All Airsoft Assault Rifles

If you're searching for a 416-style AEG with pre-upgraded internals which won't hinder your mobility, hit the field with the Evolution E-416 CQB Carbontech™ AEG; ETS II ETU! Superbly built with a Carbontech engineering polymer receiver, alloy outer barrel and CNC aluminium handguard and buffer tube, the E-416 is inspired by one of the most prolific rifles serving with special forces units worldwide, from the SAS to Japanese SFGp and US Navy SEALs, along with many, many more!

Inside, the E-416 CQB is well-equipped, featuring a TM-spec V2 gearbox with 18:1 steel gears running on 8mm oil-less steel bushings, a polymer piston with a steel tooth rack, a quick-change spring guide, and a sector gear delayer to maintain reliable feeding at high speeds. Also inside is a 6.01mm tightbore inner barrel, which boosts air efficiency and accuracy along with the ETS II programmable MOSFET/ETU, offering a wealth of programmable fire mode options while keeping your gearbox running at maximum efficiency.

If you're working on a special forces-inspired loadout and need a primary with the elite look, the Evolution E-416 CQB Carbontech™ AEG; ETS II ETU is a fine choice. A solid build, which isn't too heavy, packed with pre-upgraded internals, the E-416 is ready to be dressed up special forces style!

If you're after a beginner-friendly M4/AR-15 AEG with a cutting-edge aesthetic, the Delta Armory DA-C08 CHARLIE™ 8" M-LOK M4/AR-15 AEG is one to watch. Made from high density polymer with an alloy outer barrel, this build is super light and agile, fantastic for younger players with limited physical strength, though the lightweight build does not necessarily mean compromise!

On the outside, the DA-C08 is rocking an M-LOK handguard with 20mm rail sections pre-installed and a 20mm Picatinny railed receiver, ready for a red dot sight, scope or any other accessory you choose to mount. The outer barrel is threaded to 14mm CCW, meaning common suppressors and tracer units will mount with minimal fuss. Internally, things are equally impressive!

The DA-C08 is based around the common V2 gearbox with an alloy shell, 18:1 ratio steel gears running on 8mm bushings and a reinforced SHS tappet plate and piston with a full steel tooth rack. The inner barrel is a 6.03mm tightbore paired with a rotary HOP-up, giving you the kit you need to get good effect on targets downrange. With a compact CQB-friendly form, pre-upgraded internals and full aftermarket compatibility, the DA-C08 CHARLIE™ from Delta Armory is a fantastic starter AEG or base for a custom build!

Sneaky skirmishers, check this out! The Specna Arms SA-C11 CORE™ HAL¹ ETU™ M4/AR-15 AEG is the perfect close-quarters combat AEG, made better than ever in its latest gen.2 form. Featuring a pre-installed suppressor, CNC aluminium handguard and polymer receiver, this Airsoft replica is the perfect companion for those who want to stay light on their feet. Its affordable price point and advanced programmable MOSFET make it an attractive platform for players of any skill level!

Specna's CORE™ Gen.2 pushes the featureset of affordable AEGs up a notch or two, equipped with the Aether™ enhanced gearbox shell and Magnus™ TDC Rotary HOP-up unit from the PRIME™ series. Also on board is the Aether™ CNC aluminium nozzle and Helium™ HOP-up bucking, boosting accuracy and range considerably. The HAL programmable ETU is the icing on the cake, offering a wide range of programmable fire modes, from 3-round burst to binary trigger, semi-auto only and much, much more!

Like the original SA-C11, the Gen.2 version also has a polymer piston with a full steel tooth rack, ESA quick change spring system for easy power tuning and a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for an entry-level price point!

Sneaky skirmishers, check this out! The Specna Arms SA-C11 CORE™ HAL¹ ETU™ M4/AR-15 AEG is the perfect close-quarters combat AEG, made better than ever in its latest gen.2 form. Featuring a pre-installed suppressor, CNC aluminium handguard and polymer receiver, this Airsoft replica is the perfect companion for those who want to stay light on their feet. Its affordable price point and advanced programmable MOSFET make it an attractive platform for players of any skill level!

