All External Airsoft Parts & Attachments

If you're in search of a compact tracer unit with muzzle flash, the Acetech Blaster C Tracer Unit should be at the top of your list! Designed to be as small and lightweight as possible to keep GBB pistols cycling efficiently, the Blaster C is made with an aluminium alloy housing and available in a wide range of exciting colour options to match almost any build style.

The unit is powered by an internal rechargeable battery and recharged via USB Type-C cable (not included), keeping it economical to run and compact in size. By default, the Blaster C mounts to 14mm CCW male barrel threads found on most Airsoft rifles, but is supplied with an 11mm CW thread adapter for WE, Armourer Works and certain other GBB pistols.

Compatible with either red or green tracer BBs with the prerequisite Acetech quality and reliability, the Blaster C also boasts an IP65 water resistance rating, making it ideal for all-weather use. Whether it's going on a pistol or rifle, the Acetech Blaster C Tracer Unit is a highly functional unit you'll never want to turn off!

If you are looking for a new stock, but it needs to be able to house a battery, you are in luck! The Krytac M4/AR15 Battery stock is constructed from high-density polymer with a steel adjustment pin and steel QD sling points on either side. Perfect for those who are bored with the super common crane stock look!

If your CM.097 lower receiver is damaged maybe it is time to replace it with a fresh one! The CYMA Alloy Lower Receiver for CM.097 M4/AR-15 AEG is a replacement original part for the CYMA CM.097 AEG series and is constructed from alloy. The body pins are constructed from steel for maximum strength, and the fire selector markings are finished in a modern style, with coloured bullet pictograms to indicate each mode of fire.

The set includes all body pins, the fire selector, the bolt catch and the magazine release, meaning no fiddling around trying to swap the trim parts from your old receiver, just drop your gearbox straight in!

The Airtech Studios Stock-Butt Stabilizer Unit for ASG Scorpion Evo 3 A1 removes the battle rattle from your ASG Scorpion AEG. Simply remove the pin on the stock and clip the steel stock stabiliser on instead, no more wobbly stock just like that. Its steel construction is sure to survive the rough conditions of any skirmish, and being hidden away in the stock it is unlikely to be affected by the weather as well.

If you are sick of listening to your ASG CZ Scorpion EVO 3 A1 stock rattle all skirmish long and find that it's giving your position away, the Airtech Studios Stock-Butt Stabilizer Unit for ASG Scorpion Evo 3 A1 is exactly what you need to remove this issue completely!

If you're running a KeyMod-equipped primary and want enhanced wet-weather handling, the WADSN Rail Cover Set for KeyMod Rail Systems fits the bill! Packaged as a set of 5 rail covers made from high-density polymer, each cover has a textured surface to improve gripping qualities and can be cut to whatever length is required for the build at hand. If you're finding your KeyMod handguard a bit slippery in wet weather, these covers will solve that issue!

If you're looking for high-quality QD sling mounting hardware, the PTS Low Profile QD Sling Swivel should be on your shopping list. Made from super-robust steel alloy and tested by PTS with a 300kg load, this QD sling swivel will never let you down when it counts!

Designed to mount to QD sling sockets found on many modern handguards, stocks and sling plates, the Low Profile QD Sling Swivel even includes a recessed release button to prevent accidental activation. As always with QD sling swivels, we recommend giving this swivel a hard pull once clicked into your QD socket before applying any weight to ensure your sockets are functional. 

If you're planning to style up your SSP18 GBB, the Novritsch SSP18 Magwell Extension V2 is ideal. Constructed from CNC machined aluminium and available in a plethora of metallic colour options, the Magwell Extension V2 is even compatible with the Novritsch HPA Adapter for EU series/Glock GBB platforms.

Magwell extensions are a fantastic addition for those who value a speedy reload, designed to guide your magazine in and correct for any slight mistakes under pressure. The result is an easier, faster reload and the option for more skilful players to reload "eyes-up", i.e. while continuing to scan for targets without looking down at the pistol. From an aesthetic standpoint, the Magwell Extension V2 works well with the Novritsch Compensator, transforming the SSP18 into a menacing beast with the elite looks of stylish, high-end real steel race guns. 

One of the few problems with old-school cool like the SMG5K series of AEGs is that you are rather limited in rail mounting space, meaning your mission essential equipment that makes you a true operator has to be left behind. Ask the US Navy SEALs, they are known to use pipe clips and zip ties to attach rails to their MP5SD6s. You no longer have to resort to this pure bodgery, with the Extended top rail mount from CYMA you now have a Picatinny scope mount with forward M-LOK sections for tactical weapon lights, lasers, battery boxes, or anything else you need. This is all kept at the 12 o'clock position, keeping your ambi friendly SMG just that. 

