- 380rnd Capacity
- High density polymer construction
- For M4/AR15/SCAR-L/416 AEG
Looking for polymer high-cap magazines for your 416 or SCAR-L? Shopping for polymer mags can be tricky with these platforms, but the NUPROL 380rnd LS-Mag High-Cap magazine fills the void! This magazine is designed to fit and feed in both M4/AR15 and 416/SCAR-L AEGs, saving the trial and error and guesswork if you own one of the latter two platforms.
This magazine is constructed from strong polymer and features ribs on its external surfaces for reinforcement and to provide extra grip when reloading under pressure or in poor weather conditions. On the right side of the mag, we are treated to recessed markings, reading "Cal.5.56mmx45" and "30" with a bullet symbol above. This magazine is loaded through the fill window at the top of the magazine and is tensioned via the winding wheel on the baseplate.
- 380rnd Capacity
- High density polymer construction
- For M4/AR15/SCAR-L/416 AEG
Looking for polymer high-cap magazines for your 416 or SCAR-L? Shopping for polymer mags can be tricky with these platforms, but the NUPROL 380rnd LS-Mag High-Cap magazine fills the void! This magazine is designed to fit and feed in both M4/AR15 and 416/SCAR-L AEGs, saving the trial and error and guesswork if you own one of the latter two platforms.
This magazine is constructed from strong polymer and features ribs on its external surfaces for reinforcement and to provide extra grip when reloading under pressure or in poor weather conditions. On the right side of the mag, we are treated to recessed markings, reading "Cal.5.56mmx45" and "30" with a bullet symbol above. This magazine is loaded through the fill window at the top of the magazine and is tensioned via the winding wheel on the baseplate.
- 150 rnd capacity
- Polymer construction
- For Airsoft M4/AR15 AEG rifles
Having more magazines in your loadout means more opportunities to get kills! The NUPROL W-Mag is the latest in NUPROL's line of AEG mid-capacity magazines, sporting a high-density polymer shell, a steel feed spring and a rubber baseplate which both protects the internals of the magazine in the event that it is dropped, and allows the magazine to be used as an improvised shooting support using a technique known as "mag-podding". This magazine is a spring-loaded design and can be filled using a standard Airsoft speed loader through the fill/feed port at the top of the magazine.
- 150 rnd capacity
- Polymer construction
- For Airsoft M4/AR15 AEG rifles
Having more magazines in your loadout means more opportunities to get kills! The NUPROL W-Mag is the latest in NUPROL's line of AEG mid-capacity magazines, sporting a high-density polymer shell, a steel feed spring and a rubber baseplate which both protects the internals of the magazine in the event that it is dropped, and allows the magazine to be used as an improvised shooting support using a technique known as "mag-podding". This magazine is a spring-loaded design and can be filled using a standard Airsoft speed loader through the fill/feed port at the top of the magazine.
- Stubby Design
- Steel Outer Shell
- VN/Vietnam Style
A Mid-Cap Magazine for M4/M16 Platform Airsoft Guns, which is made with a Steel Outer Shell to make it tough, well weighted and realistic. It has a 'stubby' design as seen in the M16s of the Vietnam War Era, and is a Spring-Loaded design which will feed all the BBs until empty without the need for winding. This is ideal for DMRs or Period Replicas, or for anyone who wants Mid-Cap Magazines that are low profile and won't get snagged on your kit as much as full size ones.
- 450rnd Capacity
- Extended 40rnd style design
- For M4/AR15 AEG Rifles
Looking for an interesting mag for your M4? The NUPROL 450rnd H-Mag High-Cap is designed for the M4/AR15 AEG but should work in most compatible platforms, and is an extended 40rnd style magazine which gives your primary a more beastly, aggressive look. The magazine is a wheel wound high-cap with its winding wheel located on the baseplate and is filled via the fill window at the top of the magazine body.
Either side of the magazine has a modern hex style texture to provide extra grip when pulling the magazine from a pouch and also has 5.56x45mm markings recessed into the design to add a realistic look. This mag would pair well with any M4/AR15 AEG setup with a cutting edge look!