Specna's CORE™ Gen.2 pushes the featureset of affordable AEGs up a notch or two, equipped with the Aether™ enhanced gearbox shell and Magnus™ TDC Rotary HOP-up unit from the PRIME™ series. Also on board is the Aether™ CNC aluminium nozzle and Helium™ HOP-up bucking, boosting accuracy and range considerably. The HAL programmable ETU is the icing on the cake, offering a wide range of programmable fire modes, from 3-round burst to binary trigger, semi-auto only and much, much more!

Like the original SA-C11, the Gen.2 version also has a polymer piston with a full steel tooth rack, ESA quick change spring system for easy power tuning and a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for an entry-level price point!

If you love head-turning AEGs with incredible build quality, the LCT AK MOE AEG has your name on it! An almost entirely steel build with a gorgeous real wood handguard, the AK MOE is one-of-a-kind, a menacing mini AK capable of feeding from LCT PP-19-01 mags or full-fat AK mags. Whether you run it as a massive pistol in its default configuration or add a 1913/20mm Picatinny stock to serve as a mean little subgun, the smile will not leave your face running the AK MOE!

Inside, the AK MOE is equipped with a version 3 gearbox with TM-compatible internals, ready for a wide range of aftermarket upgrades. Pre-installed, we have a polycarbonate piston with a full steel tooth rack, a chrome-plated brass cylinder, steel ball bearing spring guide and 18:1 steel gears running on 9mm steel bushings. Also inside is 18AWG wiring for superb electrical efficiency, a quick-change spring system for easy power tuning, a 22K RPM motor and LCT's latest AK rotary HOP-up design.

If you've never handled an LCT AK before, you're in for a real treat! Hefty, thick stamped and milled steel throughout, a flawless, hardwearing finish, practically no mag wobble or play between parts and contrasting colour tones across the design which make LCT AKs indistinguishable from the real thing, even up close. If you have an unconventional loadout planned or appreciate a unique build based on radical US Civilian builds, the AK MOE from LCT is the mould-breaking AEG you need!

If you're a fan of the US Army M4A1 look, the Specna Arms SA-P03 PRIME™ M4A1 Carbine AEG should suit you perfectly! Taking the classic M4A1 shape, Specna Arms has given this beastly full metal build internals to match its external quality, including a powerful Dark Mattery brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings, a reinforced tappet plate for reliable feeding and plenty more!

The PRIME™ is Specna's newest line of AEGs, they have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG the option to choose either the Gate ASTER II Bluetooth™ MOSFET or the HAL™ MOSFET, substantially improving trigger response and programmable firing modes. Which you choose depends on your needs; the ASTER II™ is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL™ version is great for users who prefer an easier-to-use yet still advanced MOSFET.

If you're looking for a highly modular primary with a military aesthetic, a hefty full metal build and pre-upgraded internals to rival the best, you've just found what you need! The Specna Arms SA-P03 PRIME™ M4A1 Carbine AEG is about the best an M4A1 AEG can get in this price range, miles ahead of its rivals!

If you're after a high-performance primary with a militant aesthetic, check out the Specna Arms SA-P04 PRIME™ M4A1 CQBR AEG! Equipped with some of the best internals we've ever seen in an out-of-the-box AEG, the SA-P04 boasts a powerful Dark Matter brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings, a reinforced tappet plate, and much, much more!

The Prime™ is Specna's newest line of AEGs, taking its traditional AEG silhouettes and stripping away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG is the option to choose either the Gate ASTER II Bluetooth™ MOSFET or the HAL™ MOSFET, substantially improving trigger response and programmable firing modes. Which you choose depends on your needs; the ASTER II is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL™ version is great for users who prefer an easier-to-use yet still advanced MOSFET.

If you're into the classic M4A1 look and want the best internals an out-of-the-box AEG can hope for, Specna Arms has your six with the SA-P04 PRIME™ M4A1 CQBR AEG. A beast in terms of both build quality and performance, the SA-P04 is the ideal base for any military-style custom build!

