Delta Armory Airsoft

If you don't like to waste energy lugging a full metal platform around but want high performance, pre-upgraded internals, the Delta Armory CHARLIE™ ETU range was conceived with you in mind. This is the DA-C04-ETU M4/AR-15 KeyMod AEG, based externally on the original DA-C04 but kitted out internally with Delta's APLHA™ ETU internals. 

Inside, we are treated to 16:1 ratio CNC steel gears, CNC aluminium cylinder group parts, a 6.03mm tightbore inner barrel with a high torque Neodymium magnet motor to top it off. The Delta Armory programmable ETU/MOSFET system is also present, offering super snappy trigger response, improved rate of fire and the ability to program the fire controls for burst mode and binary trigger. Whether you're new to skirmishing and want a pre-upgraded platform that can tangle with the best, or you're a veteran who likes to fight easy, the DA-C04-ETU CHARLIE™ M4/AR-15 KeyMod AEG is the ideal addition to your Airsoft armoury!

If you're looking for high-grade tracer BBs, the Delta Armory 0.25g Diamond 6mm Tracer BBs are the right tool for the job. Supplied in a resealable bag of 4000, Delta's Diamond BBs are high-grade polished 6mm BBs with tight tolerances to ensure reliable feeding and maximum accuracy potential. These are the tracer versions and will glow brightly when shot through an Airsoft gun with a tracer unit, adding an instinct aiming and psychological warfare advantage, especially up close!

If you want to start your Airsoft journey with something that shoots a little better than the usual beginner platform, this bundle is ideal. The Silent OPS CQB Bundle is based around the pre-upgraded DA-B03-ETU with its integral suppressor, hybrid aluminium/high-density polymer build and programmable fire controls including burst mode, pre-cocking and binary trigger. 

We paired the DA-B03-ETU with 2 spare mags and a speed loader so you can keep it topped up, a Red Dot Sight for fast target acquisition (lens protector recommended) and a LiPo battery, charger and charging bag to keep it fueled up.

This setup would be ideal for a sneaky CQB specialist or an aggressive outdoors skirmisher who wants to start with the edge over other newcomers. The DA-B03-ETU is a cut above standard beginner AEGs thanks to its electronic trigger unit which gives it a frightening semi-auto trigger response and killer rate of fire!

If you're after an MK18 and a full complement of accessories, this is what you need! The Delta Armory MK18 BRAVO™ Binary Bundle pairs the Delta Armory DA-B15-ETU MK18 with 2 extra magazines, a red dot sight (lens protector recommended), BBs, a speed loader, LiPo battery, charger, and a battery charging bag, giving you everything you need to get going with a slick Military style setup!

This bundle is named for the Binary Trigger function of the pre-installed ETU system inside the MK18, though it can also provide burst mode and pre-cocking for a faster trigger response. If you do a mix of indoor and outdoor skirmishing, this setup will see you well-equipped!

If you're looking for a rock-solid DMR base gun with real-world foundations and pre-upgraded internals, check out the Delta Armory PROARMS® PAR MK3 16". This full metal M4/AR-15 AEG platform is based on the real PROARMS PAR MK3, a cutting-edge AR-15 platform which simply cannot be built from Airsoft aftermarket parts. 

Like the real thing, the majority of the Delta PAR externals are constructed from CNC 6063 aluminium, sidestepping the usual Airsoft alloy for a stronger, more long-lasting external build. As we might expect, the machining quality is absolutely flawless, as are the authentic licenced PROARMS trademarks precisely engraved on each side of the modernised receiver. 

At the heart of the PAR MK3, we are treated to Delta Armory ALPHA ETU series internals, meaning reinforced SHS parts sit side by side with a CNC aluminium piston head and cylinder head and a CNC steel spring guide and cylinder, powered by a high torque Neodymium magnet motor and kept in check by the Delta Armory programmable ETU/MOSFET system. Whether you build it out into a high FPS DMR or keep it stock, the Delta Armory PROARMS® PAR MK3 16" will be an asset to any long-range objective!

If you're looking for a sub-compact AR AEG on a tight budget, the Delta Armory DA-B03 BRAVO™ SilentOps CQB M4/AR-15 AEG is probably the best option out there currently! This Delta Armory BRAVO™ series AEG boasts an aluminium micro suppressor and CNC aluminium quad-railed handguard along with Delta's unique receiver constructed from high-density polymer and the superb Delta Armory battery stock. 

