Airsoft Rifle Magazines

With the release of the J Series from Specna Arms comes their line of J Series Mags. If you own a J series and need some spare mags to go with your new beauty, you've come to the right place. Even if you don't own a J Series and fancy yourself a new ultra-modern magazine, you'd be hard-pressed to find a better mag than this.

This magazine is a mid-cap variant, meaning that it holds a medium amount and is filled at the top using a speed loader. Unlike high-cap mags there is no 'battle rattle' so if you're a more sneaky type of player mid-cap mags are for you.

The magazine is constructed from high-density polymer and features a matte colour and a somewhat rough texture with additional friction for a satisfying feel and ease of loading. On either side of the mag, you can see a modern checked texture for the modern battlefield

If you're planning on running your GBBR through winter or fancy mag dumping like it's going out of fashion without the dreaded "cooldown" effect, the Army Armament HPA P30 Adapter for M4/AR-15 AEG Magazines; CGS/MWS System is what you need! 

A collaborative project between Army Armament and T8 Systems, this HPA adapter is designed for the Tokyo Marui M4/AR-15 ZET System and the CYMA CGS M4/AR-15 GBBR series, allowing standard AEG mags to be used along with a High Pressure Air (HPA) power source. The set includes both an EU and US HPA connector but you will need an airline, HPA bottle and regulator to run this adapter. 

The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. If you're already running HPA you probably have all the bits to make this work already and experience shoulder-thumping recoil through the frosty months!

If you have an ARCTURUS AK in your arsenal and need some spare magazines for the battlefield, look no further! The ARCTURUS 30/130 Adjustable Mid-Cap for ARCTURUS AK Platforms is constructed from high-density polymer with a steel feed spring, designed to match the style of the real steel AK-12 5.45x39mm magazine.

On either side of the magazine, we have a grippy, ribbed design and mock witness windows designed to check rounds remaining in its real steel counterpart. The steel baseplate is also angled to allow for "mag-podding". Compatibility-wise, this mag will work with ARCTURUS AK AEGS; other brands' compatibility cannot be guaranteed.

The magazine's capacity can be adjusted from a real capacity of 30 to a more fitting capacity for Airsoft, of 130 rounds. To adjust it, remove the magazine from the shell, and there is a switch that can be moved, one side for 30 rounds and one side for 130 rounds.

If you need the best mags around coupled with the best BBs, here you go! The Elite Lock 'n' Load bundle pairs 2 of the best AR AEG mags around, the PTS EPM 1 250rnd Mid-cap with the best BBs out there, G&G's Competition Grade 0.28g BBs. If you run a high performance M4/AR-15 AEG platform, this bundle was made with you in mind!

For those of you looking for a mid-cap magazine with a modern and realistic style with calibre engravings, this is the mag for you!

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a checked ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout. It also features calibre engravings on the right hand side for additional realism and style.

For those of you looking for a mid-cap magazine with a modern and realistic style with calibre engravings, this is the mag for you!

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a checked ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout. It also features calibre engravings on the right hand side for additional realism and style.

This Steel constructed 150rnd Magazine is designed for AK Platform variants and features a Mid-Cap design, meaning that it will feed until empty and doesn't make any 'rattle' sound like High-Cap designs. Beautifully replicating the Steel Waffle mags that are often seen in the traditional AKM models, this Magazine is eye-catching and looks right at home on any flavour of the AK family.

If you're eyeing up one of the dazzling new Ares DMR rifles from the AR-308 range, or you own the Secutor Rapax DMR rifle, spare magazines are always handy! This box set includes 5x mid-cap magazines, each of which holds 130 BBs and can be loaded using a standard Airsoft speed loader through the fill/feed port at the top of the magazine body. These magazines are constructed from high density polymer with a rough textured finish, and the exterior design is patterned after a popular style of .308LR magazine, with reinforcing ribs on the exterior which also provide superb grip when handling the mag during a reload, and a "dot matrix" on either side so you can number your magazines for admin purposes.

