All External Airsoft Parts & Attachments

For those of you looking to bling out your Hi-capa, you've certainly found the right page! Designed for use with your 5.1 gas blowback Hi-capa, this replacement part will extend the receiver and rail from 5.1 to 7 inch, much like the mighty Hi-capa Dragon!

Constructed from anodised alloy, the frame has a low weight and a sleek, stylish aesthetic. Completing the look is the front compensator, available in your choice of 3 metallic colours. But it's not just about looks, as it will extend the lower rail to allow for 4.5 inches of real estate to mount the tactical devices of your choosing.

The SR Q Furniture Set is a complete Grip/Stock set for AK Platform GBBs (Gas Blowback Guns), and will provide a gorgeous and futuristic all-in-one Pistol Grip and Stock, as well as a comfortable Foregrip to give your AK a sci-fi update! This kit is very easy to install, needing only your Stock and Pistol Grip to be removed, and is the perfect way to give your Airsoft Gun a modern update.

Wan to bling out your VSR Bar 10? Treat your rifle with this 22.5-inch fluted barrel in your choice of either twisted or straight fluting, whichever would suit your loadout more. The PPSH barrel is constructed from extremely lightweight aluminium to help keep you light on your feet during skirmishes.

The fluting has been machined to a perfect uniformity that it sure to give your VSR/Bar-10 a sleek modern aesthetic. In real steel-rifles, fluting helps disperse heat from the barrel, as well as keep the barrel's weight down. At the end of the barrel is a 14mm female CCW thread for use with attaching tactical muzzle devices, such as flash hiders, suppressors and tracer units. Included is a thread cap if you don't fancy running any muzzle devices and like to keep things simple.

Wan to bling out your VSR Bar 10? Treat your rifle with this 22.5-inch fluted barrel in your choice of either twisted or straight fluting, whichever would suit your loadout more. The PPSH barrel is constructed from extremely lightweight aluminium to help keep you light on your feet during skirmishes.

The fluting has been machined to a perfect uniformity that it sure to give your VSR/Bar-10 a sleek modern aesthetic. In real steel-rifles, fluting helps disperse heat from the barrel, as well as keep the barrel's weight down. At the end of the barrel is a 14mm female CCW thread for use with attaching tactical muzzle devices, such as flash hiders, suppressors and tracer units. Included is a thread cap if you don't fancy running any muzzle devices and like to keep things simple.

If you're seeking an ultra-modern suppressor to top off your build, the Airsoft Artisan SCI-6 Style Suppressor w/ 3-Prong Flash Hider is a fine choice. This suppressor is modelled after the real steel SCI-6 and includes all the flawless details and crisp machining we would expect from an Airsoft Artisan suppressor made from CNC aluminium and steel. 

The suppressor body is made from CNC aluminium and the QD collar is made from steel, giving you strength where needed for a lifetime of reliable mounting and removing. The included 3-prong flash hider is also made from steel and is a beautiful piece all by itself; a squat and menacing design well suited to modern rifle builds. If a suppressor with high-end styling is all you need to finish off your dream build, the Airsoft Artisan SCI-6 Style Suppressor w/ 3-Prong Flash Hider is the way to go!

If you own a spring-powered SVD Dragunov, but you're missing the real wood furniture, then this conversion kit should interest you! The Battleaxe SVD Wood Conversion Kit contains a real wood stock and handguard, both of which have been meticulously crafted to ensure a superb and realistic finish. The varnish finish provides a subtle sheen with the wood grain that shows through, faux wood or polymer can never look this good!

Whether you're looking for a centrepiece for your man cave gun display or seeking an exciting, immersive objective for out on site, the Battleaxe M122 American Tripod Replica for M60/MK43 Machine Gun is a fine choice! A detailed replica of the M122 Tripod (formerly known as the M2 Tripod), this beast tips the scales at around 7 kg, and that's before you add your LMG!

