Specna Arms Airsoft

If you want to breathe new life into your AEG in the form of speed and torque, the Specna Arms BLDC Brushless Motor; Long is calling your name! The BLDC motor is the affordable option in Specna Arms' new brushless motor lineup, offering the same benefits as the top-end DARK MATTER™ motors with a more economical cast aluminium housing. This variant is the 27K option, offering 27,000 revolutions per minute, plenty for a high-speed build but also an asset to any DMR build requiring a high torque solution.

Brushless Motors boast lower heat build-up, higher torque-to-weight ratio, improved reliability via reduced friction and significantly reduced operating noise when compared to conventional brushed motors. This, the "long shaft" variant is designed for M4/AR-15 derived AEGs, G3, SMG-5 and P90 AEGs and is a relatively simple install job, though you may need to reinforce other parts to cope with the impressive torque and speed delivered by the BLDC motor.

If you're upgrading your M4, G3, SMG-5 or P90 AEG and seeking more speed for a higher rate of fire or more torque for a better trigger response and the ability to pull strong DMR springs, the BLDC Brushless Motor from Specna Arms is the ideal affordable option!

If you're looking for spare batteries for your EMG JW3 AEP, this Specna Arms Gens Ace 7.4V 25C 620mAh G-Tech battery for AEPs is ideal! A 7.4V 2S LiPo with 620mAh capacity, this battery is pre-wired to a mini-Deans connector and a G-Tech balance plug. The G-Tech balance plug allows you to charge this battery on either a standard LiPo balance charger or the advanced G-Tech Charger from Gens Ace.

During our testing, we found this battery to be an incredibly tight fit in most AEPs, so we only recommend it for the EMG CM.138 JW3 AEP. Please note, if you do attempt to install this battery on other AEPs, it is likely you will damage the outer coating, which will invalidate your warranty. If you need to keep your JW3 AEP in the fight for longer, the Specna Arms Gens Ace 7.4V 25C 620mAh G-Tech battery for AEPs is the way to go!

The Specna Arms SA-C22 CORE™ HAL¹ ETU™ M4/AR-15 Carbine AEG is the perfect beginner Airsoft rifle, with its preinstalled MOSFET, it is sure to outperform other platforms at a similar price point. This M4/AR-15 AEG follows Specna's "CORE" build standard, featuring a CNC aluminium handguard, alloy outer barrel and suppressor paired with a high density polymer receiver, stock and pistol grip, ideal for skirmishers who like to move fast and maintain high-energy skirmishing all day long.

This, the latest version of the SA-C22 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for a beginner-level price point!

The Specna Arms MP133 Flash Hider - 14mm CCW matches the design of real steel flash hiders. It is constructed from steel, making it extremely durable and sure to withstand any skirmish. It mounts to 14mm CCW threading, commonly found on most Airsoft assault rifles. To attach it, simply twist it onto your rifle's outer barrel, and then you're good to go! It features a very aggressive design that will make any platform ten times more aggressive.

It may be compatible with some QDC suppressors; however, this cannot be guaranteed. If you want a super aggressive flash hider for your Airsoft platform, the Specna Arms MP133 Flash Hider is the one for you!

If you're kitting out your M-LOK handguard, the Specna Arms SAAS M-LOK Angular Front Grip is a solid foregrip option! Made from lightweight aluminium, this innovative foregrip includes a built-in QD sling socket on the rear facing the shooter, saving space to make your M-LOK slots go that bit further!

The contact surface of the SAAS Angular Front Grip is serrated for maximum traction in any weather conditions and includes an integral hand stop to prevent your hand from going past the handguard and into the danger zone. If you're after an angled foregrip for M-LOK and you also need a QD sling point, the Specna Arms SAAS M-LOK Angular Front Grip is your perfect combination!

If you're bored with your current stock and seek a change, the Specna Arms Adjustable Tactical Stock for M4/AR-15 is the style-up your gat needs! Made from strong, high-density polymer with a high-quality textured finish, this stock is based on an evolution of the OG "Crane" stock, also known as the SOPMOD stock.

Like the Crane, the Adjustable Tactical Stock features sloped cheek rests for a comfortable cheek weld when looking down sights, but unlike the Crane, this is a slimline stock with no internal battery compartment. This means if you're installing this on a rear-wired M4 AEG, you'll need to use your buffer tube to store your battery.

