All Two-Tone Airsoft Guns

The sneaky counterpart to the Bolster Tuned CM.041 upgraded SMG-5 AEGs has returned and it's better than ever! Enter the CM.041 SD5 SMG-5 Upgraded Edition; a full metal SMG-5 SD5 replica built by the same team behind the ultra-high-end Bolster Armouries AEG series and previous Bolster Tuned AEGs.

As with its less discrete brethren, the first thing the Bolster Armouries team do with the CM.041 SD is to tear it to pieces and build it back up to fulfil its true potential. This new generation of Tuned SMG-5 is rocking a Warhead 27K Brushless Motor, Bolster Armouries EZO bearings, and a Bolster Armouries AOE Correction Washer along with complimentary parts to keep it running reliably long term. Replacing the basic CYMA ETU, we have the space-aged Gate ASTER™ ETU, offering a wealth of programming options and equipped with the latest EXPERT Firmware.

The HOP-up has been modified with Bolster Armouries HOP-up screws for better air seal and setting retention and a 4UANTUM Friction Pro High-Performance Hop Up Bucking was added to extend the range out to 60 meters and beyond. An FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding with the powerful Warhead brushless motor and an SHS Hardened Steel D Type Pinion Gear was added to cope with the higher levels of torque and speed. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of work was put in to refine the mass-produced CYMA gearbox and make it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER™ ETU. The cylinder windows have been radiused to increase the strength of the shell to withstand the force of repeated piston impacts, and the bearing holes in the gearbox shell have been smoothed out. The angle of engagement has also been corrected, meaning 11.1V LiPo's are a go for the Bolster Tuned CM.041 SD5 so you can hose the enemy down with a torrent of BBs like a fireman hoses a blaze.

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock CM.041 SD to a technician and paid for this amount of work to be done. Finally, we can pick up and play with an exceptionally well-built AEG with all the fine-tuning necessary for exceptional performance already complete, and done with care, to an exacting standard.

When we tested the Warhead Edition we were absolutely stunned; it's even faster than the original Tuned CM.041 SD! 320 FPS on the dot with remarkable consistency, 60m+ effective range and an absolutely scary rate of fire of 27 rounds per second; more than enough to outshoot anything else you can buy off the shelf!

If you're into the excitement and immersive experience of a GBB primary and need a CQB optimised platform, the VORSK VMP-2C Compact GBB SMG is one to watch. The smallest member of the VORSK VMP-2 line, the Compact is designed for cutting tight corners up close and also makes a killer backup platform to cover VMP-2D DMR users when the enemy gets too close!

Part of the VORSK Modular Platform ecosystem, the VMP-2C offers a wide range of customisation options, from quick-swap trigger groups to different power nozzles and alternative external parts, allowing you to make the VMP-2C truly yours with a custom touch. The 6.03mm tightbore inner barrel and HOP-up bucking are GBB/VSR spec, giving you access to the best of the best when it comes to accuracy and range upgrades.

On the outside, the VMP-2C reminds us of the iconic TEC-9 SMG reinvented for the 21st century, equipped with a 14mm CCW male threaded barrel, M4/AR-15 GBBR compatible pistol grip and 1913/20mm Picatinny stock interface at the rear, ready for the most modern stocks out there. If you're after a loud, violent and super-fun CQB platform which will never encounter a corner too tight to handle, the VORSK VMP-2C Compact GBB SMG should be your next platform!

If you're into the excitement and immersive experience of a GBB primary and need a CQB optimised platform, the VORSK VMP-2C Compact GBB SMG is one to watch. The smallest member of the VORSK VMP-2 line, the Compact is designed for cutting tight corners up close and also makes a killer backup platform to cover VMP-2D DMR users when the enemy gets too close!

Part of the VORSK Modular Platform ecosystem, the VMP-2C offers a wide range of customisation options, from quick-swap trigger groups to different power nozzles and alternative external parts, allowing you to make the VMP-2C truly yours with a custom touch. The 6.03mm tightbore inner barrel and HOP-up bucking are GBB/VSR spec, giving you access to the best of the best when it comes to accuracy and range upgrades.

On the outside, the VMP-2C reminds us of the iconic TEC-9 SMG reinvented for the 21st century, equipped with a 14mm CCW male threaded barrel, M4/AR-15 GBBR compatible pistol grip and 1913/20mm Picatinny stock interface at the rear, ready for the most modern stocks out there. If you're after a loud, violent and super-fun CQB platform which will never encounter a corner too tight to handle, the VORSK VMP-2C Compact GBB SMG should be your next platform!

