- HFC HG-203 MAC-11 GBB Submachine Gun
- 2x HFC MAC-11 Green Gas Magazines
- Delta Armory .25g BBs & VORSK V6 Gas
If you need a backup platform with a bit more firepower than a pistol, the Panic Button Bundle should do the trick! This bundle includes the HFC HG-203 MAC-11 GBB Submachine Gun, 2 spare magazines, a can of VORSK V6 Green Gas, and a bag of Delta Armory's 0.25g BBs to get you started with the spray and pray life!
- Full metal construction
- Ultra-modern P90 platform
- Designed by Novritsch, Licenced by FNH
The Novritsch SSR90 is a radical reinvention of the P90 PDW concept, bringing this ageing spacegun into the 21st century with a significant external overhaul and the usual Novritsch compliment of pre-upgraded internals.
With a new M-LOK upper receiver, skeletonised trigger, QD sling points and a newly designed rubberised butt plate, the SSR90 has far more attachment interfaces than the original P90, better handling and a far shorter trigger pull, ideal for CQB bouts. The body is made from fantastic quality reinforced polymer and to make matters even sweeter, the SSR90 can be kitted out with Novritsch Rail Extension for even more accessory space or the Minimal Receiver Conversion for an even more unique aesthetic.
What is sure to turn heads is its phenomenal performance, particularly in terms of rate of fire and long range accuracy. This thing hits 17 rounds per second on a 7.4V LiPo battery, which is outlandish, to say the least. With a Maple Leaf HOP-up rubber and a newly designed TDC HOP-up unit, a 6.03mm tight bore inner barrel and a programmable ETU/MOSFET control unit, the Novritsch SSR90 FN Herstal P90 AEG Submachine Gun sure means business when it comes to performance!
- 550rnd Drum Mag
- Version 6 Gearbox
- Realistic Tommy Gun!
The CYMA CM.051 is a replica of the classic 'Chicago Typewriter' Thompson Submachine Gun, AKA the "Tommy Gun". The CM.051 comes complete with all the correct furniture, in a beautiful and well-toned Faux Wood finish.
This version of the Thompson has a few key differences from the M1A1 Military variant, mainly cooling fins on the barrel and the integrated Foregrip with/ finger grooves. Complete with a 550rnd Drum Magazine, this is the perfect Airsoft Electric Gun for someone who wants to stand out from the crowd, is interested in a historical or roleplay loadout, or just wants to suppress the enemy to bits using something that isn't an M4, the CYMA CM.051 is perfect for you.
- Side folding stock
- Ambidextrous controls
- 20mm Picatinny railed handguard and receiver
If you are after a unique and affordable Airsoft AEG submachine gun, the Double Eagle M89A fits the bill! This AEG sports full metal construction, and its nearly 100% fibre reinforced polymer construction matches the real thing in almost every way. This AEG has a compact front end bristling in 20mm Picatinny rails, making it ready for any accessories you want to mount, and boasts as well designed and rock solid side folding stock allowing the M89 to be used in intense close quarters engagements and also fit into smaller gun bags/cases!
- Alloy Receiver
- M1A1 Military Model
- Faux Wood Furniture
The Thompson M1A1 is a World War Classic Sub Machine Gun, however, it found its spotlight within darkened back alleys of a Mafia-Run New York City and was catapulted into infamy as the go-to gun for Gangsters and Lawmen during the 1920s due to it's large magazine capacity and high rate of fire. The CM.033 Does an excellent job of preserving the traditional aesthetics of the M1A1, featuring an alloy body and faux wood furniture, the 0.33 is a must-have for any classic Mafia fanatic.
- Built-in Foregrip
- 6.08mm Inner Barrel
- 65 Round Compact Low Capacity Magazine
It's the submachine gun that can be fired from a brief case! At just 33cm long, the CM.041J is a replica Airsoft gun which blurs the lines between Submachine gun and Machine Pistol.
- Full metal construction - Mostly steel
- ABS Polymer stock version
- 6.03mm Tightbore inner barrel
If you want to keep your setup realistic but need more ammo on tap, the S&T PPSh-41 EBB Submachine Gun AEG; ABS Stock is definitely worth a look. This full metal PPSh-41 SMG replica is packaged with a 2000 round drum magazine which matches that of the real PPSh perfectly, giving you an authentic platform with an almost unlimited ammo capacity! Like the Real Wood version, the vast majority of the metal parts in the build are steel, giving you authentic handling and realistic stamped markings.
