Airsoft Starter Guns Under £129.99

If you are looking for a Gas Blowback Pistol but you're not sure where to start, this bundle was made with you in mind! The EU17 Complete Beginner Bundle includes the RAVEN EU17 GBB Pistol finished in Pre Two-Tone Blue, VORSK 0.25g BBs, a Speed Loader and a can of NUPROL 2.0 Green Gas; everything you need to get started on your Airsoft adventure (other than your choice of eye protection!).

Being finished in Pre Two-Tone means you do not need UKARA or a VCRA defence to buy this set, and also that you can skip the wait times for usual Two-Toned items. Whether you are looking for a last-minute Airsoft gift or you want to get started with an Airsoft sidearm and everything you need to get shooting, this bundle will serve you well!

A lightweight spring powered Airsoft 6mm sniper that is ready to go out of the box - no assembly required! Supplied with a 4x32 rifle scope with mount rings, a bipod and two magazines, the Tango T96 is everything you need to get started in the world of Airsoft sniping.

A lightweight spring powered Airsoft 6mm sniper that is ready to go out of the box - no assembly required! Supplied with a 4x32 rifle scope with mount rings, a bipod and two magazines, the Tango T96 is everything you need to get started in the world of Airsoft sniping.

If you're just getting started on your Airsoft journey and don't want to get in too deep straight away, the CYMA CM.517 M4 Combat Machine AEG is a fine choice. This battery-powered Airsoft AEG is constructed almost entirely from high-density ABS polymer with an alloy outer barrel and alloy version 2 gearbox, keeping the build lightweight and agile, not to mention cost-effective. While it weighs practically nothing (only 1.7kg!), the CM.517 doesn't feel flimsy thanks to its use of high-density ABS polymer. Inside we are treated to surprisingly well-equipped internals, offering respectable performance in both outdoor and indoor skirmishes.

The alloy version 2 gearbox the CM.517 is based around is equipped with 18:1 standard ratio gears running on 8mm steel bushings, a type 1 cylinder, reinforced polymer compression parts and a quick change spring system. Also inside is a 6.03mm tightbore inner barrel and an updated rotary HOP-up unit, giving you above-average accuracy potential and the latest HOP-up unit design for M4/AR-15 AEG platforms. All internal parts are standard Tokyo Marui AEG spec, meaning the sky is the limit when it comes to upgrades later down the line!

Externally, the CM.517 is absolutely mission-ready, equipped with a 20mm Picatinny quad rail handguard and 20mm railed receiver, ready for any 20mm Picatinny accessories you need, from red dot sights and scopes to vertical foregrips, laser aiming modules and tactical flashlights. The alloy outer barrel is rocking 14mm CCW male threads, meaning you can add a tracer unit to make your BBs glow or a suppressor for sneaky styling. If you're ready to get into the sport with an affordable, reliable and competitive platform for a great price, the CYMA CM.517 M4 Combat Machine AEG is a fantastic choice!

If you're looking for an AR-9 platform with a lightweight build and programmable fire controls, allow us to introduce you to the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG. Following in the footsteps of the impressive original FX01 and X-ASR-equipped version, this version is rocking Specna's HAL¹ ETU, offering programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-FX01, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

With Specna's ultra-strong high density polymer and the option of using 20mm Picatinny or cutting-edge M-LOK accessories, this is one of the best value AR-9 SMG platforms around right now, ready for any challenge that awaits it. Whether you're a new skirmisher looking for the AR-9 shape with more features than the average or a veteran looking for a chance of pace with a lightweight and compact SMG, the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG will be an asset to you!

If you're looking for an AR-9 platform with a lightweight build and programmable fire controls, allow us to introduce you to the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG. Following in the footsteps of the impressive original FX01 and X-ASR-equipped version, this version is rocking Specna's HAL¹ ETU, offering programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-FX01, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

With Specna's ultra-strong high density polymer and the option of using 20mm Picatinny or cutting-edge M-LOK accessories, this is one of the best value AR-9 SMG platforms around right now, ready for any challenge that awaits it. Whether you're a new skirmisher looking for the AR-9 shape with more features than the average or a veteran looking for a chance of pace with a lightweight and compact SMG, the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG will be an asset to you!