- 450rnd Capacity
- Extended 40rnd style design
- For M4/AR15 AEG Rifles
Looking for an interesting mag for your M4? The NUPROL 450rnd H-Mag High-Cap is designed for the M4/AR15 AEG but should work in most compatible platforms, and is an extended 40rnd style magazine which gives your primary a more beastly, aggressive look. The magazine is a wheel wound high-cap with its winding wheel located on the baseplate and is filled via the fill window at the top of the magazine body.
Either side of the magazine has a modern hex style texture to provide extra grip when pulling the magazine from a pouch and also has 5.56x45mm markings recessed into the design to add a realistic look. This mag would pair well with any M4/AR15 AEG setup with a cutting edge look!
- 150rnd Capacity
- High density polymer construction
- For M4/AR15/SCAR-L/416 AEG
Looking for polymer mid-cap magazines for your 416 or SCAR-L? Shopping for polymer mags can be tricky with these platforms, but the NUPROL 150rnd LS-Mag Mid-Cap magazine fills the void! This magazine is designed to fit and feed in both M4/AR15 and 416/SCAR-L AEGs, saving the trial and error and guesswork if you own one of the latter two platforms.
This magazine is constructed from strong polymer and features ribs on its external surfaces for reinforcement and to provide extra grip when reloading under pressure or in poor weather conditions. On the right side of the mag, we are treated to recessed markings, reading "Cal.5.56mmx45" and "30" with a bullet symbol above. This magazine is loaded through the fill/feed port at the top of the magazine using an Airsoft speed loader or loading rod.
- No "battle rattle"
- Steel shell and feed spring
- Fits most M4/AR-15 AEGs
Are you looking for some cheap mid-caps to feed your Airsoft AEG? Well, you're in luck! The Battleaxe 200rnd Mid-Cap Steel Magazine For M4/AR-15 AEGs is an affordable solution that allows you to skirmish for longer without needing to refill magazines constantly. Its mid-cap design means that all the BBs are fed without the need for winding, plus, there is no "battle rattle".
The steel outer shell of this magazine ensures that it is strong enough to survive the rigours of a rough battlefield, keeping the polymer internals and steel feed spring safe, so you can be sure that your magazine will always be reliable. The magazine shape is based on the STANAG design, the iconic European design and features grooves on its surface for better gripping and faster reloads, in all weather conditions.
Keep your Airsoft rifles well fed with the affordable Battleaxe 200rnd Mid-Cap Steel Magazine For M4/AR-15 AEGs, and you'll be sure to outgun all those who oppose you on the battlefield.
- 110rnd Capacity
- Steel shell, polymer internals
- For M4/AR15 AEG - DMR/M16VN style mag
If you are looking for short M4/AR15 Airsoft magazines, whether it is for a Vietnam War re-enactment or you just want to get nice and low with your DMR to make good use of cover, NUPROL has the answer. This 110rnd Mid-cap magazine is constructed with a steel shell and polymer internals with a steel feed spring and is super short and easy to carry plenty of.
This magazine is patterned after the real world 20-round M16 magazine issued during the early Vietnam war which also found use in SPR and DMR rifles in the much more recent Iraq and Afghanistan conflicts. This magazine is a spring-loaded mid-cap and is loaded using a speed loader or loading rod/tool through the fill/feed port at the top of the magazine body.
- 110rnd Capacity
- Steel shell, polymer internals
- For M4/AR15 AEG - DMR/M16VN style mag
If you are looking for short M4/AR15 Airsoft magazines, whether it is for a Vietnam War re-enactment or you just want to get nice and low with your DMR to make good use of cover, NUPROL has the answer. This 110rnd Mid-cap magazine is constructed with a steel shell and polymer internals with a steel feed spring and is super short and easy to carry plenty of.
This magazine is patterned after the real world 20-round M16 magazine issued during the early Vietnam war which also found use in SPR and DMR rifles in the much more recent Iraq and Afghanistan conflicts. This magazine is a spring-loaded mid-cap and is loaded using a speed loader or loading rod/tool through the fill/feed port at the top of the magazine body.
- Check and dot pattern texture
- 200rnd Capacity - BIG mid-cap
- For M4/AR15/SCAR-L/416 AEGs
For those of you looking for a mid-cap magazine, but still want to hold a substantial amount of BBs to reduce reloads this magazine is what you're looking for.
Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.