To provide a more immersive firing experience, the S&T PPSh-41 is equipped with an Electro-Mechanical blowback mechanism which cycles the mock bolt each time you fire with an exciting "clack clack clack". We would be lying to you if we said this was proper recoil, but the slight jolt and mechanical noise as you fire makes this retro SMG a real blast to shoot, way more interesting than a standard AEG.
As with the Real Wood model, we have a unique gearbox shell inside equipped with 18:1 ratio steel gears running on 8mm steel slide-bearing bushings and the rotary HOP-up unit is paired with a 6.03mm tightbore inner barrel to give you the edge in accuracy. If you want to run a lesser seen platform with plenty of realism and the inherent firepower of a 2000 round drum mag at your disposal, the S&T PPSh-41 EBB Submachine Gun AEG; ABS Stock is a fantastic option!
- 6.05mm Tightbore inner barrel
- MOSFET pre-installed - 23RPS ROF
- Full metal construction - Mostly polymer like the real thing
If you are in the market for a new SMG and you want something that stands out, the S&T UST9 has its own unique look and the performance to back it up! The UST9 is built exactly like the real thing; with a high-density polymer body, metal outer barrel and steel body pins to keep everything firmly together while allowing for quick disassembly. This results in a lightweight and strong platform which does not compromise on realism!
S&T has also added some thoughtful pre-upgraded parts to the UST9 formula; offering a 6.05mm tightbore inner barrel to improve accuracy with less risk of a jam than tighter bores, a pre-installed MOSFET to improve trigger response and rate of fire and a quick change spring system for easy power tuning without needing to open the gearbox shell. If you want an SMG that is realistically built and not an SMG-5 or SMG-7, the UST9 should do the trick!
- Folding Stock
- Unique Magazine
- Full Alloy Construction
An Airsoft replica of the PP-19 Bizon 18mm variant. The Airsoft weapon is constructed almost entirely from Alloy, with a Polymer grip and handguard, meaning its durable & tough and feels great in the hands.
- Full metal construction
- Zion Arms Nebula ETU / MOSFET pre-installed
- CNC 7075 T6 Aluminium receiver & handguard
If you are looking for an SMG but you have experience with the M4/AR-15, an AR-9 platform would suit you perfectly. The Zion Arms PW9 MOD.1 follows the AR-9 design format but is constructed with a CNC 7075 T6 aluminium receiver and handguard making it lighter than a beachball while maintaining superb strength. Unlike many other Airsoft AR-9 SMGs, the PW9 is based on a real steel design, the R&D Precision PW9, and boasts licenced trademarks on its handguard as a homage to the real thing.
The story only gets sweeter when it comes to internals! Inside the PW9 we are treated to a polished 6.03mm tightbore inner barrel, rotary HOP-up unit, a quick change ball bearing spring guide, 19K RPM high-speed motor and the Zion Arms Nebula ETU to top it all off. The Nebula allows you to program the trigger for burst modes of different durations and also improves trigger response and rate of fire by reducing electrical resistance. If you have a mobile playstyle and appreciate a high speed SMG with phenomenal build quality you will definitely appreciate the Zion Arms PW9!
- Full metal construction
- Zion Arms Nebula ETU / MOSFET pre-installed
- CNC 7075 T6 Aluminium receiver & handguard
If you are looking for an SMG but you have experience with the M4/AR-15, an AR-9 platform would suit you perfectly. The Zion Arms PW9 MOD.1 follows the AR-9 design format but is constructed with a CNC 7075 T6 aluminium receiver and handguard making it lighter than a beachball while maintaining superb strength. Unlike many other Airsoft AR-9 SMGs, the PW9 is based on a real steel design, the R&D Precision PW9, and boasts licenced trademarks on its handguard as a homage to the real thing.
The story only gets sweeter when it comes to internals! Inside the PW9 we are treated to a polished 6.03mm tightbore inner barrel, rotary HOP-up unit, a quick change ball bearing spring guide, 19K RPM high-speed motor and the Zion Arms Nebula ETU to top it all off. The Nebula allows you to program the trigger for burst modes of different durations and also improves trigger response and rate of fire by reducing electrical resistance. If you have a mobile playstyle and appreciate a high speed SMG with phenomenal build quality you will definitely appreciate the Zion Arms PW9!
