All External Airsoft Parts & Attachments

Constructed from durable alloy and is foam filled to assist in suppressing muzzle sounds. 

The PTS Enhanced Rail Section for M-LOK is an Airsoft modular rail panel designed to be fit onto M-LOK hand guards, providing a 20mm RIS / RAS rail for mounting Picatinny accessories such as torches, lasers, grips and many other aftermarket attachments. The rail is available in several different lengths depending on what you require. This rail has a sleek look, owing to the weight-reducing corner cuts, keeping your M-LOK rail looking slick!

This rail is the perfect purchase for any Airsoft player who has got their hands on a new rifle with an M-LOK attachment system and is looking to take their gun to the next level by attaching parts and accessories.

If you're in the market for a micro tracer unit but you want muzzle flash, the Eshooter FLARE M Tracer Unit with Muzzle Flash is your best bet. This ultra-compact tracer unit rivals the smallest on the market, measuring approximately 5.4cm long with a 2.8cm diameter and offers muzzle flash functionality in a wide variety of colour options along with standard tracer functionality.

Being so small and light, the FLARE M is ideal for mounting on GBB pistols and is also an asset to any CQB skirmisher who requires a tracer that doesn't compromise handling qualities or add too much extra length to their primary. As it comes, the FLARE M is intended to be mounted on 14mm CCW male threaded outer barrels and includes an 11mm CW adapter for use with WE and Armourer Works pistols. If you run a RAVEN or VORSK pistol, use a 12mm CW to 14mm CCW adapter to mount the Flare M. Novritsch or Army Armament pistol owners, no need to feel left out, use a 12mm CCW female thread adapter and you can rock the FLARE M too!

Powered by an internal rechargeable battery and charged via the included USB Type-C charger cable, the FLARE M charges quickly using the most recent cable type and comes with detailed instructions so you can master its wealth of functionality easily. Whether you run an SMG, Rifle, GBB Pistol or sniper rifle, the FLARE M is the perfect way to add tracer and muzzle flash functionality to your setup without adding weight or making your primary unwieldy!

If you're looking for stylish external upgrades for your M4/AR-15, check out the Delta Armory CNC Aluminium Strike M-LOK Handguard! This CNC machined free-floated handguard boasts M-LOK slots at the 3, 6, & 9 o'clock positions with 20mm Picatinny rail along the top, The centre of the upper rail includes a relief cut designed for "C-clamp" or thumb over bore grips but also makes a great spot to mount a pressure switch via velcro or zip ties. This handguard is available in 3 different lengths; 8-inch for CQB builds, 10-inch for mid-length and 13-inch for carbine-length platforms.

Compatibility-wise, this handguard should fit most M4/AR-15 AEG and GBBR rifles with mil-spec receiver threads which is almost all of them. If you want to enhance the aesthetic and accessory options of your M4/AR-15 rifle, the Delta Armory CNC Aluminium Strike M-LOK Handguard will do the trick!

If you're looking for stylish external upgrades for your M4/AR-15, check out the Delta Armory CNC Aluminium Strike M-LOK Handguard! This CNC machined free-floated handguard boasts M-LOK slots at the 3, 6, & 9 o'clock positions with 20mm Picatinny rail along the top, The centre of the upper rail includes a relief cut designed for "C-clamp" or thumb over bore grips but also makes a great spot to mount a pressure switch via velcro or zip ties. This handguard is available in 3 different lengths; 8-inch for CQB builds, 10-inch for mid-length and 13-inch for carbine-length platforms.

Compatibility-wise, this handguard should fit most M4/AR-15 AEG and GBBR rifles with mil-spec receiver threads which is almost all of them. If you want to enhance the aesthetic and accessory options of your M4/AR-15 rifle, the Delta Armory CNC Aluminium Strike M-LOK Handguard will do the trick!

This Airsoft Suppressor is a replica of the PBS-1 which is designed for AK Platform rifles in the real world, but will work with anything that has either a 14mm CCW or 24mm CW Thread. This means it will fit to any replica with a standard thread, but can also directly thread to the Outer Barrel of AK models that have the appropriate thread (such as LCT branded AKs).

This Airsoft Suppressor is a replica of the PBS-1 which is designed for AK Platform rifles in the real world, but will work with anything that has either a 14mm CCW or 24mm CW Thread. This means it will fit to any replica with a standard thread, but can also directly thread to the Outer Barrel of AK models that have the appropriate thread (such as LCT branded AKs).

Not a fan of SMG-5 dioptre sights? I'm not sure how, but if they don't suit you then here's a way you can still shoot sharp with your SMG-5/MP5 AEG. Allows mounting of red dot sights and shorter length magnified optics. Looks extra cool with an MRDS on!