If you're into the excitement and immersive experience of a GBB primary and need a CQB optimised platform, the VORSK VMP-2C Compact GBB SMG is one to watch. The smallest member of the VORSK VMP-2 line, the Compact is designed for cutting tight corners up close and also makes a killer backup platform to cover VMP-2D DMR users when the enemy gets too close!

Part of the VORSK Modular Platform ecosystem, the VMP-2C offers a wide range of customisation options, from quick-swap trigger groups to different power nozzles and alternative external parts, allowing you to make the VMP-2C truly yours with a custom touch. The 6.03mm tightbore inner barrel and HOP-up bucking are GBB/VSR spec, giving you access to the best of the best when it comes to accuracy and range upgrades.

On the outside, the VMP-2C reminds us of the iconic TEC-9 SMG reinvented for the 21st century, equipped with a 14mm CCW male threaded barrel, M4/AR-15 GBBR compatible pistol grip and 1913/20mm Picatinny stock interface at the rear, ready for the most modern stocks out there. If you're after a loud, violent and super-fun CQB platform which will never encounter a corner too tight to handle, the VORSK VMP-2C Compact GBB SMG should be your next platform!

In the real steel world, the 10/22 rifle platform is probably the last weapon anyone would choose to take into combat, but in the Airsoft world, you would be hard-pressed to find a more practical GBBR than the Novritsch SSQ22! This modernised Ruger 10/22 style replica puts performance first while providing the exciting blowback and realistic mag capacity GBBR enjoyers will appreciate.

On the outside, Novritsch has been up to his usual tricks, decking the SSQ22 out with an M-LOK handguard, lengthened 20mm Picatinny receiver rail and the up-and-coming 1913/20mm Picatinny stock mounting interface featured on the Sig MPX and MCX, amongst others. On the inside, the heart of the SSQ22's setup is its Maple Leaf flat HOP-up rubber which helps stabilise the BB in flight and ensures it enters the barrel precisely centred for more consistent shots down range. If you are thinking about giving the DMR playstyle a go but don't fancy running a 5KG SR25 setup the SSQ22 is the lightweight DMR platform you have been waiting for!

If you are looking for something modern, compact and unique with which to turn and burn in CQB the SigAir MPX AEG would be a superb choice. This mould-breaking new SMG is a near-perfect replica of the real Sig MPX, the 9mm SMG offspring of the legendary MCX carbine. 

The SigAir MPX is built like a tank, sporting full metal construction and precision CNC machining across its externals and flawlessly realistic SIG trademarks, and is pre-wired with a basic MOSFET to keep its trigger contacts protected as you lay down rapid semi-auto shots in CQB, in the MPX’s natural habitat.

If you've held off on getting a PPK-20, waiting patiently for the GBB version, get excited now! The WELL PRO WE06-GM PPK-20 Compact GBB SMG is based on the Tokyo Marui AKM GBBR internally, giving it astonishing consistency and superb gas efficiency, not to mention violent recoil!

Being a GBB SMG, this beast works just like the real thing, requiring the charging handle to be pulled before the first shot and providing shoulder-thumping recoil each time you squeeze the trigger, or over and over again if you flick the switch to full auto! Naturally, if you're new to GBBRs we recommend giving our guide a read but if realism is your thing, you won't look back!

While it looks the same as the AEG version, the WE06-GM is a whole new beast, boasting full metal construction with an authentic stamped steel receiver and top cover, a milled steel flash hider and superb quality aluminium parts. If you love the looks of Russia's latest SMG but need maximum realism, the WELL PRO WE06-GM PPK-20 Compact GBB SMG is waiting for you!

If long guns are your thing, you'll love this one! The Golden Eagle E6902M M-417 DMR Long AEG is based on the "Marksman" configuration of a well-known rifle we all recognise, boasting full metal construction, a pre-installed MOSFET and a tightbore inner barrel. The "Marksman" configuration has a 16-inch outer barrel and 13-inch handguard, giving you plenty of barrel length for maximum accuracy and extra rail space for a bipod along with your usual mission essential equipment.

