All Airsoft Guns

If you are fan of historical rifles, or you partake in historical re-enactment, get excited, that's an order! The Lee Enfield Rifle No.1 MK.III has just dropped in Airsoft form! The S&T S.M.L.E is authentically constructed, with a real wood stock and metal wherever there is metal on the real rifle and is indistinguishable from the real thing in all ways but one; this one fires 6mm BBs!

Spare magazines are available here.

If you are looking for an Airsoft starter kit with everything you need to get skirmishing included, you have found it! The Delta Pioneer Starter Bundle includes the impressive NUPROL Delta Pioneer Defender AEG; an M4/AR15 platform made from robust high density polymer with a rock solid metal V2 gearbox and a 6.03mm tightbore inner barrel, giving you a lightweight and strong starter platform with little to go wrong and superb performance out on the field. The Defender is available in a classic Black, tactical Tan or stealthy Grey colour scheme, and is also available in VCRA complaint Pre Two-Tone blue for those who don't have their UKARA membership yet!

The Defender is packaged with a 9.6v 1600mAh Ni-MH Battery and Charger, giving you a reliable power source and all the performance you could want!

Also included in the set is a bag of Delta Armory's 0.25g BBs, which are the go-to weight for most Airsoft skirmishers, offering superb wind resistance for shooting outdoors with enough projectile speed to give the enemy nowhere to run! Delta Armory BBs are a staff favourite with their highly polished surface providing excellent accuracy and their ultra-tight tolerances which minimise the chances of a jam.

This bundle includes everything you will need to get stuck in and get off to a flying start on your Airsoft adventure; the only thing left to buy is your choice of eye protection!

If you are after a modern sniper rifle platform with a cutting edge look and upgraded internals straight out of the box, the CYMA CM.708-U should be right up your street! This rifle is the upgraded version of the original CM.708 and boasts a steel cylinder with a low friction coating, a brass cylinder head, an aluminium piston with a rubber shock-absorbing pad and a 90-degree piston catch/sear. 

These components combine to improve the lifespan of the CM.708 and improve its air seal qualities and reduce friction in the action for a higher quality feel and an easier bolt pull. Why not save yourself the trouble of upgrading your sniper rifle and get one with all the trimmings straight from the factory?

A Pump Action, Spring Powered Tri-Burst Airsoft Shotgun, which accepts an Airsoft Shotgun Shell inside the breech, and will fire three BBs which each Trigger pull. This tactical variant comes supplied with a 12ga Choke and 20mm Receiver Rail, as well as a Shell Holder, Speedloader and Shotgun Shell.

A high quality AUG Bullpup rifle delivering crisp shot after shot action. With a quick change spring gearbox and enough rails for all your accessories, you can go hit the field with reliability and consistency all day long.

If you need a backup platform with a bit more firepower than a pistol, the Panic Button Bundle should do the trick! This bundle includes the HFC HG-203 MAC-11 GBB Submachine Gun, 2 spare magazines, a can of NUPROL 2.0 Green Gas, and a bag of Delta Armory's 0.25g BBs to get you started with the spray and pray life!

A 6mm Airsoft Gas Blowback Pistol, based on the B9 handgun, given a modern and Secret Agent inspired make-over. This Airsoft Replica Pistol features a realistic Blowback action that simulates recoil, and is the perfect companion to any Airsofter who wants to be more effective in CQB situations.

Get into Airsoft skirmishing with a modern tactical variant of the world renowned and iconic AK47.

With it's tried and true design, this AK makes for a great starter rifle and a great budget friendly gun that is reliable, thanks to it's alloy internals, barrel and top cover and also lightweight thanks to it's polymer construction.

The CM.028A comes with some tactical upgrades such as 20mm RIS/RAS railed handguard and threaded barrel to attach your favourite accessories.

Included in the package is a 525rnd Hi-cap magazine so you're ready to go with a huge BB capacity allowing you to lay down some serious supressing fire right out of the box..

A super compact Airsoft Single Shot 6mm BB Shotgun, based on the M870 designed for Breaching through doors and going into buildings.

With this simple trick, you can turn one gun into two guns! The M203 under-barrel grenade launcher is heavy, manly, and ready to shower an unlucky opponent with a cloud of BBs! This is the 9 Inch short variant, ideally suited to mounting to an M4A1 with a 14.5-inch or 10.5-inch barrel, though it will fit all M4 variants and anything with a 20mm rail on the handguard (or elsewhere, heretics!) with the included 20mm Picatinny rail adaptor.

If you're searching for a new M4/AR-15 platform for CQB, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is one to watch. This uniquely styled AR is based on the real steel GrandPower Firearms R15 FREYA™, a modern M4/AR-15 with a skeletonised receiver design intended to improve handling and agility. This translates directly to the Delta Armory FREYA™ AEG which boasts a skeletonised receiver and M-LOK handguard, giving it an unnaturally low weight of only 2.1kg despite its realistic full metal build. This is the generation 2 FREYA™ and is kitted out with all the best bits from the ETU series paired with the EAGLE™ MOSFET. A match made in heaven if you ask us!

