All External Airsoft Parts & Attachments

If you have had a mishap and scratched the lower receiver of your ARCTURUS full metal M4 platform we have just what you need to make it pretty again! The ARCTURUS alloy Lower Receiver For M4/AR15 AEG is an original replacement part for the ARCTURUS full metal M4 AEG series intended to replace a scratched or otherwise damaged lower. The lower receiver doesn't include any of the controls, body pins or trim parts so you will need these parts from your original lower to complete it.

Compatibility wise this part is intended only for the ARCTURUS full metal M4/AR15 AEG line and is unlikely to work with other brands' upper receivers.

If you've put a strong spring in your SSG10 and want to cock it easily, the Novritsch Enlarged Bolt Handle for SSG10 is what you need! Constructed from aluminium with a deeply textured surface, this bolt handle is designed to provide extra purchase for easier cocking and faster follow-up shots.

The Enlarged Bolt Handle is also shaped to provide clearance for any optical sight you may have mounted, avoiding smashing your knuckles on your scope when working in a hurry. Whether you need more grip on your SSG10 for wet weather skirmishes or faster follow up shots the Novritsch Enlarged Bolt Handle is ideal for the job!

If you're moving away from standard scope rings in favour of something more modern and lightweight, the Novritsch One-Piece 20mm Picatinny Scope Mount; 25mm Tube is ideal. This single-piece scope mount follows modern trends, combining the front and rear scope ring for a more robust combination setup which is easier to mount as a bonus. 

Its aluminium construction keeps the weight of the One-Piece 20mm Picatinny Scope Mount to a minuscule 138 grams and its raised optical centreline means your scope sits slightly higher than usual, ideal for those who like to keep their knashers protected behind a face mask while skirmishing. Each ring also includes a single slot of 20mm Picatinny rail, ideal for micro red dot sights, Runcam/action cameras or whatever other equipment you need to complete the mission at hand!

Compatibility-wise, this mount should fit any LPVO or Rifle Scope with a 25mm monotube but will not fit 30mm monotube optics. If you want a more advanced scope mounting solution for your primary or have trouble looking through your scope due to your face-pro choice, the Novritsch One-Piece 20mm Picatinny Scope Mount; 25mm Tube is what you need!

If you want a way to lengthen your primary without adding excess weight, the Laylax 9 Inch Carbon Fibre Barrel Extension is what you need. This barrel extension is constructed from carbon fibre instead of the usual alloy or steel, giving it a miraculously low weight of only 41 grams and the eye-catching looks of carbon fibre texture.

Barrel extensions are a great way to change your build without needing to change the outer barrel itself, offering a simple installation provided your original barrel has 14mm CCW male threads at the tip. If you're building a DMR from an SBR and already have a longer inner barrel, the Laylax 9 Inch Carbon Fibre Barrel Extension will keep it covered with speedy-looking carbon fibre and give you threads for a tracer, suppressor or flash hider at the tip!

If you need a scope mount with some interesting tricks up its sleeve, the Novritsch One-Piece 20mm Picatinny Scope Mount V2; 25/30mm Tube is exactly that! Constructed from aluminium with a QD 20mm Picatinny mounting interface, the One-Piece 20mm Picatinny Scope Mount V2 is easy to mount to any 20mm Picatinny rail and is nice and lightweight, tipping the scales at a surprisingly low 200 grams.

The V2 is compatible with either 25mm/1-inch or 30mm monotubes, making it useful for almost every magnified rifle scope out there thanks to the included ring spacers. On the top of each ring, we are treated to mounting holes for the included modular 20mm Picatinny rail section, allowing you to fit it to the front or rear ring and install a Runcam, micro red dot sight or whatever else you fancy. The V2 is set at the standard (for AR platforms) optical centreline height, making it ideal for most Airsoft platforms but if you need something a bit higher, check out the original One-Piece 20mm Picatinny Scope Mount; 25mm Tube!

Integral to the mount's design and visible from the rear we also have a bubble level, allowing you to ensure your rifle is perfectly horizontal before taking that key, game-winning shot. If you love a lightweight scope mount which is easy to fit and packs in a lot more functionality than its rivals, the Novritsch One-Piece 20mm Picatinny Scope Mount V2; 25/30mm Tube will suit you perfectly!

If you are in the process of adding some custom flair to your AAP-01, this part may be of interest to you! Introducing the Action Army Thumb Stopper for the AAP-01 Assassin GBB pistol, a "Gas Pedal" style thumb stop constructed from aluminium using CNC processes. This part is intended to provide additional recoil control and encourage a consistent grip by giving your thumb a place to rest, and letting you apply downforce to the muzzle to keep those full auto bursts under control!

If you are in the process of adding some custom flair to your AAP-01, this part may be of interest to you! Introducing the Action Army Thumb Stopper for the AAP-01 Assassin GBB pistol, a "Gas Pedal" style thumb stop constructed from aluminium using CNC processes. This part is intended to provide additional recoil control and encourage a consistent grip by giving your thumb a place to rest, and letting you apply downforce to the muzzle to keep those full auto bursts under control!

If you want the slickest KRISS® Vector around, this stock adapter is a great start! This Laylax 1913/20mm Picatinny Stock Interface is compatible with both the KRYTAC KRISS® Vector AEG and GBB, allowing you to fit any 1913/20mm Picatinny stock you need to complete your mission. The interface is constructed from CNC machined aluminium with steel bolts to secure it and features a QD sling socket on each side, ready for QD sling swivels. 

