RIS/RAS Rail & Attachments

A set of two High Profile Scope Rings for 30mm Optics, that will easily connect to 20mm RIS/RAS Picatinny Rail Systems. They have a two-piece design which makes installation very easy, and comes included an Alley Key to aid installation. They are High Profile Rings which will hold the Scope higher than standard, making it easier to aim whilst wearing Lower Face Protection.

A set of six Polymer 20mm Rails which will fit into KeyMod or M-LOK slots to provide a more standard rail where there normally would not be.

A set of six Polymer 20mm Rails which will fit into KeyMod or M-LOK slots to provide a more standard rail where there normally would not be.

If you have a MK23 NBB pistol you might have noticed the lack of options for mounting accessories. At one point in time the MK23 was cutting edge, but in the current day and age it is in dire need of a Picatinny rail to mount some tactical goodies. Enter the Hades Airsoft MK23 rail adapter, the answer to your prayers!

If you are running a SCAR and you want to make it sexy a rail extension is the key to making jaws drop! The Double Bell M-LOK 5 Inch Handguard Extension For SCAR is designed to fit the Double Bell SCAR-H (it will not fit the Double Bell SCAR-L) but should also fit the DBoys SCAR-H and VFC SCAR-L and SCAR-H AEGs as well as others based on the VFC construction style.

The handguard boasts CNC Aluminium construction for precision and weight savings and comes packaged with a 9.3cm/3.75-inch barrel extension so your outer barrel is the correct length for the extension. Present on each side is a QD sling socket to give you the option to add a slick QD sling setup with QD sling swivels. On each side and on the bottom we have M-LOK negative space attachment slots and on the top of the extended piece there is a short length of 20mm Picatinny rail in the ideal spot to mount a PEQ, DBAL or tactical flashlight. Ditch those 20mm rails and get some M-LOK on your SCAR and get it ready for combat in the 2020s!

The M322 Scout Tactical Flashlight is a modern LED torch with RM45 offset mount for Picatinny 20 mm rail. This flashlight produces a fantastic 280 lumens from 1x CR123 battery, made possible due to the modern CRE2 LED bulb installed.

An advantage of this torch over similar models is that it comes with 2 switches that can be used in tandem, thank to the dual function tail cap. It features a constant on push button in addition to a lead-attached pressure switch . This means that you don't have to unscrew one to get to the other, like in some other flashlight models.

Another feature unique to this torch is the mount, in that it is an offset mount that allows it to be mounted closer to the handguard for a slick overall platform.

If you are running a SCAR and you want to make it sexy a rail extension is the key to making jaws drop! The Double Bell M-LOK 5 Inch Handguard Extension For SCAR is designed to fit the Double Bell SCAR-H (it will not fit the Double Bell SCAR-L) but should also fit the DBoys SCAR-H and VFC SCAR-L and SCAR-H AEGs as well as others based on the VFC construction style.

The handguard boasts CNC Aluminium construction for precision and weight savings and comes packaged with a 9.3cm/3.75-inch barrel extension so your outer barrel is the correct length for the extension. Present on each side is a QD sling socket to give you the option to add a slick QD sling setup with QD sling swivels. On each side and on the bottom we have M-LOK negative space attachment slots and on the top of the extended piece there is a short length of 20mm Picatinny rail in the ideal spot to mount a PEQ, DBAL or tactical flashlight. Ditch those 20mm rails and get some M-LOK on your SCAR and get it ready for combat in the 2020s!

This Upper and Lower Receiver Set is an original replacement part for the APS ASR series M4/AR15 AEGs but may also fit other gearboxes, though it may require modification. The set includes an alloy upper and lower receiver, a bolt catch, charging handle, a magazine release, trigger guard, a steel dust cover and steel body pins. If you are building a spare upper for your APS ASR AEG this would be a perfect fit, but could also be used to add a touch of metal to a polymer M4/AR15 as long as you are okay with potentially undertaking modifications.

A compact Riser Mount for 20mm Rail Systems, which allows you to mount a Red Dot Sight higher than it normally would, which is useful for Lower Face Protection users who struggle to aim down their sights. By mounting you Red Dot higher, you can look down the sight even whilst wearing something to protect your mouth, such as a Lower Face Mesh Mask.