Inside the version 2 gearbox, we are equipped with CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

The EAGLE™ programmable MOSFET of the original FREYA™ remains, offering even more modes than the previous Delta Armory ETU. These include 3 or 5-round burst, binary trigger, sniper delay, semi-auto only, AUG mode, precocking and active braking. If you love an AR as advanced on the inside as it is externally, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is what you need!

If you're searching for a new M4/AR-15 platform for CQB, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is one to watch. This uniquely styled AR is based on the real steel GrandPower Firearms R15 FREYA™, a modern M4/AR-15 with a skeletonised receiver design intended to improve handling and agility. This translates directly to the Delta Armory FREYA™ AEG which boasts a skeletonised receiver and M-LOK handguard, giving it an unnaturally low weight of only 2.1kg despite its realistic full metal build. This is the generation 2 FREYA™ and is kitted out with all the best bits from the ETU series paired with the EAGLE™ MOSFET. A match made in heaven if you ask us!

Inside the version 2 gearbox, we are equipped with CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

The EAGLE™ programmable MOSFET of the original FREYA™ remains, offering even more modes than the previous Delta Armory ETU. These include 3 or 5-round burst, binary trigger, sniper delay, semi-auto only, AUG mode, precocking and active braking. If you love an AR as advanced on the inside as it is externally, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is what you need!

The Novritsch SSR90 is a radical reinvention of the P90 PDW concept, bringing this ageing spacegun into the 21st century with a significant external overhaul and the usual Novritsch compliment of pre-upgraded internals. 

With a new M-LOK upper receiver, skeletonised trigger, QD sling points and a newly designed rubberised butt plate, the SSR90 has far more attachment interfaces than the original P90, better handling and a far shorter trigger pull, ideal for CQB bouts. The body is made from fantastic quality reinforced polymer and to make matters even sweeter, the SSR90 can be kitted out with Novritsch Rail Extension for even more accessory space or the Minimal Receiver Conversion for an even more unique aesthetic. 

What is sure to turn heads is its phenomenal performance, particularly in terms of rate of fire and long range accuracy. This thing hits 17 rounds per second on a 7.4V LiPo battery, which is outlandish, to say the least. With a Maple Leaf HOP-up rubber and a newly designed TDC HOP-up unit, a 6.03mm tight bore inner barrel and a programmable ETU/MOSFET control unit, the Novritsch SSR90 FN Herstal P90 AEG Submachine Gun sure means business when it comes to performance!

This Airsoft Electric Gun is an M4 Platform replica made under license from Barrett, and offers the stunning Nautilus Gearbox in a robust and medium-length package which is happy to perform indoors and out.

This Airsoft Electric Gun is an M4 Platform replica made under license from Barrett, and offers the stunning Nautilus Gearbox in a robust and medium-length package which is happy to perform indoors and out.

Whether you are a pump action shotgun fan or you fancy a change of pace for CQB, the CM.370M M1014 M4 Super 90 Full Stock will be an asset to your game, if you have the skills that is! This shotgun is built on the proven Tokyo Marui tri-shot design but boasts full metal construction to make it more realistically weighted with the cold, means business feel of metal in the hands.

If you are building a British Army or USMC loadout, this shotgun is ideal to throw on a sling and keep handy for close encounters, especially if you are the type that is through the door first, leading from the vanguard. Whether you are a CQB specialist or you want a realistic shotgun secondary to enhance your loadout, the CYMA CM.370M is a great choice!

If sniping is your skirmish role and you want something that isn't an L96 or VSR platform as your primary, the AGM Dragunov SVD will give you the unique rifle you need! This Dragunov SVD replica is a single-shot straight pull bolt action, meaning it falls within the same rules as a standard sniper rifle but with the uniquely iconic look of the bad guy sniper rifle. With full metal on the outside and your choice of high-density polymer or stunning real wood furniture, from a looks standpoint, this SVD ticks all the boxes!

On the inside, we are treated to a 6.02mm tightbore inner barrel measuring a whopping 600mm in overall length, meaning superb accuracy and range potential, if you do your part. The main spring puts out approximately 385 FPS +/- 10% on a 0.2g BB but if you need more, this is easily done thanks to the SVD's compatibility with standard AEG main springs. The HOP-up unit is of the much-lauded TDC design, adjusting via a grub screw with direct pressure applied to the HOP-up rubber for less side-to-side deviation and a stronger overall HOP-up effect. As an affordable way to dip your toes into the world of Airsoft sniping or as the base gun for a beast of a build, the AGM Dragunov SVD is a great choice!

