All Electric Parts

Are you having HOP-up troubles with your M4 platforms? Delta Armory has you covered! This HOP-up chamber is a replacement part and comes with all the necessary pieces for installation, including the HOP-up rubber and nub. The main chamber is made from a sturdy plastic polymer and is compatible with all M4 style AEGs which have V2 Gearboxes. It is an affordable solution to mend your platforms with damaged or old HOP-up chambers.

The Delta Armory HOP-up chamber is an affordable replacement for M4/AR-15 AEGs, fix up those old primaries and get them shooting again with this low-price solution.

If you're looking for all-round improvements in your HOP-up performance, the Maple Leaf Macaron HOP-up Bucking is calling your name! Designed to fit Airsoft AEGs and enhance both accuracy and range, the Macaron boasts a flat diamond-shaped patch for greater contact area with your BBs, giving a "Flat HOP" style effect when paired with an OMEGA or OHM HOP-up nub.

When compared to the Monster HOP-up bucking, the Macaron's contact patch is slightly less prominent, designed to provide a balance between range and grouping size as opposed to the Monster's focus on pure range. Compatibility-wise, the Macaron should fit most Airsoft AEGs though some level of expertise is required for fitting and tuning. If you want tighter groups and more range, the Maple Leaf Macaron HOP-up Bucking for AEG will do the trick!

If you're looking for all-round improvements in your HOP-up performance, the Maple Leaf Macaron HOP-up Bucking is calling your name! Designed to fit Airsoft AEGs and enhance both accuracy and range, the Macaron boasts a flat diamond-shaped patch for greater contact area with your BBs, giving a "Flat HOP" style effect when paired with an OMEGA or OHM HOP-up nub.

When compared to the Monster HOP-up bucking, the Macaron's contact patch is slightly less prominent, designed to provide a balance between range and grouping size as opposed to the Monster's focus on pure range. Compatibility-wise, the Macaron should fit most Airsoft AEGs though some level of expertise is required for fitting and tuning. If you want tighter groups and more range, the Maple Leaf Macaron HOP-up Bucking for AEG will do the trick!

If you're looking for all-round improvements in your HOP-up performance, the Maple Leaf Macaron HOP-up Bucking is calling your name! Designed to fit Airsoft AEGs and enhance both accuracy and range, the Macaron boasts a flat diamond-shaped patch for greater contact area with your BBs, giving a "Flat HOP" style effect when paired with an OMEGA or OHM HOP-up nub.

When compared to the Monster HOP-up bucking, the Macaron's contact patch is slightly less prominent, designed to provide a balance between range and grouping size as opposed to the Monster's focus on pure range. Compatibility-wise, the Macaron should fit most Airsoft AEGs though some level of expertise is required for fitting and tuning. If you want tighter groups and more range, the Maple Leaf Macaron HOP-up Bucking for AEG will do the trick!

If you're looking for all-round improvements in your HOP-up performance, the Maple Leaf Macaron HOP-up Bucking is calling your name! Designed to fit Airsoft AEGs and enhance both accuracy and range, the Macaron boasts a flat diamond-shaped patch for greater contact area with your BBs, giving a "Flat HOP" style effect when paired with an OMEGA or OHM HOP-up nub.

When compared to the Monster HOP-up bucking, the Macaron's contact patch is slightly less prominent, designed to provide a balance between range and grouping size as opposed to the Monster's focus on pure range. Compatibility-wise, the Macaron should fit most Airsoft AEGs though some level of expertise is required for fitting and tuning. If you want tighter groups and more range, the Maple Leaf Macaron HOP-up Bucking for AEG will do the trick!

If you're looking for all-round improvements in your HOP-up performance, the Maple Leaf Macaron HOP-up Bucking is calling your name! Designed to fit Airsoft AEGs and enhance both accuracy and range, the Macaron boasts a flat diamond-shaped patch for greater contact area with your BBs, giving a "Flat HOP" style effect when paired with an OMEGA or OHM HOP-up nub.

When compared to the Monster HOP-up bucking, the Macaron's contact patch is slightly less prominent, designed to provide a balance between range and grouping size as opposed to the Monster's focus on pure range. Compatibility-wise, the Macaron should fit most Airsoft AEGs though some level of expertise is required for fitting and tuning. If you want tighter groups and more range, the Maple Leaf Macaron HOP-up Bucking for AEG will do the trick!