Being such a hefty piece of kit, the M122 is ideal for static objective-based gameplay but can also be used on the move if you have a team of strong skirmishers at your service. The set includes the tripod itself, a pintle mount for M60/MK43 replicas and a traverse/elevation mechanism which, when mounted, allows you to precisely aim your LMG and keep it stable while firing.

Compatibility-wise, this tripod is equipped with parts to allow M60 and MK43 replicas to be mounted, including those made by A&K, VFC, LCT and Inokatsu, but likely won't fit other LMGs. If you're rocking an M60 or MK43 and want the full setup, the Battleaxe M122 American Tripod Replica for M60/MK43 Machine Gun is ready when you are!

If you are having trouble reloading your ARCTURUS AK, this should sort it out! The Magwell Spacer for AK-47/74 AEG is designed to fit into the magazine well of any ARCTURUS AK and fill the gap between the HOP-up unit and the front of the magazine well and prevent over-insertion. Unfortunately, this part only works with ARCTURUS AK AEGs and won't fit any other brand as far as we are aware. 

If your CM.041 SMG-5 has a loose or rattly charging handle, this might solve it! The CYMA Charging Handle Spring Catch for SMG-5 is a replacement original part for the CM.041 series and will work on the -SD models but not the -K. This part braces the spring inside the receiver and keeps your charging handle tight and in place. If you pull your charging handle back and there is no spring tension and the handle loosely wanders around in the cocking tube, you probably need a new one of these!

If you're running a Delta Armory DA-P series EU17 GBB pistol and want to reload faster, this is the key! The Delta Armory Extended Magazine Catch for P-Series GBB is constructed from high density polymer, designed specifically for the DA-P series but potentially compatible with other Gen.3 style EU17 frames (no guarantees though!).

This extended magazine release features a textured surface for optimal grip in all weather and is much wider than the standard mag release, making it easier to reach for smaller hands. The set includes the entire mag release assembly other than the spring, though the original mag release spring used in the DA-P series is a perfect fit. A super affordable upgrade to make pistol handling much easier, this Extended Magazine Catch is just what you need to speed up your reloads!

If you are one for hot-swapping your Hi-capa grips, congratulations on taking pure advantage of the modular nature of the platform! These grip screws from CowCow are designed to replace your old, worn-out grip screws so you can continue to swap and change to your heart's content!

If you are one for hot-swapping your Hi-capa grips, congratulations on taking pure advantage of the modular nature of the platform! These grip screws from CowCow are designed to replace your old, worn-out grip screws so you can continue to swap and change to your heart's content!

If you've scratched up your CM.039's rail and you need a replacement, this is exactly what you need! The CYMA 20mm Picatinny Optics Mount for CM.039 AK AEG is a replacement original part for the CYMA CM.039 and CM.039C AEGs but unfortunately won't fit other AKs. The set includes the mounting bolts and the rail itself. 

If you're rocking a Unity Fusion mount, the WADSN Offset Rail for Fusion Mounts should interest you! This CNC aluminium mount is compatible with Unity-style Fusion mounts and provides an offset 20mm Picatinny rail with 5 rail slots, ideal for flashlights and laser aiming modules. This rail mount is only compatible with Fusion style mounts and includes two steel bolts to mount it and the correct Allen key so you don't need to rummage in your toolbox!

The 5KU 7-Slot Picatinny rail for Zco Handguards is an Airsoft modular rail panel designed to fit onto special ZCO hand guards found on ARCTURUS platforms, providing a 20mm RIS / RAS rail for mounting Picatinny accessories such as torches, lasers, grips and many other aftermarket attachments. The rail has 7 slots of Picatinny slots, giving you a great number of slots for some personalisation and mission-essential attachments. This rail has a sleek look, owing to the weight-reducing corner cuts, keeping your M-LOK rail looking slick!

This rail is the perfect purchase for any Airsoft player who has acquired a new ARCTURUS Zco rifle and is looking to elevate their gun to the next level by attaching parts and accessories with more standard attachment interfaces.