If sniping is your skirmish role and you want something that isn't an L96 or VSR platform as your primary, the AGM Dragunov SVD will give you the unique rifle you need! This Dragunov SVD replica is a single-shot straight pull bolt action, meaning it falls within the same rules as a standard sniper rifle but with the uniquely iconic look of the bad guy sniper rifle. With full metal on the outside and your choice of high-density polymer or stunning real wood furniture, from a looks standpoint, this SVD ticks all the boxes!

On the inside, we are treated to a 6.02mm tightbore inner barrel measuring a whopping 600mm in overall length, meaning superb accuracy and range potential, if you do your part. The main spring puts out approximately 385 FPS +/- 10% on a 0.2g BB but if you need more, this is easily done thanks to the SVD's compatibility with standard AEG main springs. The HOP-up unit is of the much-lauded TDC design, adjusting via a grub screw with direct pressure applied to the HOP-up rubber for less side-to-side deviation and a stronger overall HOP-up effect. As an affordable way to dip your toes into the world of Airsoft sniping or as the base gun for a beast of a build, the AGM Dragunov SVD is a great choice!

If you're looking for a modernised full metal M4A1, the DA-A02-ETU ALPHA™ M4A1 RAS AEG from Delta Armory is exactly that. This ALPHA™ line AEG boasts Delta Armory's best internals yet, featuring reinforced internal parts from SHS, CNC aluminium cylinder group parts, CNC machined 16:1 steel gears and a high torque motor, backed up by the Delta Armory programmable MOSFET/ETU system. The Delta ETU offers the option for burst mode, binary trigger and pre-cocking, all of which can be programmed in using the fire controls of the AEG itself.

On the outside Delta has added a gunfighter mod.3 style pistol grip, a slimline crane-style stock and an enhanced receiver, complete with gripping texture on the magazine well and a built-in enlarged trigger guard. This gives the now old-school M4A1 a bit of a refresh without ruining its iconic outline and maintaining suitability for both casual and Milsim skirmishes. If you love the M4A1 silhouette but want more modern ergonomics, the Delta Armory DA-A02-ETU ALPHA™ M4A1 RAS AEG is ideal!

If you like your sidearms to stand out, the VORSK EU18 Solid Slide GBB Pistol; Metallic Edition sure does! This is the proven VORSK EU18 Solid slide we have all seen before but treated to a gorgeous metallic finish on its slide and trim parts, setting it apart from the usual boring black EU series pistols and allowing those without UKARA to get it right away!

Like the other VORSK EU series offerings, the EU18 Solid Slide Metallic Edition boasts full metal construction, a 6.03mm tightbore inner barrel and a full compliment of upgraded externals, including a pre-installed thread adapter, flared magazine well and an enhanced frame with comfortable faux-stippling texture. Available in a range of metallic colour options including red, purple and V-blue; if a sidearm with a side of style is on the menu, the VORSK EU18 Solid Slide Metallic Edition should suit your tastes!

If you like your sidearms to stand out, the VORSK EU18 Solid Slide GBB Pistol; Metallic Edition sure does! This is the proven VORSK EU18 Solid slide we have all seen before but treated to a gorgeous metallic finish on its slide and trim parts, setting it apart from the usual boring black EU series pistols and allowing those without UKARA to get it right away!

Like the other VORSK EU series offerings, the EU18 Solid Slide Metallic Edition boasts full metal construction, a 6.03mm tightbore inner barrel and a full compliment of upgraded externals, including a pre-installed thread adapter, flared magazine well and an enhanced frame with comfortable faux-stippling texture. Available in a range of metallic colour options including red, purple and V-blue; if a sidearm with a side of style is on the menu, the VORSK EU18 Solid Slide Metallic Edition should suit your tastes!

The Double Eagle M904H is a lightweight but extremely effective Airsoft Electric Gun, powered by a Battery in the Stock. It is based around the 'Falcon Fire Control System' which offers a highly programmable and incredibly well-responding Trigger. If you're a fan of staying light on your feet, flanking the enemy and generally causing mayhem, this Airsoft Gun will do you proud on the skirmish field.

If you're looking for a spring-powered Kar98k that truly stands taller than the rest, you have found it in the S&T Kar98K. The finish on this has to be seen to be believed! It features an authentic-looking and feeling real wood stock and upper handguard, together with well-finished metal components. The metal finish is particularly noteworthy, as it doesn't give off the vibe that this is a replica rifle manufactured in the last few months, unlike so many other historical Airsoft rifle replicas. 

A perfect starter pistol for those starting their Airsoft journey, or a budget friendly sidearm for those times your primary is empty and you find yourself in a pinch!

This electric Airsoft 6mm BB gun, is designed to be easy to use, and even features a MOSFET and adjustable gear Hop-up.