If you're a talented skirmisher with skills to showcase, the Novritsch GoPro Adapter for 20mm Picatinny Rails should suit you perfectly. This CNC aluminium mount attaches to any 20mm Picatinny rail and provides a mount for GoPro-style action cameras with the socket mount. Please note, the barrel-mounted rail shown in the images is for demonstration purposes only and is not included with the set. 

The mount can be fitted to position the camera on the left or right side of your primary and only minimally affects the weight distribution and balance thanks to its lightweight aluminium build. If you have epic Airsoft moments to record for the ages, the Novritsch GoPro Adapter for 20mm Picatinny Rails is what you need!

A 20mm RIS compatible scope mount ring, designed to enable users to mount VORTEX's high quality optics onto their Airsoft guns or real firearms.

The STTI B9/B92 Conversion Kit is a Polymer constructed Body Kit for... you guessed it, B9 and B92 Airsoft Gas Blowback Pistols. This awesome kit will convert your lowly Airsoft Pistol into a functional Carbine with Sliding Stock, 20mm Rail System, Ambidextrous Charging Handle as well as plenty of room for a Suppressor, Inner Barrel Extension or Tracer Unit!

If you're recreating the latest real-world German DMR rifle, the East Crane 20mm Picatinny Scope & Red Dot Mount for G-417 Replicas will put a smile on your face! Patterned after the mount setup provided with the real steel G28 DMR, this set includes a dual ring mount for either 25 or 30mm monotube scopes and a red dot sight mount with a built-in sunshade, designed for T1 footprint/mounting standard micro red dot sights. The set includes spacers to allow a 25mm monotube scope to be mounted, though by default the dual ring mount fits 30mm monotubes.

Both the scope and red dot mount are constructed from aluminium with steel bolts, nuts and screws, mounting to 20mm Picatinny rails. The dual scope ring includes a 20mm Picatinny rail on the top of each ring which is intended to allow the red dot sight mount to be fitted, though these are removable if you want to use the two mounts on separate platforms. On the right side of the mount, you'll find helpful engraved markings indicating the mounting direction, just like the real deal.

While it is designed to mimic the real G28 mount setup and is ideally paired with the East Crane EC-204 G-417 DMR, this mount setup will work on any platform with 20mm Picatinny rails and the included T1 mount has been sighted on MP5 and G36 platforms used by the German Armed Forces and Police. Whether you're replicating the real steel G28 or looking for a pair of unique mounts packaged together, the East Crane 20mm Picatinny Scope & Red Dot Mount for G-417 Replicas would be a slick setup for your primary!

If you're always bending your neck awkwardly to look down sights, the Novritsch High Red Dot & PEQ Box Mount V3 will cure that! This raised optic mount is patterned after real steel "Hydra" mounts, offering a raised mount for T1/T2 style red dot sights and a 20mm Picatinny rail for a PEQ/DBAL laser unit or scope camera. This mount is designed for 20mm Picatinny rails and includes a pair of "recoil lugs" on the bottom which hold it in place firmly on your rail. 

Constructed from CNC machined aluminium with steel mounting bolts, this mount fits the Novritsch Red Dot Sight V3, Vector Optics Maverick and Maverick Gen II, Vortex Sparc Solar and Holosun 403B. It should also fit most T1 and T2 clones provided they correctly replicate the real Aimpoint Micro mounting standard. Being slightly higher than a standard T1 mount, the High Red Dot & PEQ Box Mount V3 is ideal for those who have a hard time getting a clear sight picture using full face protection, being designed in the real world for use with respirators and night vision devices. 

If you like to keep your smile pretty by wearing lower face or full face protection, the Novritsch High Red Dot & PEQ Box Mount V3 will let you get on target without straining your neck!

If you are building your dream tactical AK, a railed dust cover can be a great addition to give you more optic mounting options, and the elite tactical look. The 5KU 20mm Railed Tactical AK Receiver Cover is designed to work with Z-Co style handguards and provides a 17-slot 20mm Picatinny rail on its upper surface, and a hinge mechanism which connects it to a Z-Co handguard for functionality similar to the ASK-74U, making battery changes a breeze for those who run a top wired AK. If you are working on your own Spetsnaz build, your AK needs this!

