G&G Armament Airsoft

An Alloy constructed spare or replacement magazine for the G&G GTP9 Gas Blowback Pistol and SMC9 Gas Blowback Carbine. It holds a total of 50rnds and has a huge gas reservoir to ensure it can hold enough gas to perform throughout the entire magazine.

The G&G Armament G2 Tappet Plate For V2 AEG is a reinforced AEG Tappet Plate for use with version 2 gearboxes. It is specially formulated to be strong yet flexible enough to bend slightly. The plate is constructed from extremely lightweight polymer and is designed to be attached to the air nozzle and sector gear. This process controls the feeding of BBs from the magazine into the hop up chamber.

It is compatible with almost every Version 2 gearbox on the market and comes with only the tappet plate.

If you're having issues with your AEG, and being able to pull the trigger in safe then it is likely your safety lever is bust! The G&G Armament Trigger Safety Lever For V2 Gearbox is the replacement part for you, a new safety lever will ensure that the trigger cannot be depressed while your AEGs safety is engaged.

This part is constructed from alloy and is compatible with all version 2 gearboxes. It includes the spring and the screw so you can install it all together. Be warned though, it can be a techy repair and we only recommend that professionals attempt it!

They might look like a standard Airsoft M4 AEG magazine, but they've got a little secret, they launch themselves out of your gun when empty!  A spring powered latch projects the magazine out of your gun when the mag is empty to allow you to reload faster when the seconds really count.

If you've had a cut-off lever failure or you like to keep parts on hand just in case the worst happens, the G&G Armament Cut Off Lever For V2 Gearbox is perfect. This is a replacement original part constructed from alloy, compatible with most version 2 gearboxes on the market.

The cut-off lever is a piece that sits between your trigger and sector gear and serves to interrupt or disconnect the trigger once your gearbox has made a complete cycle, very useful!

A  Full polymer constructed High Cap Magazine for the G&G branded G36 series AEGs. Perfect for those who want to spends more time shooting rather than reloading.

A 530 round high capacity, wheel-wound magazine, designed for use with G&G's UMG SMG electric replica. Constructed from durable, high strength and lightweight polymers.

A drop-in trigger, ETU & MOSFET for Version 2 compatible rear-wired Airsoft replicas, which includes features like a programmable trigger, low battery cutoff, shot sensor and comes included with a vertical 'speed trigger'.

A Full Polymer constructed Mid-Cap Magazine for the G&G branded G36 series AEGs. Perfect for those who want to inject more realism into their play-style.

If you have worn out your AEGs trigger or you want the mil-spec look to replace your current trigger, this is perfect for you! The G&G Armament Trigger For V2 Gearbox is constructed from alloy with a textured finish and is patterned after the standard curved "Milspec" trigger found on the M4A1 rifle, MK18 MOD.0 and MOD.1, along with most other M4/AR-15 rifles used in military service in the real world.

The trigger is compatible with version 2 gearboxes which are found in the vast majority of M4/AR-15 AEGs. This means that the G&G Armament Trigger For V2 Gearbox trigger should work in practically any M4/AR-15 AEG but will require the gearbox to be opened for installation.

A simple spare additional or replacement magazine for your G&G G2H Airsoft AEG. With a 40rnd real steel capacity limit, yo u can run and gun with zero BB rattle whilst sniping away with your electronic powered AEG.

This spare magazine for the G&G Armament Piranha gas blowback Airsoft pistol is constructed with a transparent polymer shell with mock 9x19mm cartridges visible within, and is a great way to make your pistol stand out on the field. It is filled with BBs using a speedloader, preferably with a GBB adapter, and can be filled with gas using the fill valve on the baseplate. If you own a G&G Piranha Pistol, then Spare Magazines are an absolute must for staying in the field longer and avoiding the long walk back to the safe zone to reload!

