Full Metal Airsoft Guns

If you're looking for a highly flexible, full metal M4/AR-15 platform, the Delta Armory DA-A19-EGL ALPHA™ TEMPEST 1 M4/AR-15 AEG should suit you perfectly! Kitted out with Delta's ALPHA line externals with the unique billet-style receiver and an SMR-style handguard up front, this M4 doesn't look like anything else out there, and the perks don't end there!

Inside, you'll find a 6.03mm tightbore measuring 380mm in length, a set of 18:1 ratio steel gears mounted on 8mm ball bearing bushings, an SHS piston with a full steel tooth rack and an SHS delayer chip and tappet plate to add reinforcement in the key places that need it.

The pre-installed EAGLE™ MOSFET allows you to program the trigger for semi-automatic only, burst mode, binary trigger, AUG mode and sniper delay. Coupled with its quick-change spring system, the TEMPEST 1 makes for a great DMR base gun thanks to its relatible easy conversion process. Whether you're looking for an all-rounder for both indoor and outdoor environments or you want to quickly switch between a DMR setup and standard AEG, the Delta Armory DA-A19-EGL ALPHA™ TEMPEST 1 M4/AR-15 AEG will be an asset to you!

If you've been umming and ahhing about a GBBR but the technical aspects put you off, the G&G MGCR 556 GBB Rifle should give you what you need! This superbly designed gas blowback rifle works just like the real thing when it comes to handling and manipulation but is considerately designed on the inside to ensure it outlasts rival platforms, both in its lifespan and in its cold weather performance.

Externally, the MGCR is a unique design from G&G based on the M4/AR-15 shape but considerably enhanced with a weight-reduced receiver, enlarged ambidextrous controls and a lightweight M-LOK handguard for all your mission essential accessories. The stock depends on which length variant you choose, but all are equipped with internal storage compartments for snacks or batteries and QD sling sockets on either side. Make no mistake, from an external design standpoint, this AR is at the cutting edge!

Inside, we are treated to internals we will probably never need to touch, including an ultra-light aluminium bolt carrier tipping the scales at a mere 108g with the nozzle, a built-in buffer system disguised as a gas piston to reduce wear from the bolt carrier impacting the HOP-up unit and full steel trigger components, including the trigger, sear, hammer, disconnector and valve knocker, with a steel bolt catch thrown in for good measure. Experienced GBBR users will know, when it comes to essential steel GBBR internals, the MGCR ticks all the boxes!

If you've been umming and ahhing about a GBBR but the technical aspects put you off, the G&G MGCR 556 GBB Rifle should give you what you need! This superbly designed gas blowback rifle works just like the real thing when it comes to handling and manipulation but is considerately designed on the inside to ensure it outlasts rival platforms, both in its lifespan and in its cold weather performance.

Externally, the MGCR is a unique design from G&G based on the M4/AR-15 shape but considerably enhanced with a weight-reduced receiver, enlarged ambidextrous controls and a lightweight M-LOK handguard for all your mission essential accessories. The stock depends on which length variant you choose, but all are equipped with internal storage compartments for snacks or batteries and QD sling sockets on either side. Make no mistake, from an external design standpoint, this AR is at the cutting edge!

Inside, we are treated to internals we will probably never need to touch, including an ultra-light aluminium bolt carrier tipping the scales at a mere 108g with the nozzle, a built-in buffer system disguised as a gas piston to reduce wear from the bolt carrier impacting the HOP-up unit and full steel trigger components, including the trigger, sear, hammer, disconnector and valve knocker, with a steel bolt catch thrown in for good measure. Experienced GBBR users will know, when it comes to essential steel GBBR internals, the MGCR ticks all the boxes!

If you've been umming and ahhing about a GBBR but the technical aspects put you off, the G&G MGCR 556 GBB Rifle should give you what you need! This superbly designed gas blowback rifle works just like the real thing when it comes to handling and manipulation but is considerately designed on the inside to ensure it outlasts rival platforms, both in its lifespan and in its cold weather performance.

Externally, the MGCR is a unique design from G&G based on the M4/AR-15 shape but considerably enhanced with a weight-reduced receiver, enlarged ambidextrous controls and a lightweight M-LOK handguard for all your mission essential accessories. The stock depends on which length variant you choose, but all are equipped with internal storage compartments for snacks or batteries and QD sling sockets on either side. Make no mistake, from an external design standpoint, this AR is at the cutting edge!