If you're into realism, you'll love this one! The EMG Daniel Defense DD4™ M4A1 FSP RIII 14.5" GBBR is a full metal WA System GBBR boasting realistic licensed Daniel Defense trademarks and jaw-rattling recoil with each shot. Equipped with the aesthetically pleasing FSP rail, which combines ultra-modern M-LOK slots with the retro M4A1 front sight/gas block, the DD4 FSP will definitely stand out amongst the ever-growing number of DD replicas out there!

Inside, this GBBR is based on the Western Arms GBBR system but enhanced with choice upgrades added by the OEM, Golden Eagle. These include a full set of steel trigger parts and a steel bolt catch to effectively immunise the DD4 FSP from long-term parts wear, along with a redesigned HOP-up which uses standard AEG-spec HOP-up buckings and inner barrels, making upgrades far easier to find.

A superb quality build on the outside, with a violent firing experience and realism dialled up to maximum, the EMG Daniel Defense DD4™ M4A1 FSP RIII 14.5" GBBR is a considerable step up from AEGs and HPA platforms from a realism standpoint. If you like to work hard for every kill and experience the most realistic form of Airsoft skirmishing, the DD4™ FSP will put a big smile on your face!

If you're into realism, you'll love this one! The EMG Daniel Defense DD4™ M4A1 FSP RIII 14.5" GBBR is a full metal WA System GBBR boasting realistic licensed Daniel Defense trademarks and jaw-rattling recoil with each shot. Equipped with the aesthetically pleasing FSP rail, which combines ultra-modern M-LOK slots with the retro M4A1 front sight/gas block, the DD4 FSP will definitely stand out amongst the ever-growing number of DD replicas out there!

Inside, this GBBR is based on the Western Arms GBBR system but enhanced with choice upgrades added by the OEM, Golden Eagle. These include a full set of steel trigger parts and a steel bolt catch to effectively immunise the DD4 FSP from long-term parts wear, along with a redesigned HOP-up which uses standard AEG-spec HOP-up buckings and inner barrels, making upgrades far easier to find.

A superb quality build on the outside, with a violent firing experience and realism dialled up to maximum, the EMG Daniel Defense DD4™ M4A1 FSP RIII 14.5" GBBR is a considerable step up from AEGs and HPA platforms from a realism standpoint. If you like to work hard for every kill and experience the most realistic form of Airsoft skirmishing, the DD4™ FSP will put a big smile on your face!

If you are looking for a mid-length M4/AR-15 AEG with a look which stands out, the KRYTAC Warsport GPR-CC Assault Rifle is calling your name! This M4/AR-15 variant sports full licencing from Warsport and the bomb-proof build quality and impressive performance KRYTAC builds are known for.

With a 16-inch outer barrel and a lengthy upper 20mm Picatinny rail, the GPR-CC would be an ideal base gun for a DMR build (just ask Bolster Armouries!), made even better by its focus on weight reduction and mobility. The GPR-CC is ideal for the skirmisher who wants something with a longer barrel for outdoor skirmishes without compromising on agility and adjustability.

The latest from the Airsoft Gods at Tokyo Marui, the AK White Storm is a reinvention of the original TM AKM NGRS rifle from many years ago. The White Storm takes the classic AK design and outfits it for a more modern era, complete with a 6 position retractable stock, both M-LOK and 20mm Picatinny rail mounting interfaces and an ergonomic pistol grip which will leave you not wanting to put this rifle down! 

The most notable addition to this new AK NGRS is its "stop firing on empty" feature, which will never leave you guessing as to when your magazine has run dry. If this happens, the AK White storm does what a real AK does, absolutely nothing - meaning you must quickly insert a loaded magazine and allow the White Storm to continue to unleash a white storm of BBs upon the enemy team!

If you're after a full metal AK with Russian vibes, the Evolution E-74 AKS-74 Paratrooper AEG is a solid choice. Boasting full metal construction with plenty of stamped steel in the mix, the E-74 is inspired by the real steel AKS-74, the folding stock variant of the Cold War era AK-74 issued to airborne troops and mechanised infantry.