- Licenced by KRISS®
- Vector V2 - Revamped internals
- High torque motor, MOSFET & 6.05mm barrel
If you love cutting-edge, unconventional platforms, the KRISS® Vector must be on your list! This, the KRYTAC KRISS® Vector V2 AEG is the latest Vector AEG, equipped with refined internals with the same phenomenal build quality as the original.
- 6.08mm Inner Barrel
- Solid Feel and Construction
- Battery Compartment in Handguard
A 6mm BB Airsoft electric gun SMG-5A3 a popular submachine gun, complete with Telescopic Sliding Stock to make it very potent in CQB situations.
- Full metal construction
- Zion Arms Nebula ETU / MOSFET pre-installed
- CNC 7075 T6 Aluminium receiver & handguard
If you usually run an M4/AR-15 platform and you want familiar controls in a platform which looks like nothing else out there, the Zion Arms PW9 Long Handguard is definitely worthy of your scrutiny. This pre-upgraded AR9 SMG platform boasts full metal construction, making use of CNC machined 7075 T6 aluminium in its handguard and receiver for top-tier build quality, high strength and low weight.
On the inside, the PW9 is equally impressive. Featuring a 6.03mm tightbore inner barrel, 8mm ball bearing bushings, a quick change spring system and the Zion Arms Nebula ETU/MOSFET, allowing for burst mode, binary trigger or semi-auto only to be programmed using the fire controls of the gun itself. A 19K RPM high speed motor gives it the speed to compete, and the Nebula makes this even better thanks to its compatibility with 11.1V LiPo batteries. If you need a lightweight yet rock-solid primary which is ready to go toe-to-toe with the best, the Zion Arms PW9 Long Handguard will be an asset to your gameplay!
- Full metal construction
- Zion Arms Nebula ETU / MOSFET pre-installed
- CNC 7075 T6 Aluminium receiver & handguard
If you usually run an M4/AR-15 platform and you want familiar controls in a platform which looks like nothing else out there, the Zion Arms PW9 Long Handguard is definitely worthy of your scrutiny. This pre-upgraded AR9 SMG platform boasts full metal construction, making use of CNC machined 7075 T6 aluminium in its handguard and receiver for top-tier build quality, high strength and low weight.
On the inside, the PW9 is equally impressive. Featuring a 6.03mm tightbore inner barrel, 8mm ball bearing bushings, a quick change spring system and the Zion Arms Nebula ETU/MOSFET, allowing for burst mode, binary trigger or semi-auto only to be programmed using the fire controls of the gun itself. A 19K RPM high speed motor gives it the speed to compete, and the Nebula makes this even better thanks to its compatibility with 11.1V LiPo batteries. If you need a lightweight yet rock-solid primary which is ready to go toe-to-toe with the best, the Zion Arms PW9 Long Handguard will be an asset to your gameplay!
- Folding stock
- Perfect backup
- Solid alloy body
The insanely iconic SMG-5K, popularised by movies as being every bad guys SMG of choice. This replica has an Alloy body to bring it to a realistic weight, and features a folding stock to make it more useful both indoors and outdoors.
- High density polymer construction
- 6.03mm Tightbore inner barrel
- 20mm Picatinny RAS handguard
If you're put off full metal SMG-5s because of their immense weight, this high density polymer alternative should suit you perfectly! The Golden Eagle SMG-5 A5 RAS replicates the iconic SMG design in its RAS configuration, with 20mm Picatinny rails at 3, 6 and 9 o'clock on the handguard, ready for your mission essential accessories. Up front, we have a QD flash hider mounted to a threaded tri-lug muzzle device, giving you loads of tracer and suppressor mounting options straight out of the box.
On the inside, the G.E SMG-5 is modestly equipped but surprisingly potent for the price. The internals are based around the Tokyo Marui SMG-5, meaning a version 2 gearbox, slider adjustable HOP-up unit and full compatibility with aftermarket TM spec upgrade parts. Improving on the original TM design,Golden Eagle has added 7mm ball bearing bushings into the mix for reduced friction, increased rate of fire and a smoother gearbox report. Another nice little sweetener is the platform's 6.03mm tightbore inner barrel which raises FPS and improves accuracy, saving you a few quid when it comes time to upgrade!