If you're looking for an AR-9 platform with a lightweight build and programmable fire controls, allow us to introduce you to the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG. Following in the footsteps of the impressive original FX01 and X-ASR-equipped version, this version is rocking Specna's HAL¹ ETU, offering programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-FX01, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

With Specna's ultra-strong high density polymer and the option of using 20mm Picatinny or cutting-edge M-LOK accessories, this is one of the best value AR-9 SMG platforms around right now, ready for any challenge that awaits it. Whether you're a new skirmisher looking for the AR-9 shape with more features than the average or a veteran looking for a chance of pace with a lightweight and compact SMG, the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG will be an asset to you!

The VMP-1 platform is VORSK's first foray into GBB submachine guns and is built on the foundation of VORSK’s expertise in producing some of the best affordable GBB platforms on the market today. The VMP-1 makes use of the control layout of the MP9 platform but with an entirely new external style, complete with a side folding stock/brace setup and a unique QD suppressor mounting system built into the muzzle itself.

If you need something mightier than a pistol but more compact than a rifle, the VORSK VMP-1 is the perfect happy medium and promises to be a serious beast in the hands of CQB specialists and snipers looking for a sidearm with extra firepower!

Beginners and veterans alike, if you need a lightweight performance-oriented M4/AR-15 platform either to add to the arsenal or as your first AEG, Delta Armory is one to watch! New to the scene with loads of potential, the DA-C04 CHARLIE™ M4/AR-15 KeyMod AEG is constructed almost entirely from strong high density polymer for a lightweight and agile build with an alloy outer barrel to add strength where needed. 

The DA-C04 comes equipped with a KeyMod-style handguard with removable proprietary 20mm rail sections, a 20mm railed receiver ready for a red dot sight or scope, an ergonomic pistol grip styled after one of the most modern real steel AR grips and a threaded outer barrel for your tracer/suppressor needs. 

Inside, it gets even better! The reinforced version 2 gearbox boasts a quick change spring guide, an SHS piston and tappet plate, 7mm bushings and a steel 18:1 gearset. To add some accuracy and range into the mix, the DA-C04 is kitted out with a 6.03mm tightbore inner barrel and rotary HOP-up unit, giving you some of the best internal options pre-installed. If you want a lightweight primary you will never need to touch internally, this is it!

A Gas Blowback Pistol from NUPROL's RAVEN series which features a custom Hydro-Dipped skin, integrated Red Dot Sight, Low-Light Ironsights and a Tactical Rail Slot to offer the ultimate out-of-the-box tactical sidearm for Airsoft skirmishing.

A Gas Blowback Pistol from NUPROL's RAVEN series which features a custom Hydro-Dipped skin, integrated Red Dot Sight, Low-Light Ironsights and a Tactical Rail Slot to offer the ultimate out-of-the-box tactical sidearm for Airsoft skirmishing.

A Gas Blowback Pistol from NUPROL's RAVEN series which features a custom Hydro-Dipped skin, integrated Red Dot Sight, Low-Light Ironsights and a Tactical Rail Slot to offer the ultimate out-of-the-box tactical sidearm for Airsoft skirmishing.

If you have got your eye on an AR-9, Lancer Tactical just made the choice that bit harder! The LT-35 Battle X 9mm PDW is intended to be a lightweight platform for aggressive run and gun playstyles and is equipped with Lancer's Gen.2 internals, including a high torque motor, 6.03mm tightbore inner barrel and a well equipped version 2 gearbox with some choice reinforced parts.

The LT-35 is constructed almost entirely from high density nylon polymer, making it as solid as a rock and as light as a feather; a sure choice for any skirmisher who likes to move fast with minimal baggage. Its modern external design wants for nothing in the realm of accessorising, offering a railed receiver, M-LOK handguard and 14mm CCW male threaded barrel, meaning options are endless when it comes to kitting the Battle X out. The ARP9 looks worried!

If you have got your eye on an AR-9, Lancer Tactical just made the choice that bit harder! The LT-35 Battle X 9mm PDW is intended to be a lightweight platform for aggressive run and gun playstyles and is equipped with Lancer's Gen.2 internals, including a high torque motor, 6.03mm tightbore inner barrel and a well equipped version 2 gearbox with some choice reinforced parts.

