- CNC 6000 Series Aluminium
- Super lightweight - Ideal for GBB Pistols
- It's TINY - Pay close attention to dimensions!
If you're after a suppressor which won't slow your GBB pistol's cyclic rate, the PTS Syndicate Dead Air Mask Mock Suppressor is the one to go for! Uniquely lightweight and compact, the Mask mock suppressor replicates the real steel Dead Air Mask, complete with precisely engraved, licensed trademarks and a flawless form which matches the real thing perfectly.
The Mask mounts to 14mm CCW male barrel threads or 14mm CCW pistol thread adapters and is packaged with a small barrel extension piece, which provides an offset to avoid the suppressor making contact with the frame or guide rod of your pistol. While it is designed for pistols, the 14mm CCW threading means the Mask can be fitted to the vast majority of Airsoft rifles and SMGs, though make sure you pay attention to dimensions, as it is rather small!
Inside, the Mask is foam-filled, which should alter muzzle report slightly, making you harder to locate in a hectic CQB environment. If you're going for a sneaky sidearm and need a suppressor to suit, you can't ask for better than the PTS Syndicate Dead Air Mask Mock Suppressor!
- CNC Aluminium build
- Fits 24mm CW male threading
- For PTS Dead Air Wolverine Suppressor
If you're eyeing up the PTS Syndicate Dead Air Wolverine Suppressor but your AK has 24mm CW barrel threads, this is the adapter you need! Made from CNC-machined aluminium to the high standards we expect from PTS Syndicate, the 24mm Thread Adaptor for Dead Air Wolverine Suppressor replaces the standard 14mm CCW rear cap of the Wolverine, allowing it to mount to 24mm CW male threading.
- CNC Aluminium & steel
- For PTS Dead Air Wolverine Suppressor
- Mounts to Dead Air Keymo muzzle devices
If your primary is rocking a PTS Dead Air Keymo muzzle device and you want to add some Ruskie styling, this adapter will do the trick! The PTS Keymo QD Adaptor for Dead Air Wolverine Suppressor replaces the standard 14mm CCW threaded rear cap of the Wolverine with a Keymo QD interface, allowing it to mount to any PTS Dead Air Keymo muzzle device and be removed in seconds.
- CNC Aluminium construction
- Internal baffles to reduce noise
- Mounts to 14mm CCW male threads
If you're looking for a suppressor with the retro Russian look but packed with modern features, the PTS Syndicate Dead Air Wolverine Mock Suppressor belongs on your build! This replica silencer is based on the real steel Dead Air Wolverine, a modern suppressor design inspired by the real steel PBS-1 suppressor of the Soviet era. By default, the Wolverine mounts to 14mm CCW male barrel threading present on the vast majority of Airsoft rifles, but its design means you have more options than just that!
The Wolverine keeps the utilitarian aesthetic of the original PBS-1 but adds modularity into the mix in the form of interchangeable front apertures and a modular collar capable of being adapted with aftermarket parts to mount to either 24mm CW Russian threading or Dead Air Keymo muzzle devices. Inside, we are treated to polymer baffles to reduce noise, and just like the Sandman series, these baffles are very effective with HPA and gas-powered platforms. If you're mimicking a modern real steel tactical AK build or you want a PBS-1-style suppressor which doesn't weigh a ton, the PTS Dead Air Wolverine Mock Suppressor is a fine choice!
- CNC Aluminium construction
- Tracer module inside - Light 'em up!
- Mounts to 14mm CCW male threads
If you're looking for a tracer suppressor with the retro Russian look but packed with modern features, the PTS Syndicate Dead Air Wolverine Tracer Unit is one of the best options out there! This replica silencer is based on the real steel Dead Air Wolverine, a modern suppressor design inspired by the real steel PBS-1 suppressor of the Soviet era. By default, the Wolverine mounts to 14mm CCW male barrel threading present on the vast majority of Airsoft rifles, but its design means you have more options than just that!
The Wolverine keeps the utilitarian aesthetic of the original PBS-1 but adds modularity into the mix in the form of interchangeable front apertures and a modular collar capable of being adapted with aftermarket parts to mount to either 24mm CW Russian threading or Dead Air Keymo muzzle devices.
Inside, we are treated to a tracer module, ideal for adding an instinct aiming advantage in low-light environments. If you're mimicking a modern real steel tactical AK build or you want a PBS-1-style tracer unit which doesn't weigh a ton, the PTS Dead Air Wolverine Tracer Unit is the finishing touch your build needs!
- Flash Hider Included
- Quick detach interface
- Machine fluted surface
The all-new Dead Air suppressor range from PTS is here! An excellent suppressor with a true baffle system to give actual sound dampening to your platform. the new Dead Air is perfect for the Airsofter who's after adding that little bit of "designer touch" to their setup.
- Flash Hider Included
- Quick detach interface
- Machine fluted surface
The all-new Dead Air suppressor range from PTS is here! An excellent suppressor with a true baffle system to give actual sound dampening to your platform. the new Dead Air is perfect for the Airsofter who's after adding that little bit of "designer touch" to their setup.
- Flash Hider Included
- Quick detach interface
- Machine fluted surface
The all-new Dead Air suppressor range from PTS is here! An excellent suppressor with a true baffle system to give actual sound dampening to your platform. The new Dead Air is perfect for the Airsofter who's after adding that little bit of "designer touch" to their setup.
- 4 front LEDs for flash effect
- 35RPS Consistency
- 14mm CCW Flash Hider
A 14mm CCW-compatible tracer unit that will illuminate your BBs as they leave the barrel, making it much easier to identify hits, and teammate locations, run infection-themed skirmishes, and generally light up the dark with bio-luminescence.