Inside, we are treated to internals we will probably never need to touch, including an ultra-light aluminium bolt carrier tipping the scales at a mere 108g with the nozzle, a built-in buffer system disguised as a gas piston to reduce wear from the bolt carrier impacting the HOP-up unit and full steel trigger components, including the trigger, sear, hammer, disconnector and valve knocker, with a steel bolt catch thrown in for good measure. Experienced GBBR users will know, when it comes to essential steel GBBR internals, the MGCR ticks all the boxes!

The LCK-15 is an Airsoft Electric Gun based on the AK-15, which is a modernisation of the AK platform that went through many iterations and updates to counter issues, until the AK-12 and AK-15 were finalised.

Authentic and gorgeous, this is the first thought you should have when looking at this real wood A&K Dragunov SVD Sniper Rifle. A replica of the renowned Russian marksman rifle, this AEG looks seriously badass! This version has gorgeous real wood furniture which is a fantastic match for the plywood which adorned the original SVD when it was first produced for the Russian military in 1963. This Dragunov boasts full metal construction with some steel parts as well, giving it a reasonably realistic weight without making it a pain to carry around all day!

Staying true to the real Dragunov this AEG is locked to semi-auto firing only, it features a custom gearbox and a 6.03mm diameter barrel. This, paired with the Dragunovs neodymium motor and 590mm inner barrel, means it can pack quite a punch and a superior range. The A&K Dragunov would be an excellent platform for a DMR or sniper rifle loadout, just like its real-world utilisation. If you are looking for a long-range platform that has an authentic and iconic look, with real wood and steel, then the A&K Dragunov SVD Sniper Rifle should be in your sights!

Whether you are imitating a US Navy SEAL Sniper or you simply appreciate a supersized 7.62x51mm style AEG which is ready for both DMR duty and assault rifle capabilities straight out of the box, the A&K SR25/Mk11 MOD 0 AEG should suit you well. This AEG is styled after the real steel SR-25 (Stoner Rifle-25) that was first issued to Navy Seal snipers who assisted operations in Somalia in 1993.

This AEG looks clean and surgical and you best believe it shoots like it too! The A&K SR25/Mk11 MOD 0 AEG is sporting a version 2 long gearbox (aka V2.5) complete with steel gears running on 8mm ball-bearing bushings. This, paired with the extremely long barrel that this rifle boasts, results in some sublime accuracy potential straight out of the box. If you're looking for a brilliant platform that is adaptable for both assault rifle and DMR builds, then look no further, the A&K SR25/Mk11 MOD 0 AEG might be just what you need!

If you like the AK aesthetic and want something new, the ARCTURUS AK-12 AEG Rifle; Optical MOSFET is the meanest-looking AK out there! This full metal beast replicates the real steel AK-12 in its Russian Armed Forces-issued format, boasting an almost entirely steel and stamped steel build resulting in one of the most authentic AK handling experiences Airsoft has to offer. Make no mistake, this is a hefty platform!

Inside the version 3 gearbox, we are treated to the usual ARCTURUS complement of low-friction internals including 18:1 ratio steel gears running on 8mm ball-bearing bushings and a 23TPA high torque motor for a super-snappy trigger response. The pre-installed optical MOSFET makes things even sweeter, offering programmable fire modes, adjustable active braking, adjustable trigger sensitivity and adjustable pre-cocking. This AK-12 also includes a 4th fire selector position offering 2 round burst, just like the real AK-12!

As with other ARCTURUS AK releases, the Optical MOSFET-equipped AK-12 is at the peak of AEG realism with flawless quality externals and advanced internals with full aftermarket compatibility. If you're in the mood for a modern AK but prefer the military-issued look over the "tactical AK" look, the ARCTURUS AK-12 AEG Rifle; Optical MOSFET will give you what you need!

Based on a prototype Begadi design, this futuristic and sci-fi-looking gun is an Airsoft electric DMR rifle and ready to rock straight out of the box! The Ares Otto Repa SOC SLR Sniper Rifle (MSR-SOC)  features a fully adjustable bipod and cheek rest, an inbuilt monopod and even an inbuilt and fully functional red dot laser!