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This variant fits to Picatinny rail systems, locking with a grub screw on the top. These are much like standard rail covers, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This variant fits to Picatinny rail systems, locking with a grub screw on the top. These are much like standard rail covers, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

A 20mm RIS lower mounted point designed to stop the operator of the weapons' hand from sliding forward in front of the barrel. 

For a more robust and thick lighting solution, the K-2P is for those of you with more Russian inclined loadouts. Constructed from full alloy, the torch shines at a brilliant 800 lumens and is powered by 2 x CR123A batteries.

The torch is easily attached to your AK rail or 20mm Picatinny system and includes a remote pressure switch, which again can be easily attached to a rail right out of the box. Another inclusion is the offset mount, which allows you to forward mount your torch on the bottom rail to avoid casting a shadow if you are using a suppressor.

A set of Two Scope Rings for 25mm Optics, which easily attach to 20mm RIS/RAS Rail Systems to install your Rifle Scope on an Airsoft Gun. These rings are Low Profile, meaning your Scope will be mounted snugly to your Rail System. Keeping your scope close to your rail is good for seeing exactly where your BBs go after firing them.

Being a two-piece design, and coming included with an Allen Key, they are very easy to install. The scope rings mount to standard 20mm Picatinny rail sections. To attach them to your rifle scope you must use an Allen key to take off the top sections of the rings, then place your scope in and reattach the top sections of the rings. 

These scope rings are designed to hold an Airsoft rifle scope with a tube diameter of 25mm. Scope rings are useful as they allow you to attach your scope to very small sections of Picatinny rail, such as the small sections often found on sniper rifles. These mounts are High Profile, which means they will hold your Optic a little higher than standard, which is ideal for those who use Lower Face Protection and struggle to aim down their Scope. 

Being a two-piece design they are very easy to install. The scope rings mount to standard 20mm Picatinny rail sections. To attach them to your rifle scope you must use an Allen key to take off the top sections of the rings, then place your scope in and reattach the top sections of the rings. 

If you want to take full advantage of the incredible long-range performance of your Novritsch SSX23, the Novritsch 20mm Picatinny Slide Rail for SSX23 NBB will help! This aluminium 20mm Picatinny rail mount fits directly to the SSX23 slide, packaged with the correct screws to get it mounted straight away. This means you can fit a compact red dot sight to your SSX23, increasing long-range accuracy and target acquisition speed by removing the need to properly align the fibre optic sights. 

While you might not use them often with your red dot sight mounted, the fibre optic sights of the SSX23 are not obstructed when the rail is installed, meaning if your red dot battery runs out mid-firefight you can still land hits with ease!

An Aluminium constructed rail adaptor for KeyMod rail systems.

A 20mm RIS compatible raised scope mount ring, designed to raise up optics to your eye-level, or fit larger scopes onto your Airsoft guns.

If you're fed up with missing out on kills while you're busy reloading, the Action Army Mag Carrier Foregrip for 20mm Picatinny Rail should be in your sights! Constructed from high-density polymer with steel screws and nuts, this device functions as a foregrip for 20mm Picatinny rails and also holds a single AAP-01 or EU-series GBB pistol mag; on board the pistol and ready to be slapped in double time!

When installed, your spare magazine is retained by a left/right swappable mag catch, meaning left or right-handed users can set Mag Carrier Foregrip up to suit them perfectly. The set also includes a pair of 20mm Picatinny side rails so you don't have to ditch your tactical flashlight or laser to use this nifty device. Please note, if you're planning to use this with a standard AAP-01 Assassin you'll need the AAP-01 Advanced Pistol Rail Set to mount it and it doesn't quite fit the AAP-01C due to alignment with its built-in rail.

If you're running a primary pistol which takes EU-series mags and is rocking a 20mm Picatinny frame rail, the Action Army Mag Carrier Foregrip for 20mm Picatinny Rail will have you back online after a reload in seconds!

If you are rocking a KAR98k but you want some modern glass, this is a great way to get the job done! The 20mm Picatinny rail mount from Double Bell is designed to fit to their KAR98K sniper rifle and provide a 20mm rail above the receiver, allowing you to mount modern optical sights. The rail mounts into the rear sight mounting apparatus and provides you with 17 slots of 20mm rail, plenty to mount whatever you like. We advise against adding a PEQ, flashlight and T1 but it's your gun and there is enough space, just be ready to run if a reenactor spots you!

