All Airsoft Guns

If you like AKs but don't like their weight, the S&T AK-74N Sports Line AEG is the AK for you! This AK-74N replica is constructed from high-density polymer with choice alloy and steel parts to add strength where needed. This means, despite being an AK replica this beast tips the scales at a mere 2.3kg, giving it agile handling ideal for aggressive skirmishers or younger players with less physical strength.

Inside, we are treated to some thoughtful pre-upgraded parts, even in this cost-effective"Sports Line" AEG. The inner barrel is a 6.02mm tightbore example, offering improved accuracy and a slight raise in FPS from air seal improvements. The gearbox is version 3, with an alloy shell and steel 18:1 ratio gears running on 8mm steel slide bearings, meaning a smooth gearbox report with compatibility with common upgrade parts for those who want more. If you like the idea of a featherweight AK and are into the Cold War aesthetic, this is the AK to go for!

If you're after a beginner-friendly M4/AR-15 AEG with a cutting-edge aesthetic, the Delta Armory DA-C08 CHARLIE™ 8" M-LOK M4/AR-15 AEG is one to watch. Made from high density polymer with an alloy outer barrel, this build is super light and agile, fantastic for younger players with limited physical strength, though the lightweight build does not necessarily mean compromise!

On the outside, the DA-C08 is rocking an M-LOK handguard with 20mm rail sections pre-installed and a 20mm Picatinny railed receiver, ready for a red dot sight, scope or any other accessory you choose to mount. The outer barrel is threaded to 14mm CCW, meaning common suppressors and tracer units will mount with minimal fuss. Internally, things are equally impressive!

The DA-C08 is based around the common V2 gearbox with an alloy shell, 18:1 ratio steel gears running on 8mm bushings and a reinforced SHS tappet plate and piston with a full steel tooth rack. The inner barrel is a 6.03mm tightbore paired with a rotary HOP-up, giving you the kit you need to get good effect on targets downrange. With a compact CQB-friendly form, pre-upgraded internals and full aftermarket compatibility, the DA-C08 CHARLIE™ from Delta Armory is a fantastic starter AEG or base for a custom build!

Used by British Forces and many more around the world, WE Europe brings us the iconic and ever-present F226 E! as an Airsoft pistol. This Airsoft replica comes with a whole host of features including realistic gas blowback recoil, front rail and functional decocker. 

Built from high density polymer with a sturdy alloy slide, this F226 continues on from WE Europe's trend of putting together reliable and gas efficient pistols with a quick cycle rate , snappy recoil and robust internals.

If you are looking for a primary for your Vietnam war loadout this will do the trick! Complete with period accurate XM177E1 sound and flash moderator and 2 position XM177 style stock, the CM.009D XM177E1 is the old school tacticool carbine from a time before the M4!

If you want the standard M4 layout but prefer standing out on the battlefield, the EMG CM.108 Spike's Tactical Spartan M4/AR-15 AEG is a great choice! This rifle will certainly have you feeling stoic, boasting a skeletonised handguard and a very unique Spartan magazine well, extremely unconventional and not seen before in Airsoft.

The CM.108 is what happens when EMG, CYMA, and Spike's Tactical join forces to make a fully licensed, full-metal Airsoft replica. It features a striking, skeletonised handguard and is complete with RIS and M-LOK rails, as well as adjustable mechanical aperture iron sights.

Stand out from the crowd with your own officially licensed, custom M4 SBR, which is perfectly weighted and perfectly balanced for a sweet look and an even sweeter skirmish experience. Plus the CM.108 comes equipped with CYMAs Platinum series internals, including a silent piston head, high-speed motor and high-speed gearset.

If you are looking for something to keep heads down at an outdoor skirmish, or something to upgrade to a DMR in the future, the CM.068D is perfectly suited to the task! This M4/AR15 platform AEG sports full metal construction, a 6.03mm tight bore inner barrel, long quad 20mm Picatinny rail handguard, and extended controls, but the real icing on the cake is its silent piston and cylinder heads, which significantly muffle the gearbox noise. This rifle is a few choice upgrades away from DMR capability, but performs surprisingly well as it is!