- High density polymer build
- 6.03mm Tightbore inner barrel
- HAL¹ ETU Pre-installed - Programmable fire modes
If you love the AR-9 SMG look but partake in a mix of CQB and woodland skirmishes, the Specna Arms SA-FX02 FLEX™ HAL¹ ETU AR-9 AEG is a fine choice! Made from strong high density polymer with Specna Arms' unique receiver design, the SA-FX02 is the mid-length alternative to the FX01, equipped with a 10.5-inch outer barrel and sound-amplifying muzzle device, offering improved performance at longer range and a menacingly loud "pop" each time the AEG is fired.
Inside, the HAL¹ MOSFET/ETU system provides functionality rarely seen in AEGs at this price. The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original FLEX™ AEG series, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.
An ultra-light and agile build front to back, the FX02 is ideal for those who prefer slimmer AR-9 magazines but seek a more multi-role platform than comparable CQB-optimised AR-9s. Whether this will be your first foray into the Airsoft world or you're an experienced skirmisher seeking a lightweight but advanced backup, the Specna Arms SA-FX02 FLEX™ HAL¹ ETU AR-9 AEG has both boxes ticked!
- High density polymer build
- 6.03mm Tightbore inner barrel
- HAL¹ ETU Pre-installed - Programmable fire modes
If you love the AR-9 SMG look but partake in a mix of CQB and woodland skirmishes, the Specna Arms SA-FX02 FLEX™ HAL¹ ETU AR-9 AEG is a fine choice! Made from strong high density polymer with Specna Arms' unique receiver design, the SA-FX02 is the mid-length alternative to the FX01, equipped with a 10.5-inch outer barrel and sound-amplifying muzzle device, offering improved performance at longer range and a menacingly loud "pop" each time the AEG is fired.
Inside, the HAL¹ MOSFET/ETU system provides functionality rarely seen in AEGs at this price. The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original FLEX™ AEG series, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.
An ultra-light and agile build front to back, the FX02 is ideal for those who prefer slimmer AR-9 magazines but seek a more multi-role platform than comparable CQB-optimised AR-9s. Whether this will be your first foray into the Airsoft world or you're an experienced skirmisher seeking a lightweight but advanced backup, the Specna Arms SA-FX02 FLEX™ HAL¹ ETU AR-9 AEG has both boxes ticked!
- High density polymer construction
- Stockless design - QD Sling point at the rear
- Ideal as a backup platform for a sniper
If your pistol isn't cutting it, perhaps you need a bigger sidearm! Enter the VORSK VMP-1C, the compact variant of the VMP-1 gas blowback SMG. The VMP-1C takes the original and deletes the stock and muzzle device for a more compact form ideally suited to CQB and use as a sniper or support gunner's backup platform.
Like the original, the VMP-1C is constructed almost entirely from high density polymer with an alloy outer barrel and steel trim parts, giving you a lightweight, bite-sized platform with a full-size punch. Inside, the platform boasts a 6.03mm tightbore inner barrel for an edge in accuracy, despite its short barrel length. The stunning rate of fire of the original has been maintained, making this lil SMG great for laying down covering fire as you relocate to a more advantageous firing position. If you need a secondary with more firepower than the average, the VMP-1C is ideal for your needs!
- High density polymer construction
- Stockless design - QD Sling point at the rear
- Ideal as a backup platform for a sniper
If your pistol isn't cutting it, perhaps you need a bigger sidearm! Enter the VORSK VMP-1C, the compact variant of the VMP-1 gas blowback SMG. The VMP-1C takes the original and deletes the stock and muzzle device for a more compact form ideally suited to CQB and use as a sniper or support gunner's backup platform.
Like the original, the VMP-1C is constructed almost entirely from high density polymer with an alloy outer barrel and steel trim parts, giving you a lightweight, bite-sized platform with a full-size punch. Inside, the platform boasts a 6.03mm tightbore inner barrel for an edge in accuracy, despite its short barrel length. The stunning rate of fire of the original has been maintained, making this lil SMG great for laying down covering fire as you relocate to a more advantageous firing position. If you need a secondary with more firepower than the average, the VMP-1C is ideal for your needs!