The LT-35 is constructed almost entirely from high density nylon polymer, making it as solid as a rock and as light as a feather; a sure choice for any skirmisher who likes to move fast with minimal baggage. Its modern external design wants for nothing in the realm of accessorising, offering a railed receiver, M-LOK handguard and 14mm CCW male threaded barrel, meaning options are endless when it comes to kitting the Battle X out. The ARP9 looks worried!

An Airsoft 6mm replica SMG-5 SD6, manufactured by Jing Gong. Comes supplied with an integrated suppressor for looks and to slightly dampen muzzle report.

If you love the standard issue US Army M4A1 carbine, this should suit you! The Delta Armory DA-C03 CHARLIE™ M4A1 RAS AEG is styled after the M4A1 as it is issued to the US Army, featuring a RAS style quad 20mm railed handguard, M4A1 barrel profile with M203 cutout and the iconic AR-15 triangular front sight, along with some thoughtful modern ergonomic enhancements to improve handling. 

On the outside, Delta has added a gunfighter mod.3 style ergonomic pistol grip and the awesome Delta Armory battery stock and enhanced receiver, complete with gripping texture on the magazine well and a built-in enlarged trigger guard. As a replica of the Delta Armory CHARLIE™ line, the DA-C03 is constructed primarily from high density polymer with alloy trim parts to provide manageable weight and maintain peak agility in game. 

On the inside, the DA-C03 is kitted out with a tightbore inner barrel, a rotary HOP-up unit, and a pre-upgraded gearbox featuring an SHS tappet plate and piston, 7mm bushings and a quick change spring guide. Needless to say, this platform is superb value considering its features and is the perfect AEG for a new skirmisher who wants a cost-effective primary without any performance compromises!

The Double Eagle M56AL is the long version of the well liked M3 super 90 shotgun, a classic pump action shotgun design which feeds from 30rnd mock shotgun shells in the breech, and fires 3 BBs per trigger pull to appropriately simulate the spread of a real shotgun buckshot shell. The M56AL is constructed almost entirely from polymer with an alloy outer barrel and mock magazine tube, which makes this shotgun light and manoeuvrable despite its large and in charge status. Whether you fancy a challenge in CQB, or you are a fan of the movie Heat (1995), this shotgun would be an asset to your loadout.

If you love the John Wick look but want to skirmish in the cold, this is the JW3 pistol you need! The EMG CM.138 TTI JW3 Hi-Capa Combat Master AEP boasts official licencing from Taran Tactical Innovation which, of course, means gorgeous authentic TTI trademarks across the design. Being an AEP, this JW3 does not have a moving slide and is powered by an internal battery, meaning solid cold-weather performance keeping it on the field long after GBBs have gone into hibernation!

As much a looker as the GBB version, the JW3 AEP is internally based around the Tokyo Marui AEP gearbox design, enhanced with steel gears running on steel ball-bearing bushings. This improves trigger response and rate of fire while giving the JW3 a much smoother firing noise than other AEPs, not to mention a longer lifespan due to reduced stress on the gearbox shell.

Also inside is CYMA's AEP MOSFET, allowing 7.4V LiPo batteries to be used for a genuinely competitive semi-auto response rate and respectable full-auto fire rate, ideal for snipers looking for a compact and reliable backup platform or pistol aficionados wanting to skirmish to full effect without worrying about GBB cool-down in winter. If you're still wearing your tux when the frost sets in, the EMG CM.138 TTI JW3 Hi-Capa Combat Master AEP belongs in your holster!

If military-style M4s are your poison and you need a new platform for close quarters, the DA-C02 CHARLIE™ M4/AR-15 CQBR AEG is a sure choice. This AEG is styled after the CQBR (Close Quarters Battle Receiver) configuration of the M4A1 rifle, a drop-in upper receiver kit issued to Army Rangers, Delta Force and Navy Seals, fitted with a 10.5-inch outer barrel and KAC RAS Style quad railed handguard.

To furnish the CQBR M4 configuration with some modern ergonomics, Delta has added a gunfighter mod.3 style pistol grip and the awesome Delta Armory battery stock and enhanced receiver, complete with gripping texture on the magazine well and a built-in enlarged trigger guard. As a replica of the Delta Armory CHARLIE™ line, the DA-C02 is constructed primarily from high density polymer with alloy trim parts to provide manageable weight so you can make energetic advances all day long.

