Airsoft Electric Gun Magazines

EMG have teamed up with Lancer Systems to bring you a fully trademarked and licensed .300 blackout style magazine to give your Airsoft M4 some serious style points. The mag features an ultra modern aesthetic with the following trademarks:

• '.300 BLACKOUT'
• 'L5-AWA'
• 30BLK
• LANCER SYSTEMS
• 20 / 30

The mag is a mid cap that holds 190 rounds, which is a very large capacity for a mag of this type and features no 'battle rattle unlike high-cap magazines. The mag is constructed from translucent polymer, revealing the mock cartridges within for additional realism. Gripping the mag is no issue thanks to the raised stippled texture and grid pattern to make reloading as quick and easy as possible.

EMG have teamed up with Lancer Systems to bring you a fully trademarked and licensed .300 blackout style magazine to give your Airsoft M4 some serious style points. The mag features an ultra modern aesthetic with the following trademarks:

• '.300 BLACKOUT'
• 'L5-AWA'
• 30BLK
• LANCER SYSTEMS
• 20 / 30

The mag is a mid cap that holds 190 rounds, which is a very large capacity for a mag of this type and features no 'battle rattle unlike high-cap magazines. The mag is constructed from translucent polymer, revealing the mock cartridges within for additional realism. Gripping the mag is no issue thanks to the raised stippled texture and grid pattern to make reloading as quick and easy as possible.

EMG has teamed up with Lancer Systems to bring you a fully trademarked and licensed 5.56x45mm style magazine to give your Airsoft M4 AEG some serious style points! The mag features an ultra-modern aesthetic with the following trademarks:

• '5.56x45mm'
• 'L5-AWA'
• 30BLK
• LANCER SYSTEMS
• 20 / 30

The mag is a mid-cap that holds 190 rounds, which is a very large capacity for a mag of this type and features no 'battle rattle unlike high-cap magazines. The mag is constructed from a translucent polymer, revealing the mock cartridges within for additional realism. Gripping the mag is no issue thanks to the raised stippled texture and grid pattern to make reloading as quick and easy as possible. As with other mid-cap mags, a speed loader or loading tool is required to load the mag and loading is carried out through the fill/feed port at the top of the magazine body. If you're working on a 5.56x45mm-themed build and need modern magazines, these are perfect!

If you are rocking the FN Herstal licensed SCAR-H AEG from Cybergun then you will need some iconic mags to go with it! The Cybergun 500rnd High Capacity magazine is intended for the Cybergun FN Herstal SCAR-H AEG (VFC OEM) and is a wheel wound high-capacity magazine. The wheel is located at the bottom of the magazine, and the fill window is on the top. All you need to do to ready this mag for battle is fill it up with BBs through the fill window, then wind the magazine using the wheel on the base plate.

This magazine has a steel shell and polymer internals, giving it a realistic feel and high strength. It comes in both tan and black so you can match it to the colour of your Scar-H and it won't stick out like a sore thumb! Compatibility-wise, this magazine is specifically for the VFC-manufactured Cybergun SCAR-H AEG and won't fit the Ares-made versions.

If you are rocking the FN Herstal licensed SCAR-H AEG from Cybergun then you will need some iconic mags to go with it! The Cybergun 500rnd High Capacity magazine is intended for the Cybergun FN Herstal SCAR-H AEG (VFC OEM) and is a wheel wound high-capacity magazine. The wheel is located at the bottom of the magazine, and the fill window is on the top. All you need to do to ready this mag for battle is fill it up with BBs through the fill window, then wind the magazine using the wheel on the base plate.

This magazine has a steel shell and polymer internals, giving it a realistic feel and high strength. It comes in both tan and black so you can match it to the colour of your Scar-H and it won't stick out like a sore thumb! Compatibility-wise, this magazine is specifically for the VFC-manufactured Cybergun SCAR-H AEG and won't fit the Ares-made versions.

If you have an ARCTURUS AK in your arsenal and need some spare magazines for the battlefield, look no further! The ARCTURUS 30/130 Adjustable Mid-Cap for ARCTURUS AK Platforms is constructed from high-density polymer with a steel feed spring, designed to match the style of the real steel AK-12 5.45x39mm magazine.

On either side of the magazine, we have a grippy, ribbed design and mock witness windows designed to check rounds remaining in its real steel counterpart. The steel baseplate is also angled to allow for "mag-podding". Compatibility-wise, this mag will work with ARCTURUS AK AEGS; other brands' compatibility cannot be guaranteed.

The magazine's capacity can be adjusted from a real capacity of 30 to a more fitting capacity for Airsoft, of 130 rounds. To adjust it, remove the magazine from the shell, and there is a switch that can be moved, one side for 30 rounds and one side for 130 rounds.

