All Airsoft Guns

Specna Arms are at it again with an Airsoft replica of the AR36, a lightweight rifle featuring electric blowback no less, giving you a satisfying recoil with every shot and giving you that added realism.

The SA-G12 comes ready to rock straight out of the box, boasting 3 front handguard 20mm rails and a raised top rail for tactical accessories as well as a side folding stock for CQB use and fully ambidextrous controls. A rough and ready AEG for both new and veteran players alike!

This compact platform is exactly what you need for your close-quarters battles. It is short and lightweight, making it a great asset for those who like to stay nimble during their skirmishes. The Specna Arms SA-C21 CORE™ HAL¹ ETU™ M4/AR-15 AEG has an entry-level price point, with veteran-level potential!

This SA-C21 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring.

If you're in search of a close-quarters-optimised M4/AR-15 AEG on a budget, you've found one of the best options with the DA-C14-EGL CHARLIE™ 7" M-LOK M4/AR-15 AEG from Delta Armory! A lightning-fast density polymer build with an alloy outer barrel and steel sling plate, the DA-C14-EGL is also rocking the EAGLE™ programmable MOSFET inside, giving it advanced functionality way beyond its price point!

Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking, giving you an incredibly advanced M4 AEG for an entry-level price. Also inside is a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, giving the DA-C14-EGL far more long-range effect on target than one might expect for such a compact primary!

If you like to move fast and need a platform to match or you're a CQB specialist needing to cut tight corners, you're in great hands with the Delta Armory DA-C14-EGL CHARLIE™ 7" M-LOK M4/AR-15 AEG at your side. Packed with pre-upgraded parts and based on Tokyo Marui's proven internal design, the DA-C14-EGL is affordable, reliable and ready when you are!

Do you want a modern-looking rifle with a modern, advanced MOSFET which is also budget-friendly? If so, then you have come to the right place! The Delta Armory DA-C10-EGL CHARLIE™ 8" M-LOK SilentOps M4/AR-15 AEG is exactly that, boasting a similar style to the KS-1 military rifle, just shorter and with a compact suppressor on the front, making it perfect for CQB environments.

The DA-C10-EGL is similarly equipped internally to the original CHARLIE™ series, except the EAGLE™ ETU adds a whole new level of functionality. Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking. This is some seriously high-tech stuff for such a budget-friendly platform!

Do you want a modern-looking rifle with a modern, advanced MOSFET which is also budget-friendly? If so, then you have come to the right place! The Delta Armory DA-C10-EGL CHARLIE™ 8" M-LOK SilentOps M4/AR-15 AEG is exactly that, boasting a similar style to the KS-1 military rifle, just shorter and with a compact suppressor on the front, making it perfect for CQB environments.

The DA-C10-EGL is similarly equipped internally to the original CHARLIE™ series, except the EAGLE™ ETU adds a whole new level of functionality. Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking. This is some seriously high-tech stuff for such a budget-friendly platform!

Based on the iconic Steyr AUG carbine, this compact 6mm BB Airsoft gun is a lightweight and compact electrically powered replica AUG. Realistically constructed from polymer with an alloy front end, the AUG is supplied with an aluminium foregrip.

Looking for something a bit different? This certainly is. The S&T ST870 shotgun is full metal with real wood furniture and it shoots nice and hot, it would make an incredible competition shotgun, with excellent accuracy despite the lack of any form of sights! If you're good enough, your primary becomes an extension of your body, and sights become merely a hindrance...

What's better than a Gas Blowback 1911 with Custom External Furniture that is compatible with RAVEN MEU Mags (meaning it can take Green Gas or CO2 Magazines depending on the weather), and is already painted and ready for you to order today...?

TWO Gas Blowback 1911s with Custom External Furniture that are compatible with RAVEN MEU Mags (meaning they can take Green Gas or CO2 Magazines depending on the weather), and are already painted and ready for you to order today!

This double pack of Pistols comes included with 2 x Gas Magazines (as you would expect), but also 2 x Extended Gas Magazines, giving you a total of four Mags out of the box! No defence/membership? No problem! These Pistols do not require one to order as they are already painted.

A Gas Blowback Semi-auto / Fully Auto Airsoft pistol, based on the Samuri Edge pistol used by the Resident Evil Game Series Character 'Barry Burton'.

The Italian brand Evolution Airsoft has made a name for itself by providing pre-upgraded AEGs with superb quality externals, giving Airsofters what we always wanted; a gun we don't have to mess with! Though some live for the "thrill" of installing upgrades and hoping they work, for the rest of us, Evolution Airsoft has come through once again! The Smart Airsoft Gun series features the same impressive internals and rock solid externals as previous Carbontech AEGs, but with the new and improved ETS II installed.