Inside, the DA-B03 is very well equipped for the price, boasting a 6.03mm tightbore inner barrel, rotary HOP-up unit and a reinforced version 2 gearbox equipped with a quick change spring guide, 7mm ball bearing bushings and an SHS piston and tappet plate. All of the internals are Tokyo Marui version 2 gearbox spec and compatible with aftermarket upgrades, meaning you can push the performance up even further down the line if you feel the need. 

Rivalling the most affordable AEGs on the market when it comes to price but far better equipped internally, the Delta Armory DA-B03 BRAVO™ SilentOps CQB M4/AR-15 AEG is a fantastic choice for newcomers, either for CQB or fast-moving players who value an equally agile platform!

If you like your M4 AEGs simple and effective, the Delta Armory DA-B01 BRAVO™ CQB-R M4/AR-15 AEG should be right up your street! Based on the real steel M4A1 in CQB-R configuration, this M4/AR-15 AEG is rocking a 10.5-inch outer barrel, putting it in that sweet spot, with enough barrel length to handle long-range threats while not being too long for close-quarters combat. 

The DA-B01 BRAVO™ CQB-R M4/AR-15 AEG is constructed with strong high-density polymer receivers and an aluminium handguard, making it perfect for those who want to step a bit closer to realism while maintaining maximum energy and agility in game. Inside, we are treated to rock solid, pre-upgraded internals featuring a quick change spring guide, 7mm ball bearing bushings and an SHS piston and tappet plate. The inner barrel is a 6.03mm tightbore paired with a rotary HOP-up unit, giving you the most modern HOP-up unit style for the M4 AEG platform with superb accuracy potential when adjusted. 

If you're fresh to the game and want to start with something a cut above the bare-bones beginner AEG with almost unlimited aftermarket compatibility and the ability to style it up to the nines, the Delta Armory DA-B01 BRAVO™ CQB-R M4/AR-15 AEG is ideal for you!

If you like your M4 AEGs simple and effective, the Delta Armory DA-B01 BRAVO™ CQB-R M4/AR-15 AEG should be right up your street! Based on the real steel M4A1 in CQB-R configuration, this M4/AR-15 AEG is rocking a 10.5-inch outer barrel, putting it in that sweet spot, with enough barrel length to handle long-range threats while not being too long for close-quarters combat. 

The DA-B01 BRAVO™ CQB-R M4/AR-15 AEG is constructed with strong high-density polymer receivers and an aluminium handguard, making it perfect for those who want to step a bit closer to realism while maintaining maximum energy and agility in game. Inside, we are treated to rock solid, pre-upgraded internals featuring a quick change spring guide, 7mm ball bearing bushings and an SHS piston and tappet plate. The inner barrel is a 6.03mm tightbore paired with a rotary HOP-up unit, giving you the most modern HOP-up unit style for the M4 AEG platform with superb accuracy potential when adjusted. 

If you're fresh to the game and want to start with something a cut above the bare-bones beginner AEG with almost unlimited aftermarket compatibility and the ability to style it up to the nines, the Delta Armory DA-B01 BRAVO™ CQB-R M4/AR-15 AEG is ideal for you!

If you love the looks of the DA-C05 Silent Ops but wish it was longer with more metal parts, the Delta Armory DA-B08 BRAVO™ 9" SilentOps M4/AR-15 AEG is just what you need! BRAVO™ AEGs are constructed with strong high-density polymer receivers and aluminium handguards, making them perfect for those who want to step a bit closer to realism while maintaining maximum energy and agility in game. 

The Silent Ops 9" is rocking a quad rail handguard styled after the KAC Freefloat RIS paired with a suppressor hidden beneath, giving it the stealthy styling of shorter suppressed ARs with enough length to hide a 400mm 6.03mm tightbore inner barrel inside for maximum long range effect. The tightbore is paired with a rotary HOP-up unit and a reinforced version 2 gearbox equipped with a quick change spring guide, 7mm ball bearing bushings and an SHS piston and tappet plate, resulting in a build focussed on reliability and strength with a slight accuracy advantage for good measure!

Whether you're looking for a DMR base gun or a long-barreled AR platform which won't weigh you down, the Delta Armory DA-B08 BRAVO™ 9" SilentOps M4/AR-15 AEG will suit your needs perfectly!

If you're in search of a new CQB platform or a compact PDW-style AR for your quick and slick playstyle, the Delta Armory DA-A03 ALPHA™ SilentOps CQB M4/AR-15 AEG should be high on your list of options. This full-metal M4 platform boasts an extremely compact front end, ideal for close-quarters skirmishes or woodland warriors who prefer to move fast with a bite-sized M4 with full-sized firepower. 

