Airsoft Rifle Magazines

If you are loading up on magazines for your M4/AR15 AEG then you will want to check out the Q-Mag from NUPROL. This attractive-looking polymer magazine holds 150 BBs and can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod/tool. This magazine is designed with a crackle texture on the exterior which is useful for drawing the magazine from pouches, but also allows the mag to be used as an improvised grip to help you get the best shooting position when things get tight. This magazine is compatible with most Airsoft M4/AR15 AEGs, and is a spring loaded mid-cap, which means no battle rattle to give you away!

With the NUPROL 1200rnd Electric drum magazine, you will have all the firepower necessary to deal with the foes on the battlefield. A massive drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to push back any opponents who dare challenge you.

This drum magazine is constructed from high-density polymer and is the first of its kind for the NGRS system! If you miss the mega capacity of a high-capacity wheel-wound magazine, this is leagues above that. More BBs, more hits... right?

Please note, this drum magazine is ONLY compatible  with Tokyo Marui NGRS (Next Generation Recoil Shock) AEGs.

A Steel high capacity clockwork magazine for AR-15 / M4 models of Airsoft Electric Gun, that will fit and feed in 95% of M4 based Airsoft guns.

If you are loading up on magazines for your M4/AR-15 AEG then you will want to check out the H-Mag from NUPROL. This high density polymer magazine holds 150 BBs and can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod/tool.

This magazine is designed with hexagonal texture on the exterior which adds grip and makes them easier to handle while also adding a touch of modern styling, well suited to cutting-edge setups. This magazine is compatible with most Airsoft M4/AR-15 AEGs, and is a spring-loaded mid-cap, which means no battle rattle to give you away!

If you're involved in a mix of milsim and standard skirmishes, these are the mags for you! The ARCTURUS 30/130rnd EMM Variable-Cap Mag for M4/AR-15 AEG; 5 Pack is a great value set of 5 matching magazines, made from strong and light high-density polymer with a modern aesthetic. These magazines are designed for M4/AR-15 AEGs but should also work in most SCAR-L and L85 AEGs.

Each magazine is loaded through the fill/feed port on the top of the magazine body using a speed loader or loading rod. To adjust capacity, press the button on the centre of the baseplate and slide the baseplate forward and off the magazine. After this, slide the internals out through the bottom to access the capacity switch and choose between a realistic 30-round mag and a more competitive 130-rounder!

On the outside, these ARCTURUS magazines feature a "mag pod" style baseplate to be used as an improvised shooting support, texture and linear serrations for optimal traction and a witness window on each side so you can confirm your magazine's current round count. If you're looking for versatile, modern mid-caps to fill your rig, the ARCTURUS 30/130rnd EMM Variable-Cap Mag for M4/AR-15 AEG; 5 Pack is a superb option!

If you've got an M4 and fancy doing things a little differently try this 110-round pistol magazine. Its longer form makes it perfect for doubling as a foregrip and it leans into the pistol/carbine trend currently in the states. It's slimmer form factor also makes it easy to carry multiple of in your loadout. Constructed from tough but lightweight polymer, be aware that it will require a pistol magazine adapter to fit an M4/AR-15.

A medium capacity 110rnd capacity design with flare bottom to aid in speedy reloads, the mag can be loaded through the fill/feed port at the top of the magazine body using an Airsoft speed loader or loading rod.

If you're a fan of modern shooting techniques and rock around with an M4, AR-15 or SCAR-L, this magazine is just for you! The PTS Syndicate EPM 150rnd Mid-Cap Magazine w/ MultiTasker® Mag Pod Base Plate is perfect for realism seekers as the base plate included is designed for real steel magazines but they are also compatible with Airsoft magazines.

The BB guide of the magazine is coloured bright orange, allowing you to see the number of BBs remaining, from the top, side and lower part of the magazine. You can pick up the mag and know exactly how many BBs are remaining. It is constructed from tough DuPont Zytel Polymer, making it extremely durable and robust with a great finish.

The advantage of the MultiTasker® Mag Pod Base Plate is the ability to use your magazine as a makeshift bipod, providing improved stability so you can nail those long-range shots. Adding a bipod adds a lot of weight to the front end but the Mag Pod Base Plate should give you some of the functionality but none of the weight. If you're running a light and handy assault rifle seeking more stability without extra weight.

An Airsoft magazine designed for use with Tokyo Marui's STANAG accepting Recoil Shock range, with a design based upon the STANAG standardized magazine used by NATO forces.

If you're looking for high quality mid-caps with a more realistic look than EPM mags, the EMG 210rnd Troy BattleMag Magazines for M4/AR-15 AEGs; 2 Pack should suit you perfectly! Like EPM mags, these have a whopping capacity of 210 BBs, many more than other standard-length mid-caps but unlike EPMs, these mags are patterned after the real steel Troy BattleMag magazine and officially licenced by Troy through EMG. Perfect for the realism fans!