Combine this with a full metal external construction with majority CNC 6063 Aluminium and alloy parts, and you get a realistic Airsoft replica that almost breaks the scales at 6.1 kg! Naturally, this means the MSR-SOC is not for the slouches, but more for those who value the realistic marksman experience and role, taking time to choose your position and prioritising concealment over mobility. 

Internally, the MSR-SOC is a pure-bred DMR, with a unique gearbox shell boasting plenty of compatibility with common version 2 gearbox parts for the upgrade fiends. As it comes, the MSR-SOC has an enormously long 670mm inner barrel and hits out at approximately 430 FPS straight out of the box, with a super snappy trigger response thanks to the pre-installed EFCS MOSFET and plenty of strength thanks to the piston's full steel tooth rack. If you want to take a walk on the wild side and run a DMR rifle nobody else has, the Ares Otto Repa SOC SLR Sniper Rifle (MSR-SOC) is what you need!

If you're sick and tired of seeing the usual M4 and AK variants, the Ares Otto Repa SOC SLR Assault Rifle AEG (AR SOC) should excite you! This interesting and unique bullpup design is based on a real steel prototype designed in Germany by Otto Repa, known as the SOC SLR. This variant is the AR-SOC, the assault rifle variant and is the ideal primary to pair with a sci-fi-style loadout which requires a plausibly realistic platform which doesn't look like any rifle issued in the current day.

Inside, we have a unique gearbox shell with wide parts compatibility with version 2 gearbox internals. The Ares EFCS MOSFET is also present inside, allowing for the AR-SOC's super satisfying 2-round burst mode and super snappy trigger response. The EFCS also provides programmable fire modes through the Ares EFCS Programming Box (available separately) and also provides cycle control, meaning you'll never get a trigger lockup with the AR-SOC no matter how fast you pump out those semi-auto shots.

We think the AR-SOC would be a fantastic stand-in for the Helldivers 2 Liberator assault rifle but also looks straight out of Halo! If your next move is to build a mould-breaking sci-fi loadout, the Ares Otto Repa SOC SLR Assault Rifle AEG (AR SOC) is the perfect primary!

Introducing the Bolster Armouries QUARTZ 3.0; the latest advancement of the original QUARTZ Precision Hi-capa GBB pistol. The QUARTZ 3.0 keeps the aesthetic of the original but now rocks an Airsoft Masterpiece DVC STEEL Open Slide, Advanced Frame and CNC Aluminium Grip Type 8, along with the usual complement choice internal enhancements selected from the latest and greatest parts to enter the Airsoft market.

Equipped to provide super slick performance on the inside with considerately designed externals boasting all the absolute fastest methods of manipulation and target acquisition built-in, the QUARTZ 3.0 is a purebred competition dominator with its flared magazine well extension, extended cocking handle, and Vector Optics Frenzy-X reflex optic on a JLP Amphibious Mount

Based on the popular Tokyo Marui Hi-Capa Gold Match, the QUARTZ 3.0 is fully upgraded both inside and out, retaining nothing but a handful of springs, pins and trim parts from the original base gun. The trigger group parts have been replaced with precisely CNC-machined steel and aluminium parts from Airsoft Masterpiece with enhanced springs from AIP and the HOP-up unit has been replaced entirely, boasting more Airsoft Masterpiece along with Laylax/Prometheus and Maple Leaf parts inside.

Due to its uncompromised, competition-oriented ergonomic setup, the QUARTZ 3.0 can be operated at exceptional speed. Its ultra-light, flawlessly machined DVC slide and perfectly chosen and tuned internal upgrades result in incredible slide speed, pinpoint accuracy and remarkable gas efficiency. As with all Bolster Armouries platforms, this high-performance bar is underlined by the Bolster 24-Month Warranty and Service Programme, ensuring you get the full experience the creators intended.

If you have ever wanted to get into competition shooting but lack the time to undertake the immense amount of research, troubleshooting and fitting required to set up your pistol, Bolster Armouries is here to expedite the process and get you off to a flying start. Whether you’re shooting competitively against the clock or against the enemy team, the QUARTZ 3.0 will have you performing at your peak!