If you're jealous of GBB users running the superb Crazy Jet inner barrel, the Maple Leaf Hot Shot HOP-Up Bucking for AEG will level the playing field! This HOP-up bucking is designed for use with standard AEG HOP-up units paired with Maple Leaf's GBB/VSR type Crazy Jet inner barrel, boasting a wedge-shaped concave contact patch with nubs on either side to encourage consistent BB chambering.

While the Hot Shot Bucking may work with other GBB/VSR type inner barrels, it is not compatible with standard AEG inner barrels. Multiple degrees of hardness are available, with an option for almost any BB weight and muzzle energy combination. If you want the performance benefits of the Crazy Jet barrel with your AEG, the Maple Leaf Hot Shot HOP-Up Bucking is essential!

If you're jealous of GBB users running the superb Crazy Jet inner barrel, the Maple Leaf Hot Shot HOP-Up Bucking for AEG will level the playing field! This HOP-up bucking is designed for use with standard AEG HOP-up units paired with Maple Leaf's GBB/VSR type Crazy Jet inner barrel, boasting a wedge-shaped concave contact patch with nubs on either side to encourage consistent BB chambering.

While the Hot Shot Bucking may work with other GBB/VSR type inner barrels, it is not compatible with standard AEG inner barrels. Multiple degrees of hardness are available, with an option for almost any BB weight and muzzle energy combination. If you want the performance benefits of the Crazy Jet barrel with your AEG, the Maple Leaf Hot Shot HOP-Up Bucking is essential!

If you're building an AEG for maximum range, the Maple Leaf Monster HOP-up Bucking for AEG will be an asset to your objective. Designed with a diamond-shaped contact patch to increase surface contact with your BBs, the Monster is ideally used with heavy BBs (0.28g+) and provides increased HOP-up effect, especially when paired with an OMEGA or OHM HOP-up nub.

The Monster is available in a wide range of hardnesses, offering an option for any build objective, from CQB to DMR. Compatibility-wise, this is a standard AEG HOP-up rubber and should fit the vast majority of Airsoft AEGs on the market but may require expertise and tuning to fit. If you're getting out-ranged and want to go from prey to predator, the Maple Leaf Monster HOP-up bucking belongs in your build!

If you're building an AEG for maximum range, the Maple Leaf Monster HOP-up Bucking for AEG will be an asset to your objective. Designed with a diamond-shaped contact patch to increase surface contact with your BBs, the Monster is ideally used with heavy BBs (0.28g+) and provides increased HOP-up effect, especially when paired with an OMEGA or OHM HOP-up nub.

The Monster is available in a wide range of hardnesses, offering an option for any build objective, from CQB to DMR. Compatibility-wise, this is a standard AEG HOP-up rubber and should fit the vast majority of Airsoft AEGs on the market but may require expertise and tuning to fit. If you're getting out-ranged and want to go from prey to predator, the Maple Leaf Monster HOP-up bucking belongs in your build!

If you're building an AEG for maximum range, the Maple Leaf Monster HOP-up Bucking for AEG will be an asset to your objective. Designed with a diamond-shaped contact patch to increase surface contact with your BBs, the Monster is ideally used with heavy BBs (0.28g+) and provides increased HOP-up effect, especially when paired with an OMEGA or OHM HOP-up nub.

The Monster is available in a wide range of hardnesses, offering an option for any build objective, from CQB to DMR. Compatibility-wise, this is a standard AEG HOP-up rubber and should fit the vast majority of Airsoft AEGs on the market but may require expertise and tuning to fit. If you're getting out-ranged and want to go from prey to predator, the Maple Leaf Monster HOP-up bucking belongs in your build!

If you're building an AEG for maximum range, the Maple Leaf Monster HOP-up Bucking for AEG will be an asset to your objective. Designed with a diamond-shaped contact patch to increase surface contact with your BBs, the Monster is ideally used with heavy BBs (0.28g+) and provides increased HOP-up effect, especially when paired with an OMEGA or OHM HOP-up nub.

The Monster is available in a wide range of hardnesses, offering an option for any build objective, from CQB to DMR. Compatibility-wise, this is a standard AEG HOP-up rubber and should fit the vast majority of Airsoft AEGs on the market but may require expertise and tuning to fit. If you're getting out-ranged and want to go from prey to predator, the Maple Leaf Monster HOP-up bucking belongs in your build!