- Programmable Kestrel V2 ETU
- Side folding skeletonised stock
- High-density polymer construction
The Double Eagle M924 DMP-9 Submachine Gun AEG; Kestrel V2 ETU is a perfect compact CQB SMG. With the addition of the Kestrel V2 ETU, this SMG means serious business! Its lightweight polymer construction is sure to withstand scratches and bumps and the side folding skeletonised stock allows you to turn this SMG into a single-handed machine pistol, not the traditional shooting stance but it works!
Inside the Double Eagle M924 DMP-9 Submachine Gun AEG; Kestrel V2 ETU, we are treated to some reliable straight-out-of-the-box internals. Featuring the star of the show, the Kestrel V2 programmable ETU, paired with 18:1 ratio steel gears which run on 8mm ball-bearing bushings. Also inside is a 6.04mm inner barrel paired with a rotary HOP-up unit, getting you off the mark with some fine accuracy potential.
- Full metal construction - Mostly steel
- Rotary adjustable HOP-up unit
- The iconic British SMG of the Cold War
If you're a British firearms enthusiast you must recognise the L2A3 Sterling SMG, the iconic British submachine gun which served with the British Army throughout the Cold War and beyond. Replacing the STEN gun, the Sterling was everything the STEN should have been, offering improved ergonomics, semi-auto and full auto fire modes and a complex but highly functional folding stock. This SMG was one of the few British firearms squaddies reportedly liked, and the S&T replica matches up with the Sterling's superb reputation in the real steel world.
Constructed almost entirely from steel with all the features one would expect from an authentic Sterling replica, the S&T L2A3 is built like a tank, with the appropriate weight and heft for a realistic experience whether you're skirmishing with it or just fondling it on the sofa. Inside, we have a unique gearbox type with an alloy shell, caged motor and 18:1 ratio steel gears, with a well-concealed rotary adjustable HOP-up unit on the outside of the outer barrel. If you're looking for an old-school SMG or are working on your historic British firearms collection, you need the S&T L2A3 MK4 Sterling!
- Large Battery Space
- Lightweight & Robust
- Battery & Charger Inc.
An Airsoft 6mm BB firing electric AEG designed in the style of the MP5 used by Special Forces around the world. Featuring a lightweight and durable Polymer external construction, this a RIF for those who like to stay light and fast on their feet.
- Optical MOSFET pre-installed
- 1:9 Ratio DSG Gearset
- 25RPS on 11.1V - INSANE!
If you are looking for a serious speed demon of an AEG, the WELL PRO WE06 PPK-20 Compact SMG AEG - Advanced Version is without equal in its price range. Based on the most recent prototype of the PPK-20 SMG, an AK-derived SMG design, the WE06 boasts both M-LOK and 20mm Picatinny accessory attachment interfaces, ambidextrous fire controls and a side folding retractable stock based on that of the AM-17, another advanced Kalashnikov Concern prototype.
On the inside, the WE06 Advanced Version is absolutely insane. Featuring 9:1 ratio high-speed steel gears with a dual sector gear, a programmable optical MOSFET and a 20K RPM high-speed Neodymium magnet motor, this beast kicks out an insane 25 rounds per second with an 11.1V battery! Not content with building an affordable SMG with minigun-like speed, WELL PRO saw fit to install a 6.02mm tightbore inner barrel to improve accuracy and FPS, meaning this lightweight, compact platform can still upset the enemy at range. If you like cutting edge modern SMGs with a unique look and a positively incredible rate of fire, this is what you need!
- UTR45 + Red dot sight
- 2 Extra Mid-cap magazines
- Ideal for CQB and aggressive skirmishers
If you are a mobile, agile and hostile skirmisher, the Double Eagle UTR45 would be an asset to your kit list. We put this pack together to set CQB skirmishers up with one of our favourite platforms and equip it with a red dot sight and pair of spare mid-cap magazines, an ideal setup for a skirmisher who is light on their feet and uses every opportunity to close ground with the enemy and give them what for at kissing distance. With a speedy trigger response and an advanced programmable MOSFET system, the UTR45 is head and shoulders above anything else in its price range!
- Full metal construction - A lot of steel
- Pre-installed optical MOSFET
- High Torque motor - Snappy trigger response!