This polymer P90 magazine is compatible with any TM-based P90 AEG, including brands like CYMA and Novritsch. It has a translucent brown design with mock bullets visible through it, giving your SMG an extra sense of realism as you charge through the Airsoft site.

The sturdy steel feed spring makes this a mighty fine magazine that will last you a long time. This magazine can hold approximately 70 BBs, not a large amount for full auto spraying and praying, but more than enough for a game of CQB, so long as you aren't too trigger happy...

If you're rocking an MG 26(T) for that extra retro vibe on the battlefield, you'll need some of these to keep it fed! The Snow Wolf 110rnd Mid-Cap Magazine is specifically designed for the Snow Wolf MG 26(T) Light Machine Gun Replica AEG and is constructed with a steel shell, polymer internals and a steel feed spring.

Like other Airsoft mid-caps, this mag is loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod. Replicating the real steel MG 26(T)  magazine, these mags are rather massive. Due to their unique size and design, you'll need to find an appropriately sized magazine pouch to fit them!

If you have an ARCTURUS AK in your arsenal and are tired of constantly having to reload after every fight, you need this! The ARCTURUS 550rnd Hi-Cap Magazine for ARCTURUS AK Platforms is constructed from high-density polymer with a steel feed spring, designed to match the style of the real steel AK-12 5.45x39mm magazine. Simply fill it with BBs at the fill window on top of the magazine and spin the wheel on the bottom to load the BBs.

On either side of the magazine, we have a grippy, ribbed design and mock witness windows designed to check rounds remaining in its real steel counterpart. The steel baseplate is also angled to allow for "mag-podding". Compatibility-wise, this mag will work with ARCTURUS AK AEGS; other brands' compatibility cannot be guaranteed.

If you're looking for spare magazines for your ARCTURUS X C.A.T. PCC SMG, you have found them! The ARCTURUS 60rnd Mid-Cap Magazine for X C.A.T. PCC is constructed from high-density polymer with a steel feed spring and is designed to keep up with the high-rate-of-fire that the FE™ MOSFET provides.

The magazine can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod and holds 60bbs with no battle rattle whatsoever. The bottom of the magazine has a loop to provide extra grip when pulling the magazine from a pouch. If you have treated yourself to an ARCTURUS X C.A.T. PCC series SMG, you need some of these to keep it well fed!

If you're looking for spare magazines for your ARCTURUS X C.A.T. PCC SMG, you have found them! The ARCTURUS 105rnd Mid-Cap Magazine for X C.A.T. PCC is constructed from high-density polymer with a steel feed spring and is designed to keep up with the high-rate-of-fire that the FE™ MOSFET provides.

The magazine can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod and holds 105bbs with no battle rattle whatsoever. The bottom of the magazine has a loop to provide extra grip when pulling the magazine from a pouch. If you have treated yourself to an ARCTURUS X C.A.T. PCC series SMG, you need some of these to keep it well fed!

If you need more mags to keep your beastly Barrett in the battle, here you go! The Snow Wolf 100rnd Mid-Cap Magazine for EMG Barrett M82A1 AEG is compatible with the Snow Wolf/EMG M82 and M107 Barrett AEGs but won't work with the spring-powered versions. The mid-cap mag features an alloy shell and polymer internals with a steel feed spring, and thankfully, it isn't as heavy as a real Barrett mag!

This magazine can be loaded with BBs through the fill/feed port on the top using a speed loader or loading tool. Being a mid-cap, the BBs are fed using spring pressure, which means no high-cap style battle rattle to give you away as you stalk through the woods. If you're hitting the field with a Barrett AEG, one of Airsoft's mightiest platforms, the Snow Wolf 100rnd Mid-Cap Magazine for EMG Barrett M82A1 AEG is essential!

Whether you use a Specna Arms M4/AR-15 AEG or need affordable M4 mid-caps to expand your firepower, the 125rnd S-Mag Mid-cap is what you need. This magazine is constructed from high-density polymer with a steel feed spring and is loaded through the fill/feed port at the top of the magazine body, just like other mid-caps.

The S-Mag is compatible with the vast majority of M4/AR-15 AEGs and should also fit most 416, SCAR-L and L85 AEG replicas. Being a mid-cap, this magazine won't give you away with the dreaded battle rattle as you run and is ideal for sneaky skirmishers looking for more capacity!