Being an AEG of the ALPHA™ range, this beast boasts pre-upgraded internals and a high-quality metal receiver paired with a  CNC aluminium handguard and micro suppressor. Inside, you will find a reinforced V2 gearbox shell, SHS piston with a full steel tooth rack, a quick change ball bearing spring guide and a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit for impressive long-range effectiveness despite its short overall length. 

If your aim is to refute the "size matters" philosophy and prove it truly is how you use it, the Delta Armory DA-A03 ALPHA™ SilentOps CQB M4/AR-15 AEG is the perfect AEG to do it!

If you're new to Airsoft and want to start with something a bit more advanced than the average M4, the Delta Armory DA-C02-ETU CHARLIE™ M4/AR-15 CQBR AEG should suit your needs! This M4 CQBR AEG is constructed primarily from high-density polymer, just like the original DA-C02, but unlike the original, this version is rocking the ALPHA™ ETU series internals, flawlessly marrying a lightweight and agile build with a lightening fast trigger response and the ability to program the trigger for binary trigger or burst mode. 

The ETU isn't the only thing added to the DA-C02-ETU; we are also treated to 16:1 ratio CNC steel gears, CNC aluminium cylinder group parts, a 6.03mm tightbore inner barrel with a high torque Neodymium magnet motor to top it off. The result is a surprising trigger response and intense rate of fire, usually reserved for AEGs twice this price! If you want all of the performance but none of the weight of the Delta Armory ALPHA ETU series, the DA-C02-ETU CHARLIE™ M4/AR-15 CQBR AEG provides exactly that!

If you're in search of an M-LOK-equipped AR AEG packed with pre-upgraded parts, the Delta Armory DA-B13-ETU BRAVO™ M4/AR-15 M-LOK AEG is one to watch. Like Delta's other BRAVO™ like offerings, the DA-B13-ETU boasts a CNC aluminium handguard and high density polymer receiver, giving you a great combination of realism and low weight. The handguard is rocking M-LOK slots at the 3, 6 & 9 o'clock positions and a 20mm Picatinny rail up top, ready for whatever accessories you need to complete your mission. 

Delta's ETU AEGs are even more upgraded than the standard BRAVO™ line, boasting a pre-installed programmable ETU/MOSFET, a high torque motor, CNC steel 16:1 gears and CNC aluminium piston and cylinder heads. These pre-upgraded internals give the DA-B13-ETU a super snappy trigger response and raised rate of fire from the combination of improved efficiency via the ETU and faster mechanical cycling via the high-speed gearset. 

If you need a handy platform with beastly internals at the perfect length for aggressive, fast-moving playstyles, the DA-B13-ETU from Delta Armory will be an asset to your game!

If you're looking for a modernised full metal M4A1, the DA-A02-ETU ALPHA™ M4A1 RAS AEG from Delta Armory is exactly that. This ALPHA™ line AEG boasts Delta Armory's best internals yet, featuring reinforced internal parts from SHS, CNC aluminium cylinder group parts, CNC machined 16:1 steel gears and a high torque motor, backed up by the Delta Armory programmable MOSFET/ETU system. The Delta ETU offers the option for burst mode, binary trigger and pre-cocking, all of which can be programmed in using the fire controls of the AEG itself. 

On the outside Delta has added a gunfighter mod.3 style pistol grip, a slimline crane-style stock and an enhanced receiver, complete with gripping texture on the magazine well and a built-in enlarged trigger guard. This gives the now old-school M4A1 a bit of a refresh without ruining its iconic outline and maintaining suitability for both casual and Milsim skirmishes. If you love the M4A1 silhouette but want more modern ergonomics, the Delta Armory DA-A02-ETU ALPHA™ M4A1 RAS AEG is ideal!

If you have the itch for a new AR but you want something rare, the Delta Armory PROARMS® PAR MK3 AEG is exactly that. Based on the real steel PROARMS® PAR MK3, this full-metal AEG is constructed with a CNC 6063 aluminium receiver and handguard and is equipped internally with the same fantastic pre-upgraded parts as the Delta Armory ALPHA ETU series. 

This means we are treated to a 6.03mm tightbore inner barrel, rotary HOP-up unit, SHS piston and tappet plate, a high torque motor and the Delta Armory programmable ETU, allowing for burst mode, binary trigger and precocking to be programmed in using the fire controls of the AEG itself. If you're looking for a lesser-seen design with AR compatibility, pre-upgraded internals and build quality that is a cut above the usual full metal M4, the Delta Armory PROARMS® PAR MK3 10" is one to watch!