The Armorer Works Custom A-180 Rebel Blaster is the ideal sidearm for skirmishers from a galaxy far far away. This Luger pistol has been sent straight to the space age with its custom chrome-styled aluminium barrel attachment. The aluminium is CNC machined and looks flawless in its construction. The iconic Luger mechanism functions perfectly on this pistol, with each shot, the toggle will lift as the pistol cycles and return to place, just like the real thing.

The A-180 Rebel Blaster comes in two parts, the Luger pistol and the custom barrel attachment. The pistol works without the custom barrel attachment, but who wouldn't want to make this Luger look like the stylish and unique A-180 blaster? Whether you take this sidearm to fight against some galactic tyranny or display it as a fine addition to your collection, the Armorer Works Custom A-180 Rebel Blaster is the perfect pistol for revolting against any oppressive conglomerate.

This replica may not shoot lasers, but it certainly looks like it should!

If you prefer the old days when real men carried full-length rifles, you'll definitely be into the Specna Arms SA-B06 ONE™ M16A4 AEG! This full metal M4/AR-15 platform is based around Specna's original ONE™ series M16A4 but now comes equipped with the Kestrel Basic ETU, a programmable MOSFET which is far more advanced than its moniker "Basic" suggests!

The Kestrel Basic offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. Put simply, this allows the M16A4 to be set up realistically as SAFE-SEMI-3RND BURST, keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. Paired with Specna's standard 509mm 6.03mm tightbore inner barrel and rotary HOP-up unit, this is one of the best-equipped M16A4 AEGs on the market!

Whether you're working on a GWOT-era USMC loadout or you prefer the iconic M16 silhouette to its prolific shorter sibling, the Specna Arms SA-B06 ONE™ M16A4 AEG; Kestrel Basic ETU is the big M4 you need!

If you like your M16 rifles with a side of M203 grenade launcher, the Specna Arms SA-G02 ONE™ M16A4 w/ M203 Launcher; Kestrel Basic ETU is the rifle for you! This full-metal M16 is based on Specna's ONE™ series but this one is a cut above the rest, featuring the Kestrel Basic ETU. This MOSFET is programmable and offers different firing modes along with plenty of other features, the term "Basic" is definitely underselling it!

The Kestrel Basic offers plenty of features including a 3-round burst and binary trigger firing modes, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. Put simply, this allows the M16A4 to be set up realistically as SAFE-SEMI-3RND BURST, keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. Paired with the 6.03mm tightbore inner barrel and rotary HOP-up unit, this M16A4 AEG is well-equipped to complete any mission!

If you are working on a 2000s military loadout and need an M16 with some extra "firepower", the Specna Arms SA-G02 ONE™ M16A4 w/ M203 Launcher; Kestrel Basic ETU has got you covered!

If you're a fan of the most menacing military firearms, you'll definitely love the Specna Arms SA-G01 ONE™ M4A1 w/ M203 Launcher; Kestrel Basic ETU! This full metal M4A1 replica includes a barrel-mounted M203 40mm MOSCART grenade launcher pre-installed, giving you extra in game firepower and the beastly looks only a rifle with an underslung launcher can provide. Building on the original SA-G01, this variant is equipped with the Kestrel Basic ETU from Eshooter, offering plenty of features most would consider a significant step above "basic"!

The Kestrel Basic offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. The Kestrel keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. Also inside is a 6.03mm tightbore inner barrel and rotary HOP-up unit, bringing the latest iteration of the ONE™ series into line with EDGE™ and EDGE 2.0™ platforms with improved accuracy potential and the latest HOP-up unit design for M4 AEGs.

If you're planning on taking on an active-camo-clad alien or are seeking the Lone Survivor (2013) look, the SA-G01 ONE™ M4A1 w/ M203 Launcher; Kestrel Basic ETU is the ideal primary. There is nothing quite as satisfying as showering a bunker with an underslung launcher!

Bolster Armouries presents the FARRAR Precision Hi-Capa, built on the bedrock of multiple successful iterations of Bolster’s MOONSTONE and QUARTZ platforms with design specs laid out by Bolster Armouries resident IPSC shooter to meet the performance requirements and aesthetic of an Open Division race gun.

Forged from the well-respected Tokyo Marui Hi-Capa Gold Match outfitted with the Airsoft Masterpiece “Smoking Holes” CNC Slide and Frame Kit, the FARRAR Precision Hi-Capa boasts the best of the best when it comes to external quality and is bristling with CNC machined steel and aluminium internal parts, with little of the original Gold Match remaining.