If you're building an AEG for maximum range, the Maple Leaf Monster HOP-up Bucking for AEG will be an asset to your objective. Designed with a diamond-shaped contact patch to increase surface contact with your BBs, the Monster is ideally used with heavy BBs (0.28g+) and provides increased HOP-up effect, especially when paired with an OMEGA or OHM HOP-up nub.

The Monster is available in a wide range of hardnesses, offering an option for any build objective, from CQB to DMR. Compatibility-wise, this is a standard AEG HOP-up rubber and should fit the vast majority of Airsoft AEGs on the market but may require expertise and tuning to fit. If you're getting out-ranged and want to go from prey to predator, the Maple Leaf Monster HOP-up bucking belongs in your build!

If you use heavy BBs and really want to send 'em, the Maple Leaf MR HOP Bucking for AEG belongs in your build! The MR HOP-up Bucking offers a wider and longer “R-HOP” style contact patch for increased HOP-up effect and extended range with heavy BBs. The MR HOP also uses a shield-shaped groove around the contact patch to allow it to stretch and add to the strong HOP-up effect along with an air seal improving C-ring which ensures the bucking is firmly fitted to the barrel and unable to slip or rotate.

MR stands for “Maximum Range”, a design based on home-brewed R-HOP buckings, intended to prioritise range over grouping size and is best used paired with a Maple Leaf OMEGA or OHM HOP-up nub. Compatibility-wise, the MR HOP is designed to fit most Airsoft AEGs but as always, a certain level of expertise and tuning will be required for installation. If you're committed to long-range leaning and want your primary performing at its best, the Maple Leaf MR HOP Bucking for AEG is essential!

If you use heavy BBs and really want to send 'em, the Maple Leaf MR HOP Bucking for AEG belongs in your build! The MR HOP-up Bucking offers a wider and longer “R-HOP” style contact patch for increased HOP-up effect and extended range with heavy BBs. The MR HOP also uses a shield-shaped groove around the contact patch to allow it to stretch and add to the strong HOP-up effect along with an air seal improving C-ring which ensures the bucking is firmly fitted to the barrel and unable to slip or rotate.

MR stands for “Maximum Range”, a design based on home-brewed R-HOP buckings, intended to prioritise range over grouping size and is best used paired with a Maple Leaf OMEGA or OHM HOP-up nub. Compatibility-wise, the MR HOP is designed to fit most Airsoft AEGs but as always, a certain level of expertise and tuning will be required for installation. If you're committed to long-range leaning and want your primary performing at its best, the Maple Leaf MR HOP Bucking for AEG is essential!

If you use heavy BBs and really want to send 'em, the Maple Leaf MR HOP Bucking for AEG belongs in your build! The MR HOP-up Bucking offers a wider and longer “R-HOP” style contact patch for increased HOP-up effect and extended range with heavy BBs. The MR HOP also uses a shield-shaped groove around the contact patch to allow it to stretch and add to the strong HOP-up effect along with an air seal improving C-ring which ensures the bucking is firmly fitted to the barrel and unable to slip or rotate.

MR stands for “Maximum Range”, a design based on home-brewed R-HOP buckings, intended to prioritise range over grouping size and is best used paired with a Maple Leaf OMEGA or OHM HOP-up nub. Compatibility-wise, the MR HOP is designed to fit most Airsoft AEGs but as always, a certain level of expertise and tuning will be required for installation. If you're committed to long-range leaning and want your primary performing at its best, the Maple Leaf MR HOP Bucking for AEG is essential!

If you use heavy BBs and really want to send 'em, the Maple Leaf MR HOP Bucking for AEG belongs in your build! The MR HOP-up Bucking offers a wider and longer “R-HOP” style contact patch for increased HOP-up effect and extended range with heavy BBs. The MR HOP also uses a shield-shaped groove around the contact patch to allow it to stretch and add to the strong HOP-up effect along with an air seal improving C-ring which ensures the bucking is firmly fitted to the barrel and unable to slip or rotate.