Treat your M4 to this Arcturus advanced stock. Constructed from high density polymer, with an angular design and flat textured and rubberised butt plate, this stock is both comfortable and has a sleek, smooth aesthetic that's sure to complement the look of your AR platform.

This stock is for AEG buffer tube, the adjustment lever is contained within the A-frame of the stock, to reduce snagging.

This Upper and Lower Receiver Set is an original replacement part for the APS ASR series M4/AR15 AEGs but may also fit other gearboxes, though it may require modification. The set includes an alloy upper and lower receiver, a bolt catch, charging handle, a magazine release, trigger guard, a steel dust cover and steel body pins. If you are building a spare upper for your APS ASR AEG this would be a perfect fit, but could also be used to add a touch of metal to a polymer M4/AR15 as long as you are okay with potentially undertaking modifications.

Do you find that there are not enough attachment slots on your current MCX handguard? If so then the Airsoft Artisan 10" Spear Handguard Set for SigAir MCX Virtus is for you! It features a modernised design with a 20mm Picatinny rail on top and M-LOK sections at 3, 6 and 9 o'clock, plus additional offset M-LOK slots at the lower diagonals and in line with the gas block cut-out. This is an improvement upon the original MCX handguard as the extra M-LOK slots allow for more attachment space and the added angles mean more customisation is available when it comes to style and ergonomics.

This handguard and barrel are constructed from CNC machined aluminium, which makes them not only very strong but also ensures that they are flawless in their design. The Airsoft Artisan 10" Spear Handguard Set for SigAir MCX Virtus is the best way to give your MCX an external facelift and keep it up to date with the latest MCX variant, the MCX-SPEAR.

If you're running a KSG shotgun and need the enemy team to taste the rainbow, the Acetech Quark K Shotgun Tracer Unit for KSG is how you do it! An innovative combination of the Acetech Quark tracer unit with an integrated flashlight and a design which perfectly matches the unique Keltec aesthetic, the Quark makes the KSG an even more devastating foe in close encounters!

The integrated flashlight can be activated manually or using the built-in gyroscopic motion sensors, turning the flashlight on when the shotgun is levelled and off again when elevated or lowered. Strobe mode is also an option, allowing you to dazzle the enemy as you breach a room and conceal your position in an intense CQB scenario.

Like the legendary Acetech Bifrost Tracer, the Quark K offers a vast range of colour mode options, the ability to light up both Red and Green tracer BBs and a rainbow muzzle flash mode so bright it will even light up standard BBs for the first meter or so of their journey downrange. Power is supplied by an internal rechargable Li-ion battery which is charged via the included USB Type-C cable, keeping this beastly device cost-effective and convenient.

A device which makes the KSG look even more badass than it did without it packing functionality other platforms can only dream of, the Acetech Quark K Shotgun Tracer Unit for KSG is incredibly versatile and equally effective in game!

A multi-position Sliding Stock for AEG Buffer Tubes, that is designed to look like the Stock that comes supplied on the AK-12 and AK-15 rifles. It is constructed from a tough Polymer and is easily installed by squeezing the Stock Adjustment Lever and sliding it over the Buffer Tube. There is a QD Sling Socket on either side of the Stock for the connection of a Quick Release Sling Loop, and a thick Rubber Butt Pad provides grip and comfort in the shoulder.

The Novritsch SSP18/TP22 Extended Magazine Base is a CNC machined extended magbase for the TP22 magazine, Light G-series Mag (28 BBs) & the SSP18 Magazine V2. With this fancy upgrade, your mags can carry six more BBs and an extra 15% gas capacity. 

If you intend to use this with the TP22 magazine, you will need the SSP18 V2 Gas Magazine Inlet valve. If you want to make some of your pistol magazines look extra cool and stand out on the battlefield, you definitely need the Novritsch SSP18/TP22 Extended Magazine Base

As this is a very technical upgrade, we recommend you only try and fit it if you are confident in your abilities and understanding.

The Novritsch SSP18/TP22 Extended Magazine Base is a CNC machined extended magbase for the TP22 magazine, Light G-series Mag (28 BBs) & the SSP18 Magazine V2. With this fancy upgrade, your mags can carry six more BBs and an extra 15% gas capacity. 

If you intend to use this with the TP22 magazine, you will need the SSP18 V2 Gas Magazine Inlet valve. If you want to make some of your pistol magazines look extra cool and stand out on the battlefield, you definitely need the Novritsch SSP18/TP22 Extended Magazine Base

As this is a very technical upgrade, we recommend you only try and fit it if you are confident in your abilities and understanding.

The Novritsch SSP18/TP22 Extended Magazine Base is a CNC machined extended magbase for the TP22 magazine, Light G-series Mag (28 BBs) & the SSP18 Magazine V2. With this fancy upgrade, your mags can carry six more BBs and an extra 15% gas capacity. 