- 4 front LEDs for flash effect
- 35RPS Consistency
- 14mm CCW Flash Hider
A 14mm CCW-compatible tracer unit that will illuminate your BBs as they leave the barrel, making it much easier to identify hits, and teammate locations, run infection-themed skirmishes, and generally light up the dark with bio-luminescence.
- 4 front LEDs for flash effect
- 35RPS Consistency
- 14mm CCW Flash Hider
A 14mm CCW-compatible tracer unit that will illuminate your BBs as they leave the barrel, making it much easier to identify hits, and teammate locations, run infection-themed skirmishes, and generally light up the dark with bio-luminescence.
- 4 front LEDs for flash effect
- 35RPS Consistency
- 14mm CCW Flash Hider
A 14mm CCW-compatible tracer unit that will illuminate your BBs as they leave the barrel, making it much easier to identify hits, and teammate locations, run infection-themed skirmishes, and generally light up the dark with bio-luminescence.
- Steel construction
- KeyMo QD suppressor compatibility
- For 14mm CCW male threaded barrels
If you're working on an SBR build with a Sandman suppressor, the PTS Syndicate Dead Air KeyMicro Flash Hider is the perfect finishing touch! This steel flash hider replicates the real Dead Air KeyMicro Flash Hider, the shortened variant of the full-size KeyMo Flash hider. Like its longer relative, the KeyMicro Flash Hider is compatible with PTS Dead Air Sandman QD suppressors and mounts to 14mm CCW male threads but its squat, aggressive styling makes it very well suited to modern SBR builds.
Whether you're running a PTS Sandman suppressor or not, this uniquely styled tri-prong flash hider will give your build an elite yet discrete front-end accent with the pre-requisite top-tier PTS Syndicate build quality and official licencing from Dead Air Silencers!
- Steel construction
- KeyMo QD suppressor compatibility
- For 14mm CCW male threaded barrels
If you're running a compact platform with a PTS Dead Air Sandman suppressor, your build is begging for the PTS Syndicate Dead Air KeyMicro Brake! This muzzle brake is constructed from steel and compatible with 14mm CCW male barrel threads, offering a uniquely aggressive shortened design with KeyMo suppressor compatibility. This means you can mount PTS Dead Air Sandman-S, Sandman or Sandman-K suppressors quickly and easily, along with any as-yet unreleased KeyMo interface suppressors from PTS.
Being licenced by Dead Air Silencers means the KeyMicro is as close to the real thing as you can get, with flawless machining throughout and a unique, modern design. Whether you're running a Sandman suppressor or not, the Dead Air KeyMicro Brake from PTS Syndicate is the perfect finishing touch to any SBR build!
- 6000 Series aluminium
- Tracer module inside
- 14mm CCW KeyMo QD Flash hider
If you're working on a DMR build or otherwise lengthy platform, the PTS Syndicate Dead Air Sandman-L Tracer version is what you need to top it off! A detailed, licensed replica of the real steel Dead Air Sandman-L, this mock suppressor is pre-fitted with a muzzle flash tracer module and is licensed by Dead Air Silencers. This, of course, means licensed trademarks across the design, ideal for builds which prioritise realism!
Designed to mount to the KeyMo QD interface present on the included steel flash hider (or other PTS KeyMo muzzle devices), the Sandman-L is quick to attach and remove, allowing you to set up in seconds for the scenario ahead and never be fixed to one configuration. The internal tracer module is powered by a rechargeable battery and recharged via a USB Type-C cable, making it convenient and economical to run compared to older tracer designs which use disposable alkaline batteries.
The Sandman-L is the longest of the Sandman suppressor line, ideal for DMRs and other long platforms seeking the stealthy aesthetic. If you're working on an ultra-modern build and need a suppressor which makes others feel inadequate, the PTS Syndicate Dead Air Sandman-L Tracer version will do just that!
- 6000 Series aluminium
- Tracer module inside
- 14mm CCW KeyMo QD Flash hider
If you're working on a DMR build or otherwise lengthy platform, the PTS Syndicate Dead Air Sandman-L Tracer version is what you need to top it off! A detailed, licensed replica of the real steel Dead Air Sandman-L, this mock suppressor is pre-fitted with a muzzle flash tracer module and is licensed by Dead Air Silencers. This, of course, means licensed trademarks across the design, ideal for builds which prioritise realism!
Designed to mount to the KeyMo QD interface present on the included steel flash hider (or other PTS KeyMo muzzle devices), the Sandman-L is quick to attach and remove, allowing you to set up in seconds for the scenario ahead and never be fixed to one configuration. The internal tracer module is powered by a rechargeable battery and recharged via a USB Type-C cable, making it convenient and economical to run compared to older tracer designs which use disposable alkaline batteries.
The Sandman-L is the longest of the Sandman suppressor line, ideal for DMRs and other long platforms seeking the stealthy aesthetic. If you're working on an ultra-modern build and need a suppressor which makes others feel inadequate, the PTS Syndicate Dead Air Sandman-L Tracer version will do just that!
- Aluminium construction
- For PTS Sandman suppressors
- Flash hider front cap
If you want a more aggressive look for your PTS Sandman suppressor, the PTS Syndicate Dead Air R-Series Flash Hider Front Cap for Sandman Suppressors will give you what you need. This front cap replaces the original cap on any of PTS's Dead Air Sandman suppressors with a fantastic replica of the real steel Dead Air Flash Hider Front Cap. In real steel terms, this reduces muzzle flash signature but in Airsoft terms, it's only for the look!