A Rifle length 6mm Airsoft Gun, based on the widely used M4 with the suppressor on this airsoft weapon is sunk into the rail system to give it a unique look.

A Rifle length 6mm Airsoft Gun, based on the widely used M4 with the suppressor on this airsoft weapon is sunk into the rail system to give it a unique look.

If you need a genuine bullet hose to support your squad effectively in game, the M249 platform should be of interest! This M249 variant is the MK46 SPW, designed as a more compact and lightweight SAW for issue to special forces units of USSOCOM, as well as the US Army Rangers. The MK46 is an M249 stripped down to the bare bones and built back up with more rails than most of us would know what to do with as well as an M4/AR-15 style stock tube and sliding stock for improved adjustability and compatibility with hefty body armour vests.

This version of the A&K MK46 SPW AEG is the polymer receiver model which shaves the weight down to a more manageable but still significant 4.9kg while keeping the essential parts in alloy and steel for strength where needed and extra realism. Included with the MK46 is a 2400rnd auto winding box magazine with sound control which should keep this beast well fed, directly in line with its role to provide fire supremacy. If you need something which has a presence on the field and fits in perfectly with any Special Forces style loadout, the MK46 will do the trick!

If you need a genuine bullet hose to support your squad effectively in game, the M249 platform should be of interest! This M249 variant is the MK46 SPW, designed as a more compact and lightweight SAW for issue to special forces units of USSOCOM, as well as the US Army Rangers. The MK46 is an M249 stripped down to the bare bones and built back up with more rails than most of us would know what to do with as well as an M4/AR-15 style stock tube and sliding stock for improved adjustability and compatibility with hefty body armour vests.

This version of the A&K MK46 SPW AEG is the polymer receiver model which shaves the weight down to a more manageable but still significant 4.9kg while keeping the essential parts in alloy and steel for strength where needed and extra realism. Included with the MK46 is a 2400rnd auto winding box magazine with sound control which should keep this beast well fed, directly in line with its role to provide fire supremacy. If you need something which has a presence on the field and fits in perfectly with any Special Forces style loadout, the MK46 will do the trick!

The VZ.58 is not an AK, do not get confused! It may share some silhouette similarities but the VZ.58 is a unique platform that was the standard service rifle for the Slovakian military from 1959 to 1984. This Delta Armory replica is licensed by the Real Steel Firearms company Czech Small Arms which is the only manufacturer of SA VZ.58 rifles. The DA-VZ58 is based on the SA VZ.58 Sporter Carbine except with a longer outer barrel. The trademarks to indicate this can be found on the AEG.

Internally, the DA-VZ58 features some of the high-quality pre-upgraded Delta Armory internals such as an EFCS programmable MOSFET 18:1 ratio steel gears, a quick change spring system, a unique gearbox design and a high torque motor. The EFCS MOSFET allows the fire modes to be reprogrammed for burst modes and semi-auto only using the Ares EFCS programmer (available separately) and also features a low-voltage cutoff function, protecting your battery from being damaged if the voltage drops too low.

If you skirmish in a suit with a silverballer, you need this rifle! The Ares MSR-WR Takedown Sniper Rifle Kit with Hard Case is one of the coolest Airsoft guns we've seen in some time; a unique takedown-style bolt action sniper rifle which can be disassembled in minutes to be stored in its own unique hard case.

The set also includes a mini bipod with extendable legs which mounts to the pre-installed bipod spigot on the front of the chassis, giving you everything you need to get sniping other than your choice of optic, though Ares left space inside the hard case for an optic or suppressor, depending on your needs.

Internally, the MSR-WR (M200/EDM200) is compatible with upgrade parts for the Ares TX sniper rifle system, broadly based on the VSR-10 design, though we are currently unable to confirm VSR compatibility. The HOP-up unit is a TDC type using a grub screw to adjust, promising an improved ability to hold its setting and less side-to-side deviation than a standard VSR slider HOP-up. Out of the box, the MSR-WR hits out at a tasty 420 FPS using 0.2g BBs and its short and easy bolt pull makes it fantastic for rapid follow-up shots. If you're a fan of takedown rifles or want an assassin-style primary for your Agent 47 loadout, the Ares MSR-WR Takedown Sniper Rifle Kit with Hard Case will suit you perfectly!