An Airsoft SR25 6mm BB gun style magazine designed and built by G&G for use with their range of Airsoft Electric Gun SR25 replicas. It holds 50 rounds and is of steel construction.

A drop-in trigger, ETU & MOSFET for Version 2 compatible rear-wired Airsoft replicas, which includes features like a programmable trigger, low battery cutoff, shot sensor and comes included with a vertical 'speed trigger'.

They've only gone and done it, the absolute lunatics! A drum magazine for G&G GTP9 and SMC9. Clearly G&G have been listening to the community and have brought us this 300 round wheel wound drum mag resulting in some insane firepower for your now portable LMG in pistol form factor!

A set of four Rubber-constructed Rail Covers for G&G SR Series KeyMod Handguards. If you own a G&G SR Series AEG and you want a comfortable hand-hold which provides good grip even when wearing gloves, you need a set of Rail Covers. This set is designed for the G&G SR Series; it may fit other KeyMod Handguards but it is designed for and fits best on the G&G Armament SR Series Airsoft Electric Guns. To install to a Handguard, simply push the slots into the desired KeyMod slot and then push the Rail Cover forwards to 'lock' it in place.

If you need a replacement for your G&G MOSFET or want the latest version with its more compact design, the G&G Armament ETU/MOSFET for G2 Gearbox; Rear Wired is ideal. This set is pre-wired for relatively easy installation and is the latest G&G MOSFET 4.0 with its more compact form, saving you space in your battery compartment.

Installing this set gives your AEG the option of programming 3-round burst instead of full auto, great for those who keep running out of ammo due to a heavy trigger finger! Other features include low-voltage cutoff and cycle completion, ensuring both your gearbox and battery are kept healthy in the long term. Worth noting is that this set will require 11.1V LiPos to be used and if you're installing this in a non-G&G G2 AEG you will need to carry out modifications to ensure your setup does not pre-engage (AOE correction at the least).

A 1KG bag containing approximately 4000 high quality 0.25g competition grade Airsoft BBs, constructed from polymer, and are polished to provide a smoother aerodynamically enhanced external surface. 

The first Airsoft replica of an AR-9, the real-steel AR15 rifle receiver chambered in 9mm pistol ammunition. AR-9 pistols and carbines have become extremely popular in the United States, due to their modularity, familar AR15 style controls, and compact nature. The G&G ARP9 is constructed from high-density polymer with an aluminium M-LOK handguard and includes a compact PDW stock, making this AEG a great choice as a CQB primary for those who want a more modern, high-speed submachine gun with an aggressive design aesthetic.

The first Airsoft replica of an AR-9, the real-steel AR15 rifle receiver chambered in 9mm pistol ammunition. AR-9 pistols and carbines have become extremely popular in the United States, due to their modularity, familar AR15 style controls, and compact nature. The G&G ARP9 is constructed from high-density polymer with an aluminium M-LOK handguard and includes a compact PDW stock, making this AEG a great choice as a CQB primary for those who want a more modern, high-speed submachine gun with an aggressive design aesthetic.

The perfect magazine to give you the ultimate fire-power and suppression from your G&G AP-9 AEG. Incredibly satisfying to hold and use thanks to the very thick and robust polymer construction.

An Airsoft Electric Powered 6mm AEG BB Gun, producing a satisfying 320fps, incredibly lightweight and reliable Airsoft RIF. An excellent beginner Airsoft platform but also highly favoured by experienced Airsofters due to its out-of-the-box performance.

If you're in search of a lightweight and high performance platform with the AR-9 aesthetic, the G&G ARP9 2.0 Enhanced Combat Machine AEG can't have escaped your scrutiny! This is the second generation of G&G's superb ARP9 platform, boasting several internal refinements for even more performance and an external overhaul including the G&G GOS-V9 PDW stock and a new CNC aluminium M-LOK handguard.

