Airsoft Outer Barrel and Parts

If you want your SigAir MPX even shorter than it comes from the factory this kit will do it! The Laylax Outer Barrel Base & Battery Block Set for SigAir MPX includes a super short outer barrel base and the Laylax Battery Block, allowing you to install a barrel extension or a suppressor which runs beneath the handguard for the integrally suppressed look. 

This part replaces your original outer barrel with an aluminium barrel base measuring 8.5cm overall length, with 4.5cm protruding ahead of the receiver when installed. Also included is the Laylax battery block, designed to keep your battery contained within the handguard when your barrel is pointed down. The battery block won't fit over a suppressor but if you decide to fit a barrel extension it should fit any with a diameter of less than 19mm. 

A 117mm barrel extension for any AEG with a 14mm CCW thread on the end of it. Perfect if you want to use a suppressor but can't because of a barrel that is recessed far inside the rail.

A 117mm barrel extension for any AEG with a 14mm CCW thread on the end of it. Perfect if you want to use a suppressor but can't because of a barrel that is recessed far inside the rail.

A 117mm barrel extension for any AEG with a 14mm CCW thread on the end of it. Perfect if you want to use a suppressor but can't because of a barrel that is recessed far inside the rail.

An adaptor which converts the 18mm thread on the Airsoft Scorpion Evo to a 14mm Counter Clockwise (CCW) Thread

A one inch barrel extension for 14mm CCW threaded barrels, providing that little extra length should you wish to add a suppressor or tracer to your favourite RIF but can't because of a rail system being in the way.

The A01 Silencer Adapter is intended to be used on pistols with an 11mm clockwise female threaded outer barrel, such as WE pistols. When installed, the adapter provides the common 14mm CCW male thread, allowing the majority of muzzle devices to be added. The adapter is constructed from stainless steel, and is available in black, gold or silver finishes.

The A01 Silencer Adapter is intended to be used on pistols with an 11mm clockwise female threaded outer barrel, such as WE pistols. When installed, the adapter provides the common 14mm CCW male thread, allowing the majority of muzzle devices to be added. The adapter is constructed from stainless steel, and is available in black, gold or silver finishes.

An Aluminium constructed outer barrel for M4/M16 based Airsoft Electric replicas. It has a 14mm CCW thread at the end for the addition of muzzle devices and is a relatively easy part to install.

This Thread Adapter is designed for VORSK Pistols that have an 12mm Female Thread (the Thread is recessed inside the Outer Barrel). Whether you have lost the original supplied with your Pistol, or you want to install a Supressor/Tracer Unit to your Pistol, this adapter is an absolute must for those who want a standard thread (14mm CCW Male) on their sidearm.

A 76.2mm long barrel extension for any AEG with a 14mm CCW thread on its outer barrel.

If your MCX AEG has developed a bit of barrel wobble there is no need to take your suppressor off! Laylax is here to save the day with the Outer Barrel Support for MCX Virtus AEG. This piece is constructed from steel and mounts to the outer barrel base, locking it firmly in place and preventing even the slightest hint of wobble from developing, no matter how heavy your muzzle device is.

Installing this part will keep your outer barrel straight and true within the handguard and not only improves the structural strength of the MCX but should also improve accuracy by minimising flex in the inner barrel by giving the outer barrel a firm foundation. The Outer Barrel Support is constructed from steel, giving it more than enough strength to do its job perfectly.

A Two-Piece Outer Barrel Assembly for AR/M4/M16 Platform Airsoft Replicas, constructed to a tough standard using Aluminium. The Two Piece design allows you run the barrel in a short configuration, ending just after the A-Frame Sight Post, or in it's longest configuration with the extension piece installed. Both sections of the Outer Barrel feature a 14mm CCW Thread for the installation of Suppressors, Tracer Units and other Muzzle Devices.

An impressive looking replacement Gas Block for your M4 GBB, designed to be as inobtrusive as possible. Due to the Gas Block's low profile, not only is it possible to fit inside Free-Float RIS type Handguards, but it also offers users an unobstructed and clear sightview; 

If you are looking for a CQB-optimised MCX setup the Laylax Short M-LOK handguard & Outer barrel set would be one way to get there! This CNC machined aluminium handguard, outer barrel and gas block set replaces the original parts from the Sig Air MCX AEG, making it into an ultra-compact platform to contend with all the micro-AR platforms dominating CQB sites.

Just like the original, this handguard boasts M-LOK compatibility, with slots available at the 3, 6, and 9 o'clock positions and the included 7-inch outer barrel has 14mm CCW male threading at the tip, ready for a suppressor or tracer for the sneaky types. If you find your MCX is a bit long and you prefer something more compact, no need to look at a new platform, just swap out a few parts and your MCX will fit right in your back pocket!