The ARCTURUS PP-19-01 ZTAC SP1 AEG is certainly a unique-looking SMG, if you like to stand out then this is the one for you! This SMG has an AK origin and is kitted out with plentiful Zco-style furniture, including an extended railed handguard, built-in rail riser and PT-1 multi-adjustable stock. The package also includes a DTK-2 style muzzle brake and a DTK Saiga suppressor, giving you the option to rock the stealthy look or run a beastly muzzle brake for the intimidation factor.
This monster is constructed almost entirely from steel, with a flawlessly realistic finish applied to the externals and the hefty feel that an AK-derived platform deserves. On the inside, things are equally special as the PP-19-01 is rocking an Optical MOSFET, a high torque motor, a plethora of reinforced internal components, a rotary style HOP-up unit and a 6.03mm stainless steel tightbore inner barrel. If you are an AK kind of guy, but you like more modern platforms with a more special ops look, the PP-19-01 ZTAC SP1 AEG will certainly fulfil your wishes!
- Full metal construction
- Steel receiver - Hefty with a realistic finish
- The iconic US Army WW2 SMG
If you are after a caveman simple WWII SMG and the STEN is a bit too unconventional, the M3A1 Grease Gun should suit you well! Derived from the STEN but with a vertically oriented magazine and tanker-style sliding stock, the M3A1 was the US Army's solution to the need for accelerated SMG production during the Second World War.
The Snow Wolf M3A1 is patterned after the original M3A1 Grease Gun, the second Grease Gun variant which saw the ratchet style charging handle deleted. In Airsoft terms, this means the Snow Wolf M3A1 is realistically limited to full automatic only, with the dust cover functioning as a safety catch, just like the real thing. The Snow Wolf M3A1 has a very realistic weight and feel thanks to its majority steel full metal construction and gun metal grey finish. If you love a simple classic the Grease Gun has your name on it!
- Full metal construction
- 6.03mm Tightbore inner barrel
- Gorgeous real wood furniture
If you love a bit of old-school cool or have a thing for Japanese firearm replicas, the S&T Nambu Type 100/40 Submachine Gun AEG; Real Wood should excite you! This beast of a Type 100 replica mimics the real steel Type 100/40, constructed from flawlessly finished alloy and steel with a gorgeous real wood stock to top it off. Externally, this thing is a perfect match for the early war Japanese SMG issued to naval raiders and is perfect for a Japanese Imperial Army loadout or as a wall hanger to dominate the man cave.
Inside, we are treated to some solid internal components, including reinforced steel gears, steel bushings, a quick-change spring system and a high torque motor with a 6.03mm tightbore inner barrel to ensure your BBs fly straight and true. The gearbox shell is a unique shape constructed from alloy and compatible with most V2/3 upgrade parts, though the Type 100/40 shoots superbly straight out of the box. If you like lesser-seen platforms or collect WWII replicas, the S&T Nambu Type 100/40 Submachine Gun AEG; Real Wood should put a massive grin on your face!
- Full Auto Only
- Electronic Trigger
- Electric Blowback
Based off the real world M3 / M3A1 Submachine gun, also known as the 'Grease Gun', this is a high quality replica of an iconic historical weapon.
About Our Airsoft SMGs, including Uzis & More
Our huge selection of tactical Airsoft submachine guns are ideal for your next skirmish, with a range of gas SMGs, electric SMGs and more. Plus, you can rest assured that we only stock the best SMG gun manufacturers on the market - you can find ARES, CYMA, G&G, ICS and more with us.
We offer classic favourites including airsoft Uzis, a replica of the classic Israeli Uzi and the ideal compact primary, as well as the more modern Uzi equivalent, the VORSK VMP-1 GBB SMG. We even offer airsoft replicas of the forever-cool Thomspon submachine gun, known by many as the Tommy Gun. Dominate at your next CQB skirmish with an Airsoft SMG from Patrol Base.
Eager to get in the game fast? Opt for our next day delivery option at checkout and you could be enjoying your new Airsoft SMG by tomorrow. We also offer interest free finance plans and a price match guarantee so you don’t have to worry about price when it comes to picking your next piece. While you’re here, why not explore what else we have in our collection? We have one of the UK’s largest selections of airsoft guns, including airsoft snipers, airsoft shotguns and more. Plus we offer a range of attachments and accessories to boost performance, like red dot sights and holographic sights.
Shop our full collection of Airsoft submachine guns online or visit us at our store in Huddersfield where you can take your SMG of choice out on our dedicated range and get UK next day delivery.