A set of six Polymer 20mm Rails which will fit into KeyMod or M-LOK slots to provide a more standard rail where there normally would not be.

If you want to add more rails to your M4/AR-15 AEG without adding more weight, the Delta Armory 20mm Picatinny RIS Handguard for M4/AR-15 will do the trick! This quad 20mm Picatinny railed handguard is styled after the real steel KAC FF RIS, with 7" or 9" length options rocking 20mm Picatinny rails at all points of the clock, ready for your choice of accessories.

Being a free-floated design, this handguard mounts directly to your receiver threads and doesn't come into contact with the barrel, meaning any force applied to the handguard won't negatively affect accuracy. Installation will probably require an M4/AR-15 barrel nut wrench and a certain level of expertise and fitting, though the handguard should fit the vast majority of M4/AR-15 AEG and GBBR platforms. If you're looking for affordable mods or are working on a lightweight polymer sleeper build, the Delta Armory 20mm Picatinny RIS Handguard for M4/AR-15 is ideal!

If you want to add more rails to your M4/AR-15 AEG without adding more weight, the Delta Armory 20mm Picatinny RIS Handguard for M4/AR-15 will do the trick! This quad 20mm Picatinny railed handguard is styled after the real steel KAC FF RIS, with 7" or 9" length options rocking 20mm Picatinny rails at all points of the clock, ready for your choice of accessories.

Being a free-floated design, this handguard mounts directly to your receiver threads and doesn't come into contact with the barrel, meaning any force applied to the handguard won't negatively affect accuracy. Installation will probably require an M4/AR-15 barrel nut wrench and a certain level of expertise and fitting, though the handguard should fit the vast majority of M4/AR-15 AEG and GBBR platforms. If you're looking for affordable mods or are working on a lightweight polymer sleeper build, the Delta Armory 20mm Picatinny RIS Handguard for M4/AR-15 is ideal!

An ergonomically designed 20mm RIS foregrip, created to promote a comfortable and natural grip on their Airsoft gun. Constructed from high quality polymer with a slightly textured surface.

This Airsoft suppressor is designed to be fit onto 14mm Counter Clockwise (CCW) threads, and is foam filled to reduce the audible output of the weapon. The suppressor is constructed from Alloy, and features a spring core and foam filling, and is finished with US Navy Seal Branding. 

A mock Airsoft suppressor designed to be attached to the end of Airsoft Rifles to give them a more unique look, and to slightly suppress the sound leaving the barrel. This is the perfect purchase for those who are looking for a suppressor that can be attached to a huge variety of weapons, or for those looking to dampen the noise made from the end of the weapon.

A short and compact KeyMod foregrip, designed to be attached to KeyMod Railed Hand Guards to provide an additional control when handling your Airsoft weapon. 

A short and compact KeyMod foregrip, designed to be attached to KeyMod Railed Hand Guards to provide an additional control when handling your Airsoft weapon. 

A very easy to use fore grip that can be locked in a compact or full vertical position depending on your situation and requirements. 

A simple and easy-to-use Vertical Foregrip for Airsoft Replicas, compatible with 20mm RIS/RAS (Picatinny Rail Systems). To install the Grip, simply unscrew the base of the Grip and slide it over the 20mm Rail. Tightening the base of the Grip will raise the middle section of the Grip and lock it into a Rail Slot (if you've aligned it correctly). This will give you a comfortable platform to grip and brace your Airsoft Gun, making for steadier and more viable aiming, even in the heat of the moment.

If your M4/AR-15 AEG is a bit scratched up, the Delta Armory Receiver Set for M4/AR-15 AEG will sort that out! This set includes the upper and lower receiver, fire selector switch and front receiver pin, available in high density polymer or alloy construction. If you're working on a lightweight build, the polymer version is ideal. If you want weight and realism, you want the metal version!

Styling-wise, this receiver set is Delta's own design, inspired by real steel "Billet" receivers found on high-end, ultra-modern real steel AR builds. The trigger guard is enlarged and built-in, improving strength when compared to milspec receiver designs, in line with the latest real steel ARs hitting the market. As we might expect, we are treated to a 20mm Picatinny receiver rail running along the top, ready for a red dot sight, scope or iron sights. 

If you're building from scratch, you will need a charging handle, magazine release, dust cover and mock rear pin to complete the receiver itself, along with your internals and pistol grip. While we can make no guarantees, parts from most other brands should fit this receiver without issues. Whether you need a bargain receiver for a scratch build or want to change the build style of an existing M4/AR-15 AEG, the Delta Armory Receiver Set for M4/AR-15 AEG will do the trick!

A 12mm to 14mm CCW thread adapter which will allow you to attach suppressors to your Raven only series gas blowback pistol.