Inside, the E-74 is equipped with basic but reliable internals, based around a TM-spec version 3 gearbox with 18:1 ratio steel gears running on 6mm ball bearing bushings. The piston is polymer with a full steel tooth rack, and the spring guide is a quick-change example, making power tuning a breeze. Also inside is a 6.01mm tightbore inner barrel paired with an alloy slider adjustable HOP-up unit, providing superb accuracy potential with high-quality BBs. Those looking for a simple yet effective full metal AK, look no further than the Evolution E-74 AKS-74 Paratrooper AEG!

If you need a "bad guy" primary but don't want to spend too much, the Evolution E-104 AK-104 Tanker AEG is calling your name! A full metal build with a steel receiver and top cover, the E-104 is based on the real steel AK-104, a short-barreled AK rifle intended for airborne troops and special forces, ideal for a wide range of OPFOR-themed loadouts.

Inside, the E-104 is equipped with basic but reliable internals, based around a TM-spec version 3 gearbox with 18:1 ratio steel gears running on 6mm ball bearing bushings. The piston is polymer with a full steel tooth rack, and the spring guide is a quick-change example, making power tuning a breeze. Also inside is a 6.01mm tightbore inner barrel paired with an alloy slider adjustable HOP-up unit, providing superb accuracy potential with high-quality BBs. Whether you're after an affordable OPFOR platform or simply appreciate a simple yet effective full metal AK build, the Evolution E-104 AK-104 Tanker AEG is a solid choice!

If you are looking for a lightning-fast PDW which marries superb build quality and impressive internals with licenced trademarks, check out the EMG TROY SOCC PDW M4/AR-15 AEG! This compact, full-metal AR platform boasts full licenced trademarks from Troy Industries and a slick modern design at the cutting edge of ergonomics. 

The handguard is a fantastic replica of the real steel Troy 7.6" M-LOK handguard, the muzzle device is a dead-on match for the hyper-aggressive Troy Medieval Flash Suppressor and the stock is based on the real steel SB Tactical SBA3 Brace but with a rubber butt plate so it can be shouldered like a proper stock. Those who like the latest civilian tactical platforms from the real steel world are going to love this!

On the inside, things are equally impressive, boasting a pre-upgraded version 2 gearbox fitted with 8mm bushings, a polymer piston with a full steel tooth rack, steel ball-bearing spring guide and an in-line MOSFET to improve trigger response, electrical efficiency and trigger contact lifespan. If a compact AR is on the cards for your next purchase and you like the elite real steel look, the TROY SOCC PDW should suit you perfectly!

Introducing the Evolution Airsoft ETS series, featuring the usual Evolution Airsoft quality but now with a programmable Electronic trigger unit and MOSFET. The E416 features full metal external parts with steel trim components and high quality reinforced polymer furniture. 

If you love steel in large quantities, you'll love the LK-53A3  M-LOK AEG; ETU Version from LCT! Built to an incredible standard using a stamped steel receiver and welded stamped steel cocking tube, this is about as realistic as it gets in Airsoft! Inspired by the giant MP5 or mini G3 from the real steel world, this modernised example is rocking an M-LOK handguard and 1913/20mm Picatinny stock interface at the rear, giving this boomer build some zoomer customisation options!

Inside, the LK35A3 is no slouch, based around a version 2 gearbox with 18:1 steel gears running on 9mm bushings, a polycarbonate piston with a full steel tooth rack, CNC aluminium cylinder and piston heads and a steel quick-change spring guide with ball bearings in its base to reduce wear on the gearbox shell. Also inside is an in-line MOSFET/ETU to prevent trigger lockups and 18AWG low-resistance wiring for peak electrical efficiency. 

A real beast both inside and out in a head-turning design rarely seen on skirmish sites, the LCT LK53A3 brings unique custom vibes to the table in a hefty, realistic build. If you're looking for an AEG build at the peak of realism with some modern custom touches, the LCT LK-53A3 M-LOK AEG; ETU Version should be on your shopping list!