The mag features a check and dot pattern ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.
- Check and dot pattern texture
- 200rnd Capacity - BIG mid-cap
- For M4/AR15/SCAR-L/416 AEGs
For those of you looking for a mid-cap magazine, but still want to hold a substantial amount of BBs to reduce reloads this magazine is what you're looking for.
Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.
The mag features a check and dot pattern ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.
- Checked texture
- 140rnd Capacity
- For M4/AR15/SCAR-L/416 AEGs
For those of you looking for a mid-cap magazine with a modern and realistic style with calibre engravings, this is the mag for you!
Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.
The mag features a checked ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.
- 30rnd Capacity
- Green gas magazine
- Fits CYMA CGS & TM ZET M4/AR-15 GBBR
If you're getting gassed up for the GBBR season and you're running a CGS or TM ZET system GBBR, fill your rig with these! The CYMA 30rnd Green Gas Magazine for M4/AR-15 CGS & ZET GBBR is compatible with both CYMA CGS and Tokyo Marui ZET system M4/AR-15 GBBRs and is a green gas magazine with the fill valve on the rear of the steel STANAG style body.
The mag can be loaded through the feed lips at the top of the magazine, though this can be challenging with a standard speed loader without a GBBR adapter. As with the original TM and CYMA GBBR magazines, these mags include the bolt stop components which lock the bolt open at the end of a mag, and each mag holds 30 BBs.
- 35rnd Capacity
- High density polymer shell
- For Double Eagle Noveske N4 MWS GBBR
If you are looking for mags for your Double Eagle EMG Noveske N4 MWS you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR and unfortunately don't fit the Tokyo Marui M4A1 MWS ZET System GBBR. Thought we would get the bad news over with early!
The mag is constructed with a high-density polymer shell and alloy internals and can be loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is on the rear of the magazine, just below the knocker valve, and the mag is compatible with both green gas and red gas.
The design of the externals is down to Double Eagle themselves, who have added an over-insertion stop at the front of the magazine to prevent the feed lips from being damaged after a reload under pressure. On each side of the body, there is also anti-slip dot texture to prevent the magazine from being dropped and the front of the mag also features finger grooves so it can be used as a makeshift grip when shooting from unconventional positions.
- 35rnd Capacity
- High density polymer shell
- For Double Eagle Noveske N4 MWS GBBR
If you are looking for mags for your Double Eagle EMG Noveske N4 MWS you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR and unfortunately don't fit the Tokyo Marui M4A1 MWS ZET System GBBR. Thought we would get the bad news over with early!
The mag is constructed with a high-density polymer shell and alloy internals and can be loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is on the rear of the magazine, just below the knocker valve, and the mag is compatible with both green gas and red gas.
The design of the externals is down to Double Eagle themselves, who have added an over-insertion stop at the front of the magazine to prevent the feed lips from being damaged after a reload under pressure. On each side of the body, there is also anti-slip dot texture to prevent the magazine from being dropped and the front of the mag also features finger grooves so it can be used as a makeshift grip when shooting from unconventional positions.
- Checked texture
- 200rnd Capacity - BIG mid-cap
- For M4/AR15/SCAR-L/416 AEGs
For those of you looking for a mid-cap magazine, but still want to hold a substantial amount of BBs to reduce reloads this magazine is what you're looking for.
Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.
The mag features a checked ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.
- Checked texture
- 200rnd Capacity - BIG mid-cap
- For M4/AR15/SCAR-L/416 AEGs
For those of you looking for a mid-cap magazine, but still want to hold a substantial amount of BBs to reduce reloads this magazine is what you're looking for.
Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.
The mag features a checked ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.
- Lancer Systems trademarks
- Advanced raised grip textures
- 190 round mid-cap
EMG have teamed up with Lancer Systems to bring you a fully trademarked and licensed .300 blackout style magazine to give your Airsoft M4 some serious style points. The mag features an ultra modern aesthetic with the following trademarks:
- '.300 BLACKOUT'
- 'L5-AWA'
- 30BLK
- LANCER SYSTEMS
- 20 / 30
The mag is a mid cap that holds 190 rounds, which is a very large capacity for a mag of this type and features no 'battle rattle unlike high-cap magazines. The mag is constructed from translucent polymer, revealing the mock cartridges within for additional realism. Gripping the mag is no issue thanks to the raised stippled texture and grid pattern to make reloading as quick and easy as possible.