Also on board the Adjustable Tactical Stock is a pair of steel QD sling sockets and two "footman loop" sling slots, ready for whichever sling solution you opt for, whether modern or old-school. The butt plate is made from grippy rubber, ensuring it won't slip off your shoulder in wet weather or when you're rocking a plate carrier. Available in several colour options to suit any aesthetic taste, the Specna Arms Adjustable Tactical Stock for M4/AR-15 is a great way to make your M4/AR-15 truly yours!

If you're bored with your current stock and seek a change, the Specna Arms Adjustable Tactical Stock for M4/AR-15 is the style-up your gat needs! Made from strong, high-density polymer with a high-quality textured finish, this stock is based on an evolution of the OG "Crane" stock, also known as the SOPMOD stock.

Like the Crane, the Adjustable Tactical Stock features sloped cheek rests for a comfortable cheek weld when looking down sights, but unlike the Crane, this is a slimline stock with no internal battery compartment. This means if you're installing this on a rear-wired M4 AEG, you'll need to use your buffer tube to store your battery.

Also on board the Adjustable Tactical Stock is a pair of steel QD sling sockets and two "footman loop" sling slots, ready for whichever sling solution you opt for, whether modern or old-school. The butt plate is made from grippy rubber, ensuring it won't slip off your shoulder in wet weather or when you're rocking a plate carrier. Available in several colour options to suit any aesthetic taste, the Specna Arms Adjustable Tactical Stock for M4/AR-15 is a great way to make your M4/AR-15 truly yours!

If you're bored with your current stock and seek a change, the Specna Arms Adjustable Tactical Stock for M4/AR-15 is the style-up your gat needs! Made from strong, high-density polymer with a high-quality textured finish, this stock is based on an evolution of the OG "Crane" stock, also known as the SOPMOD stock.

Like the Crane, the Adjustable Tactical Stock features sloped cheek rests for a comfortable cheek weld when looking down sights, but unlike the Crane, this is a slimline stock with no internal battery compartment. This means if you're installing this on a rear-wired M4 AEG, you'll need to use your buffer tube to store your battery.

Also on board the Adjustable Tactical Stock is a pair of steel QD sling sockets and two "footman loop" sling slots, ready for whichever sling solution you opt for, whether modern or old-school. The butt plate is made from grippy rubber, ensuring it won't slip off your shoulder in wet weather or when you're rocking a plate carrier. Available in several colour options to suit any aesthetic taste, the Specna Arms Adjustable Tactical Stock for M4/AR-15 is a great way to make your M4/AR-15 truly yours!

If you're a fan of the most menacing military firearms, you'll definitely love the Specna Arms SA-G01 ONE™ M4A1 w/ M203 Launcher; Kestrel Basic ETU! This full metal M4A1 replica includes a barrel-mounted M203 40mm MOSCART grenade launcher pre-installed, giving you extra in game firepower and the beastly looks only a rifle with an underslung launcher can provide. Building on the original SA-G01, this variant is equipped with the Kestrel Basic ETU from Eshooter, offering plenty of features most would consider a significant step above "basic"!

The Kestrel Basic offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. The Kestrel keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. Also inside is a 6.03mm tightbore inner barrel and rotary HOP-up unit, bringing the latest iteration of the ONE™ series into line with EDGE™ and EDGE 2.0™ platforms with improved accuracy potential and the latest HOP-up unit design for M4 AEGs.

If you're planning on taking on an active-camo-clad alien or are seeking the Lone Survivor (2013) look, the SA-G01 ONE™ M4A1 w/ M203 Launcher; Kestrel Basic ETU is the ideal primary. There is nothing quite as satisfying as showering a bunker with an underslung launcher!

If you're a skirmisher who prioritises style, the Specna Arms SA-V26 ONE™ Red Edition M4/AR-15 LVOA AEG; Kestrel Basic ETU should suit you perfectly! This is the latest version of the SA-V26 Red Edition, with thoroughly revamped internals to keep it competitive with the latest Airsoft releases. The most prominent change is the addition of the Eshooter Kestrel Basic ETU, offering plenty of slick functionality previously reserved for far more expensive, high end replicas.

The Kestrel Basic offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. The Kestrel keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. Also inside is a 6.03mm tightbore inner barrel and rotary HOP-up unit, bringing the latest iteration of the ONE™ series into line with EDGE™ and EDGE 2.0™ platforms with improved accuracy potential and the latest HOP-up unit design for M4 AEGs.