The CM.125S pistol is constructed with an alloy mock slide and polymer frame; Lightweight and efficient at both semi and full auto, this pistol has everything you need to get you into Airsoft skirmishing.

A perfect starter pistol for those starting their Airsoft journey, or a budget friendly sidearm for those times your primary is empty and you find yourself in a pinch!

This electric Airsoft 6mm BB gun, is designed to be easy to use, and even features a MOSFET and adjustable gear Hop-up.

The CM.125S pistol is constructed with an alloy mock slide and polymer frame; Lightweight and efficient at both semi and full auto, this pistol has everything you need to get you into Airsoft skirmishing.

If you like compact sidearms with an elite look, the VORSK Hi-Capa Vengeance Compact w/Red Dot Sight is one to watch. This full metal Hi-Capa platform marries the 3.8-inch barrel length of the most compact Hi-Capa pistols with the full-sized 5.1 frame, giving you the design philosophy of the Glock 19X in Hi-Capa form.

Like other Hi-Capas in the VORSK CS range, the Hi-Capa Vengeance Compact boasts full metal construction, a 6.03mm tightbore inner barrel to enhance accuracy and a threaded outer barrel with a 14mm thread adapter so you can mount a tracer right away. This, the "BDS" version is also equipped with a red dot sight, pre-installed on a fixed position mount for fast target acquisition and even faster follow-up shots when compared to pistols equipped with a slide-mounted red dot sight.

If owning a customised Hi-Capa is on your list, the VORSK Hi-Capa Vengeance Compact w/Red Dot Sight has done all the work for you! With the high-end aesthetic on the outside and a 6.03mm tightbore barrel on the inside, the Vengeance Compact with red dot sight is ready to rock either as a sidearm or a CQB primary!

A Gas Powered, Alloy Constructed Shotgun which will fire three or six BBs with each pump, loaded with Green Gas via the Inlet Valve on the Pistol Grip. It comes included with three Shotgun Shells and is the closest you can get to a Marui Gas Shotgun without spending £279+.

The CYMA CM.051 is a replica of the classic 'Chicago Typewriter' Thompson Submachine Gun, AKA the "Tommy Gun". The CM.051 comes complete with all the correct furniture, in a beautiful and well-toned Faux Wood finish. 

This version of the Thompson has a few key differences from the M1A1 Military variant, mainly cooling fins on the barrel and the integrated Foregrip with/ finger grooves. Complete with a 550rnd Drum Magazine, this is the perfect Airsoft Electric Gun for someone who wants to stand out from the crowd, is interested in a historical or roleplay loadout, or just wants to suppress the enemy to bits using something that isn't an M4, the CYMA CM.051 is perfect for you.

If you want to keep your setup realistic but need more ammo on tap, the S&T PPSh-41 EBB Submachine Gun AEG; ABS Stock is definitely worth a look. This full metal PPSh-41 SMG replica is packaged with a 2000 round drum magazine which matches that of the real PPSh perfectly, giving you an authentic platform with an almost unlimited ammo capacity! Like the Real Wood version, the vast majority of the metal parts in the build are steel, giving you authentic handling and realistic stamped markings.

To provide a more immersive firing experience, the S&T PPSh-41 is equipped with an Electro-Mechanical blowback mechanism which cycles the mock bolt each time you fire with an exciting "clack clack clack". We would be lying to you if we said this was proper recoil, but the slight jolt and mechanical noise as you fire makes this retro SMG a real blast to shoot, way more interesting than a standard AEG.

As with the Real Wood model, we have a unique gearbox shell inside equipped with 18:1 ratio steel gears running on 8mm steel slide-bearing bushings and the rotary HOP-up unit is paired with a 6.03mm tightbore inner barrel to give you the edge in accuracy. If you want to run a lesser seen platform with plenty of realism and the inherent firepower of a 2000 round drum mag at your disposal, the S&T PPSh-41 EBB Submachine Gun AEG; ABS Stock is a fantastic option!

If you've been weighing up your options in search of an M4/AR-15 PDW to take on those tight corners in CQB, your decision just got harder! The Double Eagle M923A DEK762 AEG is packing the same awesome FALCON EFCS MOSFET as the previous D.E UTR series releases in a uniquely designed AR PDW body with an M-LOK handguard, sound amplifying muzzle device and compact PDW stock which doesn't compromise when it comes to battery space.

With Double Eagle's usual compliment of pre-upgraded internals including a 6.04mm tightbore inner barrel, 8mm ball-bearing bushings, a quick change spring system, a rotary adjustable HOP-up unit and 11.1V LiPo compatibility, the DEK762 absolutely meets the mark when it comes to performance and is ready for any M-LOK or 20mm accessories you can throw at it. Whether you are seeking a new CQB primary or you need a backup to your sniper rifle with a bit more firepower, the DEK762 would be a serious asset in game!