ASG Airsoft

A 20mm RIS lower mounted point designed to stop the operator of the weapons' hand from sliding forward in front of the barrel. 

If you're looking for a unique muzzle device to top off your build, check this out! The ASG Flash Hider for EVO Carbine; 14mm CCW is constructed from aluminium and has a unique, slanted design with aggressive ports on each side. 

While it is designed for the ASG CZ Scorpion EVO 3 A1 it can be mounted on anything with a 14mm CCW male threaded barrel, so go wild!

A Glass Nylon Fiber constructed Magwell adapter for the ASG Scorpion Evo, which serves as a reference point for your lead hand, and makes guiding a fresh Magazine into the Magwell much easier to perform from memory, allowing you to focus your attention solely on the battlefield where it belongs.

A magazine for the VFC McMillian M40A3 6mm BB Spring Action Sniper Rifle and holds up to 20 BBs at a time.

A special mounting ring with three 20mm short rails on top and sides. Allowing additional accessories like lasers or lights to be attached.

If your CZ 805 is looking a bit battered, now may be the time to fix 'er up! The ASG Replacement Receiver Stock Hinge is a replacement original part for the ASG CZ 805 BREN AEG and is the part you need if your stock no longer locks into the deployed position. This is the receiver side of the stock mechanism and is constructed from high density polymer.

The perfect pouch for speedy revolver shenanigans! The Dan Wesson Revolver Speed loader pouch from ASG can hold a single 6 shot revolver speed loader and is an open-topped design for fast access. The pouch is constructed from rigid woven fabric and provides decent retention, meaning your speed loader will not fly out during a sprint! This pouch has a velcro loop at the rear for attachment, is compatible with standard belts (maximum 2-inch width), and can also be attached to MOLLE webbing loops. If you are building your Revolver Ocelot loadout, or you just fancy trying some speedy revolver trick shooting, this pouch will serve you well!

A High Capacity Magazine designed and built for the ASG CZ 805 Bren A1 Series of Airsoft 6mm AEG Rifles. The magazine is constructed from Polymer, with a Polymer Shell and Internals. 

Green Gas designed for use on gas powered Airsoft pistols, Rifles and Shotguns. The gas comes in a lightweight aluminium can and has a heavy duty metal nozzle meaning it won't snap. 

An intelligent auto-stop charger which allows you to charge all types of LiPo and LiFe battery used with Airsoft Guns. The battery features a Polymer Housing and charges batteries which house between Two and Four Cells. The charger supports both 7.4v, and 11.1v, the most common battery voltages for Airsoft LiPo. Included in the set you will find the charger itself, a charging lead with a mini-Tamiya connector and a UK power lead with a 3-pin plug. 

 This is the perfect charger for any Airsoft Skirmisher who wants a cheap charger which is of a high quality, rather than spending more money on a more high-tech charging unit. The charger is not unique to Airsoft, and can be used with any brand of LiPo and LiFe battery, and can also be used in RC Cars, Drones, Controllers, or anything with a removable LiPo battery.

If you are shooting so much you are emptying your bank account as fast as you empty your magazine, more affordable BBs are the key to keeping up the habit. Often, with affordability comes compromise, but not with ASG's Q Blaster BBs! These 6mm Airsoft BBs are supplied in a resealable bottle containing 3300 BBs approximately and are polished and coated for smooth reliable feeding. These are the 0.25G variety, perfect for the average AEG, shotgun or GBB pistol.

Tolerance is slightly wider than Blaster Devils but still minuscule, promising +/- 0.03mm variance at the absolute maximum. These BBs would be great for CQB use and use in platforms which won't need the extra precision of Blaster Devils to show the enemy who is boss!

A Standard powered Airsoft Battery, designed to be used in almost all Airsoft AEG weapons with a mini-Tamiya connector, providing the perfect amount of power for most Airsoft Weapons. 

If you are shooting so much you are emptying your bank account as fast as you empty your magazine, more affordable BBs are the key to keeping up the habit. Often, with affordability comes compromise, but not with ASG's Q Blaster BBs! These 6mm Airsoft BBs are supplied in a resealable bottle containing 3300 BBs approximately and are polished and coated for smooth reliable feeding. These are the 0.20G variety, perfect for the average AEG, shotgun or GBB pistol and especially good for CQB where the extra projectile speed of a lighter BB can be a huge benefit when engaging moving targets.

Tolerance is slightly wider than Blaster Devils but still minuscule, promising +/- 0.03mm variance at the absolute maximum. These BBs would be great for CQB use and use in platforms which won't need the extra precision of Blaster Devils to show the enemy who is boss!

If you need a pair of skirmishing goggles that will work well with a helmet, these are for you! This affordable pair of goggles come with yellow and smoked lens inserts as well as an adjustable elastic strap. They are ANSI rated Z87.1 meaning they are suitable for skirmishing, target shooting or cosplaying!

They have a rubber seal that goes around your eyes and have ventilation ports to minimise the fogging effect that most Airsoft goggles suffer from. The elastic strap is fully adjustable using the mechanism on the rear meaning that these goggles can be used over or under a helmet.

If you need some goggles for skirmishing and want something affordable which has a great field of view, you can't go wrong with the ASG Strike Systems Goggles EP-01!

If you have a sneaky playstyle a MK23 belongs in your arsenal! This phenomenally quiet Airsoft NBB pistol has been the sidearm of choice for Airsoft snipers since it was released, and it isn't hard to see why! 