A tough Polymer foregrip for M-LOK rail systems, is ridged to provide good grip, comes supplied with everything you need to attach it, and provides a more stable platform for manipulating your replica.

An alloy, ambidextrous replacement mag release for M4/15/16 variant rifles that is ready to install right out of the packet.

If you want to use your 20mm Picatinny accessories with a KeyMod handguard, the PTS Enhanced Rail Section for KeyMod is what you need! This 20mm rail section is constructed from Dupont Zytel Polymer and is available in several length and colour options, suitable for any build aesthetic. Like the M-LOK version, this rail has a sleek look, owing to the weight-reducing corner cuts, keeping your rail looking slick and avoiding sharp corners, a major ergonomic pitfall.

If you're dressing up your KeyMod rail but prefer to use your 20mm accessories rather than buying new KeyMod bits, the PTS Enhanced Rail Section for KeyMod is ideal!

If you want to use your 20mm Picatinny accessories with a KeyMod handguard, the PTS Enhanced Rail Section for KeyMod is what you need! This 20mm rail section is constructed from Dupont Zytel Polymer and is available in several length and colour options, suitable for any build aesthetic. Like the M-LOK version, this rail has a sleek look, owing to the weight-reducing corner cuts, keeping your rail looking slick and avoiding sharp corners, a major ergonomic pitfall.

If you're dressing up your KeyMod rail but prefer to use your 20mm accessories rather than buying new KeyMod bits, the PTS Enhanced Rail Section for KeyMod is ideal!

If you want to use your 20mm Picatinny accessories with a KeyMod handguard, the PTS Enhanced Rail Section for KeyMod is what you need! This 20mm rail section is constructed from Dupont Zytel Polymer and is available in several length and colour options, suitable for any build aesthetic. Like the M-LOK version, this rail has a sleek look, owing to the weight-reducing corner cuts, keeping your rail looking slick and avoiding sharp corners, a major ergonomic pitfall.

If you're dressing up your KeyMod rail but prefer to use your 20mm accessories rather than buying new KeyMod bits, the PTS Enhanced Rail Section for KeyMod is ideal!

If you want to use your 20mm Picatinny accessories with a KeyMod handguard, the PTS Enhanced Rail Section for KeyMod is what you need! This 20mm rail section is constructed from Dupont Zytel Polymer and is available in several length and colour options, suitable for any build aesthetic. Like the M-LOK version, this rail has a sleek look, owing to the weight-reducing corner cuts, keeping your rail looking slick and avoiding sharp corners, a major ergonomic pitfall.

If you're dressing up your KeyMod rail but prefer to use your 20mm accessories rather than buying new KeyMod bits, the PTS Enhanced Rail Section for KeyMod is ideal!

If you want to use your 20mm Picatinny accessories with a KeyMod handguard, the PTS Enhanced Rail Section for KeyMod is what you need! This 20mm rail section is constructed from Dupont Zytel Polymer and is available in several length and colour options, suitable for any build aesthetic. Like the M-LOK version, this rail has a sleek look, owing to the weight-reducing corner cuts, keeping your rail looking slick and avoiding sharp corners, a major ergonomic pitfall.

If you're dressing up your KeyMod rail but prefer to use your 20mm accessories rather than buying new KeyMod bits, the PTS Enhanced Rail Section for KeyMod is ideal!

If you want to use your 20mm Picatinny accessories with a KeyMod handguard, the PTS Enhanced Rail Section for KeyMod is what you need! This 20mm rail section is constructed from Dupont Zytel Polymer and is available in several length and colour options, suitable for any build aesthetic. Like the M-LOK version, this rail has a sleek look, owing to the weight-reducing corner cuts, keeping your rail looking slick and avoiding sharp corners, a major ergonomic pitfall.

If you're dressing up your KeyMod rail but prefer to use your 20mm accessories rather than buying new KeyMod bits, the PTS Enhanced Rail Section for KeyMod is ideal!

If you want to use your 20mm Picatinny accessories with a KeyMod handguard, the PTS Enhanced Rail Section for KeyMod is what you need! This 20mm rail section is constructed from Dupont Zytel Polymer and is available in several length and colour options, suitable for any build aesthetic. Like the M-LOK version, this rail has a sleek look, owing to the weight-reducing corner cuts, keeping your rail looking slick and avoiding sharp corners, a major ergonomic pitfall.

If you're dressing up your KeyMod rail but prefer to use your 20mm accessories rather than buying new KeyMod bits, the PTS Enhanced Rail Section for KeyMod is ideal!

Used by the UKSF, this replica suppressor doubles as a tracer unit and attached to your 14mm CCW outer barrel and provides an ultra-realistic muzzle device experience. Featuring a clean, well-weighted alloy design with an aggressive low profile front muzzle.