FMA Airsoft

A set of Polymer Goggle retainers which will secure a set of goggles to your helmet, provided you have a set of FAST-style rails on your lid and your goggle strap is no wider than 36mm.

A set of Polymer Goggle retainers which will secure a set of goggles to your helmet, provided you have a set of FAST-style rails on your lid and your goggle strap is no wider than 36mm.

If you're running an EXF helmet from EmersonGear or FMA, this helmet cover is the key to styling up your lid. The cover is constructed from mesh fabric, available in Multicam, Dark Earth and Black, complete with velcro so you can customise it with I.D or Morale patches. 

If you went for a black helmet and you find it stands out in the woods, grab a Multicam cover to help you blend in! Likewise, if you're rocking a tan or foliage green helmet and you want a more tactical look for CQB, slap a Black cover on that bad boy to change things up! 

If you're running an EXF helmet from EmersonGear or FMA, this helmet cover is the key to styling up your lid. The cover is constructed from mesh fabric, available in Multicam, Dark Earth and Black, complete with velcro so you can customise it with I.D or Morale patches. 

If you went for a black helmet and you find it stands out in the woods, grab a Multicam cover to help you blend in! Likewise, if you're rocking a tan or foliage green helmet and you want a more tactical look for CQB, slap a Black cover on that bad boy to change things up! 

If you need an easy way to avoid blue-on-blue situations in the dark confines of CQB or urban skirmishes, this affordable helmet marker light from FMA should stop your mates from shooting you! This light offers a simple red flash mode which can be activated by pressing the centre of the light and turned off again in the same way.

The backing of the light is constructed from high density polymer to keep it rigid and the front is constructed from transparent rubber. The Helmet Marker Light is designed to be mounted to an Airsoft helmet and comes packaged with a pair of adhesive velcro strips, one female velcro and one male velcro so you can slap it on your lid easily right away!

If you need an easy way to avoid blue-on-blue situations in the dark confines of CQB or urban skirmishes, this affordable helmet marker light from FMA should stop your mates from shooting you! This light offers a simple red flash mode which can be activated by pressing the centre of the light and turned off again in the same way.

The backing of the light is constructed from high density polymer to keep it rigid and the front is constructed from transparent rubber. The Helmet Marker Light is designed to be mounted to an Airsoft helmet and comes packaged with a pair of adhesive velcro strips, one female velcro and one male velcro so you can slap it on your lid easily right away!

If you're looking for a stylish cover for your FAST Maritime replica, the FMA Multifunctional Cover is a great shout. This helmet cover includes a built-in counterweight pouch, ideally suited to a strobe light, power bank or other small accessories. As with other helmet covers, the Multifunctional Cover includes loops for foliage and cable routing, Velcro panels for Morale andI.D patches and a cutout for the NVG mount up front. 

This cover is designed specifically for the FAST Maritime helmet cut and won't fit other FAST helmets like the PJ, Bump or Ballistic. If you operate in many different environments and like to change your camo to suit, this helmet cover can help you stay concealed and look fantastic while doing it!

If you're looking for a stylish cover for your FAST Maritime replica, the FMA Multifunctional Cover is a great shout. This helmet cover includes a built-in counterweight pouch, ideally suited to a strobe light, power bank or other small accessories. As with other helmet covers, the Multifunctional Cover includes loops for foliage and cable routing, Velcro panels for Morale andI.D patches and a cutout for the NVG mount up front. 

This cover is designed specifically for the FAST Maritime helmet cut and won't fit other FAST helmets like the PJ, Bump or Ballistic. If you operate in many different environments and like to change your camo to suit, this helmet cover can help you stay concealed and look fantastic while doing it!

If you're looking for a stylish cover for your FAST Maritime replica, the FMA Multifunctional Cover is a great shout. This helmet cover includes a built-in counterweight pouch, ideally suited to a strobe light, power bank or other small accessories. As with other helmet covers, the Multifunctional Cover includes loops for foliage and cable routing, Velcro panels for Morale andI.D patches and a cutout for the NVG mount up front. 

This cover is designed specifically for the FAST Maritime helmet cut and won't fit other FAST helmets like the PJ, Bump or Ballistic. If you operate in many different environments and like to change your camo to suit, this helmet cover can help you stay concealed and look fantastic while doing it!

If you love the looks of FAST helmets but need extra airflow to keep your head cool and maintain focus, the FAST PJ Replica from FMA should suit you perfectly. This helmet replicates the real steel Para Jump/Carbon FAST helmet, featuring ARC accessory rails on each side and an NVG mount up front, complete with a protective insert. 