If you're running a red dot with magnifier setup and want a more comfortable neck position, the PTS Syndicate Unity Tactical FAST™ FTC OMNI Magnifier Mount will sort that out! This mount is designed for a wide range of magnifiers and clones, including those from EOTech, Vortex, Holosun, Sig Sauer and Trijicon (for detailed compatibility see the "Full Description").

Constructed from flawlessly machined CNC aluminium with a steel mounting bolt, this mount is unique in its FTC (Flip to Centre) configuration. This means when stowed, your magnifier won't hang off the side of your primary; instead, it pushes straight down to stow just below your primary optic, keeping the sides of your primary clean for reduced snag potential.

The Unity Tactical FAST™ FTC OMNI Magnifier Mount is set to position your magnifier at 2.26" from the rail to the centre of the optic (aka optical centreline), meaning you will in most cases require an equivalent height riser to align your red dot with your magnifier. Thankfully, PTS offers the FAST Riser, FAST MRO Mount and FAST Micro Mount to facilitate this.

Being higher over the rail than standard magnifier mounts makes this setup ideal for full-face mask users or those who run active hearing protection, avoiding the need for straining your neck to see down your sighting system. If you want the elite, modern look for your primary and plenty of perks to go with it, the PTS Syndicate Unity Tactical FAST™ FTC OMNI Magnifier Mount belongs on your gat!

If you're running a red dot with magnifier setup and want a more comfortable neck position, the PTS Syndicate Unity Tactical FAST™ FTC OMNI Magnifier Mount will sort that out! This mount is designed for a wide range of magnifiers and clones, including those from EOTech, Vortex, Holosun, Sig Sauer and Trijicon (for detailed compatibility see the "Full Description").

Constructed from flawlessly machined CNC aluminium with a steel mounting bolt, this mount is unique in its FTC (Flip to Centre) configuration. This means when stowed, your magnifier won't hang off the side of your primary; instead, it pushes straight down to stow just below your primary optic, keeping the sides of your primary clean for reduced snag potential.

The Unity Tactical FAST™ FTC OMNI Magnifier Mount is set to position your magnifier at 2.26" from the rail to the centre of the optic (aka optical centreline), meaning you will in most cases require an equivalent height riser to align your red dot with your magnifier. Thankfully, PTS offers the FAST Riser, FAST MRO Mount and FAST Micro Mount to facilitate this.

Being higher over the rail than standard magnifier mounts makes this setup ideal for full-face mask users or those who run active hearing protection, avoiding the need for straining your neck to see down your sighting system. If you want the elite, modern look for your primary and plenty of perks to go with it, the PTS Syndicate Unity Tactical FAST™ FTC OMNI Magnifier Mount belongs on your gat!

This Sight Mount from Vortex Optics is crafted from Aluminium and features a One-Piece design, with the exception of the top of the Mount Rings. It is designed for 30mm Optic Tubes and has a Center Height of 40.39mm / 1.59". The Cantilever design of the Mount makes it especially effective for installing Short Dot-style Optics to a flat-top Receiver such as the AR-15. Being made from Aluminium, it is lightweight and effective, but has been so well made it is covered by Vortex's VIP Lifetime Warranty.

If you're into cutting edge real steel kit, the PTS Syndicate Unity Tactical FAST LPVO Scope Mount Set should put a smile on your face! Made from 6000 series aluminium alloy machined using CNC technology to the high standards we all expect from PTS, this mount set is licenced by Unity Tactical and includes gorgeous trademarks across the design, furnishing anything it is mounted to with the elite, "gucci" look.

The set includes a dual ring mount designed to position the mechanical centreline of your scope at 2.05-inches above the rail, giving you a slightly higher mount than most. This is great for modern shooting stances and a fantastic feature for Airsoft skirmishers running lower face masks, giving you a more comfortable neck position so you can concentrate on landing those hits. Also included is an offset sight adapter, an RMR adapter plate and an Aimpoint Micro adapter plate, allowing you to run an offset back-up red dot sight without the hassle of sourcing the correct mounting hardware.

If you seek the versatility of an LPVO with an offset red dot sight and want a premium quality mount with slick licensed markings and everything you need to get set up included, the PTS Syndicate Unity Tactical FAST LPVO Scope Mount Set is the best option out there!