This adapter is designed for the LCT LCK-12 and LCK-15, allowing you to install a 24mm CW Thread on the end of your replica, for the installation of Suppressors, Tracer Units and other Muzzle Devices. Made from 100% CNC Steel, this tough adapter is a must-have for any LCK-12/15 owner who wants to customise their Rifle.

If you have ever felt like you messed up buying a rifle with a 14mm clockwise threaded barrel, weep no more! This 14mm CW to 14mm CCW thread adapter attaches to any 14mm CW male thread and provides a 14mm CCW male thread for the addition of more common CCW threaded accessories!

If you are building an M4 from the ground up or you want a new look for your M4/AR15 platform this 5KU Aluminium outer barrel is worth a look! This barrel is 14.5 inches in length, just like the standard carbine length M4 barrel but has a heavier profile towards the tip to simulate real-world heavy barrels which allow for more sustained fire before accuracy takes a dive due to heat build-up.

The barrel is constructed from two parts, the barrel itself and the barrel base which are secured together using a pair of steel grub screws. At the tip we have the Airsoft standard 14mm CCW male threading, leaving you with a wealth of options for what muzzle device you choose to mount. The profile of the barrel matches real M4 barrels throughout its length, making this a great choice as a replacement for those who don't like seeing what is clearly a skinny Airsoft barrel through the ports on their handguard. This barrel is designed for M4/AR15 AEGs and should fit the vast majority of them.

This adapter attaches to the muzzle device of the MP9 GBB and provides a 14mm CCW male thread for attaching tracer units, suppressors, or alternative flash hiders.

A replacement Front Sight Block for the LCT LCKS-74UN which features Steel Construction to the original specification, as well as a 28mm CW threaded Muzzle.

For those looking for a more realistic handling experience from their Hi-capa 4.3, Airsoft Masterpiece has come through again, this time with a steel outer barrel complete with 11mm CW female threads! This outer barrel is constructed entirely from steel, and is immaculately finished down to each dummy locking ridge and the .45 ACP engraving on the chamber. Adding a steel barrel can alter your pistols handling characteristics considerably, raising the point of balance and making it feel more like a real firearm.

The Monk outer barrels are build for super lightweight set-ups!

By using nylon and carbon fibre the outer barrels weighs in at only around 30 grams! It is the most lightweight outer barrel on the market today.

This outer barrel is compatible with the Monk GO Series, Monk OG Series and all other M4 series.

The Monk outer barrels are build for super lightweight set-ups!

By using nylon and carbon fibre the outer barrels weighs in at only around 30 grams! It is the most lightweight outer barrel on the market today.

This outer barrel is compatible with the Monk GO Series, Monk OG Series and all other M4 series.

The Monk outer barrels are build for super lightweight set-ups!

By using nylon and carbon fibre the outer barrels weighs in at only around 30 grams! It is the most lightweight outer barrel on the market today.

This outer barrel is compatible with the Monk GO Series, Monk OG Series and all other M4 series.

The Monk outer barrels are build for super lightweight set-ups!

By using nylon and carbon fibre the outer barrels weighs in at only around 30 grams! It is the most lightweight outer barrel on the market today.

This outer barrel is compatible with the Monk GO Series, Monk OG Series and all other M4 series.

The Monk outer barrels are build for super lightweight set-ups!

By using nylon and carbon fibre the outer barrels weighs in at only around 30 grams! It is the most lightweight outer barrel on the market today.

This outer barrel is compatible with the Monk GO Series, Monk OG Series and all other M4 series.

The Monk outer barrels are build for super lightweight set-ups!

By using nylon and carbon fibre the outer barrels weighs in at only around 30 grams! It is the most lightweight outer barrel on the market today.

This outer barrel is compatible with the Monk GO Series, Monk OG Series and all other M4 series.

If you have plans for a head-turner of a Hi-capa build with some serious flair, we have the perfect outer barrel for you! Introducing the Laylax Fluted Outer Barrel, an aluminium replacement for your original outer barrel finished in a beautiful and eye-catching heat gradation look. This outer barrel is compatible with the Tokyo Marui Hi-capa 5.1 GBB pistol and its clones. 

If you have switched out the handguard or outer barrel on your M4/AR15 and now it wobbles you need Laylax's barrel shims to firm it up! These shims are basically small discs of aluminium which can be sandwiched between the outer barrel and upper receiver to adjust the fit with various different barrel nuts. If you are building an M4 platform, be it an AEG or GBBR, these handy shims are essential to have in the toolbox if you want a new handguard or outer barrel to fit perfectly at the right place with no wobble whatsoever.

We all know just how awesome an MP7 looks with a suppressor, now your Umarex MP7 AEG can rock the sneaky look too! This Dytac thread adapter screws onto your MP7's 12mm male threads and provides a 14mm CCW male threaded end so you can add a suppressor or tracer unit of your choice!