If you intend to use this with the TP22 magazine, you will need the SSP18 V2 Gas Magazine Inlet valve. If you want to make some of your pistol magazines look extra cool and stand out on the battlefield, you definitely need the Novritsch SSP18/TP22 Extended Magazine Base

As this is a very technical upgrade, we recommend you only try and fit it if you are confident in your abilities and understanding.

If you've been looking for some extra rail space on your Novritsch SSR90, this is for you! The Novritsch SSR90 M-LOK Extension mounts to the front of your SSR90 using a screw on either side. Once attached, you have access to an additional 6 M-LOK slots, 2 on top and 4 on the offset angles.

The mount is also designed to be compatible with suppressors, meaning they will not interfere with one another when both are mounted on your platform. If you're looking for some additional rail space, to mount all the mission essentials, then the Novritsch SSR90 M-LOK Extension is exactly what you need.

Fed up with fiddling when you want to switch to fun mode? TTi have you covered with the Extended Charging Handle w/Selector Switch. This set includes an extended charging handle which mounts over the top of the AAP-01 bolt and can be installed on either side, providing a protruding trigger style handle which can be racked with a single hand. Built into the rear of the charging handle we also have a low profile rotary selector lever, which means when you want to switch fire modes its no longer necessary to lock the bolt back and waste precious seconds routing around for the switch! This would be the perfect pairing for an AAP-01 in a carbine kit!

Fed up with fiddling when you want to switch to fun mode? TTi have you covered with the Extended Charging Handle w/Selector Switch. This set includes an extended charging handle which mounts over the top of the AAP-01 bolt and can be installed on either side, providing a protruding trigger style handle which can be racked with a single hand. Built into the rear of the charging handle we also have a low profile rotary selector lever, which means when you want to switch fire modes its no longer necessary to lock the bolt back and waste precious seconds routing around for the switch! This would be the perfect pairing for an AAP-01 in a carbine kit!

If you want to take pure advantage of the upgraded internals of your SSP18 GBB, the Novritsch Minimalist Carbine Kit is what you need! This setup adds a CNC aluminium chassis to the SSP18 GBB pistol with a 20mm Picatinny rail up top, a high-density polymer side folding USW-style stock and a holster lug for the Novritsch Universal Holster on the left side.

This transforms the SSP18 from an impressive pistol into a uniquely functional GBB SMG with holster compatibility and the ability to mount a red dot sight or scope. The addition of a stock alone will allow for more accurate long-range shots and allow upgraded internals of the SSP18 to really shine through. Whether it is a sidearm or your primary, the Minimalist Carbine Kit paired with the SSP18 GBB is a phenomenal combination!

If you're seeking ergonomic upgrades for your M4/AR-15 AEG, the EMG DD Tornado Pistol Grip for M4/AR-15 AEG will give you the luxurious experience you deserve! This pistol grip is styled to match the real steel Daniel Defense Tornado pistol grip and also features EMG logos hidden inside the rubber over-mould. 

With a comfortable design featuring a finger groove on the front and thumb index points on either side, the lower part of the Tornado grip is coated in rubber, providing extra grip for the palm and keeping your platform firmly in your hands during energetic movement in wet weather. If you're unhappy with your current M4/AR-15 AEG pistol grip, the EMG DD Tornado Pistol Grip will give you comfort and traction in equal measure!

If you want to restore the factory fresh look to your workhorse AK, this part may be of use. The Rear Sight Block for the CM.04x Series is an original replacement part for AKM and AK74 rifles of the CM.04x series. This part will not work on AKS-74U AEGs, but should otherwise fit AKs which use the LCT style of construction. The sight block is constructed from alloy and comes with steel pins to mount it, and includes the handguard disassembly lever but does not include the rear sight or the rear sight leaf spring. The surface finish of this part is a rough textured finish which is a close match for the hard-wearing paint applied to Russian AK variants of the 1960s and onwards.

A 6mm BB Airsoft replica flash hider, designed for CYMA manufactured AK47 and AK74 replica Airsoft Electric Guns. This replica flash hider is an incredibly simple yet effective way to add an additional element of realism to your AEG AKs.

If you want to take full advantage of the incredible long-range performance of your Novritsch SSX23, the Novritsch 20mm Picatinny Slide Rail for SSX23 NBB will help! This aluminium 20mm Picatinny rail mount fits directly to the SSX23 slide, packaged with the correct screws to get it mounted straight away. This means you can fit a compact red dot sight to your SSX23, increasing long-range accuracy and target acquisition speed by removing the need to properly align the fibre optic sights. 

While you might not use them often with your red dot sight mounted, the fibre optic sights of the SSX23 are not obstructed when the rail is installed, meaning if your red dot battery runs out mid-firefight you can still land hits with ease!