Adding a cocking handle to your pistol might seem a bit much, but in the modern-day and age of primary pistols becoming more and more popular the pistol needs to give up some of its concealment characteristics to become more than "just" a sidearm and compete in the modern CQB site. The Tactical Cocking Handle from CowCow is an ideal solution, providing a protrusion on either side of the slide to allow the pistol to be cocked more quickly and easily, even allowing for one finger cocking from either side! This cocking lever adds a whole lot of functionality but is more compact than competition optimised designs, allowing it to still be used with most tactical holsters whilst reducing snags. This cocking lever replaces the back plate of the slide on your TM EU series pistol.

Adding a cocking handle to your pistol might seem a bit much, but in the modern-day and age of primary pistols becoming more and more popular the pistol needs to give up some of its concealment characteristics to become more than "just" a sidearm and compete in the modern CQB site. The Tactical Cocking Handle from CowCow is an ideal solution, providing a protrusion on either side of the slide to allow the pistol to be cocked more quickly and easily, even allowing for one finger cocking from either side! This cocking lever adds a whole lot of functionality but is more compact than competition optimised designs, allowing it to still be used with most tactical holsters whilst reducing snags. This cocking lever replaces the back plate of the slide on your TM EU series pistol.

If your KJ Works pistol or Tokyo Marui compatible 1911 pistol is experiencing magazine catch difficulties, this is the perfect replacement piece for you! The KJ Works Replacement Magazine Catch for 1911 GBB Pistols is a full replacement part. It is constructed from alloy with a steel spring. This is an original replacement piece and a great spare/repair part to pick up if you own a GBB 1911 pistol!

If you are building a custom Hi-capa or 1911 GBB, whether it is for competition shooting or use as a primary pistol for skirmishing, a cocking lever can help speed up your reloads and get you back into the action faster! The CowCow Raw cocking handle is designed for the TM Hi-capa and 1911 GBB pistols and replaces your rear sight with a side-mounted cocking lever which can be installed for use by either left or right-handed users. This cocking handle is compatible with most TM clone GBB Hi-Capas but will only fit 1911s with a rear sight dovetail, not the classic style with the rear sight machined as part of the side.

If you need a handling upgrade for your KeyMod-equipped primary, a stubby VFG will help you steer between targets far faster! The FMA Stubby Vertical Foregrip; KeyMod is constructed from high-density polymer with steel mounting hardware and can be fitted to any KeyMod rail system at a position of your choice. This grip is highly adaptable and can be used in multiple ways, including in a traditional vertical grip hold and with a thumb-over-bore hold. 

The grip has a ribbed exterior to enhance traction and its stubby design means it is far less likely to snag on your sling or other protruding gear. Also present is a storage compartment inside the grip, designed for CR123a batteries but equally capable of housing a small stash of tactical sweets to help you maintain energy and morale while skirmishing. The compartment can be accessed by unscrewing the base of the grip, and even includes a rubber O-ring to prevent moisture ingress. If you usually use a standard VFG and want to upgrade to something more modern, this grip is ideal!

Instantly boost the ergonomics of your ARP9 with this simple, yet effective magazine catch. The widened magazine catch retains the ambidextrous nature of the original catch while making it easier to manipulate as well as operable with your index finger. Allows for drop free reloads just using your trigger finger from your firing grip.

If you own an AK-47S underfolder AEG and you want to elevate its realism, a metal body kit is the key! The CYMA Metal Receiver for TM AK47S AEG is compatible with the CYMA CM.028S and Tokyo Marui AK-47S AEGs and will also fit others as long as they use the Tokyo Marui external design and have an underfolding stock.

