Airsoft Under £75

A multipack of magazine for the ASG Scorpion Evo. Built from tough Polymer these magazines are mid-capacity, meaning BBs can be loaded from the top using a speed loader and then require no winding. 

Army Armament have taken Airsoft 1911's to the next level, with a sweet array of advanced features.

The extended magazine and light enhancing ironsights as well as the textured grip and beavertail safety come together for a true operator's sidearm. With satisfying trigger response and recoil this 1911 is a modern twist on an iconic pistol.

Army Armament have taken Airsoft 1911's to the next level, with a sweet array of advanced features.

The extended magazine and light enhancing ironsights as well as the textured grip and beavertail safety come together for a true operator's sidearm. With satisfying trigger response and recoil this 1911 is a modern twist on an iconic pistol.

If you're looking for a plate carrier with more coverage than modern low-profile options, the 8Fields Tactical Goliath XL MOLLE Plate Carrier Vest should be right up your street. Constructed from 1000D Nylon with MOLLE loops across the front, rear and sides, this carrier is similar to body armour vests like the RAV and CIRAS, providing far more coverage at the sides and front, extending almost down to the belt line. We often hear requests for carriers with more coverage than JPC and similar vests; finally, this void is filled!

The Goliath XL is fully adjustable, with plenty of adjustment in the shoulders for taller users and cummerbund adjustment at both the front and rear via velcro, allowing for most body types. If you're working on a heavy "juggernaut" style loadout or you need more protection during intense CQB skirmishes, the 8Fields Tactical Goliath XL MOLLE Plate Carrier Vest is what you need!

If you're looking for a plate carrier with more coverage than modern low-profile options, the 8Fields Tactical Goliath XL MOLLE Plate Carrier Vest should be right up your street. Constructed from 1000D Nylon with MOLLE loops across the front, rear and sides, this carrier is similar to body armour vests like the RAV and CIRAS, providing far more coverage at the sides and front, extending almost down to the belt line. We often hear requests for carriers with more coverage than JPC and similar vests; finally, this void is filled!

The Goliath XL is fully adjustable, with plenty of adjustment in the shoulders for taller users and cummerbund adjustment at both the front and rear via velcro, allowing for most body types. If you're working on a heavy "juggernaut" style loadout or you need more protection during intense CQB skirmishes, the 8Fields Tactical Goliath XL MOLLE Plate Carrier Vest is what you need!

If you're looking for a plate carrier with more coverage than modern low-profile options, the 8Fields Tactical Goliath XL MOLLE Plate Carrier Vest should be right up your street. Constructed from 1000D Nylon with MOLLE loops across the front, rear and sides, this carrier is similar to body armour vests like the RAV and CIRAS, providing far more coverage at the sides and front, extending almost down to the belt line. We often hear requests for carriers with more coverage than JPC and similar vests; finally, this void is filled!

The Goliath XL is fully adjustable, with plenty of adjustment in the shoulders for taller users and cummerbund adjustment at both the front and rear via velcro, allowing for most body types. If you're working on a heavy "juggernaut" style loadout or you need more protection during intense CQB skirmishes, the 8Fields Tactical Goliath XL MOLLE Plate Carrier Vest is what you need!

If you're getting gassed up for the GBBR season and you're running a CGS or TM ZET system GBBR, fill your rig with these! The CYMA 30rnd Green Gas Magazine for M4/AR-15 CGS & ZET GBBR is compatible with both CYMA CGS and Tokyo Marui ZET system M4/AR-15 GBBRs and is a green gas magazine with the fill valve on the rear of the steel STANAG style body.

The mag can be loaded through the feed lips at the top of the magazine, though this can be challenging with a standard speed loader without a GBBR adapter. As with the original TM and CYMA GBBR magazines, these mags include the bolt stop components which lock the bolt open at the end of a mag, and each mag holds 30 BBs. 

If you are looking for the Special Forces tactical flashlight of choice, you have found it! Or a near-perfect replica of it, that is! The NUPROL NX600 Scout Tactical Flashlight is a close replica of the real world SF Scout light, the tactical flashlight of choice for special forces around the world. The NX600 is designed to be mounted to 20mm Picatinny rails with its integral mount and can be set up with either the push-button tail cap or a pressure switch, both of which are included in the package. Whether you have a need to distract the enemy as you clear rooms, see where you are going in the darkest of dark CQB sites or you just want your primary to really look the part, a scout style flashlight like the NX600 would be an excellent choice! 