Just like the real BattleMag, the flanks of the mag body boast snake scale style texture for enhanced traction and a rubber magazine pull assist on the bottom for improved control during fast reloads. The pull assist is also useful for pulling the mags out of tight pouches, giving you a bit extra to hold into to speed up your reloads. 

Loading the BattleMag is the same process as other Airsoft mid-caps; through the fill/feed port on the top of the magazine body using an Airsoft speed loader or loading tool. The massive capacity may make this mag difficult to load using ODIN or similar loaders when the mags are new, so we recommend bedding the magazine in before using a crank wound loader by filling it up with a thumb plunger loader and emptying it a few times. If you want your magazines to be as realistic as your primary, the EMG Troy BattleMag 2 pack is what you need!

If you are looking for magazines, BBs and a Speedloader for your M4/AR-15 platform AEG why not get them all in one? The Lock 'n Load Bundle combines a 1KG bulk bag of our favourite BB weight for outdoors skirmishing, 0.28g from Delta Armory, 2 x NUPROL Adjustable capacity M4/AR-15 AEG magazines and a Delta Armory 100rnd Speedloader.

NUPROL's magazine should work in the vast majority of M4/AR-15 platform AEGs and gives you the choice of running them as real cap 30rnd mags or 140rnd mid-caps for when realism comes second to firepower. Whether you attend Milsim events or just regular walk-on skirmishes, this pack should see you well-equipped for battle!

If you need affordable Mid-cap magazines for your M4/AR-15 AEG you're going to want to check this out! The Delta Armory 120rnd DMAG Mid-cap Magazine is designed to fit M4/AR-15 AEGs and is styled after a well-known polymer real steel magazine, complete with waffle-style gripping texture.

The magazine is loaded just like any other Airsoft mid-cap, through the fill/feed port at the top of the magazine body using a speed loader or loading tool. The magazine is also marked on either side with the capacity (120) and the Delta Armory logo. If you need cheap M4 mags to complete your loadout, this is as cheap as they come!

The world's best Airsoft Magazine just got better! Made to a seriously tough standard using excellent materials, the EPM-1 Magazine holds a massive 250rnds in a Spring-Fed Mid-Cap design. This means that you still get the incredible feeding performance of a PTS Mid-Cap, but with a capacity that can rival most High-Cap Magazines!

Having a high-cap magazine handy may ruin your discrete advance with a bit of "battle rattle", but nothing beats the absolute storm of fire you can lay down with one of these on your AEG! The 320rnd Steel High-cap Magazine from CYMA is patterned after the real M4/AR15 STANAG magazine, with a steel shell and realistic reinforcement ribs on the outside. This magazine is a wheel wound high-cap mag, and the winding wheel can be found on the baseplate, and the fill window is located on the top of the magazine. This mag is compatible with any standard M4/AR15 AEG rifle, as well as L85 AEG rifles, 416 series AEGs and SCAR-L AEGs.

Another excellent quality product from PTS, a 170rd Mid Cap magazine for those of you looking for a more low profile but reliable magazine option.

Another excellent quality product from PTS, a 170rd Mid Cap magazine for those of you looking for a more low profile but reliable magazine option.

If you are looking for M4/AR-15 AEG magazines that are a cut above the rest, the PTS Syndicate 150rnd EPM Gen.2 Enhanced Polymer Magazine is the one to go for! This is the Gen.2 version of the EPM, building on the superb design of the original by adding improved gripping texture on the exterior, compatibility with Magpul MAGLINK® magazine couplers and a new, more rigid Zytel polymer baseplate.

Like the usual mid-cap magazine, the EPM Gen.2 is loaded through the fill/feed port at the top using an Airsoft speed loader or loading rod/tool and has no battle rattle whatsoever, making it great for milsim inclined skirmishers and those who prioritise stealth when skirmishing. All of the enhancements from the original EPM design have been retained, including the magazine well guides at the top of the shell which eliminate wobble, the witness window showcasing mock cartridges with a clear section to confirm the mag is fully loaded and the high visibility orange follower so you can confirm when your mag is empty.

With a wide range of compatibility, a high-strength compression spring and Dupont Zytel polymer construction, you would be hard pressed to find a better magazine for M4/AR-15 AEG compatible platforms!

If you are looking for M4/AR-15 AEG magazines that are a cut above the rest, the PTS Syndicate 150rnd EPM Gen.2 Enhanced Polymer Magazine is the one to go for! This is the Gen.2 version of the EPM, building on the superb design of the original by adding improved gripping texture on the exterior, compatibility with Magpul MAGLINK® magazine couplers and a new, more rigid Zytel polymer baseplate.