Internally, the DA-C02 is generously kitted out with a tightbore inner barrel, a rotary HOP-up unit, and a pre-upgraded gearbox featuring an SHS tappet plate and piston, 7mm bushings and a quick change spring guide. If you need a solid, lightweight workhorse of an M4 platform with plenty of future upgrade and customisation options, the DA-C02 CQBR is exactly that. A platform this price has no business being so good straight out of the box!

If military-style M4s are your poison and you need a new platform for close quarters, the DA-C02 CHARLIE™ M4/AR-15 CQBR AEG is a sure choice. This AEG is styled after the CQBR (Close Quarters Battle Receiver) configuration of the M4A1 rifle, a drop-in upper receiver kit issued to Army Rangers, Delta Force and Navy Seals, fitted with a 10.5-inch outer barrel and KAC RAS Style quad railed handguard.

To furnish the CQBR M4 configuration with some modern ergonomics, Delta has added a gunfighter mod.3 style pistol grip and the awesome Delta Armory battery stock and enhanced receiver, complete with gripping texture on the magazine well and a built-in enlarged trigger guard. As a replica of the Delta Armory CHARLIE™ line, the DA-C02 is constructed primarily from high density polymer with alloy trim parts to provide manageable weight so you can make energetic advances all day long.

Internally, the DA-C02 is generously kitted out with a tightbore inner barrel, a rotary HOP-up unit, and a pre-upgraded gearbox featuring an SHS tappet plate and piston, 7mm bushings and a quick change spring guide. If you need a solid, lightweight workhorse of an M4 platform with plenty of future upgrade and customisation options, the DA-C02 CQBR is exactly that. A platform this price has no business being so good straight out of the box!

If you want to start your Airsoft adventure with a muffled bang, the Delta Armory DA-C05 CHARLIE™ Silent Ops 7 will do it. This integrally suppressed M4/AR-15 is rocking the sneaky "Honey Badger" look and is equipped with a 7-inch quad rail handguard for all your accessory needs. Unlike a real suppressor, the integral example installed on the Silent Ops 7 serves to conceal an extended 6.03mm tightbore inner barrel, giving this short and sneaky-looking platform surprising long range effectiveness.

As with the other offerings in the Delta Armory CHARLIE™ range, the tightbore inner barrel is paired with a rotary HOP-up unit, and a pre-upgraded gearbox featuring an SHS tappet plate and piston, 7mm bushings and a quick change spring guide. This gives you a respectable pre-upgraded feature set straight out of the box, with plenty of room for further upgrades thanks to full Tokyo Marui compatibility. Whether you are new to the sport or a veteran skirmisher looking for a sneaky backup platform, the Delta Armory DA-C05 is the best AR in this style and price range we have seen!

An electric powered M4 based Airsoft replica, which is constructed mainly from Polymer to offer a lightweight and maneuverable platform which packs a punch.

An Airsoft 6mm BB Gun, based on the M4 / AR Platform, which is a great entry grade Beginner weapon for those looking to start playing Airsoft, or even simply Backyard Plinking.

This is not only the perfect purchase for a beginner, but as a spare or backup gun for Experienced Players, due to its hard wearing and reliability.

The JG M5 SD5 is an integrally suppressed SMG-5 AEG featuring a polymer body and full sized battery stock. A very popular style of Airsoft rifle due to its widespread use by sneaky types of many militaries, great for some discrete CQB kills! 

If you are looking for a base gun for your dream custom AR or you like the classic look, the Delta Armory DA-C01 CHARLIE™ M4A1 is what you need. This M4/AR-15 AEG is styled after the original M4A1 rifle of the 1990s but with some 21st-century ergonomic enhancements to improve handling and a styled-up Delta Armory receiver matching modern real steel "billet" receivers.

Being a replica of the Delta Armory CHARLIE™ line, the DA-C01 is constructed primarily from high density polymer with alloy trim parts and is kitted out on the inside with a tightbore inner barrel, a rotary HOP-up unit, and a pre-upgraded gearbox featuring an SHS tappet plate and piston, 7mm bushings and a quick change spring guide.

