Refine results
Refine by
Viewing 30 of 36.
grid
list
£4.99
  • Aluminium
  • For 20mm Rails
  • Offers Sling Loop

An Aluminium constructed sling point for 20mm RIS rails, which allows you to install a sling at any location on your rail system.

£5.99
  • Easy to Fit
  • Ambidextrous
  • For M4 GBB / PTW

A Sling Plate designed to fit on M4 Style Airsoft 6mm BB Guns, fitting on GBB Gas Blowback Rifles between the Receiver and the Buffer tube allowing the attachment of Slings. 

£5.99
  • Black In Colour
  • Alloy Construction
  • Replacement Sling Mount

An official spare sling hook, allowing for the replacement of the lost or broken part of your Airsoft Scorpion Evo. 

£5.99
  • 5 Positions
  • Easy To Rotate
  • Polymer Construction

The perfect mount for your torch, able to fit to any 20mm RIS/RAS rail and with 5 adjustable positions.

£5.99
  • For QD Slings
  • Alloy Construction
  • MLOK Rail Compatible

An Alloy sling point for QD push-fit slings, which attaches to MLOK rail systems allowing you to use two and three-point sling setups with your weapon.

£7.99
  • Easy to Fit
  • For AK AEG
  • One Sling Point

A high strength sling plate constructed from a dense Alloy that allows you to attach a sling to your AK47 platform weapon.

£7.99
  • 2x Scope Mounts
  • Alloy Construction
  • Low Profile Mounts

Mount your scope lower to your rail and outer barrel for improved accuracy down range. Two mounts per box allows you to hold a scope tube diameter up to 1 inch wide. Tools are also included to aid in assembly and setup.

£7.99
  • QD Sling Socket
  • Angled Sling Mount
  • For M-LOK & KeyMod

An angled QD Sling Socket which can be attached either to an M-LOK or KeyMod Rail System using the included bolts, allowing you to use a more personalised QD Sling setup.

£8.99
  • Easy to Fit
  • For AK AEG
  • QD Sling Point

A high strength QD sling plate constructed from a dense Alloy and weighing in at 40g that allows you to attach a sling to your AK47 platform weapon, freeing up your hands to task on extra tasks during Airsoft skirmishes.

£9.99
  • For KeyMod Rail
  • 45 Degree Mount
  • Lightweight Alloy

A section of 20mm RIS rail which can be mounted onto a KeyMod handguard at a canted, 45° angle, allowing the installation of accessories such as back up ironsights or miniature red-dot reflex sights. 

£9.99
  • Tool-Less Fitting
  • Offset Scope Mount
  • 30mm Diameter Ring

A Scope Mount designed for Airsoft Sights and Scopes which offsets Sights and Scopes allowing their Eye relief to be adjusted even with minimal rail space. 

£9.99
  • High Profile Mounts
  • Raise Low Profile Scopes
  • Perfect For Full-Face Masks

A pair of 20mm RIS compatible raised scope mount rings, designed to raise up optics to the user's eye-level, or fit larger scopes onto their Airsoft guns. 

£9.99
  • Easy To Install
  • 20mm RIS Sight Rail
  • Full Metal Construction

A very easy to install 20mm RIS Rail that replaces the rear iron sight on your Airsoft AK47/74 rifle, allowing users to mount whatever optics or sights they want on the AK. 

£9.99
  • Easy To Mount
  • 25mm Diameter
  • Attaches to 20mm Rail

A set of low profile alloy scope rings of 25mm diameter that attach to 20mm RIS/RAS rails. 

£9.99
  • For M14/M1A
  • 20mm RIS Rail
  • Secure Mounting

An Alloy constructed mount for the M14/M1A platform, which secures above the ejection port via the threads on the side of the receiver and allows you to mount 20mm compatible accessories/sights.

£11.99
  • Tool Free Fitting
  • 5'' / 12.5cm Long
  • Raises by 1'' / 2.5cm

Can be fitted to Airsoft Weapons to lift up Sights and Scopes making them easier to use with Full Face Protection and other Masks. 