If you need to load up on M4/AR-15 mid-caps, the Specna Arms 125rnd S-Mag Mid-Cap Magazine for M4/AR-15 AEG; Set Of 5 is ideal! This great value magazine multipack includes 5 S-Mag Mid-caps holding 125 BBs each, loaded through the fill/feed port at the top of the mag body using a speed loader, as with other mid-caps.

The S-Mag boasts a uniquely modern design, patterned after popular real steel polymer magazines with SA texture on each side to improve grip and wet weather handling. These magazines are known for their robust nature, wide compatibility and low weight and should fit and feed in almost any M4/AR-15 AEG out there, along with other compatible platforms such as 416 AEGs, SCAR-L AEGs and L85 AEGs. If you want to load up on mid-caps in one go, this is one of the best (and most affordable) ways to do it!

If you need affordable Mid-cap magazines for your M4/AR-15 AEG you're going to want to check this out! The Delta Armory 120rnd DMAG Mid-cap Magazine is designed to fit M4/AR-15 AEGs and is styled after a well-known polymer real steel magazine, complete with waffle-style gripping texture.

The magazine is loaded just like any other Airsoft mid-cap, through the fill/feed port at the top of the magazine body using a speed loader or loading tool. The magazine is also marked on either side with the capacity (120) and the Delta Armory logo. If you need cheap M4 mags to complete your loadout, this is as cheap as they come!

If you need affordable Mid-cap magazines for your M4/AR-15 AEG you're going to want to check this out! The Delta Armory 120rnd DMAG Mid-cap Magazine is designed to fit M4/AR-15 AEGs and is styled after a well-known polymer real steel magazine, complete with waffle-style gripping texture.

The magazine is loaded just like any other Airsoft mid-cap, through the fill/feed port at the top of the magazine body using a speed loader or loading tool. The magazine is also marked on either side with the capacity (120) and the Delta Armory logo. If you need cheap M4 mags to complete your loadout, this is as cheap as they come!

The world's best Airsoft Magazine just got better! Made to a seriously tough standard using excellent materials, the EPM-1 Magazine holds a massive 250rnds in a Spring-Fed Mid-Cap design. This means that you still get the incredible feeding performance of a PTS Mid-Cap, but with a capacity that can rival most High-Cap Magazines!

If you are loading up on magazines and you want to avoid the battle rattle of a loadout full of high-cap mags, mid-caps are the best solution! These mid-cap magazines from CYMA hold 150 rounds, and can be loaded through the fill/feed port at the top of the magazine using a standard Airsoft speed loader. The magazine is constructed with a steel shell and feed spring, with polymer internals. The exterior design of this magazine matches the widely issued NATO STANAG magazine type and will fit in with any M4/AR15 loadout from practically any time period or military organisation. This magazine is compatible with the vast majority of M4/AR15 AEG rifles, and has the added bonus of a slightly higher capacity than the average mid-cap!

If you are loading up on magazines and you want to avoid the battle rattle of a loadout full of high-cap mags, mid-caps are the best solution! These mid-cap magazines from CYMA hold 150 rounds, and can be loaded through the fill/feed port at the top of the magazine using a standard Airsoft speed loader. The magazine is constructed with a steel shell and feed spring, with polymer internals. The exterior design of this magazine matches the widely issued NATO STANAG magazine type and will fit in with any M4/AR15 loadout from practically any time period or military organisation. This magazine is compatible with the vast majority of M4/AR15 AEG rifles, and has the added bonus of a slightly higher capacity than the average mid-cap!

A STANAG type magazine which is designed to fit any Airsoft AEG rifle which accepts this style of magazine, such as M4, L85, 416, SCAR-L and more.

This magazine is the perfect purchase for any Airsoft skirmisher due to its low price and high quality, with the added bonus that should you one day visit a low-cap only site it can be quickly changed to suit your needs.

An Alloy construction Mid-Cap Magazine for SMG-5 Airsoft Electric Guns which is filled from the top using an Airsoft  Speedloader, and feeds BBs into your replica until empty, with no rattle. It is compatible with a wide range of brands and holds a total of 130rnds. 

A 130rnd Mid-Cap Magazine for SMG-5 Platform Airsoft Guns, fitting CYMA, Classic Army, SRC, JG and Tokyo Marui standard replicas. This modern-style Magazine is reminiscent of the 'P-Mag' style design, and features Mock Bullets / Dummy Ammunition visible through a window on the side of the Magazine. Whether you run a modern SMG-5 loadout, or you want to add a tactical 'touch' to your Airsoft Gun, then the CYMA 130rnd Polymer SMG5/SMG5K Magazine is perfect for the task.

