All Spring Internals

Can be fitted inside other rifles including AEG gearboxes. The sorbo pad works by absorbing impact from your piston head, please note you should expect an FPS loss so you may have to improve the air seal or fit a slightly larger spring to regain your desired FPS.

A Steel trigger sear set for the L96 series of Airsoft Sniper Rifles / Bolt action Rifles. Once fitted into your Airsoft Gun this steel sear set will provide you with a tough and reliable bolt retain so you can rack your gun in confidence and spend less time worrying about parts breaking and more time getting your head in the game!

A 50 degree hop rubber for VSRs and unbridged barrels, designed to maximise range at a slight cost to accuracy. 

Next level of Airsoft sniper rifle hop-up rubber produced with similar materials and processes to Madbull's current line up of AEG hop-up components. 

If you're planning to upgrade your CYMA CM.700 or CM.708 sniper rifle, install this first! The CYMA Stainless Steel Cylinder for CM.700/708 Sniper Rifle is pre-assembled with a brass cylinder head, rubber O-ring and stainless steel cylinder with a welded bolt handle mount for maximum strength. The inner surface has been polished to reduce friction, improve efficiency and prevent excessive wear and tear when using strong springs. 

Compatibility-wise, this part set is only for the CYMA CM.700 and CM.708 series of spring-powered sniper rifles and is unlikely to work with other brands and models. As always, we only recommend upgrade parts like this for those with experience or the patience and willingness to learn. If you plan to install a super strong spring into your CM.700 or CM.708, this set should give it the strength it needs to last a lifetime!

Fine-tune your SSG10 with this Weight-Adjustable Piston from Novritsch, designed to enhance the performance of your SSG10 sniper rifle. Crafted with high-quality materials, this piston is the ultimate upgrade for tuning your SSG10 to make it shoot exceptionally with your different BB weights, barrel lengths, and the other interchangeable elements of your rifle.

The Novritsch SSG10 Drill Fluted Cylinder is a fantastic upgrade for your SSG10 sniper rifle. This gives your Novritsch sniper a wonderfully unique look, and additionally, it also reduces the contact surface when pulling the bolt, which results in a smoother and easier pull. It's the perfect balance of aesthetic and functionality improvement!

You will need to disassemble your SSG10 rifle and then reassemble it to install this part. This sounds tricky and intricate, but luckily for us, Novritsch has kindly provided a video showing you how to disassemble your SSG10, install the Drill Fluted Cylinder, and then reassemble the SSG10. Installation video attached. We only recommend upgrade parts like this for those with experience or the patience and willingness to learn.

If you've got feeding issues with your TAC-41 or you broke the feed ramp, the Silverback Airsoft Feeding Ramp Gen 2 for TAC-41 Sniper Rifle will get you up and running again. This is the Gen 2 feed ramp, boasting an improved design which prevents breakages when the magazine is loaded incorrectly. Compatibility wise, this feed ramp is only for the Silverback Airsoft TAC-41 sniper rifle series but should fit all variants. 

A CNC machined Aluminium Hop Arm / Pressure Plate for the Modify MOD24 Bolt Action Sniper Rifle.

The Stainless Steel Cylinder for CM.706 series comes as a set with a pre-installed brass cylinder head and is a replacement original part manufactured by CYMA themselves. This can be a handy part to have if you use your CM.706 at different sites with different FPS limits, as you can make a second cylinder and swap them out as and when you need (though this does require disassembly). The set includes both the cylinder and the cylinder head.

Looking to give your VSR-10 platform Sniper rifle a bit more range? The CYMA Upgrade set for CM.7061/VSR-10 will give you what you seek, with the added benefit of including reinforced parts! The set includes the piston, piston head and spring guide, all of which are machined from aluminium and finished in metallic blue, and a seriously high power spring which gives out approximately 575 FPS when installed! This set is compatible with most VSR-10 clone sniper rifles, including the JG BAR-10, CYMA CM.701 and the Well MB02/03/05/07/10.

A high quality replacement Hop up rubber, made to 50 degrees of hardness, and designed for VSRs, as well as KJW and WE Airsoft designs.