Now this is one seriously long pistol! The perfect sidearm for a desperate sniper who has had their cover blown. Full auto only may seem like a curse at first, but when you're caught out by surprise and have mere seconds to react, the ability to mag dump in less than three seconds is certainly one way to try and wiggle your way out of an almost certain loss.

This Hi-capa GBB platform takes a step aside from the norm with an intimidating potato masher compensated front end and a lengthy 20mm Picatinny frame rail, boasting full metal construction for ferocious recoil and a realistic feel in the hands. As a pistol ready for serious breaching, the Black Dragon Hi-Capa 7.0 GBB Pistol is a lot faster than its size might suggest.

With a split slide to improve gas efficiency and increase the cyclic rate to lightning-quick full auto speed, this pistol is perfect for those who want to make plenty of noise and shoot plenty of BBs!

If you are the type to go big or go home, the Double Bell Desert Eagle GBB Pistol belongs in your holster(if it fits)! This Desert Eagle Airsoft replica is based on the Tokyo Marui design and features a metal outer barrel, polymer slide and a polymer frame, keeping the weight of this monster manageable but still way above average.

As with the original TM Deagle, this big boy has the immense recoil any Desert Eagle GBB deserves and also boasts the well-hidden rotary adjustable HOP-up that many other TM clones lack. If you have the burning desire to run a big iron on your hip, this isn't a revolver but it sure is big!

A highly ergonomic pistol for anyone with any hand size. Full metal slide and mechanical parts allows for a crisp semi action shot.

A custom Airsoft 6mm BB Gun with a brand new slide and a unique lower frame, with tonnes of extra added features to greatly improve the pistol and increase the users effective capabilities. 

If you're searching for your first Airsoft sidearm and want it to be a real killer, the Novritsch SSP1 CO2 Hi-Capa GBB Pistol; Pre Two-Tone is exactly that. Boasting full metal construction with the unique Novritsch external aesthetic, the SSP1 is also thoroughly pre-upgraded on the inside, giving it a longer lifespan and significantly improved performance when compared to the average GBB pistol. 

Inside, you'll find a 6.03mm tightbore inner barrel paired with the impressive Novritsch Purple HOP-up bucking housed in an alloy HOP-up unit, providing exceptional accuracy and range for a pistol and allowing heavier BBs to be used for further long range performance. 

All of the hammer group components are constructed from steel, giving you a massive reliability advantage and seeing to known weak points in other GBB sidearms. The loading nozzle is reinforced in key places to extend the SSP1's lifespan and the magazine has been enhanced with the Novritsch gas route bucking, providing a tighter seal with the nozzle for improvements in shot-to-shot consistency and reduced gas wastage. 

Being finished in Pre-two tone blue, this version of the SSP1 is ideal for those who don't yet have a UKARA membership or other VCRA defence, or those who appreciate an eye-catching sidearm with a stylish look. In its CO2-powered form, the SSP1 is a bit too hot FPS-wise for skirmish use during the summer, but throw a Novritsch 30rnd Magazine for Hi-Capa GBB Pistols; V3 in there and you'll get around 320 FPS +/- 10% on 0.2g BBs, ideal for skirmishing at any site in the country. Keep your CO2 mag handy though, it will really come into its own during the winter months when everyone else's sidearm is gassing out! 

A Fully Automatic and Semi Automatic Generation 4 (Gen4) Gas Blowback Airsoft 6mm Pistol, designed with the longest barrel of the series, giving it the most power and kick out of all the EU-Series range.

The BO Dynamics DIAMONDBACK DB15 AP300 7" M4/AR-15 AEG is a lightweight and beginner-friendly rifle, it is constructed from a high-density polymer that is scratch-resistant. It also features a preinstalled Helios trademarked muzzle attachment that looks incredible. This package also includes an 11.1V crane battery, a balance charger and 2x 20mm Picatinny rail sections. This is a brilliant deal for new players and is a great way to get your Airsoft career started.

