All External Airsoft Parts & Attachments

If you want to add a grip to your railed AK platform but want to keep it Russian, this is the grip you need! The 5KU Aluminium Russian Compact Foregrip; 20mm Picatinny is constructed from aluminium with a ribbed external design to improve handling and add traction. Inside the grip, we are also treated to a storage compartment designed for CR123a batteries, though you can store other items inside (we use ours for sweets). 

This grip is based on the popular Zco-style vertical grip often seen on styled-up AK platforms with other Zco furniture. If you want to add modern attachments to your railed AK but want to keep it purely Russian, this grip belongs on your gat!

A replacement ergonomic pistol grip for M4, M16 and AR-15 Platform AEG Receivers, simply replacing the original grip. 

A replacement ergonomic pistol grip for M4, M16 and AR-15 Platform AEG Receivers, simply replacing the original grip. 

The AK series of rifles is famous for many things, but having the best iron sights is not one of them. The AK Rear Sight Rail For Red Dot Optics from 5KU replaces your AK's rear iron sight but retains basic functionality with its built-in emergency backup sights while providing the option to mount a red dot sight!

Designed specifically for Micro red dot sights, the 8 20mm Picatinny rail slots provide plenty of room for larger red dots but it would look rather silly. It's your AK though, make the purists cry if you feel like it!

A tactical folding Vertical Foregrip, designed for use with Airsoft AEG and GBB rifles, which allows the user to flip it down when required and fold back up when not in use to give it a lower profile.

A Mock Suppressor designed to fit on Airsoft 6mm BB Gun Assault Rifles, and is branded to look like it is a Special Forces SOPMOD Supplied Suppressor. 

Those of you wanting to mount an optic or torch closer to your handguard without mounting to the handguard itself, you have found your answer. Attached to M-LOK system, the mount is offset by 45 degrees, meaning the rail is closer to the barrel, and gives you additional flexibility on where you want your rail and subsequent light/optics etc. mounting. An advantage of this mounting method is that it makes your device easier to reach and use, as well as limiting obstruction to other accessories.

The rail is a 20mm Picatinny type, measuring roughly 2.5 inches and is attached to M-LOK system using the included screws, nuts and Allen key. Featuring aluminium alloy construction, the mount is both tough and lightweight, which will complement any loadout.

If you are looking for an uncommon tracer unit design with muzzle flash functionality, the T238 Griffon Tracer unit is one to watch. This unit has a unique triangular housing giving it a cutting-edge look, styled similarly to the real steel Griffin Blast Shield and is constructed from aluminium with a thick polycarbonate aperture cover on the front.

This unit offers both tracer and muzzle flash functionality, allowing you to use either muzzle flash, tracer or both, with mode selection applied via the rear "on/off" button. Powered by an internal rechargeable battery charged via micro-USB, this tracer is convenient and economical to run and can support rates of fire up to an absolutely epic 50 rounds per second! No matter how speedy your build is or how much you value realism, this tracer unit has both bases covered!

The UNITY mounts are being favoured world wide due to their slim profile & efficient riser, making them an excellent candidate for using with PEQ / Laser pointers mounted on the upper rail.

If you're in the market for a small tracer unit but want one with a muzzle flash, the Eshooter Flare Cube BT Tracer Unit with Muzzle Flash is your best bet. This compact tracer unit has an ultra-low profile design, measuring approximately 6cm long with a 4cm height and offers muzzle flash functionality in a wide variety of colour options along with standard tracer functionality.

Being so small and light, the FLARE Cube BT is ideal for mounting on GBB pistols and is also an asset to any CQB skirmisher who requires a tracer that doesn't compromise handling qualities or add too much extra length to their primary. As it comes, the FLARE Cube BT is ready to be mounted on 14mm CCW male threaded outer barrels but also includes an 11mm CW adapter for use with WE and Armourer Works pistols. If you run a RAVEN or VORSK pistol, use a 12mm CW to 14mm CCW adapter to mount the Flare Cube BT. Novritsch or Army Armament pistol owners, no need to feel left out, use a 12mm CCW female thread adapter so you can rock the FLARE Cube BT too!

Powered by an internal rechargeable battery and charged via the included USB Type-C charger cable, the FLARE Cube BT charges quickly using the most recent cable type and comes with detailed instructions so you can master its wealth of functionality easily. Whether you run an SMG, Rifle, GBB Pistol or sniper rifle, the FLARE Cube BT is the perfect way to add tracer and muzzle flash functionality to your setup without adding weight or making your primary unwieldy!

If you have invested in a Tokyo Marui VSR-10 Pro and you want to add an optic, this 20mm receiver rail will do the trick! The Slong Airsoft Receiver 20mm Rail Mount For VSR-10 Sniper Rifle is designed to replace the rear iron sight on the Tokyo Marui VSR-10 Pro sniper rifle but can also be used to replace a worn-out rail on VSR-10 clones or the TM VSR-10 G-Spec sniper rifle.

The rail is constructed from aluminium and finished with matt black anodising, keeping the surface coating thin to ensure the rail remains in spec and capable of mounting any optical sight which fits 20mm Picatinny rails.

A NYLON Constructed Moderator / Suppressor cover, ideal for those who want to keep their muzzle hidden & protected.

A NYLON Constructed Moderator / Suppressor cover, ideal for those who want to keep their muzzle hidden & protected.

A NYLON Constructed Moderator / Suppressor cover, ideal for those who want to keep their muzzle hidden & protected.

A NYLON Constructed Moderator / Suppressor cover, ideal for those who want to keep their muzzle hidden & protected.