If you are looking for the Special Forces tactical flashlight of choice, you have found it! Or a near-perfect replica of it, that is! The NUPROL NX600 Scout Tactical Flashlight is a close replica of the real world SF Scout light, the tactical flashlight of choice for special forces around the world. The NX600 is designed to be mounted to 20mm Picatinny rails with its integral mount and can be set up with either the push-button tail cap or a pressure switch, both of which are included in the package. Whether you have a need to distract the enemy as you clear rooms, see where you are going in the darkest of dark CQB sites or you just want your primary to really look the part, a scout style flashlight like the NX600 would be an excellent choice! 

If you have a small gun but a big need for illumination, or if you want the latest compact, high speed PEQ style laser unit, the DBAL-A2 from WADSN may be what you have been looking for! With more functions than the space shuttle and a compact lightweight form, you need your excuses ready to not want this on your primary!

The HG-138 is a Rail Mounted BB Launcher designed to be attached to the underside of Pistols and Rifles as a single shot 40 round launcher which can be used to clear a group of enemy or as a last hurrah before you get hit.

If you feel lucky and want to try your hand with an Airsoft revolver, the HFC HG-133B Savaging Bull Gas NBB Revolver will give you what you need. Functioning just like the real thing, with a rotating cylinder, realistic mock shells and a double action/single action trigger, the Savaging Bull is ideal for those who want to experience revolver life without getting in too deep.

This is the standard black version of the Savaging Bull, offering a more discrete and professional wheel gun than the blingtastic Silver version. Despite its more subtle colouration, this Savaging Bull is just as menacing with its modern angled barrel shroud complete with stylish ports. 

Constructed from ABS polymer with choice alloy and steel parts, the Savaging Bull is light and portable despite its relatively long 5-inch barrel. This means it is easy to carry along with your usual sidearm as a last-ditch backup platform, giving you 6 extra chances to get kills when your mags run dry. This may not be the most powerful handgun in the world, but it looks the part and is probably the most affordable way to get the realistic revolver experience!

For those of you who prefer the old ways, this iconic beast of a revolver features a fully revolving revolving drum holding six shells. With a  4 inch barrel it is compact but still with a sturdy feel thanks to it's full metal alloy construction and is powered by green gas.

A helmet of exceptional quality from FMA, with memory foam inserts, rotary adjustment dial, shaped chin strap, velcro patches, side rails, NVG mounts, several ventilation holes and easy, full adjustment of sizing.

A helmet of exceptional quality from FMA, with memory foam inserts, rotary adjustment dial, shaped chin strap, velcro patches, side rails, NVG mounts, several ventilation holes and easy, full adjustment of sizing.

A helmet of exceptional quality from FMA, with memory foam inserts, rotary adjustment dial, shaped chin strap, velcro patches, side rails, NVG mounts, several ventilation holes and easy, full adjustment of sizing.

If you are looking for one of the spiciest pistol flashlights we sell, the XH35 from WADSN is up there with its phenomenal 890 lumens output on high power mode! The XH35 is an enhanced pistol flashlight based on the X300 design but with the ability to switch between low and high output mode, and the solid or stroboscopic modes. The XH35 uses the same rocker switch controls as previous X200/300/400 series lights, so there is no need to retrain if you fancy an upgrade!

A Lightweight JPC Style Plate Carrier, designed to be lightweight and low profile, whilst still providing protection and enough MOLLE for setting up a practical rig. 

A Lightweight JPC Style Plate Carrier, designed to be lightweight and low profile, whilst still providing protection and enough MOLLE for setting up a practical rig. 

A Lightweight JPC Style Plate Carrier, designed to be lightweight and low profile, whilst still providing protection and enough MOLLE for setting up a practical rig. 

A Lightweight JPC Style Plate Carrier, designed to be lightweight and low profile, whilst still providing protection and enough MOLLE for setting up a practical rig. 

If you are looking for mags for your Double Eagle EMG Noveske N4 MWS you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR and unfortunately don't fit the Tokyo Marui M4A1 MWS ZET System GBBR. Thought we would get the bad news over with early!

The mag is constructed with a high-density polymer shell and alloy internals and can be loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is on the rear of the magazine, just below the knocker valve, and the mag is compatible with both green gas and red gas.

The design of the externals is down to Double Eagle themselves, who have added an over-insertion stop at the front of the magazine to prevent the feed lips from being damaged after a reload under pressure. On each side of the body, there is also anti-slip dot texture to prevent the magazine from being dropped and the front of the mag also features finger grooves so it can be used as a makeshift grip when shooting from unconventional positions.