MR stands for “Maximum Range”, a design based on home-brewed R-HOP buckings, intended to prioritise range over grouping size and is best used paired with a Maple Leaf OMEGA or OHM HOP-up nub. Compatibility-wise, the MR HOP is designed to fit most Airsoft AEGs but as always, a certain level of expertise and tuning will be required for installation. If you're committed to long-range leaning and want your primary performing at its best, the Maple Leaf MR HOP Bucking for AEG is essential!

If you're looking for an affordable way to boost your AEG’s performance, the CYMA High Torque Neodymium Magnet Motor is a solid upgrade. This is the same motor found in CYMA's high-end Platinum E-Edition AEGs, delivering impressive torque and responsiveness thanks to its Neodymium magnet design.

As a high-torque motor, it’s ideal for DMR builds running stronger springs, as well as CQB setups where faster trigger response can make all the difference. That said, it’s also fast enough to give most standard AEGs a noticeable increase in rate of fire, making it a great all-rounder for improving your performance.

This Long Shaft model is compatible with M4/AR-15 platforms, P90s, SMG-5s (excluding the -K model), and G3 AEGs. It comes with a pre-installed D-type steel pinion gear and includes the pinion spring, so you're good to go right out of the box. It’s also pre-wired for spade connectors, meaning you can drop it in without needing to break out the soldering iron.

Whether you’re building a DMR, fine-tuning a CQB blaster, or just chasing a snappier trigger and higher ROF, the CYMA High Torque Neodymium Magnet Motor offers excellent value for money and reliable performance.

If you're looking for top-tier performance from your next AEG build, the Warhead Industries CNC Black Brushless Motor belongs inside! This, the long shaft variant, is designed for standard M4/AR-15, SMG-5, G3 and P90 AEGs and is the same motor used in Bolster Armouries custom builds, a testament to its quality, reliability and incredible performance.

The CNC Black Brushless motor boasts a CNC 7075 aluminium housing and hand-wound stator, promising a more precise wind than machine-wound stators which translates to improved power and efficiency. To keep the immense power of the Warhead CNC Black under control, the motor is equipped with what is known as an ESC (electronic speed control) module which protects your battery, provides low-voltage cutoff and regulates speed.

The perks of a brushless motor over conventional motors include higher torque-to-weight ratio, reduced wear and tear, reduced operating noise and reduced heat build-up, allowing you to let rip with long bursts guilt-free! If you have your sights set on the pinnacle of AEG performance, the Warhead Industries CNC Black Brushless Motor; Long Shaft is the motor you need to achieve it!

If you're looking for top-tier performance from your next AEG build, the Warhead Industries CNC Black Brushless Motor belongs inside! This, the long shaft variant, is designed for standard M4/AR-15, SMG-5, G3 and P90 AEGs and is the same motor used in Bolster Armouries custom builds, a testament to its quality, reliability and incredible performance.

The CNC Black Brushless motor boasts a CNC 7075 aluminium housing and hand-wound stator, promising a more precise wind than machine-wound stators which translates to improved power and efficiency. To keep the immense power of the Warhead CNC Black under control, the motor is equipped with what is known as an ESC (electronic speed control) module which protects your battery, provides low-voltage cutoff and regulates speed.

The perks of a brushless motor over conventional motors include higher torque-to-weight ratio, reduced wear and tear, reduced operating noise and reduced heat build-up, allowing you to let rip with long bursts guilt-free! If you have your sights set on the pinnacle of AEG performance, the Warhead Industries CNC Black Brushless Motor; Long Shaft is the motor you need to achieve it!

If you're looking for top-tier performance from your next AEG build, the Warhead Industries CNC Black Brushless Motor belongs inside! This, the long shaft variant, is designed for standard M4/AR-15, SMG-5, G3 and P90 AEGs and is the same motor used in Bolster Armouries custom builds, a testament to its quality, reliability and incredible performance.

The CNC Black Brushless motor boasts a CNC 7075 aluminium housing and hand-wound stator, promising a more precise wind than machine-wound stators which translates to improved power and efficiency. To keep the immense power of the Warhead CNC Black under control, the motor is equipped with what is known as an ESC (electronic speed control) module which protects your battery, provides low-voltage cutoff and regulates speed.