If you're looking at high-end AR options and you want something rare, the Delta Armory PROARMS® PAR MK3 14.5" M4/AR-15 AEG is worthy of your scrutiny! This cutting-edge modern AR design boasts more than its fair share of perks when compared to other M4/AR-15 platforms, most notably its CNC aluminium receiver and handguard, mimicking the real PAR with its angled receiver surfaces and super-modern look perfectly. If you can call any AR-15-derived rifle unique, it's this one!

On the inside, we are treated to Delta Armory ALPHA ETU internals, featuring SHS reinforced parts, a CNC steel spring guide and cylinder, a CNC aluminium piston head and cylinder head and a mighty high torque Neodymium magnet motor, backed up by the advanced Delta Armory ETU/MOSFET. If a rarely-seen AR with top-notch performance is what you need to expand your arsenal, the Delta Armory PAR MK3 is the right call!

If you appreciate a well-built, unique AR platform bristling with pre-upgraded parts, the Delta Armory DA-PAR-12 PROARMS® PAR MK3 12" fits the bill. This uniquely styled AR platform is built like a tank, boasting a CNC 6063 aluminium handguard and receiver with immaculate licenced PROARMS trademarks and the uniquely modern PROARMS receiver design. 

The fun doesn't end on the outside, either. Internally, we are treated to the top of the line when it comes to Delta Armory internals, including a high torque motor, 6.03mm tightbore inner barrel, SHS piston and tappet plate combo and CNC aluminium cylinder group parts. 

The cream of the crop is the Delta Armory ETU/MOSFET system which offers programmable fire controls including burst mode, binary trigger and adjustable pre-cocking along with protecting from power surges and warning you when your battery's voltage drops too low. For an advanced exterior and equally advanced internals, the Delta Armory PROARMS® PAR MK3 12" is what you need!

If you need affordable Mid-cap magazines for your M4/AR-15 AEG you're going to want to check this out! The Delta Armory 120rnd DMAG Mid-cap Magazine is designed to fit M4/AR-15 AEGs and is styled after a well-known polymer real steel magazine, complete with waffle-style gripping texture.

The magazine is loaded just like any other Airsoft mid-cap, through the fill/feed port at the top of the magazine body using a speed loader or loading tool. The magazine is also marked on either side with the capacity (120) and the Delta Armory logo. If you need cheap M4 mags to complete your loadout, this is as cheap as they come!

If you have mid-caps to load, you'll need one of these! The Delta Armory 100rnd Magazine Speed Loader is a thumb plunger type speed loader constructed from translucent polymer which holds 100 BBs approximately. The loader is filled via its fill window at the top and the thumb plunger can be deployed and stowed via the button on the side. 

To load an Airsoft mid-cap or low-cap, simply fill your speed loader, align the fill/feed port of the magazine with the aperture on the bottom of the loader, hold the mag and loader together and push the thumb plunger repeatedly until it becomes firm. Your mag is now filled. If you run mid-caps, low-caps or you like to use multiple weights of BB, speed loaders are essential Airsoft kit!

If you're looking for a lightweight, affordable AEG platform, whether this is your first AEG or another for the arsenal, the DA-C07 CHARLIE™ from Delta Armory is one of the best options out there. Constructed from strong high density polymer for a lightweight and agile build with an alloy outer barrel to add strength where needed, this is the stealthy styled option from the Delta Armory CHARLIE™ line, known as the "KeyMod Predator".

The DA-C07 comes kitted out with an aluminium micro suppressor, a KeyMod-style handguard with removable proprietary 20mm rail sections, a 20mm railed receiver ready for a red dot sight or scope, an ergonomic pistol grip styled after one of the most modern real steel AR grips and the unique Delta Armory battery stock with a generously sized battery compartment and built-in QD sling sockets.

Inside, it gets even better! The reinforced version 2 gearbox boasts a quick change spring guide, an SHS piston and tappet plate, 7mm bushings and a steel 18:1 gearset. To add some accuracy and range into the mix, the DA-C07 boasts a 6.03mm tightbore inner barrel and rotary HOP-up unit, giving you some of the best internal options pre-installed. If you were holding back on buying an affordable AEG because you're worried it can't compete, the DA-C07 will surprise you!