On the inside, the E6902M is based around a version 2.5/version 2 long gearbox with enlarged cylinder group parts to provide greater air volume for improved performance with long inner barrels. The cylinder group parts are all version 2.5 spec, but the 18:1 steel gears are TM V2/3 compatible, meaning aftermarket high torque or high speed gears are well within reach for the upgrade fiends. If you have too many short platforms and need a reminder that size matters, the E6902M should do it!

If you love the sneaky styling of integrally suppressed M4s but prioritise a realistic build, the PTS Syndicate Griffin Armament MK1 M4SD M4/AR-15 AEG ticks both boxes! An almost dead-on replica of the real steel Griffin Armament MK1 M4SD, this full metal AEG is bristling with licensed PTS replica furniture front to back, including the Griffin SR M-LOK handguard, GP5 Suppressor, ECS™ stock and PTS EP trigger guard. As we might expect from PTS, this is a flawless build on the outside, though there is also plenty of good stuff internally!

Inside, we have the prolific version 2 gearbox with Tokyo Marui-spec internals, ideal for upgrade fiends. That said, the MK1 M4SD doesn't really need upgrading, equipped with an integrated MOSFET/ETU, CNC aluminium double O-ring cylinder head, steel 18:1 ratio gears, 8mm ball bearing bushings and a reinforced piston with a MIM steel tooth rack. Also inside is a 6.03mm tightbore inner barrel and alloy rotary HOP-up unit, giving you what you need to get the job done at long range.

The MK1 M4SD is available in two length variants: the 7.5-inch model, ideal for close quarters and fast movers, and the 10.5-inch version, ideal for multi-role use. If a primary with the "honey badger" look has been on your shopping list but a realistic build is essential, the PTS Syndicate Griffin Armament MK1 M4SD M4/AR-15 AEG belongs in your arsenal!

If you're looking for a gas pump-action shotgun with a menacing aura, the EMG Strike Industries M870 VOA Custom Gas Shotgun is what you need. This full metal M870 shotgun has had a full external makeover, including a flawlessly replicated Strike Industries VOA M-LOK handguard, "Strike" railed barrel camp and 20mm Picatinny receiver rail with a built-in "side saddle" which holds 6 shotgun shell magazines.

Internally, this beast is based around generation 2 of Golden Eagle's Type 870 series, boasting improved quality rubber seals, a built-in gas reservoir and compatibility with common tri-shot shotgun shell magazines. The system is based on the Tokyo Marui M870 and is capable of shooting either 3 or 6 BBs per trigger pull, making it a serious foe to contend with in a CQB scenario. Most upgrades and enhancements for the TM system should fit this monster, including HPA conversions, drum mags and other naughty accessories.

Those searching for shotgun functionality with a more exciting external aesthetic, the EMG Strike Industries M870 VOA Custom Gas Shotgun has your name on it! Every bit as intimidating as plain Jane 870s but with uniquely violent styling, the EMG M870 VOA Custom looks straight-outa space and we love it!

If you love the sneaky styling of integrally suppressed M4s but prioritise a realistic build, the PTS Syndicate Griffin Armament MK1 M4SD M4/AR-15 AEG ticks both boxes! An almost dead-on replica of the real steel Griffin Armament MK1 M4SD, this full metal AEG is bristling with licensed PTS replica furniture front to back, including the Griffin SR M-LOK handguard, GP5 Suppressor, ECS™ stock and PTS EP trigger guard. As we might expect from PTS, this is a flawless build on the outside, though there is also plenty of good stuff internally!

Inside, we have the prolific version 2 gearbox with Tokyo Marui-spec internals, ideal for upgrade fiends. That said, the MK1 M4SD doesn't really need upgrading, equipped with an integrated MOSFET/ETU, CNC aluminium double O-ring cylinder head, steel 18:1 ratio gears, 8mm ball bearing bushings and a reinforced piston with a MIM steel tooth rack. Also inside is a 6.03mm tightbore inner barrel and alloy rotary HOP-up unit, giving you what you need to get the job done at long range.

The MK1 M4SD is available in two length variants: the 7.5-inch model, ideal for close quarters and fast movers, and the 10.5-inch version, ideal for multi-role use. If a primary with the "honey badger" look has been on your shopping list but a realistic build is essential, the PTS Syndicate Griffin Armament MK1 M4SD M4/AR-15 AEG belongs in your arsenal!