The perks of a brushless motor over conventional motors include higher torque-to-weight ratio, reduced wear and tear, reduced operating noise and reduced heat build-up, allowing you to let rip with long bursts guilt-free! If you have your sights set on the pinnacle of AEG performance, the Warhead Industries CNC Black Brushless Motor; Long Shaft is the motor you need to achieve it!

If you're looking for an upgraded AEG motor with the best price-to-performance ratio, you're looking for the Warhead Industries Base Brushless Motor! This brushless motor was conceived as a more affordable alternative to the legendary Warhead CNC Black Brushless Motor, boasting similar performance at an unbeatable price point. This, the short shaft variant, is designed for AR36, Thompson, AUG and AK AEGs.

Like the Warhead CNC Black motor used in Bolster Armouries builds, the Base boasts an ESC (electronic speed control) module which protects your battery, provides low-voltage cutoff and regulates speed to keep the immense power of the Base under control. The primary difference between the Base and the CNC Black is that the base uses a cast aluminium housing instead of a CNC machined one and the stator is wound via machines while the CNC Black is hand-wound.

The advantages of running a brushless motor are numerous, the most important of which is a far higher torque to weight ratio than conventional motors. The lack of brushes means there is less to go wrong and the motor is far quieter when running, guaranteeing a longer lifespan of smooth running performance. That said, these motors are intended for highly upgraded setups so we only recommend them for those who are confident working on AEG internals. If your custom-built beast needs an equally beastly motor to drive it, the Warhead Base Brushless Motor; Short Shaft is one of the best choices out there!

Building a speed demon of an AEG? You will need high speed gears to get the most out of it! The CNC steel High Speed Gearset from CYMA has a 13:1 ratio, which means every 13 motor turns the gearbox will cycle once, which is a step faster than standard 18:1 Airsoft gears. These gears pair perfectly with a high speed motor to provide a demonic rate of fire, as can be seen in the latest upgraded versions of CYMA's Platinum series AEGs. This gearset is designed for use with M120 springs and below only, so should be fine for most UK legal Airsoft AEGs but is not suitable for a DMR rifle with high FPS. This gearset is a version 2/3 set so should work in any AEG with a V2/3 gearbox and many others which share the same gears.

Upgrade your M4/M16 AEG. with an FPS Softair Tune Up Kit and increase its reliability and performance. The high-quality O-Rings ensure that it eliminates air leak and gives you perfect air seal for maximum efficiency and power. Constructed from Ergal (Aluminium 7075), the cylinder has a high strength and is resistant to fatigue with increased durability. The cylinder head is made for use with version 2 gearboxes, compatible with Tokyo Marui derived designs, with barrel lengths of 251 to 300mm.

This tune-up kit includes:

• Cylinder (CLTC)
• Cylinder Head (TC02E)
• Air Nozzle with O-Ring for M4/M16 (SPM4E)
• Double O-Ring Ball Bearing AEG Piston Head Advanced Type (TPAVN)

If you're building a beast of a gearbox, the Lonex Aluminium Cylinder Head for V2/3 Gearbox belongs inside! This CNC aluminium cylinder head is compatible with version 2 and version 3 gearboxes and is equipped with a pair of O-rings around its circumference intended to close the gap between the cylinder and head for maximum air efficiency.

Its robust CNC aluminium construction pairs perfectly with the shock-absorbing rubber pad pre-installed on the rear of the cylinder head, reducing impact stress on the gearbox shell, piston head and cylinder head for a longer lifespan. If you're upgrading your V2 or V3 gearbox or working on a scratch build, the Lonex Aluminium Cylinder Head for V2/3 Gearbox is a fantastic choice!

If you're looking for a way to enhance your AK, AR36, AUG or SMG-5K AEG, the GATE ASTER™ SE V3 MOSFET; Expert Firmware is a fantastic option for a reasonable price! This advanced electronic trigger unit replaces your conventional trigger contacts with optical sensors, allowing for 250 different trigger sensitivity settings, burst and binary fire modes and a plethora of other functions to be programmed in using either the trigger and fire selector or the Gate Control Station App.

This is the MOSFET we use in our Bolster Tuned platforms due to its fantastic balance of cost-effectiveness and performance, offering incredible efficiency improvements even before you get into the programmable features and customisation options. As with all ETU/MOSFET systems, a certain amount of expertise will be required to install the ASTER™ so if you're not confident, we suggest seeking a technician to carry out the installation process for you. This, the V3 model, is intended for version 3 AEG gearboxes found in AK, AR36, AUG and SMG-5K AEGs. If you're ready to take your AEG's performance to the next level, you're ready for the ASTER™!