Like the usual mid-cap magazine, the EPM Gen.2 is loaded through the fill/feed port at the top using an Airsoft speed loader or loading rod/tool and has no battle rattle whatsoever, making it great for milsim inclined skirmishers and those who prioritise stealth when skirmishing. All of the enhancements from the original EPM design have been retained, including the magazine well guides at the top of the shell which eliminate wobble, the witness window showcasing mock cartridges with a clear section to confirm the mag is fully loaded and the high visibility orange follower so you can confirm when your mag is empty.

With a wide range of compatibility, a high-strength compression spring and Dupont Zytel polymer construction, you would be hard pressed to find a better magazine for M4/AR-15 AEG compatible platforms!

The latest edition of the world's best Airsoft Magazine! Built for ultimate performance and durability, the EPM1RX Magazine from PTS Syndicate holds a massive 250 rnds in a Spring-Fed Mid-Cap design. This means you get the superb feeding performance of a Mid-Cap, but with a generous capacity that rivals most High-Cap Magazines!

The latest revision of this magazine includes brand new tooling for the internal shell, which leads to more precise dimensions and a smoother BB channel. Perfection just got even better! If you want only the best of the best for your favourite M4 AEG, HPA adapter or Maximus kit, you need to treat it to some PTS Syndicate EPM1-RX 250rnd Magazines.

A Mid-Cap Magazine for M4/M16 Platform Airsoft Guns, which is made with a Steel Outer Shell to make it tough, well weighted and realistic. It has a 'stubby' design as seen in the M16s of the Vietnam War Era, and is a Spring-Loaded design which will feed all the BBs until empty without the need for winding. This is ideal for DMRs or Period Replicas, or for anyone who wants Mid-Cap Magazines that are low profile and won't get snagged on your kit as much as full size ones.

If you need more ammo between reloads, a high-cap magazine will do the trick! The Delta Armory 300rnd High-Cap Magazine for M4/AR-15 AEGs is styled after a famous polymer magazine, making it well suited to any modern M4/AR-15 AEG build. As with other high-cap mags, the winding wheel is located on the baseplate and the fill window is on the top.

To load the mag, simply open the hatch on top, pour your BBs in, wind the winding wheel 5-10 times, insert the mag and you're ready to shoot! If you prefer putting down rounds over reloading, a couple of these will give you what you need!

If you need more capacity but don't want to carry 10 mags, the Delta Armory 300rnd Steel High-Cap Magazine for M4/AR-15 AEGs will keep you sweet! This wheel-wound high-capacity magazine holds 300 BBs and replicates the real steel NATO STANAG 30rnd mag with its stamped steel shell. Compatibility-wise, this mag should fit in the vast majority of M4/AR-15, SCAR-L and L85/SA80 AEGs. 

Like other Airsoft high-caps, this magazine is loaded through the fill window on the top of the magazine body. First, pull open the hatch, then pour your BBs in. With this done, wind the winding wheel on the baseplate to tension the mag and you're ready to rock. If you need more capacity but don't want to compromise agility with a rig full of magazines, the Delta Armory 300rnd Steel High-Cap Magazine for M4/AR-15 AEGs is what you need!

If you need affordable Mid-cap magazines for your M4/AR-15 AEG you're going to want to check these out! The Delta Armory 130rnd STANAG Mid-cap Magazine is designed to fit M4/AR-15 AEGs and is styled after the STANAG magazine, a standard issue magazine for M4, L85/SA80, SCAR-L, HK416 rifles used in NATO militaries, amongst many others. 

The magazine is loaded just like any other Airsoft mid-cap, through the fill/feed port at the top of the magazine body using a speed loader or loading tool. If you need cheap M4 mags to complete your loadout, this is as cheap as they come!

If you are looking for magazines for your Double Eagle or Tokyo Marui MWS GBBR; you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR, but should work with original Tokyo Marui M4 MWS System GBBRs too - unlike other Double Eagle gas magazines.

The mag is constructed with a durable alloy shell and internals. It is loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is at the bottom of the magazine, on the baseplate, and the mag is compatible with both green gas and red gas.

It holds 35 BBs, making it perfect for those who seek realism. As with the original TM and Double Eagle GBBR magazines, these mags include the bolt stop components which lock the bolt open at the end of a mag, further adding to the realism of the Double Eagle Noveske N4 MWS ZET System GBBR!

EMG have teamed up with Lancer Systems to bring you a fully trademarked and licensed .300 blackout style magazine to give your Airsoft M4 some serious style points. The mag features an ultra modern aesthetic with the following trademarks:

• '.300 BLACKOUT'
• 'L5-AWA'
• 30BLK
• LANCER SYSTEMS
• 20 / 30

The mag is a mid cap that holds 190 rounds, which is a very large capacity for a mag of this type and features no 'battle rattle unlike high-cap magazines. The mag is constructed from translucent polymer, revealing the mock cartridges within for additional realism. Gripping the mag is no issue thanks to the raised stippled texture and grid pattern to make reloading as quick and easy as possible.

