VORSK VMP Series

If your pistol isn't cutting it, perhaps you need a bigger sidearm! Enter the VORSK VMP-1C, the compact variant of the VMP-1 gas blowback SMG. The VMP-1C takes the original and deletes the stock and muzzle device for a more compact form ideally suited to CQB and use as a sniper or support gunner's backup platform.

Like the original, the VMP-1C is constructed almost entirely from high density polymer with an alloy outer barrel and steel trim parts, giving you a lightweight, bite-sized platform with a full-size punch. Inside, the platform boasts a 6.03mm tightbore inner barrel for an edge in accuracy, despite its short barrel length. The stunning rate of fire of the original has been maintained, making this lil SMG great for laying down covering fire as you relocate to a more advantageous firing position. If you need a secondary with more firepower than the average, the VMP-1C is ideal for your needs!

If you're running the VMP-2D or VMP-2MD and want to tune muzzle energy, the VORSK Replacement Nozzle for VMP-2D & VMP-2MD is what you need! Available in a range of power levels, including 300 FPS, 330 FPS, 430 FPS and 450 FPS, these nozzles are colour coded so you can tune to perfection without the confusion.

While these nozzles are compatible with all VMP-2 variants, the stated power level only applies to the VMP-2MD and VMP-2D barrel lengths. Muzzle energy will be slightly higher with longer barrel lengths and slightly lower with shorter barrel lengths, so please keep this in mind. The nozzle spring is also pre-installed in each nozzle to make installation that bit easier. If you're the type to take full advantage of your VMP-2's modularity, the VORSK Replacement Nozzle for VMP-2D & VMP-2MD was made with you in mind!

If you're running the VMP-2D or VMP-2MD and want to tune muzzle energy, the VORSK Replacement Nozzle for VMP-2D & VMP-2MD is what you need! Available in a range of power levels, including 300 FPS, 330 FPS, 430 FPS and 450 FPS, these nozzles are colour coded so you can tune to perfection without the confusion.

While these nozzles are compatible with all VMP-2 variants, the stated power level only applies to the VMP-2MD and VMP-2D barrel lengths. Muzzle energy will be slightly higher with longer barrel lengths and slightly lower with shorter barrel lengths, so please keep this in mind. The nozzle spring is also pre-installed in each nozzle to make installation that bit easier. If you're the type to take full advantage of your VMP-2's modularity, the VORSK Replacement Nozzle for VMP-2D & VMP-2MD was made with you in mind!

If you're running the VMP-2D or VMP-2MD and want to tune muzzle energy, the VORSK Replacement Nozzle for VMP-2D & VMP-2MD is what you need! Available in a range of power levels, including 300 FPS, 330 FPS, 430 FPS and 450 FPS, these nozzles are colour coded so you can tune to perfection without the confusion.

While these nozzles are compatible with all VMP-2 variants, the stated power level only applies to the VMP-2MD and VMP-2D barrel lengths. Muzzle energy will be slightly higher with longer barrel lengths and slightly lower with shorter barrel lengths, so please keep this in mind. The nozzle spring is also pre-installed in each nozzle to make installation that bit easier. If you're the type to take full advantage of your VMP-2's modularity, the VORSK Replacement Nozzle for VMP-2D & VMP-2MD was made with you in mind!

If you're running the VMP-2D or VMP-2MD and want to tune muzzle energy, the VORSK Replacement Nozzle for VMP-2D & VMP-2MD is what you need! Available in a range of power levels, including 300 FPS, 330 FPS, 430 FPS and 450 FPS, these nozzles are colour coded so you can tune to perfection without the confusion.

While these nozzles are compatible with all VMP-2 variants, the stated power level only applies to the VMP-2MD and VMP-2D barrel lengths. Muzzle energy will be slightly higher with longer barrel lengths and slightly lower with shorter barrel lengths, so please keep this in mind. The nozzle spring is also pre-installed in each nozzle to make installation that bit easier. If you're the type to take full advantage of your VMP-2's modularity, the VORSK Replacement Nozzle for VMP-2D & VMP-2MD was made with you in mind!

If you're running the VMP-2M and want to tune it to DMR power levels, the VORSK Replacement Nozzle for VMP-2M is what you need! Available in a range of power levels, including 300 FPS, 330 FPS, 430 FPS and 450 FPS, these nozzles are colour coded so you can tune to perfection without the confusion.

While these nozzles are compatible with all VMP-2 variants, the stated power level only applies to the VMP-2M barrel length. Muzzle energy will be slightly higher with longer barrel lengths, so please keep this in mind. The nozzle spring is also pre-installed in each nozzle to make installation that bit easier. If you're the type to take full advantage of your VMP-2's modularity, the VORSK Replacement Nozzle for VMP-2M was made with you in mind!