If you love an AR that stands out, rocking a customised look straight out of the box, the SA-V26 ONE™ Red Edition M4/AR-15 LVOA AEG; Kestrel Basic ETU is exactly that. An impressive reinvention of a popular previous release with the latest tech inside, this is the AR platform for skirmishers with a sense of style!

If you're after cheap and cheerful eye protection which doesn't compromise on quality, the Pheos One Safety Glasses from Specna Arms should be in your sights. Made by Uvex Safety and rated EN166 FT for low energy impacts, these glasses should keep your eyes safe from incoming fire, but we recommend adding a retention strap if they sit loosely on your head.

Equally useful for target shooting with an Air Rifle or working with power tools, these protective glasses are a comfortable wrap-around design with rubberised gripping sections on the arms to keep them firmly planted. Whether you're a tinkerer who wants to stay safe while dremelling or an Airsofter enthusiast seeking affordable, impact-rated glasses, Specna's Pheos One Safety Glasses are the perfect choice!

Have you got an inner barrel too long for the rest of your Airsoft platform? If so, then you need this exact suppressor! The Specna Arms 14mm CCW/CW Covert Tactical Silencer is constructed from aluminium and has 14mm CCW threads at one end, with 14mm CW threads at the opposite end. This simple suppressor is very light, making it suitable for GBB pistols without compromising gas efficiency too much.

This version of the Specna Arms suppressor has text on it which reads "I NEED TO HIDE AN INNER BARREL", making it great for rifles which come with polymer mock suppressors already installed, as these platforms often have extended inner barrels. It's also just the perfect bit of British dry humour that will definitely be appreciated on the battlefield.

If you want to give your primary a sneaky look, a suppressor is the way to go! The Specna Arms Covert Tactical Silencer is constructed from aluminium and has 14mm CCW threads at one end, with 14mm CW threads at the opposite end. This simple suppressor is very light, making it suitable for GBB pistols without compromising gas efficiency too much.

This version of Specna's silencer is the "Brrrrt" version, marked with "BRRRRRRRRT" on the outside in stylised text. This suppressor is ideal for A10 Warthog fans, minigun fans or anyone whose primary is appropriately fast!

Have you got an inner barrel too long for the rest of your Airsoft platform? If so, then you need this exact suppressor! The Specna Arms 14mm CCW/CW Covert Tactical Silencer is constructed from aluminium and has 14mm CCW threads at one end, with 14mm CW threads at the opposite end. This simple suppressor is very light, making it suitable for GBB pistols without compromising gas efficiency too much.

This version of the Specna Arms suppressor has text on it which reads "I NEED TO HIDE AN INNER BARREL", making it great for rifles which come with polymer mock suppressors already installed, as these platforms often have extended inner barrels. It's also just the perfect bit of British dry humour that will definitely be appreciated on the battlefield.

Infinitely functional and incredibly comfortable. Dubbed the Light Ops Stock, Specna Arms takes the rear of your rifle to the next level. This stock will attach to any buffer tube and will function far better than your stock (no pun intended) rear piece.

With a rubberised butt plate for comfort when held against your person, this stock goes even further. This stock also has the genius feature of having rubberised cheek rests on either side, not only to provide additional comfort, but also to provide extra friction so when your Aiming down your sights your less likely to slip, allowing you to maximize your confirmed kill potential in the field.

The Light Ops Stock really lives up to its name, being constructed from lightweight polymer, which won't compromise the weight ratio of your rifle. Being a PDW stock, it is extremely slimline, making your rifle better suited for fast past close-quarters style gameplay. The cheek piece of the stock is cylindrical, avoiding potential snags and has rubberised sections on either side with Specna Arms "SA" texture to provide a positive and comfortable cheek weld.

Infinitely functional and incredibly comfortable. Dubbed the Light Ops Stock, Specna Arms takes the rear of your rifle to the next level. This stock will attach to any buffer tube and will function far better than your stock (no pun intended) rear piece.

With a rubberised butt plate for comfort when held against your person, this stock goes even further. This stock also has the genius feature of having rubberised cheek rests on either side, not only to provide additional comfort, but also to provide extra friction so when your Aiming down your sights your less likely to slip, allowing you to maximize your confirmed kill potential in the field.