If you're after an affordable battle-ready AR setup with a programmable trigger, this bundle is for you! The DA-C04-EGL Totally Tantastic Platform Package combines the DA-C04-EGL from Delta Armory with a TO552 holographic-style red dot sight, a PEQ-15 laser/flashlight combo, an Element Stubby Vertical Foregrip and 2 extra 150rnd Mid-cap magazines.

Please note, this set doesn't include a battery and charger. If you need these, we recommend a 7.4V 1100mAh LiPo in crane/nunchuck config and a LiPo balance charger.

An Airsoft 6mm BB AEG Light Machine Gun, designed for a Support Role, and is based on the Russian Built RPK-74. The weapon features a real wood Stock and Handguard, with a full Alloy Body and Internals, with a Polymer Pistol Grip and Imitation Bakelite Magazine.

If you play to win, you will need this to keep up! The Well WE23-S Rotary Minigun AEG is a unique design from Well, part of its "PRO" line of high end AEGs. This Airsoft Minigun is constructed primarily from high density polymer to keep the weight manageable, with 5 aluminium outer barrels braced with an aluminium ring at the tip. The Minigun feeds from 1200rnd spring-assisted high-capacity magazines which are wound by the internal motor of the Minigun itself, meaning you can spray and pray without worrying about winding every 3 seconds!

On the inside, Well has equipped this Minigun with the parts it needs to truly dominate the battlefield. The 5 inner barrels are all 6.03mm tightbores, granting a small increase in FPS and improved accuracy potential. The 5 HOP-up units are all independently adjustable, making use of a TDC design with grub screws to apply adjustments. The bearings are 8mm, meaning smooth running and low friction, and the Minigun is also compatible with standard AEG HOP-up buckings and inner barrels, just in case its performance isn't already enough for you!

The Well Minigun has the very real potential to change the game, with an incredible 36 rounds per second on an 11.1V LiPo battery and a monstrous 1200rnd magazine that winds itself. Miniguns have been around before, but this one is smaller, lighter and far more affordable than its rivals. If you have wanted a taste of the Minigun life but held off for one reason or another, with the Well Minigun in your hands you will be happy you waited!

If you're getting bored of the usual M4-shaped AEGs, who can blame you? The Cybergun FN Herstal MK16 SCAR-L 14.5-Inch AEG makes a nice change, boasting full metal construction and licenced trademarks from FN Herstal. Like the real thing, this detailed SCAR replica features ambidextrous fire controls, a monolithic upper receiver made from a single block of aluminium and an advanced multi-adjustable stock offering length of pull adjustment, an adjustable cheek riser and side folding functionality. Make no mistake, this is one of the best SCAR replicas out there when it comes to external quality!

Internally, the SCAR-L is based around VFC's version 2 gearbox, a modified design to allow for ambidextrous selector levers. Inside, we have 18:1 ratio steel gears running on 8mm ball-bearing bushings, reducing friction when compared to solid bushings for a smoother gearbox report when fired. The inner barrel is also a 6.04mm tightbore example, giving the FPS a slight boost thanks to improved air efficiency and improving accuracy potential with high-quality ammo. If you're dreaming of a beast of a SCAR build and want the best externals around, start with the Cybergun FN Herstal MK16 SCAR-L 14.5-Inch AEG!

This Airsoft gun is a replica of the famous L85 / SA80 used by the British Armed Forces as their standard issue rifle. This Airsoft replica is G&G's offering into the L85 replica range, and features their new ETU and MOSFET systems allowing the use of 11.1v LiPo for a reliable rate of fire and easy trigger pull, and to top it all off: electric blowback.

Designed as a replica of the infamous AA-12 fully automatic shotgun, this high quality AEG Airsoft shotgun has a trick up its sleeve – or barrel, as it has three simultaneously firing individual barrels, each with adjustable Hop-up units.

If you're into retro loadouts and need the most authentic Mk 18 MOD 0 build around, you've just found it! The CYMA CGS Colt Mk 18 MOD 0 10.5" GBBR boasts official licencing from Colt via Cybergun and is a flawless replica of the original Mk 18, even down to the correct M16A1 lower receiver and 10.3-inch barrel setup.

Inside, the Mk 18 MOD 0 is significantly upgraded, packing a steel bolt carrier, steel trigger group parts, steel bolt catch and adjustable hammer; allowing you to tune power to get right within site limits. Also inside is a 6.03mm tightbore inner barrel, giving you an accuracy edge when compared to standard 6.08mm bores. Being based on the TM ZET system internal design, this thing will shoot like a beast, with even heavier recoil than the original TM!

Following in the footsteps of the Krytac Kriss Vector Alpine Edition we are proud to introduce the Krytac EMG P90; Alpine Special Edition. This unique P90 variant has an eye-catching new look and brings plenty of modern functionality to the table as a bonus thanks to its redesigned modular upper receiver/optics bridge assembly. As with the original Krytac P90, this variant boasts full licencing from FN Herstal via Cybergun, but unlike the original, this P90 takes a walk on the wild side when it comes to external design!