Beneath the gorgeous Smoking Holes kit, you’ll find all of the best parts unearthed during the Bolster R&D process from top-tier brands such as Maple Leaf, AIP, Airsoft Masterpiece and EDGE Custom, all professionally fitted by one of the most talented pistol techs in the country and backed up by the Bolster Armouries 24-Month Warranty and Service Programme.

To make matters even sweeter, this beast of a custom Hi-Capa is topped off with a Vector Optics Frenzy-X Red Dot Sight mounted via the superb JL Progression Amphibious Mount, giving you everything you need to get stuck into Open Division IPSC or skirmish with a truly incredible primary pistol platform that will outshoot any other GBB pistol you can buy off the shelf.

Available in two striking colour schemes with a look unlike anything else out there, the FARRAR Precision Hi-Capa is an absolutely stand-out platform, even alongside other top-tier Hi-Capa builds. If you've always dreamt of wielding a custom GBB pistol which can go toe to toe with rifle platforms in-game and outcompete the best IPSC Hi-Capa builds around when shooting against the clock, set your sights on the Bolster Armouries FARRAR Precision Hi-Capa!

Bolster Armouries presents the FARRAR Precision Hi-Capa, built on the bedrock of multiple successful iterations of Bolster’s MOONSTONE and QUARTZ platforms with design specs laid out by Bolster Armouries resident IPSC shooter to meet the performance requirements and aesthetic of an Open Division race gun.

Forged from the well-respected Tokyo Marui Hi-Capa Gold Match outfitted with the Airsoft Masterpiece “Smoking Holes” CNC Slide and Frame Kit, the FARRAR Precision Hi-Capa boasts the best of the best when it comes to external quality and is bristling with CNC machined steel and aluminium internal parts, with little of the original Gold Match remaining.

Beneath the gorgeous Smoking Holes kit, you’ll find all of the best parts unearthed during the Bolster R&D process from top-tier brands such as Maple Leaf, AIP, Airsoft Masterpiece and EDGE Custom, all professionally fitted by one of the most talented pistol techs in the country and backed up by the Bolster Armouries 24-Month Warranty and Service Programme.

To make matters even sweeter, this beast of a custom Hi-Capa is topped off with a Vector Optics Frenzy-X Red Dot Sight mounted via the superb JL Progression Amphibious Mount, giving you everything you need to get stuck into Open Division IPSC or skirmish with a truly incredible primary pistol platform that will outshoot any other GBB pistol you can buy off the shelf.

Available in two striking colour schemes with a look unlike anything else out there, the FARRAR Precision Hi-Capa is an absolutely stand-out platform, even alongside other top-tier Hi-Capa builds. If you've always dreamt of wielding a custom GBB pistol which can go toe to toe with rifle platforms in-game and outcompete the best IPSC Hi-Capa builds around when shooting against the clock, set your sights on the Bolster Armouries FARRAR Precision Hi-Capa!

A Gas Blowback Airsoft Pistol manufactured and built by NUPROL as part of their RAVEN EU G-Series Pistol Range. This variant of the pistol features a semi and fully automatic firing system, allowing you to go all out on the enemy team right when you need it.

This is the perfect sidearm for any Airsoft player, allowing you to quickly and effectively protect yourself from any threat should your main weapon go down or the enemy engage you in a CQB Environment. This pistol is also very customisable, giving you plenty of aftermarket options when it comes to upgrades and accessories allowing you to make the pistol your own.

Here's a pistol we all know and love. NUPROL brings us aniconic classic Airsoft replica, still widely in use today by a variety of countries for both service and recreational shooting.

A reliable gas blowback pistol, with a lightweight polymer frame and tough alloy slide, this is a go-to tried-and-true pistol for many Airsofters.

Here's a pistol we all know and love. NUPROL brings us aniconic classic Airsoft replica, still widely in use today by a variety of countries for both service and recreational shooting.

A reliable gas blowback pistol, with a lightweight polymer frame and tough alloy slide, this is a go-to tried-and-true pistol for many Airsofters.

A Gas Blowback Airsoft Pistol from NUPROL, this EU-Series RAVEN series EU17 is a semi-automatic pistol which runs on green gas for added realism by simulating recoil by adding blowback to each shot. The pistol is highly customisable and supports a wide range of aftermarket attachments and upgrades allowing you to make the pistol truly your own.