A NYLON Constructed Moderator / Suppressor cover, ideal for those who want to keep their muzzle hidden & protected.

If you are in the market for a compact lightweight but very effective flashlight, then look no further! The WADSN M300C Scout Light; Dual Switch Version is a superb choice for skirmishers who are afraid of the dark, or at least what may lurk in those dark corners. This flashlight comes in two colour variants so you can match it with your loadout to keep everything looking uniform, very tactical!

The flashlight mounts onto the common Picatinny rail using its 20mm rail mount. This means it can be attached on most standard platforms with ease. Keep the future bright and those dark rooms brighter with a WADSN M300C Scout Light; Dual Switch Version!

If you've misplaced your Crane stock's butt plate, here you go! The Delta Armory Butt Plate for Crane M4/AR-15 Battery Stock is a replacement original part and should fit the vast majority of Airsoft Crane stocks, particularly those from Delta Armory, Specna Arms and Lancer Tactical. The butt plate is constructed in two parts; with the base being high density polymer and the outer coating being grippy rubber with lattice texture on its surface.

As mentioned, this should fit almost any Airsoft Crane stock out there but we haven't tested them all, so proceed with caution and remember we cannot accept returns on any butt plate that has been modified.

If you're finding your current battery running out too quickly and have nowhere to store a larger battery this battery extension from Hades Airsoft has got you covered!

A PDW stock extension built from high density polymer, design specifically for the Double Eagle replica. Models include the M904G, M904C, M904L and M904R.

Keep yourself in the fight and shoot for longer durations with battery storage up to 16 cm within the stock.

A 20mm Railed MK18 Handguard for AR Platform AEGs and GBB replicas, which is ideal for those searching for the 'Special Forces' look. It is constructed to a lovely standard from Aluminium and features Numbered Rail Slots for the precise placement of accessories. The bottom Rail measures a total of 21.3cm, and the other three at 24.4cm. If you're looking to spice up your AR with some external furniture, then a Handguard swap is a great place to start.

If you're worried about losing your RMR red dot to a BB impact, cast your concern aside and add this to your setup! The JJ Airsoft Kill Flash Lens Protector for RMR Red Dot Sights is designed to mount to the front of an RMR or RMR clone micro red dot sight and protect the lens from BB impacts along with reducing glare so your shiny objective lens doesn't give you away. 

If you want to protect your lens while keeping your setup looking realistic, this is the way to go! 

A replacement for the original selector lever on your AK AEG. Available in two types; Type A with an extension or Type B which is a standard AK selector lever. These are designed for CYMA AK rifles but should be compatible with most other AK AEGs.

A replacement for the original selector lever on your AK AEG. Available in two types; Type A with an extension or Type B which is a standard AK selector lever. These are designed for CYMA AK rifles but should be compatible with most other AK AEGs.

If you want your AEG to send shivers down the enemy's spine, if anything can do it, this muzzle brake can! The 5KU DTK-2 Russian AK Muzzle Brake is patterned after the real steel Zenitco DTK-2 and is a squat design with a pair of massive ports on each side and two smaller ports on the bottom.

The real device is designed to reduce felt recoil and compensate for muzzle climb and is generally seen on carbine and SBR length AK rifles, though the 5KU example will fit both 14mm CCW and 24mm CW Russian threads, making it compatible with practically any Airsoft gun on the market. If you want to change up the looks of your rifle and make it that bit more menacing, this brake will do it!

A mock PEQ Box, designed to hold PEQ size Airsoft batteries, but can be extended with the use of an included extension module for larger batteries.

A mock PEQ Box, designed to hold PEQ size Airsoft batteries, but can be extended with the use of an included extension module for larger batteries.

Those of you wanting to mount an optic or torch closer to your handguard without mounting to the handguard itself, you have found your answer.

Attached to Picatinny system, the mount is offset by 45 degrees, meaning the rail is closer to the barrel, and gives you additional flexibility on where you want your rail and subsequent light/optics etc. mounting. An advantage of this mounting method is that it makes your device easier to reach and use, as well as limiting obstruction to other accessories.

The rail is a 20mm Picatinny type, measuring roughly 2.25 inches and is attached to Picatinny system using the included screws and Allen key. Featuring aluminium alloy construction, the mount is both tough and lightweight, which will complement any loadout.

An Airsoft bipod with rubber feet for stabilizing Airsoft platforms while shooting from fixed positions. This bipod is compatible with any rifle which has a Picatinny 20mm rail for mounting but also comes with an L96 spigot mount for using this rifle on L96-type rifles with the spigot socket at the front of the stock.

If you want to add some ambidextrous functionality to your M4/AR15 AEG or KWA ERG platform along with a hint of flare, this charging handle from PTS Syndicate would be perfect! The Radian Raptor-LT is based on the real steel Radian Raptor ambidextrous charging handle and includes licenced Radian trademarks laser engraved onto the handle itself.

To add a custom aesthetic, PTS has produced this charging handle with red or black levers on either side, giving your receiver a nice pop and letting observers know your gun has the custom touch!

If you want to add some ambidextrous functionality to your M4/AR15 AEG or KWA ERG platform along with a hint of flare, this charging handle from PTS Syndicate would be perfect! The Radian Raptor-LT is based on the real steel Radian Raptor ambidextrous charging handle and includes licenced Radian trademarks laser engraved onto the handle itself.

To add a custom aesthetic, PTS has produced this charging handle with red or black levers on either side, giving your receiver a nice pop and letting observers know your gun has the custom touch!