If you're running the VMP-2M and want to tune it to DMR power levels, the VORSK Replacement Nozzle for VMP-2M is what you need! Available in a range of power levels, including 300 FPS, 330 FPS, 430 FPS and 450 FPS, these nozzles are colour coded so you can tune to perfection without the confusion.

While these nozzles are compatible with all VMP-2 variants, the stated power level only applies to the VMP-2M barrel length. Muzzle energy will be slightly higher with longer barrel lengths, so please keep this in mind. The nozzle spring is also pre-installed in each nozzle to make installation that bit easier. If you're the type to take full advantage of your VMP-2's modularity, the VORSK Replacement Nozzle for VMP-2M was made with you in mind!

If you're running the VMP-2M and want to tune it to DMR power levels, the VORSK Replacement Nozzle for VMP-2M is what you need! Available in a range of power levels, including 300 FPS, 330 FPS, 430 FPS and 450 FPS, these nozzles are colour coded so you can tune to perfection without the confusion.

While these nozzles are compatible with all VMP-2 variants, the stated power level only applies to the VMP-2M barrel length. Muzzle energy will be slightly higher with longer barrel lengths, so please keep this in mind. The nozzle spring is also pre-installed in each nozzle to make installation that bit easier. If you're the type to take full advantage of your VMP-2's modularity, the VORSK Replacement Nozzle for VMP-2M was made with you in mind!

If you're running the VMP-2M and want to tune it to DMR power levels, the VORSK Replacement Nozzle for VMP-2M is what you need! Available in a range of power levels, including 300 FPS, 330 FPS, 430 FPS and 450 FPS, these nozzles are colour coded so you can tune to perfection without the confusion.

While these nozzles are compatible with all VMP-2 variants, the stated power level only applies to the VMP-2M barrel length. Muzzle energy will be slightly higher with longer barrel lengths, so please keep this in mind. The nozzle spring is also pre-installed in each nozzle to make installation that bit easier. If you're the type to take full advantage of your VMP-2's modularity, the VORSK Replacement Nozzle for VMP-2M was made with you in mind!

If you want to take pure advantage of the inherent modularity of the VORSK VMP-2, these Complete Trigger Groups are the key! Available in semi-auto only for DMR builds or select fire (semi/full auto) for assault rifle setups, the VORSK Complete Trigger Group for VMP-2 Series is constructed from alloy with steel springs, pins and screws.

If you're rocking the VMP-2D or VMP-2MD, the select fire version will allow you to convert your DMR into an assault rifle, though you'll also need a low power nozzle to keep your build site legal. Installing the semi-auto only version in the VMP-2M will lock it to semi-auto, allowing you to pop a high power nozzle inside and run it as a compact DMR!

Each trigger group comes pre-built and equipped with ambidextrous fire controls, making it an almost literal "drop in" installation. No need to fiddle with small springs and awkward little screws installing these! Despite the super easy installation, any internal modification made will void the VMP-2's original 12-month warranty so we only recommend these for the pros!

If you want to take pure advantage of the inherent modularity of the VORSK VMP-2, these Complete Trigger Groups are the key! Available in semi-auto only for DMR builds or select fire (semi/full auto) for assault rifle setups, the VORSK Complete Trigger Group for VMP-2 Series is constructed from alloy with steel springs, pins and screws.

If you're rocking the VMP-2D or VMP-2MD, the select fire version will allow you to convert your DMR into an assault rifle, though you'll also need a low power nozzle to keep your build site legal. Installing the semi-auto only version in the VMP-2M will lock it to semi-auto, allowing you to pop a high power nozzle inside and run it as a compact DMR!

Each trigger group comes pre-built and equipped with ambidextrous fire controls, making it an almost literal "drop in" installation. No need to fiddle with small springs and awkward little screws installing these! Despite the super easy installation, any internal modification made will void the VMP-2's original 12-month warranty so we only recommend these for the pros!

The VMP-1X is VORSK's first foray into GBB submachine guns and is built on the foundation of VORSK’s expertise in producing some of the best affordable GBB platforms on the market today. The VMP-1X makes use of the control layout of the MP9 platform but with an entirely new external style, complete with a side folding stock/brace setup and a unique QD suppressor and mounting system built into the muzzle itself. Our VMP-1X SMGs have now arrived and are ready for dispatch, no need to hold your breath any longer!

If you need something mightier than a pistol but more compact than a rifle, the VORSK VMP-1X is the perfect happy medium and promises to be a serious beast in the hands of CQB specialists and snipers looking for a sidearm with extra firepower!