The Light Ops Stock really lives up to its name, being constructed from lightweight polymer, which won't compromise the weight ratio of your rifle. Being a PDW stock, it is extremely slimline, making your rifle better suited for fast past close-quarters style gameplay. The cheek piece of the stock is cylindrical, avoiding potential snags and has rubberised sections on either side with Specna Arms "SA" texture to provide a positive and comfortable cheek weld.

Infinitely functional and incredibly comfortable. Dubbed the Light Ops Stock, Specna Arms takes the rear of your rifle to the next level. This stock will attach to any buffer tube and will function far better than your stock (no pun intended) rear piece.

With a rubberised butt plate for comfort when held against your person, this stock goes even further. This stock also has the genius feature of having rubberised cheek rests on either side, not only to provide additional comfort, but also to provide extra friction so when your Aiming down your sights your less likely to slip, allowing you to maximize your confirmed kill potential in the field.

The Light Ops Stock really lives up to its name, being constructed from lightweight polymer, which won't compromise the weight ratio of your rifle. Being a PDW stock, it is extremely slimline, making your rifle better suited for fast past close-quarters style gameplay. The cheek piece of the stock is cylindrical, avoiding potential snags and has rubberised sections on either side with Specna Arms "SA" texture to provide a positive and comfortable cheek weld.

The Specna Arms SA-C17 CORE™ HAL¹ ETU™ M4/AR-15 AEG is beautiful. It features Strike Industries licensing on its unique M-LOK handguard, adding to the realism of this mighty fine platform. Its compact nature makes it perfect for close-quarters battles, a versatile and lightweight replica which can be easily manoeuvred around the battlefield is exactly what you need to win!

This SA-C17 is rocking Specna's HAL¹ ETU, it boasts programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for a super affordable Airsoft gun!

This rifle is large and in charge! The Specna Arms SA-B16 ONE™ Mk 12 MOD.1 AEG; Kestrel Basic ETU is a big Airsoft rifle based on the Navy's real steel MK 12 MOD.1 Special Purpose Rifle. This rifle is ready for both assault rifle and DMR duties straight out of the box. The Kestrel Basic MOSFET offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection.

Inside the Specna Arms SA-B16 ONE™, there are some incredible straight-out-of-the-box internals. It features a Kestrel Basic ETU, 18:1 ratio steel gears running on 8mm ball bearing bushings and a reinforced gearbox shell with an Enter & Convert™ quick change spring guide. This allows you to change the spring without having to open the gearbox itself. Also inside is a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, getting you off the mark with above-average accuracy potential and a slight FPS boost.

If you need something for busting bunkers or you are hunting an alien lifeform with active camouflage and thermal vision, an M4 with M203 grenade launcher is what you need to get the job done! This bundle combines the SA-G01, a full metal M4 AEG with an M203 40mm grenade launcher pre-installed with a pair of NUPROL 40mm MOSCART Gas Grenades and a big ol' bag of Delta Armory BBs.

"This gun will make you a god damned sexual Tyrannosaurus, just like us!"

If you need more ammo on tap and ain't got time to reload, the Specna Arms 380rnd S-Mag High-Cap Magazine for M4/AR-15 AEG is what you need to fill your rig up! This wheel-wound high-cap magazine holds a respectable 380 BBs, loaded through the fill window at the top and fed into your M4/AR-15 AEG via the winding wheel on the baseplate. Simply open the BB fill window door, pour your BBs in and wind the wheel 10-15 times, after which you are ready to shoot.

Like the S-Mag mid-cap, the high-cap variant is constructed from high density polymer and boasts SA texture on each side to improve wet weather handling. If you want to spend more time shooting and less time reloading, the S-Mag high-cap will perfectly suit your needs!

If your playstyle prioritises stealth and mobility, this is the bundle for you! The Sandy Sneak Beginner Bundle pairs the Specna Arms SA-FX01 FLEX™ AR-9 with the Big Dragon SF Style suppressor in desert bronze, a 7.4V Stock Tube LiPo Battery, a Balance Charger and some 0.25g BBs, giving you everything you need to get stuck in bar your choice of eye protection.

The SA-FX01 represents previously unheard-of value for money, boasting far more than its fair share of pre-upgraded parts, a slick and modern M-LOK handguard and the Specna Arms Light Ops Stock in the increasingly popular AR-9 shape. Installing the Blackwater Suppressor is as simple as unscrewing the pre-installed birdcage flash hider and screwing the suppressor on in its place.