£11.99
  • QD at Two Points
  • For 20mm RIS/RAS
  • Tough Construction

A truly quick release sling point which can be added to 20mm RIS/RAS rails for the easy addition of a sling, which can be removed at a moments notice both at the sling and mount.

£12.49
  • Quick Release Loop
  • Sling Plate Included
  • Ambidextrous Mount

An Alloy constructed sling loop for AR/M4/M16 platform Airsoft Electric Guns, which comes included with a replacement Sling Plate to mount the included Quick Release Offset Loop on either side.

£12.99
  •  Add 20mm RIS
  • Allows Mounting Optics
  • Fits M4/M16 Carry Handles

A sight rail which is compatible with 20mm RIS, designed to bolt into place on the carry handles of M4 and M16 type Airsoft guns, allowing users to install optics onto their guns. 

No reviews yet
£12.99
  • Tool-free Fitting
  • 5'' / 12.5cm Long
  • Raises by 1'' / 2.5cm

Ideal for Airsofters wearing full-face masks, wide goggles or simply using a very low-profile optic, this 1"/2.5cm high raiser block allows users to increase the height of their 20mm RIS rail mounted accessories to a more usable position. 

 

No reviews yet
£12.99
  • High Mount
  • A Single Mount
  • Additional Rails

A special mounting ring with three 20mm short rails on top and sides. Allowing additional accessories like lasers or lights to be attached.

£13.99
  • For KeyMod Rails
  • Alloy Construction
  • Included w/ QD Loop

An Alloy constructed sling mount for KeyMod rail systems, which comes included with a QD sling loop ready for any basic-clasp sling.

£14.99
  • For AK AEG / GBB
  • Fits onto Side Mount
  • Quick Release Design

A combination scope and side rail 20mm RIS rail mount designed to fit on both Airsoft Electric and Gas type AK Platform weapons which feature a side mount plate. 

£14.99
  • 20mm Sight Rail
  • Twist-type Fitting Lever
  • Fits Most AEG AK Types

High quality scope mount designed for AK series including 74, ak14 and AKM. With a 20mm rail you can attach a range of sights from ACOGS to sniper scopes.

£14.99
  • 6'' Rail space
  • Raised Optic Position
  • Compatible With Most M14 AEGs

A perfect way to mount an optic on to your Airsoft M14 AEG, with this side mounted, offset scope rail. 

£17.99
  • For MP5 / G3 Guns
  • Claw Mount Style
  • Top / Side Rail


A combination 20mm RIS rail sight mount and side 20mm RIS rail adaptor for Airsoft MP5 and G3 Style AEGs, which is designed to bolt over the top of the receiver. 

£18.16
  • 6 Bolt Securing
  • 30mm Diameter Tubing
  • 20mm RIS/Picatiny Compatible 

The perfect way to securely mount your scope onto your Airsoft gun, allowing you to get the best possible accuracy from your scope when aiming. 

£18.16
  • Quick Detach Mount
  • Tube Diameter 30mm
  • Compatible With 20mm RIS Rails

A 20mm RIS compatible scope mount ring, designed to enable users to mount VORTEX's high quality optics onto their Airsoft guns or real firearms.

£18.16
  • High Profile Mounts
  • Raise Low Profile Scopes
  • Perfect For Full-Face Masks

A 20mm RIS compatible raised scope mount ring, designed to raise up optics to your eye-level, or fit larger scopes onto your Airsoft guns.

£18.99
  • For ACOG Scope
  • Easily Removable
  • Release Without Tool

A replacement mount for ACOG style scopes, with a quick-detach mechanism for speedy attachment or removal.

From Sling Mounts to Sight Mounts and everything inbetween...

From Sling Mounts to Sight Mounts here at Patrol Base we have a range of Mounts designed to allow the attachment of different accessories where it may not have been previously possible.

If you're looking for a Sling Mount Plate we have a variety of different types, for different weapon playforms and styles, for Gas Blowback Rifles and Electric Rifles there are plenty to chose from.

If you can't find something that you like, or want something which isn't on the website why not contact us via Phone and we can do our best to source it for you!
Telephone: 01484 644709