Inside we are treated to the best the P90 platform has to offer, just like the previous P90 from Krytac. The trigger has been enhanced and now has a super short trigger travel with full adjustability, the upgraded internals are kept in check by the Krytac Nautilus MOSFET and a 30K RPM high torque motor delivers the power needed to provide a super snappy trigger response and a remarkable rate of fire. If you like your P90s minty fresh on the outside and a cold killer on the inside, this one should suit you!

If you want to ensure victory, you need this. The WELL PRO WE23-Plus Rotary Minigun is part of its "PRO" line of high-end AEGs. This Airsoft Minigun is constructed primarily from high-density polymer to keep the weight manageable, with 5 aluminium outer barrels braced with an aluminium ring at the tip. The Minigun feeds from 2800rnd spring-assisted high-capacity magazines which are wound by the internal motor of the Minigun itself, meaning you can spray and pray without worrying about winding every 3 seconds!

On the inside, Well has equipped this Minigun with the parts it needs to truly dominate the battlefield. The 5 inner barrels are all 6.03mm tight bores, granting a small increase in FPS and improved accuracy potential. The 5 HOP-up units are all independently adjustable, making use of a rotary design for each barrel to apply adjustments. The bearings are 8mm, meaning smooth running and low friction, and the Minigun is also compatible with standard AEG HOP-up buckings and inner barrels, just in case its performance isn't already enough for you!

The Well Minigun has the very real potential to change the game, with an incredible fire rate on an 11.1V LiPo battery and a monstrous 2800rnd magazine that winds itself. Miniguns have been around before, but this one is smaller, lighter and far more affordable than its rivals. If you have wanted a taste of the Minigun life but held off for one reason or another, with the Well Minigun in your hands you will be happy you waited!

If you are keeping your eye out for an M4 platform AEG which combines low weight with a long barrel for superb outdoors performance you can put it back in again, you have found a great option! The CM.612 from CYMA sports the usual rock solid internals from the CM.6xx M4 series but with a 16 inch outer barrel and the gorgeous KAC style URX-2 quad rail system to give it a dynamic and high speed look. The CM.612 would be an asset in an outdoors skirmish thanks to its long 6.03mm tightbore inner barrel, offering accuracy and range which is unattainable for shorter setups. If you do the majority of your Airsoft *beep* whipping in the woods, this AEG would suit you well.

An AR platform replica which is built from very tough High-Density Nylon Fibre Polymer, and features a MOSFET, Quick Change Spring and Microswitch Trigger, making this the absolute perfect Starter Gun.

Looking to challenge your CQB skills? Or maybe you need a compact counter-sniper rifle to carry along with your other gear? Action Army provides with the T11 Shorty. Based on the fabled Marui VSR-10, this rifle has no shortage of upgrade potential, and set up in this unique configuration presents some interesting niche opportunities for the skirmisher in the field.

Are you looking for a reliable M4 to help you in your skirmishes, or maybe you're a veteran looking for an affordable AEG to pimp out with your own upgrades, if so, the Specna Arms SA-C25 CORE™ HAL¹ ETU™ M4/AR-15 AEG is exactly what you're searching for! It's more compact than the original SA-C25 with its PDW stock, perfect for staying versatile on the battlefield.

This SA-C25 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for a beginner-level price point!

If you're after a beginner-friendly M4/AR-15 AEG with a cutting-edge aesthetic, the Delta Armory DA-C08 CHARLIE™ 8" M-LOK M4/AR-15 AEG is one to watch. Made from high density polymer with an alloy outer barrel, this build is super light and agile, fantastic for younger players with limited physical strength, though the lightweight build does not necessarily mean compromise!

On the outside, the DA-C08 is rocking an M-LOK handguard with 20mm rail sections pre-installed and a 20mm Picatinny railed receiver, ready for a red dot sight, scope or any other accessory you choose to mount. The outer barrel is threaded to 14mm CCW, meaning common suppressors and tracer units will mount with minimal fuss. Internally, things are equally impressive!

The DA-C08 is based around the common V2 gearbox with an alloy shell, 18:1 ratio steel gears running on 8mm bushings and a reinforced SHS tappet plate and piston with a full steel tooth rack. The inner barrel is a 6.03mm tightbore paired with a rotary HOP-up, giving you the kit you need to get good effect on targets downrange. With a compact CQB-friendly form, pre-upgraded internals and full aftermarket compatibility, the DA-C08 CHARLIE™ from Delta Armory is a fantastic starter AEG or base for a custom build!