If you're into competitive shooting with Airsoft guns or simply like to see beverage cans explode in the garden, this is the M870 for you! The Golden Eagle Type 870 M8871 Tactical Shotgun; CO2 Version hits out at a scary 400 FPS on 0.2g BBs approximately, meaning it isn't site-legal for skirmishing but makes a devasting target shooting platform with the added satisfaction of its awesome pump action mechanism and 3 or 6 shot fire modes.

Constructed with the same superb quality full metal exterior as the Green Gas version, the M8871 is ready for a red dot sight or scope to be mounted and comes equipped with highly functional ghost ring iron sights for those who prefer a minimalist setup. QD sling sockets are present on either side of the receiver and the set includes a QD sling swivel, ready for a single-point sling setup. If you'd love a shotgun but don't play much CQB, this CO2 powered menace would be the perfect backyard plinker!

If you're rocking a JW4 Pit Viper as your sidearm, this is what you need to complete the loadout! The EMG TTI JW4 Gen-12 Dracarys AEG; Kestrel Basic Version is an M4/AR-15 AEG on the inside and a detailed replica of the Taran Tactical Innovations Gen-12 Shotgun on the outside, boasting full metal construction, licenced trademarks from EMG, a KeyMod handguard, a super aggressive muzzle choke style flash hider and a massive 900rnd 12 gauge style magazine.

While this AEG may not shoot like a shotgun, that has its own benefits. Internally, the Gen-12 Dracarys is rocking a standard version 2 gearbox, M4/AR-15 rotary HOP-up unit and 6.03mm tightbore inner barrel, all of which are compatible with standard upgrade parts. This means you can deck the Dracarys out with the latest and greatest upgrade parts, benefitting from access to the widest aftermarket in the Airsoft industry. This, the latest version also comes with an EShooter Kestrel Basic ETU pre-installed, offering programmable fire controls including 3 round burst, binary trigger and much, much more!

With the EMG TTI JW4 Gen-12 Dracarys AEG; Kestrel Basic Version, you get the unique aesthetic of the Gen-12 shotgun used in the movie with unlimited upgrade potential and none of the proprietary and complex internals of electric shotguns. Time to dust off your tux, grow out your hair and beard and complete the JW4 look!

Looking for a pistol to match your space gun? Want a sidearm that feels as good in the hand as it shoots? The Archon™ Type B pistol from EMG has everything you would expect from a training-grade pistol. The real world Archon™ Type B was designed with specs coming directly from active duty US service personnel who had found current striker-fired pistols offered to be inadequate for their needs. This EMG Gas blowback is absolutely faithful to this, the ergonomic attributes of this pistol are unparalleled.

Looking for a pistol to match your space gun? Want a sidearm that feels as good in the hand as it shoots? The Archon™ Type B pistol from EMG has everything you would expect from a training-grade pistol. The real world Archon™ Type B was designed with specs coming directly from active duty US service personnel who had found current striker-fired pistols offered to be inadequate for their needs. This EMG Gas blowback is absolutely faithful to this, the ergonomic attributes of this pistol are unparalleled.

If you're into competitive shooting with Airsoft guns or simply like to see beverage cans explode in the garden, this is the M870 for you! The Golden Eagle Type 870 M8874 Tactical Shotgun; CO2 Version hits out at a scary 400 FPS on 0.2g BBs approximately, meaning it isn't site-legal for skirmishing but makes a devasting target shooting platform with the added satisfaction of its awesome pump action mechanism and 3 or 6 shot fire modes.

This version is rocking an extended receiver rail with a built-in 5-shell "side saddle", allowing you to carry 5 extra shotshell magazines on the side of the platform, well placed for fast access in the heat of the moment. Amongst the extended rails other perks are an extra QD sling socket on either side at the front and plenty of space to mount accessories, including the pre-installed Troy-style flip up aperture iron sights.

Constructed with the same superb quality full metal exterior as the Green Gas version, the M8874 also boasts QD sling sockets on either side of the receiver and the set includes 2 QD sling swivels, ready for a two-point sling setup. If you'd love a shotgun but don't play much CQB, this CO2-powered menace would be the perfect backyard plinker!

If you are a Dragunov fan but you want the latest and greatest version of the iconic Russian DMR rifle, this is what you need! The CYMA CM.057T is a great replica of the SVD-M, the latest SVD variant to serve with the Russian armed forces. The CM.057T boasts full metal construction with a large proportion of steel in its build and weighs a substantial but not over the top 3KG approximately, meaning your mobility will not be compromised when carrying the SVD-M.