If you need affordable mags for your M4 but insist on maximum realism, the Delta Armory 130rnd STANAG Mid-cap Magazine for M4/AR-15 AEG is ideal. Unlike similarly priced Mid-cap magazines, this mag is constructed with a realistic stamped steel shell, holding 130 BBs loaded through the fill/feed port on top using a speed loader or loading tool. 

Compatibiity-wise, this is in every way a standard M4/AR-15 AEG mid-cap and should work in the vast majority of M4, SCAR-L and L85 AEGs. If you're a few mags short of a full loadout, the Delta Armory 130rnd STANAG Mid-cap Magazine for M4/AR-15 AEG is a great way to tool up on the cheap!

If you need affordable mags for your M4 but insist on maximum realism, the Delta Armory 130rnd STANAG Mid-cap Magazine for M4/AR-15 AEG is ideal. Unlike similarly priced Mid-cap magazines, this mag is constructed with a realistic stamped steel shell, holding 130 BBs loaded through the fill/feed port on top using a speed loader or loading tool. 

Compatibiity-wise, this is in every way a standard M4/AR-15 AEG mid-cap and should work in the vast majority of M4, SCAR-L and L85 AEGs. If you're a few mags short of a full loadout, the Delta Armory 130rnd STANAG Mid-cap Magazine for M4/AR-15 AEG is a great way to tool up on the cheap!

EMG has teamed up with Lancer Systems to bring you a fully trademarked and licensed 5.56x45mm style magazine to give your Airsoft M4 AEG some serious style points! The mag features an ultra-modern aesthetic with the following trademarks:

• '5.56x45mm'
• 'L5-AWA'
• 30BLK
• LANCER SYSTEMS
• 20 / 30

The mag is a mid-cap that holds 190 rounds, which is a very large capacity for a mag of this type and features no 'battle rattle unlike high-cap magazines. The mag is constructed from a translucent polymer, revealing the mock cartridges within for additional realism. Gripping the mag is no issue thanks to the raised stippled texture and grid pattern to make reloading as quick and easy as possible. As with other mid-cap mags, a speed loader or loading tool is required to load the mag and loading is carried out through the fill/feed port at the top of the magazine body. If you're working on a 5.56x45mm-themed build and need modern magazines, these are perfect!

If you are Milsim-curious and occasionally give skirmishing a go with real-cap magazines, the ARCTURUS 30/130rnd Variable-Capacity Magazine for M4/AR-15 AEG is the perfect mag to fill your rig with. These magazines have adjustable capacity, meaning you can switch between a realistic 30-round capacity and a more skirmish-friendly 130-round capacity. Like a standard mid-cap, these mags are loaded through the fill/feed port at the top of the magazine using an Airsoft speed loader or loading tool.

To switch capacity, simply remove the screw retaining the baseplate, slide the internals of the magazine out through the top and flick the switch on the magazine's internal shell. Being styled after real steel STANAG magazines, these mags are compatible with most M4/AR-15, SCAR-L, 416 and SA80 AEGs and are constructed with an authentic steel shell with reinforcement ribs stamped on each side. If you fancy giving Milsim a try but you aren't ready to commit, these mags are a great place to start!

If you need a high-quality magazine for your M4/AR-15 AEG, you are in luck! The Novritsch 225rnd Magazine is the gen.2 model of Novritsch M4 magazines and comes with some new refinements and improvements. It comes with a monopod baseplate, perfect for shooting from a prone position. It also has a number matrix on the bottom so you know which magazine you're using.

There is also a viewing window on the side of the magazine so you know when you're running short on BBs. The baseplate is also easily removable and the internal magazine can be removed for easy maintenance and cleaning. This magazine is the perfect choice for any skirmisher who is looking for a reliable and consistent performance!

If you're looking for NATO STANAG-style M4 magazines, this should suit! The Specna Arms 300rnd High-Cap Magazine for M4/AR-15 AEGs is a wheel-wound high-cap magazine with a realistic steel shell and polymer internals. To load the mag, simply open the fill window at the top and pour BBs in. When filled, you can wind the wheel on the baseplate 5-10 times or until the noise changes to tension the mag. 

Compatibility-wise, this mag should work with most M4/AR-15 AEGs out there, along with L85, SCAR-L and other M4 AEG mag-compatible platforms. If you prefer not to use a rig but need capacity to compete, the Specna Arms 300rnd High-Cap Magazine for M4/AR-15 AEGs belongs in your magwell!