The MK23 is super quiet thanks to its non-blowback action, and is exceptionally accurate and long ranged for a pistol in this price bracket. For those who simply must upgrade every Airsoft gun they own, the MK23 is compatible with VSR-10 style inner barrels and HOP-up buckings, meaning the accuracy potential for this pistol is practically limitless! 

ASG 20mm pistol/M4/AK/G36 laser sight designed to fit on the under side of pistols or attach to a 20mm accessory rail.

ASG MK23 Socom magazines are currently readily available at an affordable price. Delivering great gas efficiency too; on a good day expect up to three if not more full magazines worth of shots from one charge of gas.

A simple to use target for use with Airsoft 6mm BB Guns, designed to allow the user to practice their target shooting without having to stop and manually reset the targets.

A magazine for the ASG M4A3 SportsLine 6mm BB Gun and stores up to 27 BBs at a time.

Fully licensed by McMillan, this bolt action 6mm BB Airsoft sniper rifle is a 1:1 scale replica of the US Marine Corps’ M40A3 sniper rifle, complete with accurate McMillan branding.

If you are shooting so much you are emptying your bank account as fast as you empty your magazine, more affordable BBs are the key to keeping up the habit. Often, with affordability comes compromise, but not with ASG's Q Blaster BBs! These 6mm Airsoft BBs are supplied in a resealable bottle containing 3300 BBs approximately and are polished and coated for smooth reliable feeding. These are the 0.28G variety, perfect for outdoor skirmishes where you may need improved foliage penetration, wind resistance and consistency at long range.

Tolerance is slightly wider than Blaster Devils but still minuscule, promising +/- 0.03mm variance at the absolute maximum. These BBs would be great for a thrifty Airsofter with a long range leaning, and absolutely ideal for an LMG which may need to put down some serious volume of fire at longer ranges than average.

A pack of Shotgun Shells designed for Airsoft 6mm Pump Action Shotguns which accept Standard Shotgun Shells. The shells are easily loaded from the top, by using an Airsoft Speed Loader, by simply pushing the nozzle into the Shell's top hole and filling. These shells are a must have purchase for any Airsoft Skirmisher who has a pump action Shotgun, as it allows you to play for longer without having to stop to reload magazines.

A non-blowback Airsoft 6mm BB electric pistol which is based upon some of the world's most popular pistols, with all of the best bits taken and combined to create one unique pistol which is highly ergonomic.

A compact LiPo Airsoft Battery, designed to be used in tight awkward spaces, without compromising on overall capacity. 

The ASG Scorpion EVO 3 A1 is designed from the official specs of the real steel CZ Scorpion Evo Carbine created by Česká zbrojovka Uherský Brod, then built from the ground up for Airsoft By ActionSportsGames in Denmark. 

This edition of the Scorpion EVO is the 2020 revision of the original EVO featuring upgraded, rebuilt and more streamlined parts for better operation and more compatibility with aftermarket extras for those who like to upgrade. If you have a military-style EVO build planned, this is the version you need to spoof the EVOs issued to Canadian, Ukrainian and Czech soldiers!

The ASG Scorpion EVO 3 A1 is designed from the official specs of the real steel CZ Scorpion Evo Carbine created by Česká zbrojovka Uherský Brod, then built from the ground up for Airsoft By ActionSportsGames in Denmark. 

This edition of the Scorpion EVO is the 2020 revision of the original EVO featuring upgraded, rebuilt and more streamlined parts for better operation and more compatibility with aftermarket extras for those who like to upgrade. If you have a military-style EVO build planned, this is the version you need to spoof the EVOs issued to Canadian, Ukrainian and Czech soldiers!

The ASG Scorpion EVO 3 A1 is designed from the official specs of the real steel CZ Scorpion Evo Carbine created by Česká zbrojovka Uherský Brod, then built from the ground up for Airsoft By ActionSportsGames in Denmark. 

This edition of the Scorpion EVO is the 2020 revision of the original EVO featuring upgraded, rebuilt and more streamlined parts for better operation and more compatibility with aftermarket extras for those who like to upgrade. If you have a military-style EVO build planned, this is the version you need to spoof the EVOs issued to Canadian, Ukrainian and Czech soldiers!

If you want to sharpen up your target shooting skills, or you want a pocket rocket for skirmishing the Dan Wesson 2.5 inch revolver would be a fine choice. This Airsoft revolver is constructed from alloy with polymer grips, giving it the hefty and authoritative feel of a full metal replica, and it feels from realistic metal cartridges with a swing-out cylinder, just like the real thing. This is the high-power version of the Dan Wesson platform, and comes with 6 high-power shells, but is also compatible with low-power shells if you want to skirmish it as a standard sidearm.

A screw-top bottle that contains 3300 high quality, competition-grade 0.28g BBs from ASG, which are carefully selected to make the cut for the 'Devil' series - a premium range compared to the standard Blasters. They are made with a fine Tolerance of 0.01mm to ensure optimal performance in all Airsoft Guns. The 0.28g BBs are a great option for those playing outdoors, particularly if you have a gun with a strong HOP unit and want to keep overall BB costs down whilst maintaining top-tier performance.

A Gas Blowback Airsoft 6mm BB Pistol, which has been designed and created based off the CZ P-09 Duty and fully licensed by CZ from Czech Republic. The Pistol externally is constructed almost entirely from Polymer, with a Polymer Slide and Frame, but features Alloy Sights and Internals.