This AEG is based on the Real Sword SVD design which means it is already locked to semi auto and uses a custom gearbox design with an advanced gear adjustable TDC HOP-up unit. This superb internal design pairs perfectly with the super long 690mm inner barrel to make the SVD-M a great base platform for a DMR build. If you are after a long-range platform and want to step away from more common DMRs, the SVD-M would be perfect!

An extremely authentic 1:1 scale Airsoft replica of the infamous Springfield M1903A3 bolt action rifle that saw service throughout WW1 and WW2, this spring powered replica is constructed from genuine wood and alloy.

If a Glock and 1911 had a child, we imagine it would look something like this! Meet the Hudson H9, a pistol that was set to change the world, until Hudson liquidated just two years after its unveiling at SHOT Show. It brought multiple patent-pending features together into one pistol design, something that caught many people's attention and left them wanting to try this pistol out for themselves.

The Airsoft version manages to capture the external design elements, but the internal parts are obviously different. Some of these external features include the M1911 straight pull trigger and the short recoil system that sits in front of the trigger guard. If you want a real steel licensed pistol that looks different from the rest, the EMG Hudson H9 Gas Blowback Pistol is for you!

Move fast and hit hard indoors or out with the ARCTURUS LWT MK-I M4/AR-15 CQB 10" AEG; SE™ MOSFET. Made from strong PA66 Nylon polymer for a perfect combination of strength and low weight, the MK-I M4/AR-15 may be cheap, but its 6.03mm tightbore barrel, pre-installed SE™ programmable MOSFET and high torque motor make it a rival for platforms twice its price!

Move fast and hit hard indoors or out with the ARCTURUS LWT MK-I M4/AR-15 CQB 10" AEG; SE™ MOSFET. Made from strong PA66 Nylon polymer for a perfect combination of strength and low weight, the MK-I M4/AR-15 may be cheap, but its 6.03mm tightbore barrel, pre-installed SE™ programmable MOSFET and high torque motor make it a rival for platforms twice its price!

Move fast and hit hard indoors or out with the ARCTURUS LWT MK-I M4/AR-15 CQB 10" AEG; SE™ MOSFET. Made from strong PA66 Nylon polymer for a perfect combination of strength and low weight, the MK-I M4/AR-15 may be cheap, but its 6.03mm tightbore barrel, pre-installed SE™ programmable MOSFET and high torque motor make it a rival for platforms twice its price!

The CYMA CM.008 M4 S-System is based on the old-school TM S-System AEG, complete with an SIR-style quad rail for mounting accessories and the hefty weight and realistic feel of full metal construction. The SIR rail system has the benefit of offering an uninterrupted upper rail for improved strength over comparable RIS systems and more space to mount larger optics such as riflescopes and red dot sight magnifier combos.

While the SIR rail system is a bit dated compared to M-LOK and KeyMod, the S-System design will be warmly remembered by some of us old hats, offering plenty of advantages compared with a standard RIS/RAS quad rail and is a great design for someone looking for the simplicity of a quad rail in a more unique and eye-catching design. On the inside, the CM.008 follows suit with CYMA's other full metal M4 platforms, boasting a reinforced v2 gearbox, high torque motor, alloy rotary HOP-up unit and 6.03mm tightbore inner barrel to top it off. If you want a solid M4 platform with rare and interesting externals and a full compliment of upgraded internals, the CM.008 should be high up on your list!

Offering you the best of both worlds, the SRC SR4 ST Falcon-ZS lets you choose between using SR4 AR9 and M4 STANAG AEG magazines by using the handy included receiver adapter. Its lightweight and compact design makes the Falcon perfect for run-and-gun CQB playstyles.

With an integrated suppressor and PDW stock for that operator style, the Falcon boasts a wealth of other features such as M-LOK front handguard, 20mm top rail and flip-up ironsights, 280 round 9mm magazine, as well as a removable magwell grip, the Falcon has a lot to love in a compact package.

If you like super-speedy real steel AR replicas, we're sure the PTS Syndicate ZEV Core Elite AR-15 Carbine AEG; 14.5 Inch will be on your mind! Patterned after a custom AR-15 from the high end of competitive shooting in the United States, the Core Elite AR-15 is bristling with detailed replicas of ZEV Technologies' finest parts, from the SSR adjustable trigger to the skeletonised "Wedge Lock" handguard, ZEV receiver set and "Slide Lock" ambidextrous charging handle. Also on board are the PTS EPG pistol grip and EPS-C sliding stock, giving you the best of the best when it comes to ergonomic furniture, straight out of the box!

