Refine results
Refine by
Viewing 90 of 155.
grid
list
£7.99
  • Hollow Center
  • Very Secure Fitting
  • Fits Any 20mm Rail

Built to last! Very secure when installed onto your Airsoft Gun's 20mm RIS / RAS rail sections. Provides a comfortable grip on the front of your Airsoft Guns. 

£7.99
  • Stippled
  • Low Profile
  • Small Compartment

A low profile ergonomic & stippled grip constructed from Polymer for attaching to Airsoft 20mm RIS rail systems.

£7.99
  • Angled Grip
  • For 20mm Rails
  • Textured Surface

A Polymer constructed Angled Foregrip for 20mm Rail Systems, which provides a comfortable point to achieve a strong grip over your Airsoft Gun.

£7.99
  • For 20mm Rails
  • Textured Surface
  • Easy to Use Screw

A Polymer constructed Foregrip for 20mm Rails, which will easily attach to your Replica and provide a stable position to brace your gun against the shoulder, and achieve a steady and consistent aim. It could also reduce fatigue experienced during a skirmish from an incorrect hand position. The low-profile nature of this grip reduces the likelihood of snagging on your own kit/equipment during the day.

£7.99
  • Spring Loaded
  • Bipod/Foregrip
  • Side 20mm Rails

This Grip & Bipod combination unit is designed for Airsoft Guns with a 20mm RIS/RAS/Picatinny Rail Systems, and serves to provide a stable position to Grip your gun and achieve steadier aiming. Not only this, but at the press of a button a Bipod will deploy out the bottom for stable prone shots. It also has two side 20mm Rails for attaching further accessories, such as Lasers and Lights.

£7.99
  • For 20mm Rails
  • Quick Installation
  • Pressure Pad Slot

A Foregrip for 20mm Rail Systems, that will install anywhere on 20mm RIS/RAS and provide a comfortable and stable point to grip your replica. The Grip has a cutout on the side for Pressure Pads, should you be running a Torch or Laser. The Grip is easily installed onto Rails by pulling down the Spring-Loaded Tabs at the top of the Grip and sliding it into position. With ridges on the externals, this Grip offers a great hold even when wearing gloves.

£7.99
  • Textured Surface
  • Finger Groove Inserts
  • Quick Release Baseplate

This Pistol Grip is designed for AR/M4 Platform Airsoft Electric Guns, and is an ideal upgrade or replacement for a Pistol Grip that is either not comfortable, doesn't look cool, or is damaged.

£8.49
  • Swept-back vertical foregrip
  • Full length or short available
  • For 20mm Picatinny rails

If you prefer the tried and tested vertical foregrip over other gripping options but want something a little more modern than the average VFG, the Specna Arms Angled Vertical Foregrip may be just what you have been looking for! This grip can be attached to any 20mm Picatinny rail surface and features a slightly swept-back angle, intended to encourage a more comfortable wrist position whilst still making use of the advantages of a traditional vertical foregrip.

£8.99
  • Textured Grip
  • Finger Ridge Design
  • For AK47/74 Platform

A replacement pistol grip for AK Platform weapons, such as the AK47 and the AK74. The grip itself is constructed from lightweight polymer.

£8.99
  • Textured Surface
  • KeyMod Rail Foregrip
  • Low Profile Compact Grip

A short and compact KeyMod foregrip, designed to be attached to KeyMod Railed Hand Guards to provide an additional control when handling your Airsoft weapon. 

£8.99
  • Vertical Foregrip
  • Bottom Screw Tightens
  • Tightly Locks into Place

A Vertial Foregrip designed to give the user an extra control point on their weapon. The foregrip is constructed from Polymer and is designed to fit 20mm RIS / RAS Rails. 

£8.99
  • Folding Foregrip
  • Side Screw Tightens
  • Tightly Locks into Place

A very easy to use fore grip that can be locked in a compact or full vertical position depending on your situation and requirements. 

£8.99
  • Ergonomic
  • Fits Many Brands
  • High Density Polymer

A Polymer constructed and ergonomic upgrade/replacement pistol grip for many brands of Airsoft Electric AK platform replicas.

£8.99
  • Textured Surface
  • Ergonomic Grooves
  • Rubber Construction

A set of Rubber Pistol Grips for Army Armament 1911 Gas Blowback Pistols, which comes as a one-piece design as seen on the R32, and are very easy to install. Simply undo the screws holding your current Pistol Grips into place (carefully removing them as there may be springs on the underside) and install the new set from the front.

£8.99
  • CNC Machined
  • Reinforce Stock
  • Repair Broken Stock

Have you got an Ares Amoeba AM-13/14/15 with a broken stock, or want to reinforce your stock before damage happens? This CNC Machined part from Airtech Studios is designed to reinforce the weak stock plate, and allow you to continue using a broken one without the need for a new stock.

£8.99
  • Angled Fore Grip
  • Raised Plate Included
  • Strong, Durable Polymer

A Lightweight and durable AFG-1 Style Angled Foregrip, designed to provide increased handling and control of your Airsoft Gun.