A 70 degree hop rubber for VSRs and unbridged barrels, designed to maximise range at a slight cost to accuracy. 

The Air Brake Pin blocks the cylinder head before impact producing an air "cushion" for the piston. As a result, the impact is dampened and the gun is more quiet. Included are 4 different lengths: 20 mm, 23 mm, 26 mm and 29 mm. The longer the length, the more of an air cushion resulting in a quieter shot, but it also reduces the FPS due to more of the air in the piston being used to dampen the impact. AirBrake pins are installed onto the piston head to make shooting the SSG-10 rifles quieter. They are compatible with upgrade parts such as the Novritsch SSG10 Weight Adjustable Piston. 

This is an advanced technical part, it is only recommended if you are confident in your upgrading abilities. 

If you've misplaced a screw from your SSG10 A3, the Novritsch SSG10 A3 Stock Screw Set is what you need! This set includes all of the stock screws for the SSG10 A3, constructed from steel and finished in black, just like the original screws. This screw set is only for the SSG10 A3 but may also be useful for those running the Maple Leaf MLC-S2 chassis on a VSR10 platform. 

A part placed inside the outer barrel of the Tokyo Marui G-Spec, designed to hold the inner barrel stable even whilst moving to provide a more accurate and stable shot. 

If you need a bit more range from your Novritsch SSG series sniper rifle, this spring will do it! The SSG 13mm Main Spring is compatible with any Novritsch sniper rifle with SSG in the name, along with the TAC338 platform. 

As impressive as the range of Novritsch sniper rifles already is, this spring should give you an FPS increase so you can engage targets at longer distances, though it will make your rifle more difficult to cock. If you're the type of sniper who prioritises effective range over mobility and speed, the SSG 13mm Main Spring will give you the range you need!

If you're running a spring-powered Dragunov SVD and want more accuracy, the AP Precision HOP-Up Chamber for SVD Spring Sniper Rifle is what you need. This CNC aluminium HOP-up unit is the gen.2 iteration of Airsoft Pro's SVD HOP-up chamber, offering a wider HOP-up arm to provide more side-to-side stability and a stronger HOP-up effect. The set includes the chamber, the HOP-up arm and a 3mm rubber roller which can be cut to size and used as a nub. 

The AP HOP-up chamber is compatible with the original SVD nub, bucking and inner barrel but can also make use of upgraded inner barrels, buckings and nubs designed for AEGs. This gives you access to one of the widest aftermarkets for upgraded parts with near-unlimited options, meaning you can set your SVD up to suit your needs perfectly. Compatibility-wise, this HOP-up chamber is only for spring-powered or CO2-powered SVDs from A&K, Koer, ACM or King Arms and won't fit AEG SVDs of any type. 

A wide range of 9mm power up springs for Airsoft sniper rifles, which are produced to a high standard, making them very close to their stated power outputs.

A two-piece stainless steel VSR/BAR10 spring guide, designed for enhanced performance and efficiency. The guide is compatible with most Airsoft springs featuring an internal diameter of 11mm or smaller. 

Replacement standard loading ramp and clip for Tokyo Marui AWS and Well MB44 Airsoft, spring powered sniper rifles.

Maple Leaf has quickly risen to become the market leader in HOP-up rubbers and inner barrels, and the Maple Leaf Wonder Bucking is the latest of their mould-breaking designs. The Wonder HOP-up bucking is designed with tighter groupings in mind, with a wide "r-hop" style contact patch and stabilising wings on either side. The Wonder sacrifices all-out range over the excellent Maple Leaf "Super" series of HOP-up rubber for greater precision and tighter shot-to-shot groupings, making it perfect for a setup with an emphasis on accuracy. 

High powered spring designed to give a little boost to your Airsoft spring sniper rifle or lower the fps to a safe limit depending on what is already installed.

It's time to give more range, accuracy and power to your beloved SSG 69. 

2mm thick spacers designed to pre-compress your spring slightly to increase the FPS of your sniper rifle. 

A part placed inside the outer barrel of the Tokyo Marui VSR-10 Pro, designed to hold the inner barrel stable even whilst moving to provide a more accurate and stable shot.