We think this is the best-looking ARP9 variant yet but also offers more attachment interfaces thanks to its longer handguard and even better results downrange than its still respectable older sibling. Internal improvements include a new generation of ETU and MOSFET made more efficient and compact than ever before, a further reinforced gearbox shell, a redesigned bevel gear to reduce heat build-up and a double O-ring nozzle to enhance air seal qualities. Also present is G&G's latest rotary HOP-up unit, bringing the ARP9 into line with modern Airsoft releases, offering improved setting retention and finer adjustment increments.

The original ARP9 was famously the winner of the Airsoft Players Choice Awards for best AEG several years on the trot and in our assessment, the second generation is even better. If you're after a lightning-fast CQB platform which handles like a dream and gives the enemy team nightmares, the G&G ARP9 2.0 Enhanced Combat Machine AEG is what you need!

Amidst the endless droves of pistol calibre carbines and SMGs currently being released, G&G present the MXC-9 to reassert its dominance in the field of CQB Airsoft platforms. The MXC-9 is constructed from high density polymer with a CNC machined aluminium handguard, and makes use of G&G’s superb G2 gearbox, complete with programmable fire controls allowing for 3 round burst.

In the looks department, the MXC-9  is largely based on G&G’s PCC45, and is even compatible with PCC45 magazines, but blends the receiver style of the PCC45 with a shorter handguard, sound amplifying muzzle device and a newly designed multi-position folding stock. Consider this the lovechild of the MCX and PCC45, with the frightening performance of the ARP-9 and SSG-1’s G2 gearbox!

An Airsoft 6mm BB Gun, based on the M4 / AR Platform, which is a great entry grade Beginner weapon for those looking to start playing Airsoft, or even simply Backyard Plinking.

This is not only the perfect purchase for a beginner, but as a spare or backup gun for Experienced Players, due to its hard wearing and reliability.

An Airsoft 6mm BB Gun, based on the M4 / AR Platform, which is a great entry grade Beginner weapon for those looking to start playing Airsoft, or even simply Backyard Plinking.

This is not only the perfect purchase for a beginner, but as a spare or backup gun for Experienced Players, due to its hard wearing and reliability.

This is the G&G metal Airsoft medium capacity magazine that is ideal for the Airsofter wanting to experience a little more realism into their Skirmishing style. The mag features full metal construction with a medium 125rnd capacity for STANAG Magazine compatible Airsoft Guns, such as the M4 and M16.

An Airsoft medium capacity magazine that is ideal for the Airsofter wanting to inject a little more realism into their skirmishing style. Loosely inspired by the design of modern P-Mag type magazines, this is G&Gs attempt at creating a lightweight and uniquely styled magazine for STANAG magazine compatible Airsoft guns.

G&Gs Hi-capa Killer! The Piranha SL features a split side design, with a stylish fluted barrel and a comfortable ergonomic frame with extended Picatinny rail. This pistol has a very fast cyclic rate, putting its rival, Hi-capa pistols, to shame! The Piranha SL also provides a long barrel for improved accuracy amongst a litany of other innovative G&G internal features.

If you are looking for a mid length M4/AR-15 but you have seen them all, the G&G Armament Cobalt Kinetics BAMF Recon will give you something to get excited about! This M4 platform is a complete redesign of the original M4 on the outside, boasting a unique receiver with 45-degree ambidextrous fire selectors, a flared magazine well and extended controls for fast access.

BAMF stands for "Billet Aluminium Modern Firearm", named for the manufacturing method of the real thing, being machined from billet aluminium instead of the usual M4/AR-15 receiver forgings. While the outside is unique, the internals are the same rock solid stuff G&G is well known for, including the G2 Gearbox with the latest G&G ETU/MOSFET, a rotary adjustable HOP-up unit and a 25K RPM high speed motor providing an astonishing rate of fire and ultra snappy trigger response. If you like the way the ARP-9 and SSG-1 shoot but you don't like their looks, the BAMF Recon is the same on the inside but with an awesome external style!