Inside, the Core Elite AR-15 AEG is equipped with the prolific version 2 gearbox with Tokyo Marui-spec internals, ideal for upgrade fiends. That said, this ZEV AR doesn't really need upgrading, equipped with an integrated MOSFET/ETU, CNC aluminium double O-ring cylinder head, steel 18:1 ratio gears, 8mm ball bearing bushings and a reinforced piston with a MIM steel tooth rack. Also inside is a 6.03mm tightbore inner barrel and alloy rotary HOP-up unit, giving you what you need to get the job done at long range.

A slick AR replica inside and out, the PTS Syndicate ZEV Core Elite AR-15 Carbine AEG; 14.5 Inch is ready to rock with M-LOK or 20mm Picatinny accessories and is ready to go silent with a tracer unit or suppressor thanks to its 14mm CCW male threaded barrel. If you like discrete yet eye-catching styling paired with the top-tier PTS EP furniture and official licensing, you'll love the ZEV AR-15 Carbine!

A full metal M203 style Airsoft Grenade Launcher by Double Bell, designed to fit onto either a 20mm RIS rail or the underside of your M4A1 / M16 this 203 launcher adds a uniquely menacing look to your gun!

If you would appreciate the large gas reservoir of a Hi-Capa, but shiny race pistols aren't your style, the R504 may be what you have been searching for. The R504 sports Hi-Capa parts compatibility and a large magazine, coupled with aggressive military styling, suppressor height sights, a pre-installed thread adapter, and a Red dot sight mount plate included in the box.

If you like British military rifles, you'll love the Delta Armory DA-C09 CHARLIE™ 10" M-LOK M4/AR-15 AEG! This lightweight, affordable rifle has clearly been inspired by the real steel L403A1/KS-1, the rifle recently issued to the British Royal Marines. This Delta rifle is slightly shorter than that, closely resembling the KS-3, though for the price, it makes the perfect stand-in if you're looking for a modern military loudout.

The DA-C09 is equipped with a 6.03mm tightbore inner barrel paired with a rotary HOP-up, offering superb performance at long range and the ability to tune for different ammo weights. If you're after a low-cost, high-performance M4/AR-15 platform which is ready to rock with the most modern accessories, the Delta Armory DA-C09 CHARLIE™ 10" M-LOK M4/AR-15 AEG is one to watch!

If you like slick styling but want broad compatibility, the EMG Salient Arms BLU GBB Pistol should suit you perfectly! An officially licenced replica of the real steel Salient Arms International BLU, a significantly upgraded Glock, the EMG replica is based around the WE/Armorer Works EU17 internal system, offering plenty of compatibility with upgrade parts and phenomenal recoil thanks to its enlarged blowback unit.

Amongst its entirely reinvented externals, we are treated to an 11mm CW female threaded barrel with a pre-installed 14mm CCW thread adapter, an enhanced slide with loads of licenced trademarks, front and rear serrations and superb modern combat sights along with an upgraded frame designed for pure ergonomics and function; boasting reprofiled surfaces, extended controls and a feel worlds apart from an unaltered EU17. If you love high-end real steel pistols and want that vibe for your Airsoft sidearm, the EMG Salient Arms BLU GBB Pistol will put a big smile on your face!

If you like slick styling but want broad compatibility, the EMG Salient Arms BLU GBB Pistol should suit you perfectly! An officially licenced replica of the real steel Salient Arms International BLU, a significantly upgraded Glock, the EMG replica is based around the WE/Armorer Works EU17 internal system, offering plenty of compatibility with upgrade parts and phenomenal recoil thanks to its enlarged blowback unit.

Amongst its entirely reinvented externals, we are treated to an 11mm CW female threaded barrel with a pre-installed 14mm CCW thread adapter, an enhanced slide with loads of licenced trademarks, front and rear serrations and superb modern combat sights along with an upgraded frame designed for pure ergonomics and function; boasting reprofiled surfaces, extended controls and a feel worlds apart from an unaltered EU17. If you love high-end real steel pistols and want that vibe for your Airsoft sidearm, the EMG Salient Arms BLU GBB Pistol will put a big smile on your face!