Guns Featuring RIS/RAS Rail

Specna Arms are at it again with an Airsoft replica of the AR36, a lightweight rifle featuring electric blowback no less, giving you a satisfying recoil with every shot and giving you that added realism.

The SA-G12 comes ready to rock straight out of the box, boasting 3 front handguard 20mm rails and a raised top rail for tactical accessories as well as a side folding stock for CQB use and fully ambidextrous controls. A rough and ready AEG for both new and veteran players alike!

This compact platform is exactly what you need for your close-quarters battles. It is short and lightweight, making it a great asset for those who like to stay nimble during their skirmishes. The Specna Arms SA-C21 CORE™ HAL¹ ETU™ M4/AR-15 AEG has an entry-level price point, with veteran-level potential!

This SA-C21 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring.

If you're in search of a close-quarters-optimised M4/AR-15 AEG on a budget, you've found one of the best options with the DA-C14-EGL CHARLIE™ 7" M-LOK M4/AR-15 AEG from Delta Armory! A lightning-fast density polymer build with an alloy outer barrel and steel sling plate, the DA-C14-EGL is also rocking the EAGLE™ programmable MOSFET inside, giving it advanced functionality way beyond its price point!

Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking, giving you an incredibly advanced M4 AEG for an entry-level price. Also inside is a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, giving the DA-C14-EGL far more long-range effect on target than one might expect for such a compact primary!

If you like to move fast and need a platform to match or you're a CQB specialist needing to cut tight corners, you're in great hands with the Delta Armory DA-C14-EGL CHARLIE™ 7" M-LOK M4/AR-15 AEG at your side. Packed with pre-upgraded parts and based on Tokyo Marui's proven internal design, the DA-C14-EGL is affordable, reliable and ready when you are!

An AR platform replica which is built from very tough High-Density Nylon Fibre Polymer, and features a MOSFET, Quick Change Spring and Microswitch Trigger, making this the absolute perfect Starter Gun.

Do you want a modern-looking rifle with a modern, advanced MOSFET which is also budget-friendly? If so, then you have come to the right place! The Delta Armory DA-C10-EGL CHARLIE™ 8" M-LOK SilentOps M4/AR-15 AEG is exactly that, boasting a similar style to the KS-1 military rifle, just shorter and with a compact suppressor on the front, making it perfect for CQB environments.

The DA-C10-EGL is similarly equipped internally to the original CHARLIE™ series, except the EAGLE™ ETU adds a whole new level of functionality. Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking. This is some seriously high-tech stuff for such a budget-friendly platform!

Do you want a modern-looking rifle with a modern, advanced MOSFET which is also budget-friendly? If so, then you have come to the right place! The Delta Armory DA-C10-EGL CHARLIE™ 8" M-LOK SilentOps M4/AR-15 AEG is exactly that, boasting a similar style to the KS-1 military rifle, just shorter and with a compact suppressor on the front, making it perfect for CQB environments.

The DA-C10-EGL is similarly equipped internally to the original CHARLIE™ series, except the EAGLE™ ETU adds a whole new level of functionality. Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking. This is some seriously high-tech stuff for such a budget-friendly platform!

Based on the iconic Steyr AUG carbine, this compact 6mm BB Airsoft gun is a lightweight and compact electrically powered replica AUG. Realistically constructed from polymer with an alloy front end, the AUG is supplied with an aluminium foregrip.

The Italian brand Evolution Airsoft has made a name for itself by providing pre-upgraded AEGs with superb quality externals, giving Airsofters what we always wanted; a gun we don't have to mess with! Though some live for the "thrill" of installing upgrades and hoping they work, for the rest of us, Evolution Airsoft has come through once again! The Smart Airsoft Gun series features the same impressive internals and rock solid externals as previous Carbontech AEGs, but with the new and improved ETS II installed.

If you're looking for a longer platform for outdoor skirmishing with no compromise when it comes to agility, check out the G&G Armament PRK9L Draco PCC AEG! Boasting full metal construction and a unique AK-based external design, the PRK9L is inspired by real steel Pistol Caliber Carbines popular in the 3-Gun competition sphere. Naturally, handling is impeccable, with all the ergonomic pitfalls of the AK truly cured, extended fire controls for speedy manipulation and an ultra-light extended M-LOK handguard well suited to modern shooting stances.