If you're looking for a modern M4/AR-15 platform with internals to rival the best, the Specna Arms SA-P07 PRIME™ M4/AR-15 KeyMod AEG should be in your sights. Taking traditional AEG silhouettes, the Specna's PRIME™ range boasts a full internal overhaul, equipped with some of the best parts available in a stock AEG. These improvements include the Magnus TDC HOP-up chamber paired with the Helium HOP-up bucking, 16:1 CNC Steel gears and the powerful Dark Matter Brushless motor, to name but a few!

The highlight of this AEG is the option to choose either the Gate ASTER II™ Bluetooth MOSFET or the HAL™ MOSFET, substantially improving trigger response and offering programmable firing modes. Which you choose depends on your needs; the ASTER II™ is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL version is great for users who prefer an easier-to-use yet still advanced MOSFET.

Fitted with a sound-amplifying muzzle device inset into its CNC aluminium KeyMod handguard, the SA-P07 brings sleek, dynamic looks to the table along with a menacing firing sound to keep the enemy at bay. If you're after a pre-upgraded AEG with as much bark as it has bite, the Specna Arms SA-P07 PRIME™ M4/AR-15 KeyMod AEG deserves your attention!

If you're looking for a modern M4/AR-15 platform with internals to rival the best, the Specna Arms SA-P07 PRIME™ M4/AR-15 KeyMod AEG should be in your sights. Taking traditional AEG silhouettes, the Specna's PRIME™ range boasts a full internal overhaul, equipped with some of the best parts available in a stock AEG. These improvements include the Magnus TDC HOP-up chamber paired with the Helium HOP-up bucking, 16:1 CNC Steel gears and the powerful Dark Matter Brushless motor, to name but a few!

The highlight of this AEG is the option to choose either the Gate ASTER II™ Bluetooth MOSFET or the HAL™ MOSFET, substantially improving trigger response and offering programmable firing modes. Which you choose depends on your needs; the ASTER II™ is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL version is great for users who prefer an easier-to-use yet still advanced MOSFET.

Fitted with a sound-amplifying muzzle device inset into its CNC aluminium KeyMod handguard, the SA-P07 brings sleek, dynamic looks to the table along with a menacing firing sound to keep the enemy at bay. If you're after a pre-upgraded AEG with as much bark as it has bite, the Specna Arms SA-P07 PRIME™ M4/AR-15 KeyMod AEG deserves your attention!

If you're after an AEG which won't need a tech's touch to shoot perfectly, the Specna Arms SA-P14 PRIME™ M4/AR-15 M-LOK AEG is one to watch. The PRIME™ range is Specna's latest and greatest line of AEGs. Taking traditional AEG silhouettes, Specna has revamped the internals with a new set of improved parts to increase performance, consistency and rate of fire. These improvements include the Magnus TDC HOP-up chamber paired with the Helium HOP-up bucking, 16:1 CNC Steel gears and the powerful Dark Matter Brushless motor, to name but a few!

The highlight of this AEG is the option to choose either the Gate ASTER II™ Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and offering programmable firing modes. Which you choose depends on your needs; the ASTER II™ is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL version is great for users who prefer an easier-to-use yet still advanced MOSFET.

If you're searching for a full metal AR you don't need to mess with, the Specna Arms SA-P14 PRIME™ M4/AR-15 M-LOK AEG ticks all the boxes! A full metal build which handles like a dream with stock internals rival platforms can only dream about, the SA-P14 is ready to go anywhere and do anything!

If you're after a more exciting firing experience with a side of realism, the EMG Daniel Defense DD4™ AR-15 RIII 16" GBBR should be right up your street! Inspired by Daniel Defense's latest real steel AR-15 lineup, known as the RIII, this is the 16" barrel version, ideal for dealing with foes at long range with the pre-requite build quality and licensed trademarks we expect from EMG.

Inside, this GBBR is based on the Western Arms GBBR system but enhanced with choice upgrades added by the OEM, Golden Eagle. These include a full set of steel trigger parts and a steel bolt catch to effectively immunise the DD4 16" from long-term parts wear, along with a redesigned HOP-up which uses standard AEG-spec HOP-up buckings and inner barrels, making upgrades far easier to find.