If you're eyeing up one of the dazzling new Ares DMR rifles from the AR-308 range, or you own the Secutor Rapax DMR rifle, spare magazines are always handy! This box set includes 5x mid-cap magazines, each of which holds 130 BBs and can be loaded using a standard Airsoft speed loader through the fill/feed port at the top of the magazine body. These magazines are constructed from high density polymer with a rough textured finish, and the exterior design is patterned after a popular style of .308LR magazine, with reinforcing ribs on the exterior which also provide superb grip when handling the mag during a reload, and a "dot matrix" on either side so you can number your magazines for admin purposes.

A 20 Rounds Green Gas Magazine for the UMAREX Airsoft HK417D Gas Blowback Rifle.

If you're loading up on magazines and like them modern, the Novritsch 140rnd Mid-Cap Magazine for M4/AR-15 AEGs is ideal! This spring-loaded mid-cap magazine holds 140 rounds and can be loaded through the fill/feed port at the top of the magazine using a standard Airsoft speed loader.

Constructed with a strong polymer shell and steel feed spring, this mag won't rattle as you run like a high-cap would and is very easy to handle in wet conditions compared to steel-shelled STANAG magazines. Compatibility-wise, this mag should fit and feed in most M4/AR-15 and SCAR-L AEGs and also works well with the Novritsch SSR63A2 AR36 AEG. 

A 20 Round Green Gas Magazine for the UMAREX Heckler & Koch Gas Blowback G3A3 Rifle.

An Airsoft Magazine designed for use with Tokyo Marui's SCAR-H Recoil Shock range, with a design based upon the 7.62mm STANAG Standardized Magazine used by NATO Forces. 

An Airsoft Magazine designed for use with Tokyo Marui's SCAR-H Recoil Shock range, with a design based upon the 7.62mm STANAG Standardized Magazine used by NATO Forces. 

A spare or replacement magazines for SR25 or AR10 rifles which use the Classic Army/A&K style of magazine. This mag is filled via a speedloader through the feed port at the top of the mag. Perfect for the designated marksman who likes to challenge themselves with low/real capacity!

Grab yourself some spare mags for the lesser seen but extra-cool SG55x series Airsoft AEG rifle so you can show the AR users what a weapon of class can do! Holding 200 rounds with wheel wound function and featuring integrated clamp lugs and semi-transparent design.

If you want more BBs but don't want to weigh yourself down with an excessive amount of magazines, you need a high-cap magazine! The ARCTURUS Hi-Cap 350-BB magazine for M4/AR-15 AEG holds more than enough BBs for multiple firefights out on the skirmish field and is based on the iconic NATO STANAG 30rnd mag with its stamped steel shell.

Like most other Airsoft high-caps, this magazine is loaded through the fill window on the top of the magazine body. First, open the window, then pour your BBs in. With this done, use the winding wheel on the baseplate to tension the mag, and you're all set. If you need more capacity but don't want to compromise agility with a rig full of magazines, the ARCTURUS Hi-Cap 350-BB magazine for M4/AR-15 AEG is what you need!

If you need mags for your King Arms VSS Vintorez or AS VAL these are the ones! This great value box of 5 midcaps is built to match the real thing perfectly, including the reinforcement ribs on the sides and the unique shape of the 9X39mm real steel Vintorez/VAL magazine. The magazines can be loaded through the fill/feed port at the top of the magazine body using an Airsoft speed loader or loading rod. Being spring-loaded mid-caps, with these mags in your rig you don't need to worry about battle rattle!

These mags are designed for the King Arms VSS Vintorez/AS VAL AEG platform and will not work in the LCT or CYMA VSS/AS VAL AEGs.