One of the best features of this helmet is its OCC adjustment dial, located on the rear of the suspension. The OCC dial provides perfect stability when cranked down, meaning if you have an action camera or other kit mounted to your lid it won't slide around on your head during dynamic movements. Whether you are looking for a summer alternative to a ballistic helmet replica or you want to reduce the chances of your goggles fogging, the FAST PJ Helmet Replica is the way to go! 

If you are looking for a helmet but want to remain light on your feet, the FMA FAST BJ Helmet Replica is definitely worth a look. This helmet is styled after the Base Jump/Bump FAST helmet and features a built-in NVG mount at the front, ARC rails on either side and a ported shell to improve airflow and comfort along with reducing the chances of goggles fogging. 

Also featured in this helmet is the game-changing OCC adjustment dial, designed to keep the helmet super snug and stable on your head no matter what you have mounted or how hard you sprint. If you're planning on running a GoPro or other action camera to record your Airsoft escapades, this is one of the most stable platforms you can mount it to!

If your plate carrier has the "last chicken in the shop" look, a dummy SAPI plate will have it looking just like the real thing. The FMA SAPI Dummy Ballistic Plate for Plate Carriers is designed to fit most Airsoft plate carrier vests, with approximate dimensions of 31.3 x 25.4 x 1.9cm. The set only includes a single plate, so if you need a plate for the front and the rear of your carrier you will need to order two. 

Styled to match real Small Arms Protective Inserts, the FMA Dummy Ballistic Plates are perfect for any plate carrier that likes to crumple up and can really elevate your look in terms of realism. The idea behind polymer dummy plates is that they allow a replica plate carrier to keep an authentic shape without the burden of weighted or real SAPI armour plates. 

An additional perk is that any hits to your plate will be far less painful but still give off a nice loud "thwack" so you know you've been hit. If your plate carrier is looking a bit sad, this should give it the solid look of the real deal!

If you need a handling upgrade for your KeyMod-equipped primary, a stubby VFG will help you steer between targets far faster! The FMA Stubby Vertical Foregrip; KeyMod is constructed from high-density polymer with steel mounting hardware and can be fitted to any KeyMod rail system at a position of your choice. This grip is highly adaptable and can be used in multiple ways, including in a traditional vertical grip hold and with a thumb-over-bore hold. 

The grip has a ribbed exterior to enhance traction and its stubby design means it is far less likely to snag on your sling or other protruding gear. Also present is a storage compartment inside the grip, designed for CR123a batteries but equally capable of housing a small stash of tactical sweets to help you maintain energy and morale while skirmishing. The compartment can be accessed by unscrewing the base of the grip, and even includes a rubber O-ring to prevent moisture ingress. If you usually use a standard VFG and want to upgrade to something more modern, this grip is ideal!

A Belt-Mounted Ammo Carrier for 4 x Airsoft Shotgun Shells, allowing you to perform clean and precise reloads, and to stylishly carry more ammunition on your loadout. If used for a shell-ejecting Shotgun, the Shells are perfectly laid out for a double-stack reload.

This headset adapter is designed to mount COMTAC I/II model headsets to ARC Rails commonly found on Ops Core style Helmets. If you own a compatible pair of Active Ear Defenders and want to mount them directly to your Helmet rather than using a bulky headband, the the EXF ARC Rail Adapters for SRD Headsets is the way to go.

A set of Velcro-backed, soft foam pads for placing inside helmets, to ensure that the position of your helmet is both correct and comfortable. They pads can be used in combination with an existing set of pads, or can be used to replace old and missing pads. 

If you like to keep pace with the latest innovations in the real steel world, this belongs on your head! The IHPS Combat Helmet is the US Army's latest issue brain bucket, rocking an innovative boltless suspension design, accessory rails and an NVG mount bracket up front. FMA's replica matches the look and can be kitted out like the real thing, but will only protect you from BBs, not incoming rounds, shrapnel or bricks! 

The set includes the helmet itself, a helmet cover in the same colour as the helmet shell, a set of user-configurable internal foam pads and external velcro panels so you can add patches to customise your lid. The helmet cover is a specific design for the IHPS and includes counterweight straps and the rear and velcro on the top, rear and sides. If you like to lead the pack when it comes to the latest replica kit, the IHPS helmet should suit you well!

If you like to keep pace with the latest innovations in the real steel world, this belongs on your head! The IHPS Combat Helmet is the US Army's latest issue brain bucket, rocking an innovative boltless suspension design, accessory rails and an NVG mount bracket up front. FMA's replica matches the look and can be kitted out like the real thing, but will only protect you from BBs, not incoming rounds, shrapnel or bricks! 