If you're into the latest DD designs and appreciate realism dialled up to maximum, the EMG Daniel Defense DD4™ AR-15 RIII 16" GBBR should be on your radar. A significant improvement over the original WA M4 GBBR thanks to its full metal build, steel trigger parts, AEG HOP-up compatibility and reinforced charging handle, the DD4™ 16" is make a fine outdoor platform for the realism obsessed!

If you're after a more exciting firing experience with a side of realism, the EMG Daniel Defense DD4™ AR-15 RIII 16" GBBR should be right up your street! Inspired by Daniel Defense's latest real steel AR-15 lineup, known as the RIII, this is the 16" barrel version, ideal for dealing with foes at long range with the pre-requite build quality and licensed trademarks we expect from EMG.

Inside, this GBBR is based on the Western Arms GBBR system but enhanced with choice upgrades added by the OEM, Golden Eagle. These include a full set of steel trigger parts and a steel bolt catch to effectively immunise the DD4 16" from long-term parts wear, along with a redesigned HOP-up which uses standard AEG-spec HOP-up buckings and inner barrels, making upgrades far easier to find.

If you're into the latest DD designs and appreciate realism dialled up to maximum, the EMG Daniel Defense DD4™ AR-15 RIII 16" GBBR should be on your radar. A significant improvement over the original WA M4 GBBR thanks to its full metal build, steel trigger parts, AEG HOP-up compatibility and reinforced charging handle, the DD4™ 16" is make a fine outdoor platform for the realism obsessed!

If you seek a platform pre-upgraded to the nines which can go anywhere and do anything, your needs have been met with the Specna Arms SA-P20 PRIME™ M4/AR-15 M-LOK AEG! A full metal build with a lightweight skeletonised M-LOK handguard, the SA-P20 is ultra-modern on the outside and kitted out internally with the best feature set we've seen in a mass-produced AEG!

The PRIME™ range is Specna's newest line of AEGs. Taking traditional AEG silhouettes, Specna has revamped the internals with a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG is the option to choose either the Gate ASTER II™ Bluetooth MOSFET or the HAL™ MOSFET, substantially improving trigger response and offering programmable firing modes. Which you choose depends on your needs; the ASTER II™ is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL version is great for users who prefer an easier-to-use yet still advanced MOSFET.

If you're after a full metal platform with the length to compete at long range and the agility to turn and burn up close, the Specna Arms SA-P20 PRIME™ M4/AR-15 M-LOK AEG should be on your shopping list. Upgraded beyond any other mass-produced platform you can buy off the shelf with Specna's ultra-modern full metal externals, the SA-P20 is ready to rock!

If you're after a premium primary with an elite look, the EMG TROY SOCC Premium Primary Pack was made with you in mind! We paired the EMG Troy SOCC PDW AEG with 2 extra Troy Battlemag Mid-caps, 4000 0.25g BBs, a speed loader, a 7.4V LiPo battery, a LiPo balance charger and a safe charging bag. You'll also get a HASTA Large Wheeled Rifle Hard case to store and transport your pride and joy inside, with an awesome discount as a bonus!

If you're just starting your Airsoft journey and looking to get involved without spending too much, you're in safe hands with the CYMA CM.513 M4 SD RIS AEG! A proven platform made even better in its latest iteration, the CM.513 is part of CYMA's "Sport" line, rocking a lightweight and handy build with no performance compromises, ideal for those with less physical strength or those who like to conserve energy!

The alloy version 2 gearbox inside the CM.513 is equipped with 18:1 standard ratio gears running on 8mm steel bushings, a type 1 cylinder, reinforced polymer compression parts and a quick change spring system. Also inside is a 6.03mm tightbore inner barrel and an updated rotary HOP-up unit, giving you above-average accuracy potential and the latest HOP-up unit design for M4/AR-15 AEG platforms. All internal parts are standard Tokyo Marui AEG spec, meaning the sky is the limit when it comes to upgrades later down the line!

