- Programmable MOSFET/ETU
- Burst mode, binary trigger, pre-cocking
- Compatible with M4/AR-15 AEG with V2 gearbox
If you are looking for an affordable way to add advanced functionality to your M4/AR-15 AEG, this is worth a look! The Delta Armory Programmable ETU Processor Unit for V2 Gearbox replaces your conventional trigger assembly and offers burst mode, binary trigger and pre-cocking, all of which can be programmed in using the fire controls of the AEG itself.
This ETU should fit most M4/AR-15s which use a version 2 gearbox, but we only recommend this part for experienced techs and those in the know when it comes to Airsoft internal upgrades. The ETU is also pre-wired to a Deans/T-Plug battery connector in rear wired configuration and spade connectors for your motor, so you shouldn't need your soldering iron!
Fast Delivery
Delivery & Postage
Here at Patrol Base we ship worldwide, delivering not only to the UK but to most of the EU and select Worldwide locations as well. We provide a working day-by-road service via our handpicked courier services, simply buy your Airsoft guns with us and we'll have them delivered directly to your door.
For more information and to see the country we deliver please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change and are only a rough guide. For a more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£6.95
Approx.
UK Next Day
£8.95
Approx.
Highlands / Islands
£24.99*
Approx.
Saturday
£14.95
Approx.
* Scottish Highlands, Islands, and EU post prices can vary wildly. Prices range from £8.99 to £29.99, so please ensure you refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be delighted with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
The Delta Armory ETU is a great way to add advanced functionality to your M4/AR-15 AEG, along with improving trigger response, raising rate of fire and ensuring excessive semi-automatic use will not corrode your trigger contacts. The unit replaces the trigger switch and wiring assembly of your M4/AR-15 AEG and is pre-wired to a Deans/T-Plug battery connector in rear wired configuration. The "spade" motor connectors are also pre-wired, meaning you shouldn't need your soldering iron for installation.
When installed, the Delta Armory ETU provides programmable fire controls, with various modes which can be set using the trigger and fire selector of your M4/AR-15 AEG. Available modes include 3-round burst, 5-round burst, binary trigger and pre-cocking, giving you loads of options to play with along with the standard improvements in electrical efficiency provided by an electronic trigger.
The user manual of the ETU comes in the form of a QR code sticker pre-fitted to the wiring harness which can be scanned to access detailed instructions. As with all internal upgrade parts, we only recommend this part for users familiar with M4/AR-15 AEG internals and willing to carry out potential modifications.
Features
- Programmable MOSFET/ETU Modes:
- Burst mode - 3 or 5-round burst
- Binary trigger - One shot on trigger pull, one shot on trigger release
- Pre-cocking - Positions the piston at the rear before each shot for improved response
- Compatible with M4/AR-15 AEGs with a version 2 gearbox
- Pre-wired to motor spade connectors - No need to solder
- Rear wired: Deans/T-plug battery connector
- QR Code user manual - Scan the code on the wiring harness for instructions
- Recommended only for experienced techs - May require mods to fit certain gearbox shells
Package Includes
- Delta Armory Programmable ETU Processor Unit for V2 Gearbox
Specification
General
|
Internal Part Type
|
MOSFET
|
|---|---|
 |
 Custom Parts
This ETU and MOSFET set is only compatible with version 2 gearboxes
|
Part Specific
|
Part for Power Source Type
|
Electric
|
|---|---|
 |
|
|
Package Includes
|
MOSFET
|
Electric Part Specific
 |
V2 Gearbox
|
|---|---|
|
Gearbox Version Compatibility Variant
|
Version 2
|
Size guide
Parts Fitting
Upgrades and Downgrades should only be undertaken by experienced players, or Airsoft Technicians. Please note, changing any internal parts of a weapon voids its warranty unless done in-house by our staff.
Please ensure that when fitting parts the part purchased is the correct part, as once a part has been fitted we cannot accept return.
We do know that players love to tinker, so we're here to give you help should you require it, and if needed you can get in touch with our workshop for more help!
Unique Parts
Please note that some parts may be unique to a specific brand of weapon. For example: Parts for an ASG M4A1 may not fit an ICS M4A1.
Parts from the same brand typically have a high chance of fitting, though be warned, some replicas use unique parts, so please ensure the part will fit before you attempt to fit it.
If you require help with fitting any parts feel free to get in touch with us via our Contact Us Page.
For more information with fitting parts, or should you require help, feel free to get in touch with our Workshop Department via our Contact Us Page.
Terms and Conditions relating to parts fitting can be read on our Terms and Conditions Page.