare!

The VMP-2 is compatible with standard VMP-1/MP9 magazines and makes use of a unique chassis system with QD sling sockets on each side, compatibility with M4/AR-15 GBBR pistol grips and the prolific M4/AR-15 buffer tube at the rear, offering full compatibility with aftermarket AR-15 stocks.

The HOP-up unit is a unique design with an external TDC adjuster, ideal for convenient mid-game setting changes to make the most of changing conditions, not to mention being an inherently accurate design. The HOP-up bucking and inner barrel are also VSR-10 spec, giving you almost unlimited options when it comes to tuning performance to meet your needs.

Our VMP-2 batch has now landed and is ready for immediate dispatch! Those who’ve already made their mind up, get your order in now to make sure you get one of the first VMP-2 platforms available worldwide!

Want to make your VMP-2 magazines look great and far easier to handle? The Magazine Sleeves for VMP-2 GBB Magazines; 2 Pack is just the thing! The magazine cover sleeves are supplied in a pack of 2 covers and are designed to slip over the lower section of the VMP GBB magazine and make them easier to handle in wet and cold weather and fit perfectly with the VMP-2. 

Installation is as simple as slipping the cover over the bottom of the magazine with the baseplate removed, and then reinstalling the baseplate to secure it in place. Please note, with these sleeves on your magazines you will no longer be able to insert them into a VMP-1. 

Want to make your VMP-2 magazines look great and far easier to handle? The Magazine Sleeves for VMP-2 GBB Magazines; 2 Pack is just the thing! The magazine cover sleeves are supplied in a pack of 2 covers and are designed to slip over the lower section of the VMP GBB magazine and make them easier to handle in wet and cold weather and fit perfectly with the VMP-2. 

Installation is as simple as slipping the cover over the bottom of the magazine with the baseplate removed, and then reinstalling the baseplate to secure it in place. Please note, with these sleeves on your magazines you will no longer be able to insert them into a VMP-1. 

Want to make your VMP-2 magazines look great and far easier to handle? The Magazine Sleeves for VMP-2 GBB Magazines; 2 Pack is just the thing! The magazine cover sleeves are supplied in a pack of 2 covers and are designed to slip over the lower section of the VMP GBB magazine and make them easier to handle in wet and cold weather and fit perfectly with the VMP-2. 

Installation is as simple as slipping the cover over the bottom of the magazine with the baseplate removed, and then reinstalling the baseplate to secure it in place. Please note, with these sleeves on your magazines you will no longer be able to insert them into a VMP-1. 

A gas blowback Airsoft magazine developed by VORSK for their G-Series range of pistols, constructed with an Alloy Body and Polymer base plate. The magazine is an extended version of the standard magazine and  holds an impressive 48 rounds and is a direct replacement for the magazine which comes with the pistol, filled with BBs from the top or front, and is filled with gas from the bottom once the base plate has been slid to the front. 

If you're looking to bolster your VORSK G-Series pistol magazine with 100% compatible magazines then this is the way to go. This magazine is also great for those Airsoft skirmishers who believe in accuracy through volume, or CQB players who want to just run around with a spare mag in their hand and go shoot. 

A gas blow back magazine made by VORSK for their 1911 MEU and VX-9 Series of Airsoft Pistols. The magazine is constructed with an alloy body and polymer base plate, and holds up to 36 rounds. The magazine is an extended variant of the magazine which comes with the pistol, and great for those who want the original magazines with a higher capacity to go with the pistol. The magazine is filled with BBs from the front or from the top using an Airsoft speed loader, and filled with gas from the bottom via a standard Airsoft Green Gas bottle. 

If you're looking to bolster your VORSK 1911 MEU or VX-9 pistol magazine collection with 100% compatible magazines then this is the way to go. 

Produced by VORSK Airsoft, these Airsoft BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.

These 0.43g BBs are well within the bracket of Heavyweight BBs, and are ideally suited for Sniper Rifles and other high-power Airsoft Guns such as DMRs and Pistols (provided they have been suitably upgraded with an aftermarket HOP Bucking). If you need more poke from your replica and you have a HOP Bucking that can take it, then 0.43g BBs are a welcome 'upgrade' to your shooting experience.

Produced by VORSK Airsoft, these Airsoft BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.

These 0.43g BBs are well within the bracket of Heavyweight BBs, and are ideally suited for Sniper Rifles and other high-power Airsoft Guns such as DMRs and Pistols (provided they have been suitably upgraded with an aftermarket HOP Bucking). If you need more poke from your replica and you have a HOP Bucking that can take it, then 0.43g BBs are a welcome 'upgrade' to your shooting experience.

Produced by VORSK Airsoft, these Airsoft BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.

These particular BBs are BIO 0.40g BBs which are created from biodegradable materials so that they will gradually break down with time when exposed to natural environments. Touted as a more environmentally friendly BB, they are sometimes required by certain Airsoft sites to play. 

These 0.40g BBs are getting towards the upper limit of Heavyweight BBs, and are ideally suited for Sniper Rifles and other high-power Airsoft Guns such as DMRs and Pistols (provided they have been suitably upgraded with an aftermarket HOP Bucking).

Produced by VORSK Airsoft, these Airsoft BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.

These particular BBs are BIO 0.40g BBs which are created from biodegradable materials so that they will gradually break down with time when exposed to natural environments. Touted as a more environmentally friendly BB, they are sometimes required by certain Airsoft sites to play. 

These 0.40g BBs are getting towards the upper limit of Heavyweight BBs, and are ideally suited for Sniper Rifles and other high-power Airsoft Guns such as DMRs and Pistols (provided they have been suitably upgraded with an aftermarket HOP Bucking).

A gas blow back magazine made by VORSK for their 1911 MEU and VX-9 Series of Airsoft Pistols. The magazine is constructed with an alloy body and polymer base plate, and holds up to 21 rounds. The magazine is a direct replacement of the magazine which comes with the pistol, and great for those who want the original magazines which go with the pistol. The magazine is filled with BBs from the front or from the top using an Airsoft speed loader, and filled with gas from the bottom via a standard Airsoft Green Gas bottle. 

If you're looking to bolster your VORSK 1911 MEU or VX-9 pistol magazine collection with 100% compatible magazines then this is the way to go. 

Produced by VORSK Airsoft, these Airsoft BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.

These 0.40g BBs are getting towards the upper limit of Heavyweight BBs, and are ideally suited for Sniper Rifles and other high-power Airsoft Guns such as DMRs and Pistols (provided they have been suitably upgraded with an aftermarket HOP Bucking).

Produced by VORSK Airsoft, these Airsoft BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.

These 0.40g BBs are getting towards the upper limit of Heavyweight BBs, and are ideally suited for Sniper Rifles and other high-power Airsoft Guns such as DMRs and Pistols (provided they have been suitably upgraded with an aftermarket HOP Bucking).