This AEG is also equipped with a MOSFET and programmable firing modes, this is an amazing feature for the relatively low price and gives newer players a chance to experiment with different firing modes and will protect your rifle from short circuits and burnouts.

If you're a fan of staying light on your feet, sneaking up on the enemies and generally causing mayhem on the battlefield, then the BO Dynamics DIAMONDBACK DB15 AP300 7" M4/AR-15 AEG is perfect for you and your playstyle!

The Hi-Capa 6" Force A-2 is a series of Gas Blowback Airsoft Pistols built upon the Hi-Capa Platform, which means they have big gas reservoirs and work extremely well. They are also available in an absolutely huge range of colours and designs, which will be listed below. The main party trick of these Pistols is that they are Full Auto/Semi ,  making for an ideal Sniper Backup or Pocket Rocket for the aggressive Airsoft Player.

If you ever thought the EU series was falling behind the Hi-capa platform as far as options are concerned, think again! Introducing the EMG SAI BLU, an enhanced EU17 pistol with all the bells and whistles! The SAI BLU sports a tactical slide with front and rear serrations, raised suppressor height sights, a threaded barrel with 14mm CCW adapter, and the ability to mount a red dot sight with any of the included 4 mounting plates!

Don't want to fall in line with all the other M4 users? Well then, get a rifle with a Crusader helmet on the mag well, it doesn't get any more unique or cool than this! This rifle will certainly have you feeling powerful, boasting a skeletonised handguard and a very unique Spike's Tactical Rare Breed Crusader magazine well, extremely unconventional and not seen before in Airsoft.

The CM.107 is what happens when EMG, CYMA, and Spike's Tactical join forces to make a fully licensed, full-metal Airsoft replica. It features a striking, skeletonised handguard and is complete with RIS and M-LOK rails, as well as adjustable mechanical aperture iron sights.

Stand out from the crowd with your own officially licensed, custom M4 SBR, which is perfectly weighted and perfectly balanced for a sweet look and an even sweeter skirmish experience. Plus the CM.107 comes equipped with CYMAs Platinum series internals, including a silent piston head, high-speed motor and high-speed gearset.

Featuring all of Tokyo Marui’s usual high-quality standards of construction and design, this is a gas powered non-blowback replica of Kel-Tec’s futuristic looking bullpup KSG shotgun, as seen in many videogames and movies.

If you're in search of an M4/AR-15 AEG and seek a more realistic feel and weight, the Ares X-Class Model 6 AR-090E M4/AR-15 AEG is what you need. This full metal M4 platform is a unique Ares design inspired by the most modern AR platforms in the real steel world, boasting a uniquely design receiver with waffle gripping texture, an M-LOK handguard and compact PDW sliding stock. One of the coolest aspects of the externals is the Ares slim pistol grip, designed to mimic the dimensions of real AR grips for a GBBR-like realistic feel!

Inside, we are equipped with a version 2 gearbox with 18:1 steel gears, a quick change spring system and the Ares EFCS MOSFET, providing programmable fire controls using an Ares EFCS programming box (not included) and low voltage cutoff to protect your battery. The EFCS also improves electrical efficiency and pairs perfectly with the pre-installed slim high torque motor to provide a snappy trigger response in semi, ideal for pumping out suppressive fire in CQB. If you want a solidly built, realistic AR that isn't a GBBR, the Ares X-Class Model 6 AR-090E M4/AR-15 AEG is a fantastic choice!

I bet you never thought you would see something like this on our website! The Arrow Dynamics Panzerfaust 40mm MOSCART Grenade Launcher is one of a kind, bringing a forgotten WW2 platform to the world of Airsoft. It is an unusual platform to see in the Airsoft world and would certainly be difficult to skirmish, but we would love to see you try it!

Usually, when brands make WW2 replicas, they focus on the iconic real wood rifles like the Kar98k or Lee Enfield, and if not, they go for the classic SMGs like the PPSH or MP40. Arrow Dynamics has completely flipped that stereotype on its head, delivering a replica of a launcher that most people had forgotten about due to its bigger brother, the Panzerschreck, taking the spotlight in modern media as the go-to German rocket launcher.