The receiver is designed to match the original AK-47S "milled" receiver style, complete with weight-reducing cutouts at the front on either side, steel mock pins for some nice extra detail and engraved Cyrillic fire selector markings, an appropriate nod to realism. At the rear of the receiver, there are cutouts so an underfolding stock can be installed, and there are no conventional stock tangs on this receiver so it is not compatible with the full stock or side folding stock variants of the AK-47 AEG. If you want your AK-47S to be as its creator intended, this metal receiver kit is what you need!

An ultra low-profile and tough Flip Cap for Objective Lenses with an outside diameter of 50-59mm, which has 270° of motion so that your cover can sit vertically or sat back on the scope. This is the perfect way to protect your lens in style when your rifle is not in use or in transport/storage.

A rugged and flexible Eyepiece Lens Cover for Telescopic Scopes with an Eyepiece diameter between 41.5mm and 46mm (1.6-1.8"). It offers a dual position cap and weatherproof defence against the elements. Ideal for protecting your lenses during transport or storage.

A replacement for your Airsoft gun's standard flash hider, this compact 14mm CW threaded compensator is a small way to dramatically alter the appearance of your Airsoft gun. 

The perfect way to securely mount your scope onto your Airsoft gun, allowing you to get the best possible accuracy from your scope when aiming. 

In an intense Airsoft skirmish the adrenaline is flowing, and often with that comes the loss of fine motor skills. If you have ever fumbled a reload at a critical time, you will know what we are talking about! The Aluminium Magwell Type 3 from Airsoft Masterpiece is intended to solve this issue by providing a helpful flared guide to assist you in getting that magazine into the gun quickly and with ease. The wide flare of this magazine well makes it perfect for speed reloads, either in a skirmish or an IPSC competition, and can be particularly useful under pressure!..

If you want to add a bit of style to your Hi-Capa pistol, or you just want an extended magwell for faster and more reliable reloads, the Novritsch SSP1/SSP5 Magwell is what you need. This piece is constructed from CNC-machined Aluminium, guaranteeing a flawless and precise finish. This Magwell is compatible with Novritsch SSP1/SSP5 pistols but may also fit some other Hi-Capa pistols.

Magwell extensions are a fantastic addition for those who value a speedy reload, designed to guide your magazine in and correct for any slight mistakes under pressure. The result is an easier, faster reload and the option for more skilful players to reload "eyes-up", i.e. while continuing to scan for targets without looking down at the pistol.

Improve style and performance with the Novritsch SSP1/SSP5 Magwell, a simple upgrade that will make your reloads faster than the rest.

If you want to add a bit of style to your Hi-Capa pistol, or you just want an extended magwell for faster and more reliable reloads, the Novritsch SSP1/SSP5 Magwell is what you need. This piece is constructed from CNC-machined Aluminium, guaranteeing a flawless and precise finish. This Magwell is compatible with Novritsch SSP1/SSP5 pistols but may also fit some other Hi-Capa pistols.

Magwell extensions are a fantastic addition for those who value a speedy reload, designed to guide your magazine in and correct for any slight mistakes under pressure. The result is an easier, faster reload and the option for more skilful players to reload "eyes-up", i.e. while continuing to scan for targets without looking down at the pistol.

Improve style and performance with the Novritsch SSP1/SSP5 Magwell, a simple upgrade that will make your reloads faster than the rest.

If you want to add a bit of style to your Hi-Capa pistol, or you just want an extended magwell for faster and more reliable reloads, the Novritsch SSP1/SSP5 Magwell is what you need. This piece is constructed from CNC-machined Aluminium, guaranteeing a flawless and precise finish. This Magwell is compatible with Novritsch SSP1/SSP5 pistols but may also fit some other Hi-Capa pistols.

Magwell extensions are a fantastic addition for those who value a speedy reload, designed to guide your magazine in and correct for any slight mistakes under pressure. The result is an easier, faster reload and the option for more skilful players to reload "eyes-up", i.e. while continuing to scan for targets without looking down at the pistol.

Improve style and performance with the Novritsch SSP1/SSP5 Magwell, a simple upgrade that will make your reloads faster than the rest.