If you need a stylish finishing touch for your M-LOK build, the Airsoft Artisan AD M-LOK Hand Stop is the perfect addition! Made from superb quality CNC-machined aluminium with realistic details and a rock-solid finish, this hand stop mounts to M-LOK attachment slots and only takes up a single slot, making it ideal for short platforms with limited space.

The AD Hand Stop can be oriented in either direction, ideal for limiting your hand position and avoiding overshooting the handguard after a reload or using as a foregrip to pull your primary back into your shoulder to keep it controlled. Its curved profile makes it comfortable in either orientation, and its textured surface provides optimal gripping qualities in any weather condition. If you're dressing up your M-LOK primary, the Airsoft Artisan AD M-LOK Hand Stop is a highly functional and aesthetically pleasing option!

If you need something to support the weight of your sniper rifle or DMR setup, you can't go wrong with a Novritsch Harris Lug Rifle Bipod! This bipod is compatible with common Harris-style sling/bipod lugs found on the stocks of most sniper rifles, including the SSG10 A1 and A2. 

Constructed from strong aluminium with a steel sling loop built-in, this bipod boasts adjustable leg length via the pair of catches on each and the bipod feet are made from rubber for great gripping qualities. The legs can be deployed and stowed in an instant by pulling them into position. If you find yourself sniping from a static position more often than not, this bipod will be an asset to your setup!

Are you in need of a replacement slide for your Novritsch non-blowback gas pistol? The Novritsch SSX23 Metal Slide is exactly what you need! It is identical to the stock pistol slide that comes with the SSX23, meaning it is easy to drop in and install as it is designed specifically for the pistol. It is constructed from aluminium, making it strong and lightweight, perfect for quick draws but without the risk of the slide cracking if its dropped.

The slide has fibre optic iron sights preinstalled on top of it, just like the stock pistol, it saves the hassle of having to find additional aftermarket iron sights! This replacement slide also features optics-ready functionality if you add a Novritsch SSX23 Red Dot Plate V2 or SSX23 Slide rail.

Replace your old damaged slide, or add the Novritsch SSX23 Metal Slide to a different non-blowback gas pistol from brands such as Tokyo Marui, Stti, KJW and ASG to reinvent their design and make your own unique pistol!

If you're into cutting edge real steel kit, the PTS Syndicate Unity Tactical FAST LPVO Scope Mount Set should put a smile on your face! Made from 6000 series aluminium alloy machined using CNC technology to the high standards we all expect from PTS, this mount set is licenced by Unity Tactical and includes gorgeous trademarks across the design, furnishing anything it is mounted to with the elite, "gucci" look.

The set includes a dual ring mount designed to position the mechanical centreline of your scope at 2.05-inches above the rail, giving you a slightly higher mount than most. This is great for modern shooting stances and a fantastic feature for Airsoft skirmishers running lower face masks, giving you a more comfortable neck position so you can concentrate on landing those hits. Also included is an offset sight adapter, an RMR adapter plate and an Aimpoint Micro adapter plate, allowing you to run an offset back-up red dot sight without the hassle of sourcing the correct mounting hardware.

If you seek the versatility of an LPVO with an offset red dot sight and want a premium quality mount with slick licensed markings and everything you need to get set up included, the PTS Syndicate Unity Tactical FAST LPVO Scope Mount Set is the best option out there!

If you're into cutting edge real steel kit, the PTS Syndicate Unity Tactical FAST LPVO Scope Mount Set should put a smile on your face! Made from 6000 series aluminium alloy machined using CNC technology to the high standards we all expect from PTS, this mount set is licenced by Unity Tactical and includes gorgeous trademarks across the design, furnishing anything it is mounted to with the elite, "gucci" look.

The set includes a dual ring mount designed to position the mechanical centreline of your scope at 2.05-inches above the rail, giving you a slightly higher mount than most. This is great for modern shooting stances and a fantastic feature for Airsoft skirmishers running lower face masks, giving you a more comfortable neck position so you can concentrate on landing those hits. Also included is an offset sight adapter, an RMR adapter plate and an Aimpoint Micro adapter plate, allowing you to run an offset back-up red dot sight without the hassle of sourcing the correct mounting hardware.

If you seek the versatility of an LPVO with an offset red dot sight and want a premium quality mount with slick licensed markings and everything you need to get set up included, the PTS Syndicate Unity Tactical FAST LPVO Scope Mount Set is the best option out there!

If you've lost an SR25 selector switch, this should be helpful! The CYMA Selector Switch Set for CM.098 SR25 AEGs is a replacement original parts set for the CM.098 SR25 series and includes the left and right side selector switches, mounting screws, springs and ball bearings for that lovely "click" between modes.

The switches themselves are constructed from alloy and match the KAC-style selectors found on the CM.098 series, including the scallop on the right side selector and the undercut on the left side selector to allow for full auto fire. Selector switches are always going missing, but with this set handy, your CM.098 won't miss a beat even if the worst happens!