£8.99
  • Angled Fore Grip
  • Thumb / Finger Rest
  • Strong, Durable Polymer

A Lightweight and durable Extended AFG Style Angled Foregrip, designed to provide increased handling and control of your Airsoft Gun.

£8.99
  • Angled grip
  • High-density polymer construction
  • Shorter than most - Perfect for short rail systems

The CQB Front Grip from Big Dragon is designed to provide increased weapon control for those who prefer not to use vertical foregrips. This grip enables modern shooting grips such as the C-Clamp and gives the user a low profile, snag-free solution which assists rapid transitioning from target to target.

£9.99
  • For KeyMod Rail
  • Lightweight Alloy
  • Hand Stop Mount

A KeyMod panel, designed to be attached to Handguards and provide a Hand Stop point, using it to stop your hand from sliding in front of your Airsoft gun's muzzle.

£9.99
  • Angled Fore Grip
  • Raised Plate Included
  • Strong, Durable Polymer

This lightweight and durable angled fore-grip is a replica built on the AFG1 Style, designed to allow more reliable control of your weapon.

£9.99
  • Ambidextrous
  • Modular Design
  • Improve Comfort

An Airsoft handstop for M-LOK rail systems, constructed from flexible Polymer and with two sizes of handstop to choose from. 

£9.99
  • Ergonomic Design
  • Promotes Natural Grip
  • Internal Storage Compartment

An ergonomically designed 20mm RIS foregrip, created to promote a comfortable and natural grip on their Airsoft gun. Constructed from high quality polymer with a slightly textured surface.  

£9.99
  • 20mm RIS Compatible
  • Spring Powered Bipod
  • Press Button To Deploy

A vertical foregrip for 20mm RIS rails with a built-in spring-powered foregrip which will deploy at the press of a button.

£9.99
  • Simple To Install
  • Eliminate Wobble
  • Increased Comfort

A small Alloy shim for an ASG Scorpion Evo 3 A1 which will completely eliminate any wobble and/or rattle from the stock, for a much more solid shooting experience.

£9.99
  • Sliding Stock
  • QD Sling Sockets
  • For AR Platforms

A Polymer constructed Sliding Stock for AR Platform Airsoft Guns that have an AEG Buffer Tube. Simply slide this over the Buffer Tube to replace your current stock, but ensure your Battery can happily fit down your Buffer Tube, as there is no excess Battery Space inside. The rear of the Stock has a Rubber Butt Pad for extra grip in the shoulder, and a set of QD Sling Sockets for the attachment of Quick Release Slings.

£9.99
  • Vertical Foregrip
  • 20mm RIS Attachment
  • Rubber Textured Surface

A 20mm Vertical Foregrip for picatinny rails and RIS handguards, designed to fit onto your airsoft rifle and provide a secure, stable and comfortable point of aim, ideal for M4's, AK's and other standard size Assault Rifles.

£10.99
  • Easy Installation
  • Threaded End Cap
  • Aluminium Construction

An Aluminium constructed Buffer Tube for Airsoft Electric M4/M15/M16 replicas, which allows you to install a telescopic stock to have greater control over the length of the rifle.

£10.99
  • For LT-20 M82
  • 20mm RIS Mounted
  • Hinged Carry Handle

A 20mm mountable Carry Handle for the Lancer Tactical LT-20 M82 Sniper Rifle which helps complete the look, as the real rifle is seldom seen without it.

£10.99
  • Tactical Grip
  • Better Handling
  • CQR Style Aesthetic

A Tactical Foregrip designed to fit onto your Assault Rifle and provide a secure and stable handling surface. The grip slips straight onto a 20mm rail and features a pistol grip style shape.

£10.99
  • Real wood grips
  • For WE 1911 series GBB pistols
  • Add a touch of additional class to your 1911!

If you want a more refined look for your 1911 gas blowback pistol, this will be of interest. The 1911 Wood grips from WE are constructed from real wood, and are a simple drop in installation on WE 1911 pistols. The grips have a visible grain and a natural wood finish, allowing you to stain these to match your personal preference, or just leave them as they are! Separate yourself from the EU and Hi-capa wielding plebs by making your 1911 even more distinct and classy!

Explore Airsoft M4 stocks, angled foregrips, folding stocks & more

Looking for something to make your airsoft gun stand out? We have a range of airsoft grips and stocks designed for both looks and functionality, from easy-to-adjust M4 stocks to angled foregrips with built in lasers.

We have a range of replacement grips and stocks for AEG, gas blowback and HPA Airsoft replicas - whether you’re opting for something more compact, heavy duty or something with a finger ridge, we have what you’re looking for. You’ll find plenty of Airsoft foregrips in our collection, including options compatible with our KeyMod rails

Shop all of our airsoft grips and stocks online today for next day delivery. You can also shop our other collections, like our range of M4 rifles.