Inside, we're equipped with the proven G&G GT Advanced series internals, making the PRK9L 11.1V LiPo-ready straight out of the box. The gearbox shell is alloy and well-machined throughout, the 18:1 steel gearset runs on 8mm ball bearing bushings and the whole setup is driven by the renowned G&G Irfit 25K Orange high-speed motor, resulting in a super-snappy trigger response and way above average rate of fire. G&G's programmable MOSFET/ETU system also features inside, ensuring your electrical components run at maximum efficiency and offering the option to run 3-round burst mode instead of full auto.

As far as AK platforms go, the PRK9L is utterly unique, feeding from 9mm style magazines with sleek styling we're surprised an AK-derived design can pull off. If you need a real head-turner of a primary with killer performance and loads of accessory options, you can't go wrong with the G&G Armament PRK9L Draco PCC AEG!

If you're getting bored of the usual M4-shaped AEGs, who can blame you? The Cybergun FN Herstal MK16 SCAR-L 14.5-Inch AEG makes a nice change, boasting full metal construction and licenced trademarks from FN Herstal. Like the real thing, this detailed SCAR replica features ambidextrous fire controls, a monolithic upper receiver made from a single block of aluminium and an advanced multi-adjustable stock offering length of pull adjustment, an adjustable cheek riser and side folding functionality. Make no mistake, this is one of the best SCAR replicas out there when it comes to external quality!

Internally, the SCAR-L is based around VFC's version 2 gearbox, a modified design to allow for ambidextrous selector levers. Inside, we have 18:1 ratio steel gears running on 8mm ball-bearing bushings, reducing friction when compared to solid bushings for a smoother gearbox report when fired. The inner barrel is also a 6.04mm tightbore example, giving the FPS a slight boost thanks to improved air efficiency and improving accuracy potential with high-quality ammo. If you're dreaming of a beast of a SCAR build and want the best externals around, start with the Cybergun FN Herstal MK16 SCAR-L 14.5-Inch AEG!

If you're into retro loadouts and need the most authentic Mk 18 MOD 0 build around, you've just found it! The CYMA CGS Colt Mk 18 MOD 0 10.5" GBBR boasts official licencing from Colt via Cybergun and is a flawless replica of the original Mk 18, even down to the correct M16A1 lower receiver and 10.3-inch barrel setup.

Inside, the Mk 18 MOD 0 is significantly upgraded, packing a steel bolt carrier, steel trigger group parts, steel bolt catch and adjustable hammer; allowing you to tune power to get right within site limits. Also inside is a 6.03mm tightbore inner barrel, giving you an accuracy edge when compared to standard 6.08mm bores. Being based on the TM ZET system internal design, this thing will shoot like a beast, with even heavier recoil than the original TM!

If you want to ensure victory, you need this. The WELL PRO WE23-Plus Rotary Minigun is part of its "PRO" line of high-end AEGs. This Airsoft Minigun is constructed primarily from high-density polymer to keep the weight manageable, with 5 aluminium outer barrels braced with an aluminium ring at the tip. The Minigun feeds from 2800rnd spring-assisted high-capacity magazines which are wound by the internal motor of the Minigun itself, meaning you can spray and pray without worrying about winding every 3 seconds!

On the inside, Well has equipped this Minigun with the parts it needs to truly dominate the battlefield. The 5 inner barrels are all 6.03mm tight bores, granting a small increase in FPS and improved accuracy potential. The 5 HOP-up units are all independently adjustable, making use of a rotary design for each barrel to apply adjustments. The bearings are 8mm, meaning smooth running and low friction, and the Minigun is also compatible with standard AEG HOP-up buckings and inner barrels, just in case its performance isn't already enough for you!

The Well Minigun has the very real potential to change the game, with an incredible fire rate on an 11.1V LiPo battery and a monstrous 2800rnd magazine that winds itself. Miniguns have been around before, but this one is smaller, lighter and far more affordable than its rivals. If you have wanted a taste of the Minigun life but held off for one reason or another, with the Well Minigun in your hands you will be happy you waited!

A Gas Blowback 6mm BB Airsoft Pistol, designed and based off the M1911 Pistol which was modified by the US Army and is in use today. The Pistol is constructed with an Alloy Frame, Slide, Internals and Magazine with a Rubberised Grip.