A multi-pack of five High Cap Magazines for AR/M4/M16 Platform Airsoft Replicas. These Magazines are 'S-MAG' type Magazines which are usually included with Specna Arms Airsoft Guns, but in a gorgeous grey colour. They are High Cap Magazines that hold 380rnds each, filled by pouring BBs through the top fill window, and wound at the clockwork wheel on the base.

Whether you're new to Airsoft or you have recently picked up an AR/M4 style Airsoft Gun and want a bulk of Magazines to go with it, this is a great way to get stocked up on necessities.

A multi-pack of five High Cap Magazines for AR/M4/M16 Platform Airsoft Replicas. These Magazines are 'S-MAG' type Magazines which are usually included with Specna Arms Airsoft Guns, but in a gorgeous grey colour. They are High Cap Magazines that hold 380rnds each, filled by pouring BBs through the top fill window, and wound at the clockwork wheel on the base.

Whether you're new to Airsoft or you have recently picked up an AR/M4 style Airsoft Gun and want a bulk of Magazines to go with it, this is a great way to get stocked up on necessities.

A multi-pack of five High Cap Magazines for AR/M4/M16 Platform Airsoft Replicas. These Magazines are 'S-MAG' type Magazines which are usually included with Specna Arms Airsoft Guns, but in a gorgeous grey colour. They are High Cap Magazines that hold 380rnds each, filled by pouring BBs through the top fill window, and wound at the clockwork wheel on the base.

Whether you're new to Airsoft or you have recently picked up an AR/M4 style Airsoft Gun and want a bulk of Magazines to go with it, this is a great way to get stocked up on necessities.

If you are looking for M4/AR-15 AEG magazines that are a cut above the rest, the PTS Syndicate 150rnd EPM Gen.2 Enhanced Polymer Magazine is the one to go for! This is the Gen.2 version of the EPM, building on the superb design of the original by adding improved gripping texture on the exterior, compatibility with Magpul MAGLINK® magazine couplers and a new, more rigid Zytel polymer baseplate.

Like the usual mid-cap magazine, the EPM Gen.2 is loaded through the fill/feed port at the top using an Airsoft speed loader or loading rod/tool and has no battle rattle whatsoever, making it great for milsim inclined skirmishers and those who prioritise stealth when skirmishing. All of the enhancements from the original EPM design have been retained, including the magazine well guides at the top of the shell which eliminate wobble, the witness window showcasing mock cartridges with a clear section to confirm the mag is fully loaded and the high visibility orange follower so you can confirm when your mag is empty.

With a wide range of compatibility, a high-strength compression spring and Dupont Zytel polymer construction, you would be hard pressed to find a better magazine for M4/AR-15 AEG compatible platforms!

Looking for AK74 magazines for a modern loadout? The 150rnd Mid-cap from CYMA is constructed from polymer with a steel feed spring and baseplate and is patterned after more modern polymer magazines issued with AK74 and AK105 rifles in Russian service and civilian use. For a modern AK74/105 loadout this magazine is perfect. This is a spring loaded mid-cap magazine and can be loaded through the fill/feed port at the top of the magazine body, using either a speed loader or a loading rod/tool. The advantage of mid-cap magazines is that they do not rattle, and can be an asset to a sneaky player who wants to move fast and still get the drop on the enemy team. This magazine is a 5.45x39 style magazine and is most appropriate for an AK74, AK105 or AKS74U AEG but will fit and feed in most AK platform AEGs.

Having a high-cap magazine handy may ruin your discrete advance with a bit of "battle rattle", but nothing beats the absolute storm of fire you can lay down with one of these on your AEG! The 320rnd Steel High-cap Magazine from CYMA is patterned after the real M4/AR15 STANAG magazine, with a steel shell and realistic reinforcement ribs on the outside. This magazine is a wheel wound high-cap mag, and the winding wheel can be found on the baseplate, and the fill window is located on the top of the magazine. This mag is compatible with any standard M4/AR15 AEG rifle, as well as L85 AEG rifles, 416 series AEGs and SCAR-L AEGs.

If you have treated yourself to the phenomenal new SMG from Double Eagle, the UTR45, you will want to stock up on these! This 120rnd AEG magazine is compatible with the UTR45 and is loaded using a standard speed loader or loading rod through the feed/fill port at the top of the magazine. 

A Mid-Capacity Magazine for AR Platform Rifles (such as AR-15, SCAR, TAVOR, ARX100), that is filled using a Speedloader to fill BBs through the top of the Mag. It will then quietly and effectively feed BBs into your Gun until empty, with no rattle unlike High-Cap Magazines. With an attractive hex pattern, this is an eye-catching Magazine that looks great in any AR Platform Airsoft Gun. Not only this, but it is compatible with Tokyo Marui (TM) Replicas too.