If you need a high-quality magazine for your M4/AR-15 AEG, you are in luck! The Novritsch 225rnd Magazine is the gen.2 model of Novritsch M4 magazines and comes with some new refinements and improvements. It comes with a monopod baseplate, perfect for shooting from a prone position. It also has a number matrix on the bottom so you know which magazine you're using.

There is also a viewing window on the side of the magazine so you know when you're running short on BBs. The baseplate is also easily removable and the internal magazine can be removed for easy maintenance and cleaning. This magazine is the perfect choice for any skirmisher who is looking for a reliable and consistent performance!

If you have an M4 with a rapid rate of fire, these magazines can easily keep up! The TPM-AR is one of the latest enhanced magazines from PTS Syndicate, a brand well known for its premium mags. The TPM-AR is compatible with practically any M4 AEG and is styled after the iconic design seen everywhere in Airsoft. This magazine is a spring-fed mid-cap and can be loaded using a speedloader through the fill/feed port on the top of the mag.

If you're running an upgraded M4/AR-15 AEG-based DMR, this should suit you! The Elite Lock 'n' Load bundle pairs 2 of the best AR AEG mags around, the PTS EPM1-S 170rnd Mid-cap with the best BBs out there, G&G's Competition Grade 0.28g BBs. DMR users who need maximum capacity in a small form paired with high grade BBs for perfect accuracy: this bundle was made with you in mind!

Those lucky enough to be rocking a Tokyo Marui Next Generation Recoil System (NGRS) AEG can now lock and load with the best magazines in the Airsoft industry! The PTS EPM magazine has been around for some time now in one form or another and is now offered to NGRS users (M4, 416 and SCAR-L), granting superb built quality, unparalleled feed speed and reliability. The magazine is constructed from tough DuPont Zytel Polymer, making it extremely durable and robust with a great matt finish.

A spare magazine designed specifically for the Tokyo Marui 5.56 platform recoil series. 

If you're involved in a mix of milsim and standard skirmishes, these are the mags for you! The ARCTURUS 30/130rnd EMM Variable-Cap Mag for M4/AR-15 AEG; 5 Pack is a great value set of 5 matching magazines, made from strong and light high-density polymer with a modern aesthetic. These magazines are designed for M4/AR-15 AEGs but should also work in most SCAR-L and L85 AEGs.

Each magazine is loaded through the fill/feed port on the top of the magazine body using a speed loader or loading rod. To adjust capacity, press the button on the centre of the baseplate and slide the baseplate forward and off the magazine. After this, slide the internals out through the bottom to access the capacity switch and choose between a realistic 30-round mag and a more competitive 130-rounder!

On the outside, these ARCTURUS magazines feature a "mag pod" style baseplate to be used as an improvised shooting support, texture and linear serrations for optimal traction and a witness window on each side so you can confirm your magazine's current round count. If you're looking for versatile, modern mid-caps to fill your rig, the ARCTURUS 30/130rnd EMM Variable-Cap Mag for M4/AR-15 AEG; 5 Pack is a superb option!

Suppose you're looking for some extra magazines for your gas blowback AK platforms, if so, then the GHK 40rnd Magazine for AK74 GBBRs is exactly what you need! It has a polymer shell and alloy internals with a steel spring, which makes it very robust and reliable, sure to survive even the most intense of skirmishes. The magazine features a slick black design that matches most AK platforms perfectly.

The magazine holds up to 40 rounds, and features Polymer feed lips, which are also the fill location using an Airsoft speedloader. The magazine gas fill valve is found at the rear using any Airsoft green gas. The insertion method for this magazine is the traditional AK "rock and lock" style, this means you have to insert the front section of your mag first, then, "rock" your magazine back to lock it in place in your AK rifle.

If you want a high-quality magazine that will never let you or your gas blowback AK down, the GHK 40rnd Magazine for AK74 GBBRs is certainly the choice for you!

This magazine is styled after the real 32rnd DD M4 Magazines, complete with an increased capacity of 230 BBs and a high-vis yellow fill/feed port to mimic the high-vis follower of the real thing, and to ensure you don't insert the mag backwards!