Want to make your VMP-1 SMG magazines look great and far easier to handle? The VMP-1 GBB SMG Magazine cover is just the thing! The magazine cover sleeves are supplied in a pack of 2 covers and is designed to slip over the lower section of the VMP-1 magazine and make them easier to handle in wet and cold weather. Making the magazine look more in keeping with the cutting-edge external design of the VMP-1 itself is just a bonus! Installation is as simple as slipping the cover over the bottom of the magazine with the baseplate removed, and then reinstalling the baseplate to secure it in place.

If you've been working with an improvised sling solution for your VMP-1, time to get professional! The VORSK Sling Plate for VMP-1 GBB SMGs is constructed from steel, mounting between the stock and receiver at the ideal spot for a single-point sling. The plate includes a keyring extension for more flexibility but this can be removed entirely if not needed or replaced with a loop of paracord for a stealthier alternative. 

When installed, the sling loop is centrally positioned below the stock, granting it ambidextrous functionality, great for left or right-handed shooters. Its steel construction guarantees it can take the weight of whatever you've mounted to your VMP-1, giving you a sling solution which is both reliable and looks professional. Compatibility-wise, this plate will work with both the original VMP-1 and VMP-1X but isn't compatible with the VMP-1C. 

If you're into the excitement and immersive experience of a GBB primary and need a CQB optimised platform, the VORSK VMP-2C Compact GBB SMG is one to watch. The smallest member of the VORSK VMP-2 line, the Compact is designed for cutting tight corners up close and also makes a killer backup platform to cover VMP-2D DMR users when the enemy gets too close!

Part of the VORSK Modular Platform ecosystem, the VMP-2C offers a wide range of customisation options, from quick-swap trigger groups to different power nozzles and alternative external parts, allowing you to make the VMP-2C truly yours with a custom touch. The 6.03mm tightbore inner barrel and HOP-up bucking are GBB/VSR spec, giving you access to the best of the best when it comes to accuracy and range upgrades.

On the outside, the VMP-2C reminds us of the iconic TEC-9 SMG reinvented for the 21st century, equipped with a 14mm CCW male threaded barrel, M4/AR-15 GBBR compatible pistol grip and 1913/20mm Picatinny stock interface at the rear, ready for the most modern stocks out there. If you're after a loud, violent and super-fun CQB platform which will never encounter a corner too tight to handle, the VORSK VMP-2C Compact GBB SMG should be your next platform!

If you like the VMP-2 look but are more of a CQB player, the VMP-2S was designed with you in mind! Bringing the uniquely lightweight and agile VMP-2 design to the close-quarters role, the VMP-2S is a shortened version of the VMP-2M, ideally suited to fast-moving playstyles and close to mid-range engagements.

Part of the VORSK Modular Platform ecosystem, the VMP-2S offers a wide range of customisation options, from quick-swap trigger groups to different power nozzles and alternative external parts, allowing you to make the VMP-2S truly yours with a custom touch. The 6.03mm tightbore inner barrel and HOP-up bucking are GBB/VSR spec, giving you access to the best of the best when it comes to accuracy and range upgrades.

Externally, the VMP-2S is ready to rock with an M-LOK handguard, 20mm Picatinny railed receiver, VORSK 5-Lug QD flash hider, 14mm CCW male threaded barrel and 1913/20mm Picatinny interface at the rear equipped with the VMP-1 side folding stock. With plenty of customisation options built in, immersive recoil and loads of performance potential, the VORSK VMP-2S Short GBB SMG is ready when you are!

If you're a fan of the VMP-2 but prefer a stealthy aesthetic, the VMP-2SD Suppressed GBB SMG is the one for you! An integrally suppressed version of the compact VMP-2S, the VMP-2SD is rocking the  "Honey Badger" vibe with its menacing integrally suppressed front end and square profile M-LOK handguard, ideal for sneaky skirmishers who aren't afraid to try something new.

Part of the VORSK Modular Platform ecosystem, the VMP-2SD offers a wide range of customisation options, from quick-swap trigger groups to different power nozzles and alternative external parts, allowing you to make the VMP-2SD truly yours with a custom touch. The 6.03mm tightbore inner barrel and HOP-up bucking are GBB/VSR spec, giving you access to the best of the best when it comes to accuracy and range upgrades.

Externally equipped with the ultra-modern 1913/20mm Picatinny stock interface, an aluminium skeleton side folding stock, ambidextrous fire controls, and a 20mm Picatinny railed receiver, the VMP-2SD is ready to be customised to suit your liking. If you're the silent type seeking GBB recoil, realism and immersion, the VORSK VMP-2SD Suppressed GBB SMG is your ideal primary!