With more pre-upgraded internals than a platform this price deserves and some stylish, modern enhancements, the DA-C01 would make a fine basis for a custom build but can also be left as it is to take advantage of some interesting old-school features!

If you're just getting into Airsoft and prefer a military-style primary, set your sights on the NUPROL Delta Pioneer SOPMOD M4/AR-15 AEG! This CQBR (Close Quarters Battle Receiver) style replica is constructed predominantly from high density polymer with an alloy outer barrel, front sight and handguard mounting hardware along with steel trim parts. This keeps the build lightweight and ideal for younger skirmishers or those with a speedy, aggressive playstyle!

Though it may be mostly polymer, this isn't the usual shiny "super-soaker" tier stuff; this is nylon fibre-reinforced polymer, the kind that may well outlast alloy when it comes to endurance. Inside, we are equipped with an alloy version 2 gearbox with 18:1 ratio steel gears running on 8mm ball bearing bushings and driven by a 21K RPM high torque motor; a competitive feature set for a platform at this price!

The inner barrel is also a 6.03mm tightbore paired with a 50° HOP-up bucking and rotary HOP-up unit, ensuring you can reach out and engage at longer ranges with an accuracy advantage using high quality BBs. If your tastes dictate a military style primary and you need something cheap but effective to get started, the NUPROL Delta Pioneer SOPMOD M4/AR-15 AEG is a fantastic choice!

If you're just getting into Airsoft and prefer a military-style primary, set your sights on the NUPROL Delta Pioneer SOPMOD M4/AR-15 AEG! This CQBR (Close Quarters Battle Receiver) style replica is constructed predominantly from high density polymer with an alloy outer barrel, front sight and handguard mounting hardware along with steel trim parts. This keeps the build lightweight and ideal for younger skirmishers or those with a speedy, aggressive playstyle!

Though it may be mostly polymer, this isn't the usual shiny "super-soaker" tier stuff; this is nylon fibre-reinforced polymer, the kind that may well outlast alloy when it comes to endurance. Inside, we are equipped with an alloy version 2 gearbox with 18:1 ratio steel gears running on 8mm ball bearing bushings and driven by a 21K RPM high torque motor; a competitive feature set for a platform at this price!

The inner barrel is also a 6.03mm tightbore paired with a 50° HOP-up bucking and rotary HOP-up unit, ensuring you can reach out and engage at longer ranges with an accuracy advantage using high quality BBs. If your tastes dictate a military style primary and you need something cheap but effective to get started, the NUPROL Delta Pioneer SOPMOD M4/AR-15 AEG is a fantastic choice!

If you're just getting into Airsoft and prefer a military-style primary, set your sights on the NUPROL Delta Pioneer SOPMOD M4/AR-15 AEG! This CQBR (Close Quarters Battle Receiver) style replica is constructed predominantly from high density polymer with an alloy outer barrel, front sight and handguard mounting hardware along with steel trim parts. This keeps the build lightweight and ideal for younger skirmishers or those with a speedy, aggressive playstyle!

Though it may be mostly polymer, this isn't the usual shiny "super-soaker" tier stuff; this is nylon fibre-reinforced polymer, the kind that may well outlast alloy when it comes to endurance. Inside, we are equipped with an alloy version 2 gearbox with 18:1 ratio steel gears running on 8mm ball bearing bushings and driven by a 21K RPM high torque motor; a competitive feature set for a platform at this price!

The inner barrel is also a 6.03mm tightbore paired with a 50° HOP-up bucking and rotary HOP-up unit, ensuring you can reach out and engage at longer ranges with an accuracy advantage using high quality BBs. If your tastes dictate a military style primary and you need something cheap but effective to get started, the NUPROL Delta Pioneer SOPMOD M4/AR-15 AEG is a fantastic choice!

An Airsoft Electric Powered 6mm AEG BB Gun, producing a satisfying 320fps, incredibly light weight and reliable Airsoft RIF. An excellent beginner Airsoft weapon but also highly favoured by experienced Airsofters due to its out of the box performance.

An Airsoft 6mm BB firing electric AEG designed in the style of the MP5 used by Special Forces around the world. Featuring a lightweight and durable Polymer external construction, this a RIF for those who like to stay light and fast on their feet.