Are you looking for a reliable M4 to help you in your skirmishes, or maybe you're a veteran looking for an affordable AEG to pimp out with your own upgrades, if so, the Specna Arms SA-C25 CORE™ HAL¹ ETU™ M4/AR-15 AEG is exactly what you're searching for! It's more compact than the original SA-C25 with its PDW stock, perfect for staying versatile on the battlefield.

This SA-C25 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for a beginner-level price point!

If you're new to Airsoft and want to start with something a bit more advanced than the average M4, the Delta Armory DA-C02-ETU CHARLIE™ M4/AR-15 CQBR AEG should suit your needs! This M4 CQBR AEG is constructed primarily from high-density polymer, just like the original DA-C02, but unlike the original, this version is rocking the ALPHA™ ETU series internals, flawlessly marrying a lightweight and agile build with a lightening fast trigger response and the ability to program the trigger for binary trigger or burst mode.

The ETU isn't the only thing added to the DA-C02-ETU; we are also treated to 16:1 ratio CNC steel gears, CNC aluminium cylinder group parts, a 6.03mm tightbore inner barrel with a high torque Neodymium magnet motor to top it off. The result is a surprising trigger response and intense rate of fire, usually reserved for AEGs twice this price! If you want all of the performance but none of the weight of the Delta Armory ALPHA ETU series, the DA-C02-ETU CHARLIE™ M4/AR-15 CQBR AEG provides exactly that!

If you held off on the original WE06 PPK-20 because of its lack of steel, the WELL PRO WE06 PPK-20 Compact SMG AEG w/ Eshooter MOSFET; Full Metal is the one to go for! Based on the most recent prototype of the PPK-20 SMG, an AK-derived SMG design, the WE06 boasts both M-LOK and 20mm Picatinny accessory attachment interfaces, ambidextrous fire controls and a side folding retractable stock based on that of the AM-17, another advanced Kalashnikov Concern prototype.

This, being the "full metal" version is also rocking a steel flash hider and a steel trunnion block along with a stamped steel receiver and top cover, giving it the appropriate hefty feel for the authentic replica experience. Inside, we have a unique version 3 gearbox-derived shell with a quick change spring system, a steel 18:1 ratio gearset running on 8mm slide bearings, a type 2 cylinder, a polymer piston with a full rack of steel teeth and an EShooter programmable MOSFET to top it off. The EShooter 'FET provides electrical efficiency improvements, battery protection and cycle completion along with programmable fire modes and adjustable pre-cocking. If you love the styling of the WE06 PPK-20 Compact SMG but have been waiting for the full metal version, here you go!

If you like the looks and ambidextrous functionality of the ARCTURUS E3 Rifle but you prefer a shorter package, the E3 Carbine is the same thing but with a 10.5-inch outer barrel, making it ideal for close-quarters use, and those who like to play aggressively and close ground with the enemy! Like the E3 Rifle, the E3 Carbine boasts full metal construction, well thought out pre-upgraded ARCTURUS internals, an intimidating looking compensator and M-LOK/Picatinny hybrid handguard up front.

The impressive internal spec includes a 6.03mm steel tightbore inner barrel, rotary HOP-up unit, microswitch trigger and a thoughtfully built gearbox with low friction components. The E3 Carbine is perfect for any aggressive player who wants all the options when it comes to accessories, and will make use of the wealth of QD sling points across this modern M4/AR-15 platform!

If CQB is your poison, or you have limited space in your kit bag, you are going to love this one! The CM.106 AR-9 PDW from CYMA adds to the increasingly wide range of AR-9 platforms available, making the decision on which platform to go for that much harder! The CM.106 PDW sports full metal construction, a pre-installed electronic trigger unit with MOSFET, a high-speed motor, and internals which have been upgraded even beyond the already impressive "Platinum" internal setup.

If you have a thing for modernised American AKs, this one should be up your street! The EMG Rifle Dynamics RD-701 AEG; Kestrel Basic ETU is absolutely packed with pre-upgraded internal parts and boasts licensed trademarks from Rifle Dynamics with detailed replica Rifle Dynamics parts across the design. Boasting some incredible pre-upgraded parts from the CYMA Platinum Edition rifles, this AK variant is absolutely devasting in-game and to make matters all the sweeter is equipped with an internal tracer unit mounted to the HOP-up and powered by the AEG's battery.