If you want to transform your version 2 gearbox-equipped AEG into a true "smart gun", the Gate TITAN™ MOSFET V2; Expert Firmware will do exactly that. This advanced MOSFET/ETU system replaces the copper trigger contact inside the version 2 gearbox with optical sensors, eliminating the need for a cut-off lever, extending the lifespan of your AEG and offering unprecedented trigger sensitivity, fire mode and cycle control adjustment options.

The latest version of the TITAN™ V2 includes the Expert Firmware, meaning you have immediate access to the most advanced programming functions of the TITAN™ without needing to pay more to update the firmware. With the Gate USB-Link or Blulink, you can set your pre-cocking level for a speedy trigger response, adjust your trigger sensitivity, tune active braking and adjust the rate of fire for a truly custom setup that suits your playstyle perfectly. The usual programmable MOSFET functions of other ETUs are also present, including burst mode, binary trigger, semi-auto-only, ramping semi-auto, dual-stage trigger and sniper delay.

If you have an AEG mega-build on your mind using a version 2 gearbox, add the Gate TITAN™ MOSFET V2; Expert Firmware to your parts list to take it to the next level!

If you're running an SMG-5, M4/AR-15 or any other AEG which uses a version 2 gearbox, the GATE ASTER™ MOSFET will take your AEG to the next level. This advanced electronic trigger unit replaces your conventional trigger contacts with optical sensors, allowing for 250 different trigger sensitivity settings, burst and binary fire modes and a plethora of other functions to be programmed in using either the trigger and fire selector or the Gate Control Station App.

This set also includes the Gate QUANTUM CNC trigger which is compatible with M4/AR-15 AEGs but unfortunately won't work with SMG-5 or G3 platforms. When installed, the Quantum trigger offers 250 trigger sensitivity options via the ASTER's optical sensors. Constructed from CNC-machined aluminium, the Quantum both looks great and allows the ASTER™ to take full advantage of its optical trigger sensors.

This is the MOSFET we use in our Bolster Tuned platforms due to its fantastic balance of cost-effectiveness and performance, offering incredible efficiency improvements even before you get into the programmable features and customisation options. As with all ETU/MOSFET systems, a certain amount of expertise will be required to install the ASTER™ so if you're not confident, we suggest seeking a technician to carry out the installation process for you. If you're ready to take your AEG's performance to the next level, you're ready for the ASTER™

If you are looking for an affordable way to add advanced functionality to your M4/AR-15 AEG, this is worth a look! The Delta Armory Programmable ETU Processor Unit for V2 Gearbox replaces your conventional trigger assembly and offers burst mode, binary trigger and pre-cocking, all of which can be programmed in using the fire controls of the AEG itself. 

This ETU should fit most M4/AR-15s which use a version 2 gearbox, but we only recommend this part for experienced techs and those in the know when it comes to Airsoft internal upgrades. The ETU is also pre-wired to a Deans/T-Plug battery connector in rear wired configuration and spade connectors for your motor, so you shouldn't need your soldering iron!

If you want tighter groupings and more range, you're not alone! Thankfully, Maple Leaf is here to make your AEG shoot like a laser beam with the OHM Silicone AEG HOP-Up Tensioner; Solid Edition. This HOP-up nub/tensioner is ideally paired with a Maple Leaf HOP-up bucking and like much-lauded "Flat HOP" nubs, is designed to provide a stronger HOP-up effect for heavy-weight BBs and to reduce side-to-side shot deviation, improving accuracy and range as long as you do your part.

The OHM Solid Edition is available in two different hardness degrees, 50° for standard FPS and BB weights and 80° for heavy BBs (0.32g+) and DMR FPS levels. The Solid Edition differs from the Hollow Edition in its solid form which prevents the tensioner from deforming when used with heavy BBs travelling at high velocity. The inner surface of the OHM is also concave, making it the perfect pairing for Maple Leaf buckings with concave contact patches.

Whether you're working on a DMR build or accurising your primary AEG, the Maple Leaf OHM Silicone AEG HOP-Up Tensioner; Solid Edition will give you the performance you need!