If you're in search of an affordable red dot sight with the iconic open reflex look and more than its fair share of functions, the Delta Armory Multi-Reticle Open Reflex Red Dot Sight is one to watch. Constructed from aluminium with an integral 20mm Picatinny rail mount, this red dot sight is powered by a CR2032 button cell with the choice of red or green reticle illumination in 5 brightness levels.  

Your choice of reticle can be selected via the dial on the rear of the sight, offering a simple dot, ringed dot, cross or ringed cross reticle, perfect for any environment or preference. With an integral mount, all the reticle options one could ever need along with full adjustment when it comes to zero, reticle colour and brightness, the Delta Armory Multi-Reticle Open Reflex Red Dot Sight is an impressive bit of kit for an equally impressive price!

Those in search of a modern AR with a long range leaning, check this out! The DA-A15-ETU ALPHA™ 13" M-LOK M4/AR-15 from Delta Armory brings the cutting-edge styling of the slickest real steel M4s out there along with pre-upgraded internals pushed to the max, making it a serious foe to face down with in an outdoors environment. 

As with the other ALPHA™ line AEGs from Delta, the DA-A15-ETU boasts full metal construction with flawless machining throughout, but unlike standard ALPHA™ AEGs, this one is the ETU version. Delta's ETU AEGs are even more upgraded than the standard ALPHA™ line, boasting a pre-installed programmable ETU/MOSFET, a high torque motor, CNC steel 16:1 gears and CNC aluminium piston and cylinder heads. Whether you are going full DMR with this build or using it as it comes, you are very well equipped for long range warfare with the DA-A15-ETU!

If you're checking out alternative stock options for your M4/AR-15 AEG, the Delta Armory M4/AR-15 Battery Stock & Buffer Tube Set should be on your radar. This stock is the same offered on Krytac Trident and Delta Armory AEGs, boasting QD sling sockets on each side, a conventional sling loop in the centre and a comfortable and grippy rubber butt plate for traction in all weather conditions. 

Like the "Crane" stock, the Delta Armory battery stock has a comfortable sloped cheekpiece, but unlike the Crane, the Delta stock has texture along the top for comfort and grip, encouraging a consistent head position when shooting. The highlight of this stock design is its enlarged battery compartment, offering longer battery tubes than the Crane and more space around the sides, allowing for larger LiPo batteries to be installed. If you want a longer-lasting battery and your AR AEG has a buffer tube, this is the stock for you!

If you're searching for a super flexible M4/AR-15 AEG with an ultra-modern aesthetic, the Delta Armory R15 FREYA™ 13" M4/AR-15 AEG should suit you perfectly. Boasting a full metal build on the outside and pre-upgraded internals inside, the FREYA's party trick is the new Delta Armory EAGLE ETU, offering more programmable functions than previous versions and allowing you to run the FREYA™ as a DMR with semi-auto only and a stronger spring and quickly swap the spring and fire control options for a CQB skirmish the next day. 

Inside, we are treated the new Delta Armory EAGLE programmable ETU/MOSFET, offering even more programmable functions than the original Delta ETU. The EAGLE allows for 3 or 5-round burst mode, binary trigger, sniper delay, AUG mode, semi-auto only and precocking to be programmed in using the fire controls of the AEG itself. If you're looking for a lesser-seen design with AR compatibility, the R15 FREYA™ 13" M4/AR-15 AEG from Delta Armory is a fantastic option with more than its fair share of perks!

If you're searching for a super flexible M4/AR-15 AEG with an ultra-modern aesthetic, the Delta Armory R15 FREYA™ 13" M4/AR-15 AEG should suit you perfectly. Boasting a full metal build on the outside and pre-upgraded internals inside, the FREYA's party trick is the new Delta Armory EAGLE ETU, offering more programmable functions than previous versions and allowing you to run the FREYA™ as a DMR with semi-auto only and a stronger spring and quickly swap the spring and fire control options for a CQB skirmish the next day. 

Inside, we are treated the new Delta Armory EAGLE programmable ETU/MOSFET, offering even more programmable functions than the original Delta ETU. The EAGLE allows for 3 or 5-round burst mode, binary trigger, sniper delay, AUG mode, semi-auto only and precocking to be programmed in using the fire controls of the AEG itself. If you're looking for a lesser-seen design with AR compatibility, the R15 FREYA™ 13" M4/AR-15 AEG from Delta Armory is a fantastic option with more than its fair share of perks!

