NUPROL

A Male Tamiya to Male Deans Adapter which will install to the wire coming from your gun and allow you to connect Deans batteries to a gun with a Mini Tamiya connector. Even if you don't own Deans batteries, its a good adapter to own as you never know when you'll be caught out at a skirmish and need to borrow a battery - and we guarantee the only battery available will be on a Deans connection.

A three point sling designed to hold your weapon when not in use, but also to take force from the drop of your weapon whilst quickly transitioning to a secondary weapon.

Built by NUPROL as part of their Power range this is a high quality charger designed to charge LiPo, NiMh, LiFe, LiHv, LiLo, NiCd and PB batteries, all of the most common types of battery used in Airsoft replicas.

If you are looking for a short tracer unit which maintains the illusion of being a suppressor, this NUPROL Tracer Unit does just that! Styled externally after a modern rifle suppressor, the NUPROL Tracer is a great addition to any CQB build thanks to its short overall length, and obviously, the intimidation factor glowing BBs provides. This tracer has an internal rechargeable battery that can be charged using the included Micro-USB cable, and can be mounted to any 14mm CCW male threaded barrel.

If you are looking for a short tracer unit which maintains the illusion of being a suppressor, this NUPROL Tracer Unit does just that! Styled externally after a modern rifle suppressor, the NUPROL Tracer is a great addition to any CQB build thanks to its short overall length, and obviously, the intimidation factor glowing BBs provides. This tracer has an internal rechargeable battery that can be charged using the included Micro-USB cable, and can be mounted to any 14mm CCW male threaded barrel.

A Nylon constructed and elasticated set of suspenders which can be put to a wide range of uses, but mainly holding the weight of your trousers or a battle belt evenly across your shoulders.

Produced by NUPROL, these Airsoft Tracer BIO BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the new RZR range of Airsoft BBs ranging from lightweight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.

These particular BBs are not only BIO BBs, but are also Tracer BBs. These BBs are created with two purposes in mind. Firstly they are created from biodegradable materials so that they will gradually break down over time when exposed to natural environments as well as being infused with special materials to allow them to glow in the dark. Touted as a more environmentally friendly BB, they are sometimes required by certain Airsoft sites to play.

This weight of BB are designed to work in any Airsoft gun, but perform at their best in beginner and low power Airsoft replicas under 350fps. Whether you're new to Airsoft, playing indoors, or looking for BBs for your Spring Powered Airsoft replica then these are the BBs for you.

If you have plucked too much or your case foam has got a bit dirty, NUPROL has the cure! The Essentials Hard Case Replacement PnP Foam is sized to fit their NUPROL Essentials Rifle Hard Cases perfectly and is an easy and affordable way to breath new life into an old and weary hard case.

A block of pick n pluck foam for the Nuprol Extra Large Wheeled Hard Case series, which can be shaped to fit the contents of your case.

A simple carry case with a padded and soft lining to protect your pride and joy. Designed with a large compartment and padded outer walls its sure to not only make transporting easier but protect anything you choose to store in it.

A simple carry case with a padded and soft lining to protect your pride and joy. Designed with a large compartment and padded outer walls its sure to not only make transporting easier but protect anything you choose to store in it.

For all you AUG lovers out there wanting to keep shooting with the need of winding. This magazine can hold up to 80 rounds and is filled from the top using a speed loader. Featuring a  classic waffle design, the mag makes it easier to grip and quicker to remove from pouches. The magazine works via a spring system, so when filled with BBs will not Rattle, unlike hi-cap magazines.

This is the perfect magazine for those who have a Steyr AUG Airsoft AEG and want more magazines so they can keep playing for longer without reloading.

If you need to bring some serious firepower to your next skirmish there are few platforms that can rival a 6-shot revolver grenade launcher! The NUPROL Matrix MGL can carry up to 6 40mm MOSCART grenade shells and unleash their payloads in under a second thanks to its revolver-like design, based on the real steel Milkor M32 MGL.

The Matrix is similar to other revolver grenade launchers we have seen in the past but with a few notable improvements. The outer barrel of the Matrix is constructed from aluminium and has a threaded tip, meaning more realistic handling, though we don't think there are any suppressors for this monstrously large thread!

The pistol grip of the original MGL has been replaced with a VFC QRS pistol grip, boasting enhanced ergonomics and crackle texture on each side for improved grip. The stock still mounts to the good old M4/AR-15 buffer tube, but the pre-installed stock on the Matrix is the VFC QRS stock, offering a snag-reducing A-frame style design with QD sling sockets on either side.

Whether you have vehicles to deal with in an upcoming Milsim skirmish or you simply want to be the badest bunker buster on the field, the NUPROL Matrix MGL will equip you to clear the enemy out of any emplacement like a bad fart clears a room!

If you're just getting into Airsoft and prefer a military-style primary, set your sights on the NUPROL Delta Pioneer SOPMOD M4/AR-15 AEG! This CQBR (Close Quarters Battle Receiver) style replica is constructed predominantly from high density polymer with an alloy outer barrel, front sight and handguard mounting hardware along with steel trim parts. This keeps the build lightweight and ideal for younger skirmishers or those with a speedy, aggressive playstyle!

Though it may be mostly polymer, this isn't the usual shiny "super-soaker" tier stuff; this is nylon fibre-reinforced polymer, the kind that may well outlast alloy when it comes to endurance. Inside, we are equipped with an alloy version 2 gearbox with 18:1 ratio steel gears running on 8mm ball bearing bushings and driven by a 21K RPM high torque motor; a competitive feature set for a platform at this price!