The tracer HOP-up is a rare addition to stock Airsoft rifles, usually a rare innovation only found on the aftermarket and requiring a certain amount of expertise to wire in. An impressive feature made even better in combination with this RD-701's other upgraded parts and flawless build quality. The RD-701 boasts full metal construction with a large proportion of steel in the build, a 6.03mm tightbore inner barrel, a high-speed Neodymium magnet motor and much, much more!

so, if you fancy treating yourself to an AK platform, the EMG Rifle Dynamics RD-701 AEG is a great high-performance option, plus, its party trick of lighting up tracer BBs without an aftermarket tracer unit required!

A Gas Blowback Airsoft Pistol designed by WE designed with an ergonomic grip giving you a strong hold on your pistol during use.

This Airsoft Electric Gun is a perfect choice for any kind of player, from absolute beginner all the way up to seasoned pro. Thanks to an absolute tonne of features and up-rated internals, this Airsoft Replica offers incredible value for money out the box. With features like a 6.01mm Inner Barrel, Reinforced Steel Gears, Rotary HOP Unit, Quick Remove Spring Guide and more, all for the price of a CM16 Raider, the Evolution Airsoft Recon S Carbontech w/ Superlite Carbontech™ KeyMod Rail System is absolutely ideal.

This Airsoft Electric Gun is a perfect choice for any kind of player, from absolute beginner all the way up to seasoned pro. Thanks to an absolute tonne of features and up-rated internals, this Airsoft Replica offers incredible value for money out the box. With features like a 6.01mm Inner Barrel, Reinforced Steel Gears, Rotary HOP Unit, Quick Remove Spring Guide and more, all for the price of a CM16 Raider, the Evolution Airsoft Recon S Carbontech w/ Superlite Carbontech™ KeyMod Rail System is absolutely ideal.

If you want something a bit more stylish as a sidearm, VORSK must have come to your attention by now! The EU18 Gold Match GBB pistol follows the usual VORSK formula of taking a tried and tested GBB pistol design and spicing it up with some key aesthetic changes. The EU18 Gold Match follows the same external design as its EU18 Solid slide but with matt gold accents, making the pistol stand out and giving it the classy looks of a decked-out race gun.

As with VORSK's other EU-series offerings, the EU18 Gold Match is compatible with common EU series magazines from VORSK, RAVEN or WE and is kitted out with a 6.03mm tightbore inner barrel straight out of the box, promising improved accuracy potential and a slight raise in FPS when compared to its rivals. If you seek a more elegant looking EU series which sidesteps the usual pedestrian EU series looks, the EU18 Gold Match would be a fine choice!

If you're into firearms of recent times, you'll love the Delta Armory DA-C010 AEG! It has similar styling to the current military KS-1 rifle, just half the size and a compact suppressor on the front, making it perfect for CQB environments. On the outside, the DA-C10 is made primarily from high-density polymer with an M-LOK handguard, 14mm CCW threaded barrel, and 20mm Picatinny railed receiver, ready to be kitted out!

Inside the DA-C10 is a 6.03mm tightbore inner barrel paired with a rotary HOP-up, offering superb performance at long range and the ability to tune for different ammo weights. If you're after a low-cost, high-performance M4/AR-15 platform which is ready to rock with the most modern accessories, the Delta Armory DA-C10 CHARLIE™ 8" M-LOK SilentOps M4/AR-15 AEG is an excellent choice!

If you are keeping your eye out for an M4 platform AEG which combines low weight with a long barrel for superb outdoors performance you can put it back in again, you have found a great option! The CM.612 from CYMA sports the usual rock solid internals from the CM.6xx M4 series but with a 16 inch outer barrel and the gorgeous KAC style URX-2 quad rail system to give it a dynamic and high speed look. The CM.612 would be an asset in an outdoors skirmish thanks to its long 6.03mm tightbore inner barrel, offering accuracy and range which is unattainable for shorter setups. If you do the majority of your Airsoft *beep* whipping in the woods, this AEG would suit you well.

A gas blowback 6mm Airsoft BB Gun, based on the Hi-Capa 3.8 range this is a custom pistol designed to look as unique and modern as possible whilst still retaining all of its key features.