If you're new to Airsoft and want to start with something a bit more advanced than the average M4, the Delta Armory DA-C02-ETU CHARLIE™ M4/AR-15 CQBR AEG should suit your needs! This M4 CQBR AEG is constructed primarily from high-density polymer, just like the original DA-C02, but unlike the original, this version is rocking the ALPHA™ ETU series internals, flawlessly marrying a lightweight and agile build with a lightening fast trigger response and the ability to program the trigger for binary trigger or burst mode.

The ETU isn't the only thing added to the DA-C02-ETU; we are also treated to 16:1 ratio CNC steel gears, CNC aluminium cylinder group parts, a 6.03mm tightbore inner barrel with a high torque Neodymium magnet motor to top it off. The result is a surprising trigger response and intense rate of fire, usually reserved for AEGs twice this price! If you want all of the performance but none of the weight of the Delta Armory ALPHA ETU series, the DA-C02-ETU CHARLIE™ M4/AR-15 CQBR AEG provides exactly that!

If you are ready to up your Airsoft game, adding a grenade launcher to your arsenal is a sure way to have the enemy on the run! The US Grenadier M320 Bundle was put together to give milsim inclined Airsofters a ready-to-go 40mm grenade launcher set which can either be weapon mounted or used as a stand-alone launcher.

The package includes the S&T M320A1 40mm Grenade Launcher and 2 x NUPROL 40mm MOSCART Gas Grenades, leaving only the BBs to buy. Whether you are busting bunkers or dominating the corridors of your local CQB site, a 40mm launcher will be a true asset to your loadout!

If you held off on the original WE06 PPK-20 because of its lack of steel, the WELL PRO WE06 PPK-20 Compact SMG AEG w/ Eshooter MOSFET; Full Metal is the one to go for! Based on the most recent prototype of the PPK-20 SMG, an AK-derived SMG design, the WE06 boasts both M-LOK and 20mm Picatinny accessory attachment interfaces, ambidextrous fire controls and a side folding retractable stock based on that of the AM-17, another advanced Kalashnikov Concern prototype.

This, being the "full metal" version is also rocking a steel flash hider and a steel trunnion block along with a stamped steel receiver and top cover, giving it the appropriate hefty feel for the authentic replica experience. Inside, we have a unique version 3 gearbox-derived shell with a quick change spring system, a steel 18:1 ratio gearset running on 8mm slide bearings, a type 2 cylinder, a polymer piston with a full rack of steel teeth and an EShooter programmable MOSFET to top it off. The EShooter 'FET provides electrical efficiency improvements, battery protection and cycle completion along with programmable fire modes and adjustable pre-cocking. If you love the styling of the WE06 PPK-20 Compact SMG but have been waiting for the full metal version, here you go!

If you like the looks and ambidextrous functionality of the ARCTURUS E3 Rifle but you prefer a shorter package, the E3 Carbine is the same thing but with a 10.5-inch outer barrel, making it ideal for close-quarters use, and those who like to play aggressively and close ground with the enemy! Like the E3 Rifle, the E3 Carbine boasts full metal construction, well thought out pre-upgraded ARCTURUS internals, an intimidating looking compensator and M-LOK/Picatinny hybrid handguard up front.

The impressive internal spec includes a 6.03mm steel tightbore inner barrel, rotary HOP-up unit, microswitch trigger and a thoughtfully built gearbox with low friction components. The E3 Carbine is perfect for any aggressive player who wants all the options when it comes to accessories, and will make use of the wealth of QD sling points across this modern M4/AR-15 platform!

Authentic and gorgeous, this is the first thought you should have when looking at this real wood A&K Dragunov SVD Sniper Rifle. A replica of the renowned Russian marksman rifle, this AEG looks seriously badass! This version has gorgeous real wood furniture which is a fantastic match for the plywood which adorned the original SVD when it was first produced for the Russian military in 1963. This Dragunov boasts full metal construction with some steel parts as well, giving it a reasonably realistic weight without making it a pain to carry around all day!

It features a custom gearbox and a 6.03mm diameter barrel. This, paired with the Dragunov's neodymium motor and 590mm inner barrel, means it can pack quite a punch and a superior range. The A&K Dragunov would be an excellent platform for a DMR or sniper rifle loadout, just like its real-world utilisation. If you are looking for a long-range platform that has an authentic and iconic look, with real wood and steel, then the A&K Dragunov SVD Sniper Rifle should be in your sights!

If CQB is your poison, or you have limited space in your kit bag, you are going to love this one! The CM.106 AR-9 PDW from CYMA adds to the increasingly wide range of AR-9 platforms available, making the decision on which platform to go for that much harder! The CM.106 PDW sports full metal construction, a pre-installed electronic trigger unit with MOSFET, a high-speed motor, and internals which have been upgraded even beyond the already impressive "Platinum" internal setup.