If you love the comfort, reliability and compatibility of the EU-Series pistols, and want something that will stand out from the crowd, then the EU17 is a sure choice. This pistol is one of the most cost-effective sidearms you can run in Airsoft!

If you have been keeping an eye out for a submachine gun with a modern twist, you can give those peepers a rest, you have found it! Introducing the Double Eagle UTR45, a fresh new SMG with a fresh look, combining the AR15's familiar and comfortable fire controls with SMG.45 style magazines and an advanced multi-position side folding stock. The UTR45 isn't just about those jaw-dropping looks, it also sports the ultra-flexible Double Eagle FALCON fire control system within, together with a 6.1mm "air cushion" inner barrel to provide impressive stability and accuracy.

If you have been keeping an eye out for a submachine gun with a modern twist, you can give those peepers a rest, you have found it! Introducing the Double Eagle UTR45, a fresh new SMG with a fresh look, combining the AR15's familiar and comfortable fire controls with SMG.45 style magazines and an advanced multi-position side folding stock. The UTR45 isn't just about those jaw-dropping looks, it also sports the ultra-flexible Double Eagle FALCON fire control system within, together with a 6.1mm "air cushion" inner barrel to provide impressive stability and accuracy.

A Gas Blowback Airsoft Pistol manufactured and built by NUPROL as part of their RAVEN EU G-Series Pistol Range. This pistol is great for beginner and season players all the same, with both semi and fully automatic firing modes this pistol is almost guaranteed to put a smile on your face.

A gas blowback Airsoft pistol designed by VORSK based on the 1911 design, the VX9 boasts full metal construction for an authentic weight and a realistic feel. VORSK has taken a look at the 1911 platform and made its own tweaks, transforming it into a truly next-level pistol with a combination of old-school style and modern utility, inspired by a well-known video game featuring a bald headed barcode-tat-rocking assassin. This pistol comes as a complete package, including the Pistol, Suppressor and Magazine.

An Airsoft Hand Held Grenade Launcher which is used to fire 40mm Airsoft MOSCART / Grenade Shells. The launcher is heavy duty and is constructed with a full Alloy Body, with a Polymer Grip. 

A Co2 Gas Blowback Airsoft Pistol which is a stunning replica of the Desert Eagle .50AE, and is made to the usual high standard that Cyber Gun pride themselves on. Officially licensed and made using Alloy with a brushed steel effect, this Pistol feels great and kicks like an absolute Mule. This is NOT one to miss.

Looking for a slick full metal M4/AR15 platform with some tasty pre-upgraded internals? The SA-E07 is exactly that! This modern KeyMod handguard equipped M4/AR15 has been around the block before, but the newest version now boasts Specna Arms' unique "Light Ops" stock which is their own take on a low profile stock with some choice refinements and a fresh look unlike anything else.

The SA-E07 holds the line with its rock solid EDGE™ series internals, including the reinforced ORION™ gearbox, 6.03mm tightbore inner barrel and Gate X-ASR MOSFET already wired in. Whether you are an experienced skirmisher looking to expand the armoury or a new player who wants to jump straight in with a full metal primary, the SA-E07 with the Light Ops stock is a fantastic choice whether you are a CQB player or you prefer a bit of woodland warfare!

Looking for a slick full metal M4/AR15 platform with some tasty pre-upgraded internals? The SA-E07 is exactly that! This modern KeyMod handguard equipped M4/AR15 has been around the block before, but the newest version now boasts Specna Arms' unique "Light Ops" stock which is their own take on a low profile stock with some choice refinements and a fresh look unlike anything else.

The SA-E07 holds the line with its rock solid EDGE™ series internals, including the reinforced ORION™ gearbox, 6.03mm tightbore inner barrel and Gate X-ASR MOSFET already wired in. Whether you are an experienced skirmisher looking to expand the armoury or a new player who wants to jump straight in with a full metal primary, the SA-E07 with the Light Ops stock is a fantastic choice whether you are a CQB player or you prefer a bit of woodland warfare!

The HG-138 is a Rail Mounted BB Launcher designed to be attached to the underside of Pistols and Rifles as a single shot 40 round launcher which can be used to clear a group of enemy or as a last hurrah before you get hit.