If you are after a DMR to match your UKSF loadout, you have found it. The Umarex HK417D AEG is a seriously well built and faithful replica of the HK417, chosen marksman's rifle for special forces all around the world. Put this down next to a real HK417 and you will be hard-pressed to pick out the right one for your Milsim skirmish!

If you are looking for a Thomspon SMG but you have very high standards for realism, this should pique your interest! The CyberGun M1A1 Thompson is a gas blowback replica of what is probably one of the most famous submachine guns of World War 2 and boasts full metal construction with flawless Auto-ordnance Corporation trademarks and highly detailed faux wood furniture. 

The KRYTAC Kriss Vector is back in business in a gorgeous Limited Edition Alpine finish. Featuring a new MK5 Modular Rail, E-Trigger, Quick Change Spring, Rotary HOP Unit, 30K High Torque Motor, Padded Cylinder Head and much much more, the best just got even better.

If you're in search of an LMG for milsim skirmishes or you're a real stickler for the details, you need the Cybergun T8 SP Systems FN Herstal MK46 MOD 0 LMG AEG! Patterned after the real steel MK46 MOD 0, the special forces optimised variant of the legendary M249/Minimi, this is a proper MK46 replica; constructed with a steel receiver, stamped FN Herstal markings licenced by Cybergun and no M4 mag feeding capability, just like the real thing. 

M4 mag compatibility was removed from the real steel MK46 to reduce weight and is correctly replicated in the Cybergun MK46, though even with the weight reduction, it is a hefty beast! This is due to its plethora of steel externals, including the lower receiver, flash hider, stock base, dust cover, rear sight and trim. The other externals are made from strong alloy, with a superb quality high density polymer stock and pistol grip and a CNC aluminium 20mm Picatinny railed handguard. Make no mistake, this is probably the best built MK46 replica out there currently!

Inside, we have a CA M4249 style gearbox, a significantly reinforced design well suited to sustained fire. The internals include 18:1 ratio CNC steel gears running on 8mm ball bearing bushings, a polymer piston with a full steel tooth rack and a high torque motor. The gearbox shell is cut to allow for a quick change spring system, making power tuning a piece of cake compared to conventional gearboxes. 

To provide improved long range accuracy and a boost in air-efficiency, a 6.03mm tightbore inner barrel is also fitted along with an alloy rotary HOP-up and a T8 purple HOP-up bucking; a decent step up from the usual stock components. If you're after a modern LMG which is built to bomb proof standards and shoots well as a bonus, the Cybergun T8 SP Systems FN Herstal MK46 MOD 0 LMG AEG is ideal!

If you want a game-changer of a CQB platform, the Bolster Tuned EMG Daniel Defense DDM4® PDW Upgraded AEG is exactly that. Based on the already impressive EMG Daniel Defense DDM4® PDW SBR AEG, this officially licenced replica has been treated to internal tuning and upgrades by Bolster Armouries.

On the outside, the DDM4 PDW is rocking a DD linear compensator, MFR XL M-LOK handguard, Daniel Defense marked receiver complete with .300BLK calibre markings and a compact PDW sliding stock. As part of the Bolster Tuned upgrade process, the original pistol grip has been swapped out for the popular PTS Syndicate EPG pistol grip, offering the improved strength of Dupont Zytel polymer and a motor engagement angle more suitable for high-speed builds.

Inside, you'll find a Gate ASTER MOSFET paired with the Gate QUANTUM CNC trigger, offering over 470 trigger sensitivity adjustment options along with the usual advanced ASTER features. The standard ball bearing bushings have been swapped out for Bolster Armouries EZO Bearings for a longer lifespan, an FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding at insane rates of fire and the Warhead 27K Base Brushless Motor provides the speed this little PDW needs to shred anything else you may encounter in CQB.

If you've been searching for a real beast of a CQB platform with a cutting-edge aesthetic and performance to rival the best, the Bolster Tuned EMG Daniel Defense DDM4® PDW is the one. Hitting out to an impressive 60m with G&G 0.28g BBs with an astonishing rate of fire of 25RPS on an 11.1V battery, this bite-sized AR packs a full-sized punch!