The inner barrel is also a 6.03mm tightbore paired with a 50° HOP-up bucking and rotary HOP-up unit, ensuring you can reach out and engage at longer ranges with an accuracy advantage using high quality BBs. If your tastes dictate a military style primary and you need something cheap but effective to get started, the NUPROL Delta Pioneer SOPMOD M4/AR-15 AEG is a fantastic choice!

A lightweight Polymer mount for FAST, BUMP and MICH Airsoft helmets that have a front mount, allowing you to attach GOPRO cameras to record your gameplay. 

A lightweight Polymer mount for FAST, BUMP and MICH Airsoft helmets that have a front mount, allowing you to attach GOPRO cameras to record your gameplay. 

An Airsoft M4 6mm BB Gun High Capacity Magazine with a twist, instead of using a bottom winding wheel, a pull cord is built into the magazine which can be pulled to quickly prime the magazine.

If you are looking for tracer BBs in heavier weights to maximise your effective range, NUPROL have what you need! The RZR 0.28g Precision Tracer BB has the same ultra-tight +/- 0.01mm tolerances as NUPROL's standard BBs but are tracer BBs which will glow when fired through an Airsoft tracer unit, helping you instinct aim in close quarters and guide your BBs onto target in low light settings.

Looking for some extra firepower to keep the enemies' heads down as you advance? The NUPROL 1200rnd Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high density polymer with a modern design aesthetic, making it perfect for practically any M4/AR15 Airsoft AEG, especially those leaning into a more aggressive look, or those looking to sample the support weapon playstyle.

Looking for some extra firepower to keep the enemies' heads down as you advance? The NUPROL 1200rnd Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high density polymer with a modern design aesthetic, making it perfect for practically any M4/AR15 Airsoft AEG, especially those leaning into a more aggressive look, or those looking to sample the support weapon playstyle.

A lightweight and tough protective carry case from NUPROL, which features PnP ( Pick & Pluck ) foam internals as well as sliding catches and padlock loops.

A STANAG type magazine which is designed to fit any Airsoft 6mm BB Gun which accepts this style of magazine, such as M4, L85, 416 and more. This type of magazine is perfect for regular Airsoft skirmishers as the magazine holds lots of rounds, and increases the length of time between having to stop and reload, allowing you to put more rounds down range without stopping.

Whether you are new or a regular skirmisher, who doesn't want the hassle of regularly changing magazines but still wants that authentic look, these are an essential purchase. 

If you need a battery for your M4/AR-15 AEG buffer tube and would rather get everything you need in one place, here it is! This bundle includes a NUPROL LiPo Balance Charger, a Safe Charging Bag and a 7.4V 1450mAh LiPo Battery in Crane configurations with a Mini-Tamiya connector; an ideal setup for a Mini-Tamiya equipped rear wired M4/AR-15 AEG with a Crane stock battery compartment. 

The dimensions of the included battery are as follows: 11.4cm x 0.7cm x 1.5cm per cell group (2x cell groups on each battery) with approximately 9cm of wiring between the battery and connector. 

If you have a habit of killing LiPo batteries by running them on too low a voltage, or you would rather not take the chance, a LiPo voltage monitor would be a good call! This device connects to the balance port of your 7.4V or 11.1V Airsoft LiPo and will provide a readout of the voltage of each cell, together with the total battery voltage. This device will also emit an alarm if the cell voltage becomes unbalanced or drops too low, preventing you from damaging your batteries and having to purchase new ones more often than you should. To use the device, you will need to plug the balance lead (small white connector) of your LiPo battery into the leftmost contacts, with the contacts oriented to face downwards. The visible silver contacts on your balance lead should be facing upwards.

The NUPROL Bell Target is a great way to practice your accuracy with your Airsoft platforms, Air rifles or slingshots in your back garden. It is constructed from steel, strong enough to survive the impact of any projectile you decide to send at it. Just remember to wear some eye protection in case of a ricocheting BB or equivalent.

When shooting the targets, if your shots are hard enough, you can knock them up and then reset them all by shooting the top target. This will drop the bottom targets back down ready to shoot them again. Every time you hit the target you'll be treated with a satisfying ping noise.

If you fancy an easy way to practice your aim in the comfort of your own back garden, you need the NUPROL Bell Target, you'll be a deadeye marksman in no time!

Two Point Bungee sling designed to hold your weapon when not in use, but also to take force from the drop of your weapon whilst quickly transitioning to a secondary weapon.

An electric powered M4 based Airsoft replica, which is constructed mainly from Polymer to offer a lightweight and maneuverable platform which packs a punch.

An Alloy constructed Kill Flash for 26, 32, 40 and 50mm riflescopes, which will keep the glare off your objective lens and give a clearer image; leaving you undistracted to take that all important shot.

Looking for some extra firepower to keep the enemies' heads down as you advance? The NUPROL 1200rnd Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high density polymer with a modern design aesthetic, making it perfect for practically any M4/AR15 Airsoft AEG, especially those leaning into a more aggressive look, or those looking to sample the support weapon playstyle.

If you are looking for magazines with a modern style for your AK rifle, this will do the trick! The NUPROL 500rnd Waffle High-Cap magazine is designed to work with AK47/74 AEGs and is a 7.62x39mm style magazine. The mag has a waffle texture on the outside to add gripping qualities and improve strength and is a wheel wound high capacity magazine which holds a 110 BBs.

The magazine can be filled via the fill window at the top of the magazine body and is tensioned using the winding wheel on the baseplate. This mag has the curve of a 7.62x39 style magazine making it ideal for AK47/AKM rifles but can be used in most standard AK styled AEGs.