If you need a compact and lightweight AEG with no build-quality compromises, the Evolution Reaper XS EMR AR-9 SMG AEG; ETS II ETU is one to watch! Made from aluminium and CarbonTech engineering polymer on the outside, this agile little beast feels fantastic in the hands and is pre-fitted with the Evolution ETS II programmable MOSFET/ETU, allowing for alternate fire modes such as burst modes of various durations, binary trigger and much more. Also inside is a 6.01mm tightbore inner barrel paired with a rotary HOP-up unit, giving this compact menace respectable performance at long range.

On the outside, the Reaper XS is rocking an M-LOK handguard, 14mm CCW male threaded outer barrel and 20mm Picatinny railed receiver, making it ready to hit the field dressed up with almost any combination of accessories you choose, including tracer units, vertical or angled grips, optical sights, flashlights and aiming lasers. Whether you need a platform to give you the edge in CQB or you prefer a short and light primary to maintain your high agility, the Evolution Reaper XS EMR AR-9 SMG AEG; ETS II ETU is ideal!

Luxury meets GLOCK, that's how the PTS Syndicate OZ9 "Premium Combat" GBB Pistol can be described! If you need something ridiculously fancy, this pistol is perfect for you. Constructed from high-density polymer and 7075 aluminium, a.k.a the same stuff used in aerospace travel!

If you know about the real steel pistol, you will know its unique feature, which the Airsoft variant also has. The unique feature is the modular aluminium frame, integrated fire control unit and polymer grip that can be swapped out via a single takedown pin, making future modifications and maintenance a breeze!

If you're in search of a pistol that's absolutely worth bragging about, you have found it with the PTS Syndicate OZ9 "Premium Combat" GBB Pistol!

If you're into the 416 vibe but want something more modern and swift to point, the Specna Arms SA-PH22 PRIME™ M-416 RAHG 14.5" AEG is one to watch. Part of Specna's impressive PRIME™ range, the SA-PH22 is packed with pre-upgraded parts and designed to compete with the very best Airsoft has to offer, with no need for additional upgrades or tuning. Some of these upgrades include a powerful Dark Matter™ brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings, CNC aluminium cylinder group parts and a reinforced tappet plate for reliable feeding.

The PRIME™ is Specna's newest line of AEGs. They have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to enhance performance, improve consistency and increase rate of fire. The highlight of this AEG is the option to choose either the Gate ASTER II Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and offering programmable firing modes. Which you choose depends on your needs; the ASTER II is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL version is great for users who prefer an easier-to-use yet still advanced MOSFET!

A sleeker, more agile alternative to the hefty quad-rail equipped 416, the Specna Arms SA-PH22 PRIME™ M-416 RAHG 14.5" AEG is certain to turn heads on the field, even more so when you shoot it! If you're after an ultra-modern AR setup with pre-upgraded internals to rival the best, the SA-PH22 is the ideal choice!

If you're into the Daniel Defense look but want something a bit different, check out the EMG Daniel Defense DDM4® V7 AEG! Based on the real steel DDM4 V7P, this M4/AR-15 AEG is rocking a unique folding stock adapter inspired by the real steel LAW Tactical folding stock, meaning it can fit into smaller gun bags and can cut corners tighter than other ARs, ideal for CQB!

Up front, we have a fantastic replica of the real steel DD MRF 9.0, a dynamic free-floated M-LOK handguard made from CNC aluminium and bristling with licenced Daniel Defense trademarks. The receiver also sports finely engraved DD markings and is equipped with the EMG Alpha 19 ergonomic grip, a comfortable grip design made from superb quality high density polymer. 

Inside, we have the APS Silver Edge II gearbox, a V2 gearbox equipped with 18:1 CNC steel gears, a polymer piston with a full steel tooth rack, a double O-ring cylinder head and stainless steel cylinder. The spring guide is a quick change example, allowing for easy power tuning, and the motor is a 24K high torque, meaning a snappy response rate and respectable rate of fire. Also inside is the APS Micro-FET, an in-line MOSFET designed to prevent trigger lockups and improve electrical efficiency, translating into even more speed downrange. 

Whether you have limited space, like folding things or want a licenced Daniel Defense AR AEG which no-one else has, the EMG Daniel Defense DDM4® V7 AEG should be in your sights! Well equipped both inside and out with a super unique folding stock no other AR has, the DDM4 V7 is the MK18's dynamic-looking, speedy brother!