- Lancer Systems trademarks
- Advanced raised grip textures
- 190 round mid-cap
EMG have teamed up with Lancer Systems to bring you a fully trademarked and licensed .300 blackout style magazine to give your Airsoft M4 some serious style points. The mag features an ultra modern aesthetic with the following trademarks:
- '.300 BLACKOUT'
- 'L5-AWA'
- 30BLK
- LANCER SYSTEMS
- 20 / 30
The mag is a mid cap that holds 190 rounds, which is a very large capacity for a mag of this type and features no 'battle rattle unlike high-cap magazines. The mag is constructed from translucent polymer, revealing the mock cartridges within for additional realism. Gripping the mag is no issue thanks to the raised stippled texture and grid pattern to make reloading as quick and easy as possible.
- 230rnd Capacity, Pack of 6
- High density polymer construction
- For M4/AR-15, SCAR-L & 416 AEGs
If you're looking to load up in one go with a full complement of high quality mid-caps, EMG's Daniel Defense Mid-Cap mags are some of the best out there. These magazines are styled after the real 32rnd DD M4 Magazines, complete with an increased capacity of 230 BBs and a high-vis yellow fill/feed port to mimic the high-vis follower of the real thing, and to ensure you don't insert the mag backwards!
These magazines are designed to be compatible with high-speed builds, so if your AEG demands a high quality magazine to keep up with its appetite, these will do the trick. Just like any other Airsoft mid-cap, loading these mags is done through the fill/feed port on the top of the magazine with an Airsoft speed loader or loading tool. These magazines are designed for the M4/AR-15 AEG platform but have also been designed with universal compatibility in mind, so they should also fit most SCAR-L, 416, L85 and other AEGs with M4 mag compatibility.
As a bonus, the DD mag design sports a grippy texture on the sides, the front and the rear to assist in wet weather operations and a loop on the baseplate for "mag-podding" or attaching a paracord pull assist. With official licencing, high quality build, massive capacity for a mid-cap and no battle rattle to give you away, these magazines will see you well equipped to face down with high-cap users while nearly doubling the capacity of your usual 130rnd mid-cap!
- 130rnd Capacity
- 7.62x39mm Style AR magazine
- Compatible with most M4/AR-15 AEGs
If you are running the Double Eagle DEK762 and you want mags that match the original, you just found them! The Double Eagle 130rnd 7.62x39 Style Mid-Cap Magazine for M4/AR-15 AEG is styled after real steel 7.62x39mm AR magazines, making it a perfect fit for the DEK762 but also compatible with most M4/AR-15 AEGs.
The magazine is constructed with a steel shell, polymer internals and a steel feed spring, showcasing mock reinforcement ribs stamped into each side. This mag is also quite short for a 130-round mag, allowing you to get closer to the ground when shooting from the prone position and make better use of surrounding cover. As with other Airsoft mid-caps, the 7.62x39 style magazine is loaded through the fill/feed port at the top of the magazine body using a speed loader or loading tool. Whether you own the DEK762 or you want to add an unconventional look to your M4/AR-15 AEG, this mag is perfect for the job!
- 120 Round Capacity
- Modern Styled Design
- Moulded Polymer Magazine
An Airsoft Medium Capacity Magazine that is ideal for the Airsofter wanting to inject a little more realism into their Skirmishing style. Loosely inspired by the design of modern P-Mag type magazines, this is G&Gs attempt at creating a lightweight and uniquely styled magazine for STANAG Magazine compatible Airsoft Guns, such as the M4 and M16.
- 380rnd Capacity
- Windowed mag design with mock cartridges
- For Airsoft M4/AR15 AEG rifles
If you need magazines but you also want to add a more realistic look to your M4/AR15 the NUPROL W-Mag would be a great choice.
This magazine holds 380 BBs and is loaded through the feed window, located on the top of the magazine bod. This magazine is constructed from strong polymer, while still being lightweight, allowing you to carry more mags while speeding round the field.
Being a flash mag, the magazine is reloaded by pulling the bottom winding cord located under the base plate, keeping you in the fight for longer.