The set includes the helmet itself, a helmet cover in the same colour as the helmet shell, a set of user-configurable internal foam pads and external velcro panels so you can add patches to customise your lid. The helmet cover is a specific design for the IHPS and includes counterweight straps and the rear and velcro on the top, rear and sides. If you like to lead the pack when it comes to the latest replica kit, the IHPS helmet should suit you well!

If you run several different pistols and don't want to swap pouches, the FMA Polymer Pistol Magazine Pouch is the right pouch for you! This pouch works similarly to real steel Fastmag magazine pouches, offering adjustability via external rubber straps, suitable for EU-series, Hi-capa, F226, B9 & 1911 magazines but not suitable for particularly large mags like Desert Eagle, Five-seveN or MK.23 magazines. 

The Polymer Pistol Magazine Pouch can be mounted either to 1.5-inch belts or MOLLE loops via the polymer mount on the rear. If variety in sidearms is your thing, this is the mag pouch for you!

If you are looking for that last small item to give your helmet/kit setup some added flair, check out the Signal light from FMA. This light can be attached to either velcro or a MOLLE rig and comes complete with a wireless charging kit, MOLLE mount, helmet mount and Velcro.

A set of Velcro-backed, soft foam pads for placing inside helmets, to ensure that the position of your helmet is both correct and comfortable. They pads can be used in combination with an existing set of pads, or can be used to replace old and missing pads. 

If you're looking for a stylish tactical helmet but want to separate yourself from the FAST-wearing masses, the Next Generation Spec-Ops Ballistic Helmet Replica is the unique lid you've been looking for! This helmet is a great replica of one of the most modern, up-and-coming ballistic helmets, known in the real steel world as the "Caiman Ballistic Helmet". Naturally, this helmet does not provide any ballistic protection but it will make you look utterly slick in game! 

Furnished with an NVG mount up front and skeletonised ARC rails on each side, the Next-Gen Ballistic Helmet is more than a match for FAST, Airframe and MICH helmets, with a uniquely modern style to mark it out from the rest. Inside, we are treated to an OCC-style rotary adjustment dial which keeps the helmet stable on your head regardless of whether you mount an action camera to the front or navigation lights to the sides. If you want to set yourself apart from the crowd and run one of the latest and greatest real steel helmet designs in replica form, here you go!

This PVC 3D effect patch is velcro backed, and ideal for placing on Hats, Rigs, Backpacks, or anywhere with a free space of Velcro. The Patch features the M72 LAW (Light Anti-Tank Weapon), which is a portable unguided anti-tank weapon that fires a 66mm dumbfire munition.

A velcro backed Patch which is made from PVC material and has a 3D effect. It is perfect for placing on Rigs, Hats, Backpacks, or anywhere you can find that has some velcro space available. This patch features the infamous RPG-7, which is a dumb-fire portable Rocket Propelled Grenade launcher that is fired from the shoulder.

A Polymer constructed set of adaptors for railed helmets, allowing you to install 20mm accessories to your helmet setup.

A short and compact KeyMod foregrip, designed to be attached to KeyMod Railed Hand Guards to provide an additional control when handling your Airsoft weapon. 

A mock Airsoft suppressor designed to be attached to the end of Airsoft Rifles to give them a more unique look, and to slightly suppress the sound leaving the barrel. This is the perfect purchase for those who are looking for a suppressor that can be attached to a huge variety of weapons, or for those looking to dampen the noise made from the end of the weapon.

A Polymer constructed Helmet which is shock-resistant and durable. It has an adjustable chin strap and comes included with adhesive internal padding to make it more comfortable/fit better at your control. The front of the Helmet features a slot for NVG/Wilcox Mounts, and the side rails come included with 20mm inserts for you to install compatible accessories to the sides of the helmet.

A Polymer constructed Helmet which is shock-resistant and durable. It has an adjustable chin strap and comes included with adhesive internal padding to make it more comfortable/fit better at your control. The front of the Helmet features a slot for NVG/Wilcox Mounts, and the side rails come included with 20mm inserts for you to install compatible accessories to the sides of the helmet.

A Polymer constructed Helmet which is shock-resistant and durable. It has an adjustable chin strap and comes included with adhesive internal padding to make it more comfortable/fit better at your control. The front of the Helmet features a slot for NVG/Wilcox Mounts, and the side rails come included with 20mm inserts for you to install compatible accessories to the sides of the helmet.