Externally, the CM.513 is inspired by real-world integrally suppressed M4/AR-15 rifles designed for stealth in a close-quarters environment. The handguard is a 20mm Picatinny quad-railed example, ready for vertical or angled grips, lasers or tactical flashlights. The receiver is also railed and ready for a red dot sight or scope but comes with flip-up iron sights to get you started. If you've been searching for an affordable, reliable and well-equipped Airsoft primary for your first foray into the sport, the CYMA CM.513 M4 SD RIS AEG is one of the best options out there!

If you're getting into Airsoft on a tight budget and you're an AK fan, the CYMA CM.520 AK-47 Tactical AEG w/ Solid Stock is the perfect starter platform. Made predominantly from high-density polymer with an alloy outer barrel, this AK is part of CYMA's new "Sport" range; lightweight and handy with no performance compromises, ideal for those with less physical strength or those who like to fight easy!

Inside, the CM.520 has a respectable feature set including some important pre-upgraded parts, keeping it competitive on the field despite its entry-level price point. The alloy version 3 gearbox is equipped with steel 18:1 gears running on 7mm steel bushings, a reinforced nylon piston, piston head and cylinder head and a type 0 cylinder, all of which are compatible with aftermarket upgrade parts. The inner barrel is a 6.03mm tightbore example, giving you improved accuracy and higher FPS from the same strength spring, a thoughtful pre-upgrade for long-range effectiveness.

On the outside, the CM.520 is rocking a 20mm Picatinny quad-railed handguard, offering a 20mm rail on top for a red dot sight, another on the bottom for a vertical grip and two short side rails, ideally suited to a tactical flashlight or aiming laser. Just like a real AK, the controls are super simple and easy to master and when paired with its lightweight and agile build, this makes the CM.520 AK-47 Tactical AEG w/ Solid Stock a force to contend with either outdoors or in CQB!

If you have a taste for realism, recoil and a new challenge in game, the Noveske N4 GBBR from EMG will give you what you need. This Gas Blowback Rifle boasts full metal construction, licenced Noveske trademarks and internals based on the best of the best when it comes to GBBRs; the Tokyo Marui ZET system.

Not for the faint of heart or those who like to fight easy, a GBBR provides unparalleled realism with its realistic manual of arms involving loading the first round using the charging handle, counting your shots carefully due to low-cap magazines and taking your reloading skills to the next level thanks to its functional bolt lock. While a GBBR is a challenge to operate compared to a simple AEG, there is nothing that can touch a GBBR when it comes to its immersive firing experience and unparalleled realism.

Licenced by Noveske through EMG and manufactured by Double Eagle, the N4 has absolutely gorgeous externals, with a thick, hard-wearing finish that looks phenomenal and showcases the crisply engraved Noveske trademarks which tie the whole piece together. The N4 GBBR also has a full steel trigger group pre-installed, saving you money down the line on essential longevity upgrades required to keep a GBBR running in the long term. If you have been holding out on a GBBR, waiting for something to pop up that has the right balance of affordability, efficiency and aftermarket support, now is the time!

If you have a taste for realism, recoil and a new challenge in game, the Noveske N4 GBBR from EMG will give you what you need. This Gas Blowback Rifle boasts full metal construction, licenced Noveske trademarks and internals based on the best of the best when it comes to GBBRs; the Tokyo Marui ZET system.

Not for the faint of heart or those who like to fight easy, a GBBR provides unparalleled realism with its realistic manual of arms involving loading the first round using the charging handle, counting your shots carefully due to low-cap magazines and taking your reloading skills to the next level thanks to its functional bolt lock. While a GBBR is a challenge to operate compared to a simple AEG, there is nothing that can touch a GBBR when it comes to its immersive firing experience and unparalleled realism.