This magazine is designed to be compatible with high-speed builds, so if your AEG demands a high-quality magazine to keep up with its appetite, this will do the trick. Just like any other Airsoft mid-cap, loading this mag is done through the fill/feed port on the top of the magazine with an Airsoft speed loader or loading tool. This magazine is designed for an M4/AR-15 AEG platform but has also been designed with universal compatibility in mind, so they should also fit most SCAR-L, 416, L85 and other AEGs with M4 mag compatibility. 

As a bonus, the DD mag design sports a grippy texture on the sides, the front and the rear to assist in wet weather operations and a loop on the baseplate for "mag-podding" or attaching a paracord pull assist. With official licencing, high-quality build, massive capacity for a mid-cap and no battle rattle to give you away, these magazines will see you well equipped to face down with high-cap users while nearly doubling the capacity of your usual 130rnd mid-cap

This magazine is for your AK electric replicas. For those of you who can't decide on more shots or realism, fear not! This magazine is adjusted with the simple press a button on the interior of the mag, adjusted to either 30 or 130 rounds.

This mag is loaded from the top using a speed loader and features no loose BBs like you would hear in high-cap magazines, which is great news for you guys that like to sneak up on opponents.

Constructed from high density polymer, the magazine features a ridged texture on the front for additional grip and ease of reloading.

If you run a modernised, tactical Airsoft AK AEG rifle you will probably want some equally modern magazines! The 500rnd AK47 Reinforced Polymer High-cap Magazine from CYMA is designed with a strong polymer shell with reinforcing ribs across all its surfaces, to strengthen the shell and provide additional grip. The base plate of the magazine is also slightly widened to allow it to be more easily drawn from a magazine pouch. This magazine holds a whopping 500 rounds and can be filled through the fill window on the top of the magazine, and is wound using the winding wheel on the baseplate. This magazine is compatible with any standard AK style Airsoft AEG, but its steep curve is a tell-tale sign that this is a 7.62 style AK magazine, for those who like to keep it real!

This magazine gets its style from the real 32-round DD M4 magazines, offering an impressive 230 BB capacity and featuring a high-visibility yellow fill/feed port. This not only replicates the look of the real steel follower but also helps prevent backwards insertion under pressure.

Designed for high-speed builds, these mags are ideal for AEGs that demand reliable feeding at a rapid pace. Like all Airsoft mid-caps, they are loaded through the fill/feed port at the top using a standard Airsoft speedloader or loading tool. While optimised for the M4/AR-15 AEG platform, these mags are designed with broad compatibility in mind and should also work with most SCAR-L, 416, L85, and other AEGs that accept M4-style magazines.

Additional features include a textured surface on the sides, front, and rear for improved grip in wet or muddy conditions, and a loop on the baseplate for “mag-podding” or attaching a paracord pull. With official licensing, premium construction, generous mid-cap capacity, and a silent operation free of battle rattle, these mags are perfect for taking on high-cap users, while nearly doubling the capacity of your standard 130-round mid-cap!

Do you often find yourself running out of ammo on the battlefield? With this magazine, that will never be an issue again! The KRYTAC 5000rnd Electric Box Magazine is perfect for those with a heavy trigger finger or in need of a replacement so they can get their Trident LMG back on the skirmish field. Compatability-wise, this magazine is designed for the KRYTAC Trident LMG series. However, having a regular M4/AR-15 magazine well, it should fit in most M4/AR-15 AEGs, although compatibility can not be guaranteed.

The magazine auto-winds to ensure BBs stay feeding but there is also a button on the bottom of the magazine to manually wind it when you first load it or to make sure the magazine is ready for your next long burst of full auto-fire. It's powered by a 7.4V Deans battery (not included) and holds 5000rnds. That's a lot of firepower perfect for laying down some suppressive fire while you charge forwards on the battlefield.