The wealth of 1913/20mm Picatinny stock options expands with each passing day. If you want access to all the latest stock options to hit the market for your Vector, this is the best way to do it!

If you want to turn your Hi-capa into a sci-fi looking speed demon, the Custom "Gungnir" slide from Laylax Nine Ball is about the best solution! This slide is constructed from high density polymer, meaning it tips the scales at an astonishingly low 43g! This also includes an integrated optics mounting plate, and two sets up back up iron sights, ready in case your optic goes down. This is the lightest slide we sell by a wide margin, and the lighter your slide the faster your pistol will cycle!

If you want to turn your Hi-capa into a sci-fi looking speed demon, the Custom "Gungnir" slide from Laylax Nine Ball is about the best solution! This slide is constructed from high density polymer, meaning it tips the scales at an astonishingly low 43g! This also includes an integrated optics mounting plate, and two sets up back up iron sights, ready in case your optic goes down. This is the lightest slide we sell by a wide margin, and the lighter your slide the faster your pistol will cycle!

If you want to turn your Hi-capa into a sci-fi looking speed demon, the Custom "Gungnir" slide from Laylax Nine Ball is about the best solution! This slide is constructed from high density polymer, meaning it tips the scales at an astonishingly low 43g! This also includes an integrated optics mounting plate, and two sets up back up iron sights, ready in case your optic goes down. This is the lightest slide we sell by a wide margin, and the lighter your slide the faster your pistol will cycle!

A high quality replica suppressor for Airsoft weapons, complete with replacement 'Birdcage' type Flash Hider to attach onto.

If you need something to dangle your P90 from while you do more important work, this sling point will do it! The Laylax Sling Mount w/QD Socket for P90 AEG is compatible with the Tokyo Marui P90 and clones of the TM design, allowing you to use either a QD sling swivel or a conventional hook sling to carry your pride and joy.

The QD sling mount is constructed from aluminium and the D-ring is high density polymer, with the complete system mounting with a robust rubberised fabric strap. This setup is a major advancement over older P90 sling mounting apparatus, and if you like your lil spacegun at the cutting edge, this is essential!

If your primary is a SigAir MPX, MCX or has a 1913 Picatinny stock adapter you now have one more stock option thanks to Laylax! The Lightweight M4/AR-15 Stock Tube Adapter is designed to mount to a 1913/20mm Picatinny stock adapter or the built-in 1913 stock mount on the MPX and MCX platforms and provides a 6-position M4/AR-15 buffer tube constructed from aluminium, ready for any M4/AR-15 sliding stock you fancy. 

The buffer tube is machined to allow for wire routing in rear-wired setups and has a threaded rear cap to keep your battery well clear of dirt and debris. The main perk of this stock adapter is its remarkably low weight, tipping the scales at a mere 140g thanks to its aluminium construction. If you want a more conventional stock option for your 1913/20mm Picatinny stock equipped AEG or GBBR this is perfect for the job!

If you like the style of micro red dots and want to mount one on your rifle at a comfortable height, then you need this! The PTS Syndicate Unity Tactical Fast™ MRDS mounts on 20mm Picatinny rails and includes an MRDS Adjustable Plate that fits most micro red dot footprints. These footprints include Docter, RMR®, Shield RMS/ RMSc, Sig Romeo Pistol Red Dot Sight, C-more, Sightmark M-Spec, Holosun-K and DeltaPoint® Pro footprint red dot sights.

It is constructed from CNC 6000 aluminium, making it durable and lightweight, perfect for agile skirmishers who like to keep a low profile on the battlefield. If you aim best with a micro red dot and want to comfortably mount one on something other than your pistol, you need the PTS Syndicate Unity Tactical Fast™ MRDS Mount w/MRDS Adjustable Plate!

Turn your regular airsoft rifle into a DMR-ready monster with the Novritsch DMR Stock. It doesn't only look the tactical part, but it also features a fully adjustable and modular cheek rest so you can line up the perfect shot without the neck pain! This is a must-have for any semi-auto skirmisher who wants a stock that will ensure the edge over their opponent. It is designed to fit over a regular AR/M4/M16 buffer tube, both electric and gas-powered rifles.

The smallest Tracer Unit in the world just got better! Now with multiple functions including tracer and new muzzle flash to add incredible realism to your games, Compatible with both 14mm CCW and 11mm CW Pistol Threads, the Spitfire Tracer Unit will help you to own the night. This new Spitfire Muzzle Flash tracer unit is a massive improvement to other tracer units.

This Folding and Sliding Stock is designed for AK Models that have the Skeleton Triangle Side-Folding Stock as standard, and is constructed to a great standard from Aluminium. It has a Thick Rubber Cheek Rest and Butt Pad, both of which can be adjusted for height, and the whole Stock can be made longer to suit all shapes and sizes of user.

Looking for one of the best PDW stocks on the market, both in form and function? The Krytac Trident PDW stock is what you've been searching for! This stock is constructed with steel stock bars and a steel locking mech to guarantee effective long term function and has a uniquely modern style that was until now exclusive to the Krytac Trident PDW AEG. This PDW stock is remarkably compact, with no wasted space whatsoever and enough room for a standard buffer tube type 7.4V LiPo 1300mAh stick battery with space to spare. If you are building a custom PDW AEG, the Krytac CSS2 PDW stock's compact and well thought out design makes it hard to beat!