If you are looking for mags for your Double Eagle EMG Noveske N4 MWS you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR and unfortunately don't fit the Tokyo Marui M4A1 MWS ZET System GBBR. Thought we would get the bad news over with early!

The mag is constructed with a high-density polymer shell and alloy internals and can be loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is on the rear of the magazine, just below the knocker valve, and the mag is compatible with both green gas and red gas.

The design of the externals is down to Double Eagle themselves, who have added an over-insertion stop at the front of the magazine to prevent the feed lips from being damaged after a reload under pressure. On each side of the body, there is also anti-slip dot texture to prevent the magazine from being dropped and the front of the mag also features finger grooves so it can be used as a makeshift grip when shooting from unconventional positions.

Wanting to get into Airsoft skirmishing in style? Or maybe you're looking for an iconic sidearm to complete your loadout.

The CM.121 has got all bases covered, with it's lightweight polymer construction and choice of semi or full auto, this electric Desert Eagle lets you rock up to a skirmish with a replica of the classic hand cannon.

Never before has such an incredible Scope been available at such an affordable price! This Riflescope has a tremendous zoom, reaching out from 2.5x to 10x Magnification, has an Illuminated Reticule with the choice of Red/Green/Blue, comes included with Scope Mount Rings, has adjustable Focus as well as a Parallax Control. This is without a doubt the greatest value for money Airsoft Scope that money can buy right now! Whether you're new to Sniping or just want to treat yourself to something a little nicer... quality doesn't have to cost.

If you are looking for magazines for your Double Eagle or Tokyo Marui MWS GBBR; you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR, but should work with original Tokyo Marui M4 MWS System GBBRs too - unlike other Double Eagle gas magazines.

The mag is constructed with a durable alloy shell and internals. It is loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is at the bottom of the magazine, on the baseplate, and the mag is compatible with both green gas and red gas.

It holds 35 BBs, making it perfect for those who seek realism. As with the original TM and Double Eagle GBBR magazines, these mags include the bolt stop components which lock the bolt open at the end of a mag, further adding to the realism of the Double Eagle Noveske N4 MWS ZET System GBBR!

If you feel lucky and want to try your hand with an Airsoft revolver, the HFC HG-133C Savaging Bull Gas NBB Revolver is a fine choice. Functioning just like the real thing, with a rotating cylinder, realistic mock shells and a double action/single action trigger, the Savaging Bull is ideal for those who want to experience revolver life without getting in too deep.

Constructed from ABS polymer with choice alloy and steel parts, the Savaging Bull is light and portable despite its relatively long 5-inch barrel. This means it is easy to carry along with your usual sidearm as a last-ditch backup platform, giving you 6 extra chances to get kills when your mags run dry. This may not be the most powerful handgun in the world, but it looks the part and is probably the most affordable way to get the realistic revolver experience!

A tough Alloy constructed Red Dot Sight which is reminiscent of the T1 style design, and comes included with both a high and low profile 20mm mount to use it raised or snugly seated on your rail. It accepts a CR2032 battery and has 11 brightness levels, as well as tool-less Windage & Elevation adjustment.

If you are looking for a short tracer unit which maintains the illusion of being a suppressor, this NUPROL Tracer Unit does just that! Styled externally after a modern rifle suppressor, the NUPROL Tracer is a great addition to any CQB build thanks to its short overall length, and obviously, the intimidation factor glowing BBs provides. This tracer has an internal rechargeable battery that can be charged using the included Micro-USB cable, and can be mounted to any 14mm CCW male threaded barrel.

If you're into revolvers and seeking an affordable way to fill your holster, the HFC HG-132B Python 4" NBB Gas Revolver is ideal. This green gas-powered non-blowback revolver is inspired by the real steel Colt Python and works just like the real thing, with a rotating cylinder, removable shells and a functional double action/single action trigger. This is the chrome-finished model, denoted with a "C" suffix and rocking a mirror-shiny chrome finish which makes it stand out next to boring black pistols.

Being a revolver, the HG-132C will be a challenge to use in-game, and its lack of a HOP-up and relatively low FPS mean it is definitely more suitable for CQB than taking out targets at long range. Being constructed primarily from high-density polymer with an alloy outer barrel makes the HG-132C nice and light, leaning into its role as a last-ditch skirmish backup. If you have revolver fever and love a platform with style but don't want to shell out (tehee) too much, the HFC HG-132C Python 4" NBB Gas Revolver is the wheelgun for you!