If you're searching for a super flexible M4/AR-15 AEG with an ultra-modern aesthetic, the Delta Armory R15 FREYA™ 13" M4/AR-15 AEG should suit you perfectly. Boasting a full metal build on the outside and pre-upgraded internals inside, the FREYA's party trick is the new Delta Armory EAGLE ETU, offering more programmable functions than previous versions and allowing you to run the FREYA™ as a DMR with semi-auto only and a stronger spring and quickly swap the spring and fire control options for a CQB skirmish the next day. 

Inside, we are treated the new Delta Armory EAGLE programmable ETU/MOSFET, offering even more programmable functions than the original Delta ETU. The EAGLE allows for 3 or 5-round burst mode, binary trigger, sniper delay, AUG mode, semi-auto only and precocking to be programmed in using the fire controls of the AEG itself. If you're looking for a lesser-seen design with AR compatibility, the R15 FREYA™ 13" M4/AR-15 AEG from Delta Armory is a fantastic option with more than its fair share of perks!

If you prefer your scopes compact without functionality compromises, the Delta Armory 3-9x40 Illuminated Short Rifle Scope should be right up your street. This variable magnification rifle scope measures less than 20cm in overall length, making it ideal for platforms with less rail space needing a long-range optic. 

Offering adjustable 3-9x magnification, red or green reticle illumination with 5 brightness levels and adjustable windage, elevation and focus, this short rifle scope doesn't compromise when it comes to features and even comes packaged with scope rings and a CR2032 battery so you can mount it and get shooting straight away. If you have the "size doesn't matter, it's how you use it" mantra when it comes to optics, this is the ideal scope for you!

If you are keeping your eye out for a base for your dream DMR build and have a certain sneaky playstyle, the DA-A10 ALPHA™ Silent Ops DMR should fit you like a glove. This M4/AR-15 platform is part of Delta Armory's ALPHA™ line, top of the range when it comes to externals and boasting more than its fair share of pre-upgraded internal parts as a bonus!

Inside, you will find a reinforced V2 gearbox shell, SHS piston with a full steel tooth rack, a quick change ball bearing spring guide and a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit for impressive long-range effectiveness. The quick change spring makes for a relatively easy DMR upgrade, meaning if you want the DA-A10 to live up to its name you'll have a much easier time of it! 

Whether you want a stealthily styled AR platform for mid to long range engagements or you're working on a suppressed DMR build, the DA-A10 ALPHA™ Silent Ops DMR already has the aesthetic and the upgraded internals; all it needs is pointing in the right direction!

If you need a bit more height on your optic for a clear view with full face protection, the Delta Armory 3-Slot 20mm Picatinny Riser Mount for Red Dot Sights will do the trick. This riser mount provides a 3-slot 20mm Picatinny rail approximately 1 inch (25mm) above the surface of the rail it is mounted to, raising the optic to M4/AR-15 height over bore. This means it will align perfectly with an M4/AR-15 front sight post and most flip-up iron sights; ideal for those who like to "co-witness" their optic and irons. 

If you find you have to bend your neck to get a good view down your red dot sight, a riser is what you need. This riser can be mounted to any 20mm Picatinny railed receiver and is ideal for small "micro red dot sights" like the T1/2 and Docter/RMR style red dot sights due to its compact size.

If you've misplaced your Crane stock's butt plate, here you go! The Delta Armory Butt Plate for Crane M4/AR-15 Battery Stock is a replacement original part and should fit the vast majority of Airsoft Crane stocks, particularly those from Delta Armory, Specna Arms and Lancer Tactical. The butt plate is constructed in two parts; with the base being high density polymer and the outer coating being grippy rubber with lattice texture on its surface.

As mentioned, this should fit almost any Airsoft Crane stock out there but we haven't tested them all, so proceed with caution and remember we cannot accept returns on any butt plate that has been modified.

If you're looking for a medium-range optic with the option to zoom out and handle targets at short range, the Delta Armory 1-4X24RG LPVO Rifle Scope does exactly that. This magnified riflescope is an LPVO (Low Power Variable Optic), meaning it offers variable magnification from 1x up to 4x, ideal for short and medium-range engagements mounted on an assault rifle, DMR or sniper rifle. 

The 1-4X24RG offers windage and elevation adjustment via a pair of capped turrets, along with a choice of red or green reticle illumination in 5 brightness settings and a fast focus dial at the rear of the eyebell so you can get a clear view at different engagement ranges. With a dual ring mount for 20mm Picatinny rails and a CR2032 3V button cell included, this LPVO is ready to rock straight out of the box!