Licenced by Noveske through EMG and manufactured by Double Eagle, the N4 has absolutely gorgeous externals, with a thick, hard-wearing finish that looks phenomenal and showcases the crisply engraved Noveske trademarks which tie the whole piece together. The N4 GBBR also has a full steel trigger group pre-installed, saving you money down the line on essential longevity upgrades required to keep a GBBR running in the long term. If you have been holding out on a GBBR, waiting for something to pop up that has the right balance of affordability, efficiency and aftermarket support, now is the time!

If you have a taste for realism, recoil and a new challenge in game, the Noveske N4 GBBR from EMG will give you what you need. This Gas Blowback Rifle boasts full metal construction, licenced Noveske trademarks and internals based on the best of the best when it comes to GBBRs; the Tokyo Marui ZET system.

Not for the faint of heart or those who like to fight easy, a GBBR provides unparalleled realism with its realistic manual of arms involving loading the first round using the charging handle, counting your shots carefully due to low-cap magazines and taking your reloading skills to the next level thanks to its functional bolt lock. While a GBBR is a challenge to operate compared to a simple AEG, there is nothing that can touch a GBBR when it comes to its immersive firing experience and unparalleled realism.

Licenced by Noveske through EMG and manufactured by Double Eagle, the N4 has absolutely gorgeous externals, with a thick, hard-wearing finish that looks phenomenal and showcases the crisply engraved Noveske trademarks which tie the whole piece together. The N4 GBBR also has a full steel trigger group pre-installed, saving you money down the line on essential longevity upgrades required to keep a GBBR running in the long term. If you have been holding out on a GBBR, waiting for something to pop up that has the right balance of affordability, efficiency and aftermarket support, now is the time!

If you're just starting your Airsoft adventure and need a cheap starter replica which can do it all, the CYMA CM.506 M4A1 RIS CQB AEG Rifle is ideal. This M4/AR-15 platform AEG is constructed almost entirely from high-density polymer with an alloy outer barrel and trim parts, keeping the build lightweight and agile, not to mention cost-effective. While it weighs practically nothing (only 1.7kg!), the CM.506 doesn't feel flimsy thanks to its use of high-density ABS polymer. Inside we are treated to surprisingly well-equipped internals, offering respectable performance in both outdoor and indoor skirmishes.

The alloy version 2 gearbox the CM.506 is based around is equipped with 18:1 standard ratio gears running on 8mm steel bushings, a type 1 cylinder, reinforced polymer compression parts and a quick change spring system. Also inside is a 6.03mm tightbore inner barrel and an updated rotary HOP-up unit, giving you above-average accuracy potential and the latest HOP-up unit design for M4/AR-15 AEG platforms. All internal parts are standard Tokyo Marui AEG spec, meaning the sky is the limit when it comes to upgrades later down the line!

Externally, the CM.506 is absolutely mission-ready, equipped with a 20mm Picatinny quad rail handguard and 20mm railed receiver, ready for any 20mm Picatinny accessories you need, from red dot sights and scopes to vertical foregrips, laser aiming modules and tactical flashlights. The alloy outer barrel is rocking 14mm CCW male threads, meaning you can add a tracer unit to make your BBs glow or a suppressor for sneaky styling. If you're ready to get into the sport with one of Airsoft's most popular platforms, the CYMA CM.506 M4A1 RIS CQB AEG Rifle is ready for you!

For those who want a lightweight and affordable platform, no matter your skirmishing experience, the Specna Arms SA-F05-RL FLEX™ HAL¹ ETU™ M4/AR-15 AEG is the perfect rifle for you! The SA-F05-RL follows Specna's FLEX™ build style, constructed predominantly from high-density polymer with an alloy outer barrel, resulting in a lightweight and agile build which won't have your arms burning after a gameday!

Inside, we are treated to a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, offering superb accuracy potential and improved air efficiency, giving you a slight FPS boost with the same strength spring. Also inside is the HAL¹ MOSFET, offering a range of programmable fire modes usually only present in platforms twice this price!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. That's one heck of a feature set for such a low-cost platform! If you're looking for a low-cost, lightweight primary but demand advanced internals, the Specna Arms SA-F05-RL FLEX™ HAL¹ ETU™ M4/AR-15 AEG is what you need!