This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see convincing mock 5.56 cartridges which add a touch of realism to any Airsoft M4/AR15 AEG.
- 380rnd Capacity
- Windowed mag design with mock cartridges
- For Airsoft M4/AR15 AEG rifles
If you need magazines but you also want to add a more realistic look to your M4/AR15 the NUPROL W-Mag would be a great choice.
This magazine holds 380 BBs and is loaded through the feed window, located on the top of the magazine bod. This magazine is constructed from strong polymer, while still being lightweight, allowing you to carry more mags while speeding round the field.
Being a flash mag, the magazine is reloaded by pulling the bottom winding cord located under the base plate, keeping you in the fight for longer.
This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see convincing mock 5.56 cartridges which add a touch of realism to any Airsoft M4/AR15 AEG.
- 380rnd Capacity
- Polymer construction
- High-cap for M4/AR15 AEG
If you are looking for high-cap mags for your Airsoft M4 but you want reduced weight so you can carry more, we admire your spirit and wish you well in your quest for victory through volume of fire. The NUPROL 380rnd L-Mag will be an asset to you thanks to its ultra-low weight and exceptional capacity. This mag crams an extra 80 rounds in over a standard M4 high-cap, and is lighter as well, thanks to its polymer construction. This magazine can be loaded through the fill window at the top of the magazine and is wound up using the winding wheel on the baseplate.
The external design of this magazine is patterned after the popular real world "L" magazine and includes all the details one would expect to see, such as textured panels on either side of the mag body for extra gripping qualities, and mock witness windows. This magazine is compatible with most M4/AR15 AEG rifles but should also work in SCAR and 416 AEGs.
- 380rnd Capacity
- Polymer construction
- High-cap for M4/AR15 AEG
If you are looking for high-cap mags for your Airsoft M4 but you want reduced weight so you can carry more, we admire your spirit and wish you well in your quest for victory through volume of fire. The NUPROL 380rnd L-Mag will be an asset to you thanks to its ultra-low weight and exceptional capacity. This mag crams an extra 80 rounds in over a standard M4 high-cap, and is lighter as well, thanks to its polymer construction. This magazine can be loaded through the fill window at the top of the magazine and is wound up using the winding wheel on the baseplate.
The external design of this magazine is patterned after the popular real world "L" magazine and includes all the details one would expect to see, such as textured panels on either side of the mag body for extra gripping qualities, and mock witness windows. This magazine is compatible with most M4/AR15 AEG rifles but should also work in SCAR and 416 AEGs.
- 380rnd Capacity
- Polymer construction
- High-cap for M4/AR15 AEG
If you are looking for high-cap mags for your Airsoft M4 but you want reduced weight so you can carry more, we admire your spirit and wish you well in your quest for victory through volume of fire. The NUPROL 380rnd L-Mag will be an asset to you thanks to its ultra-low weight and exceptional capacity. This mag crams an extra 80 rounds in over a standard M4 high-cap, and is lighter as well, thanks to its polymer construction. This magazine can be loaded through the fill window at the top of the magazine and is wound up using the winding wheel on the baseplate.
The external design of this magazine is patterned after the popular real world "L" magazine and includes all the details one would expect to see, such as textured panels on either side of the mag body for extra gripping qualities, and mock witness windows. This magazine is compatible with most M4/AR15 AEG rifles but should also work in SCAR and 416 AEGs.
- 2 x PTS Syndicate EPM 1 magazines
- G&G Armament 0.28g Competition Grade BBs
- Perfect for a high-end M4/AR-15 AEG
If you need the best mags around coupled with the best BBs, here you go! The Elite Lock 'n' Load bundle pairs 2 of the best AR AEG mags around, the PTS EPM 1 250rnd Mid-cap with the best BBs out there, G&G's Competition Grade 0.28g BBs. If you run a high performance M4/AR-15 AEG platform, this bundle was made with you in mind!
PTS EPM 1 Magazines require the very strong internal spring to be bedded in before use. To do this, simply fill the magazines using a standard speed loader (avoid using an ODIN or similar crank wound loader) and empty them again by pulling the BB retainer on the top of the magazine backwards with the feed/fill port pointed in a safe direction, preferably back into your BB bottle. Do this 2-3 times for each magazine before the initial use.