The Sandy Sneak bundle will equip you well for both indoor and outdoor skirmishing, but if you need a couple of spare mags, check them out here!

If you're into the 416 vibe but want an AEG you'll never need to upgrade, the Specna Arms SA-PH20 PRIME™ M-416 10" AEG is the way to go! Based on the original 416 with its 20mm Picatinny quad rail handguard, this full metal AEG is packed with pre-upgraded parts the likes of which you won't find in other out-of-the-box Airsoft guns. Some of these upgrades include a powerful Dark Matter™ brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding at high speeds.

The PRIME™ is Specna's newest line of AEGs. They have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG is the option to choose either the Gate ASTER II Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and offering programmable firing modes. Which you choose depends on your needs; the ASTER II is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL version is great for users who prefer an easier-to-use yet still advanced MOSFET!

If you're working on a special forces loadout or a GWOT DEVGRU kit, this is practically the perfect primary! With solid build quality, pre-upgraded internals leaps and bounds ahead of the rest and advanced technology inside, the Specna Arms SA-PH20 PRIME™ M-416 10" AEG ticks all the boxes!

If you're into the 416 vibe but want an AEG you'll never need to upgrade, the Specna Arms SA-PH20 PRIME™ M-416 10" AEG is the way to go! Based on the original 416 with its 20mm Picatinny quad rail handguard, this full metal AEG is packed with pre-upgraded parts the likes of which you won't find in other out-of-the-box Airsoft guns. Some of these upgrades include a powerful Dark Matter™ brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding at high speeds.

The PRIME™ is Specna's newest line of AEGs. They have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG is the option to choose either the Gate ASTER II Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and offering programmable firing modes. Which you choose depends on your needs; the ASTER II is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL version is great for users who prefer an easier-to-use yet still advanced MOSFET!

If you're working on a special forces loadout or a GWOT DEVGRU kit, this is practically the perfect primary! With solid build quality, pre-upgraded internals leaps and bounds ahead of the rest and advanced technology inside, the Specna Arms SA-PH20 PRIME™ M-416 10" AEG ticks all the boxes!

If you need bigger mags on your AK, the Specna Arms S-Mag High-cap is a great shout. The S-Mag is constructed from high-density polymer with unique SA texture on the outside to add traction for improved wet weather handling. This is a wheel-wound high-cap magazine, meaning it holds an absolutely epic 430 BBs and needs to be wound periodically via the winding wheel on the baseplate.

To load the S-Mag High-cap, simply open the fill port on the top of the magazine and pour your BBs in. Once filled, wind the wheel on the baseplate 5-10 times, load it into your AK and get busy. This magazine is ideal for the Specna Arms J-series but should also fit in most other AK AEGs. 

Built by Specna Arms as part of their G11 series of AR36 clone rifles, but this one has a difference. Not only does it have a non-standard KeyMod handguard, but also features an internal electronic blowback system which gives the AEG a more exiting firing experience with a bit of recoil for enhanced realism.

With the release of the J Series from Specna Arms comes their line of J Series Mags. If you own a J series and need some spare mags to go with your new beauty, you've come to the right place. Even if you don't own a J Series and fancy yourself a new ultra modern magazine, you'd be hard pressed to find a better mag than this.

This magazine is a high cap variant, meaning that it can hold up to a massive 430 rounds. The magazine is filled at the top using a speedloader and loaded by winding the wheel at the bottom for super quick reloads to stay in the fight.

The magazine is constructed from high density polymer and features a matte colour and a somewhat rough texture with additional friction for a satisfying feel and for ease of loading. On either side of the mag you can see a modern checked texture for the modern battlefield.

This is for a pack of 5 magazines for the player who sees nonstop action!

With the release of the J Series from Specna Arms comes their line of J Series Mags. If you own a J series and need some spare mags to go with your new beauty, you've come to the right place. Even if you don't own a J Series and fancy yourself a new ultra modern magazine, you'd be hard pressed to find a better mag than this.

This magazine is a high cap variant, meaning that it can hold up to a massive 430 rounds. The magazine is filled at the top using a speedloader and loaded by winding the wheel at the bottom for super quick reloads to stay in the fight.

The magazine is constructed from high density polymer and features a matte colour and a somewhat rough texture with additional friction for a satisfying feel and for ease of loading. On either side of the mag you can see a modern checked texture for the modern battlefield.

This is for a pack of 5 magazines for the player who sees nonstop action!

If you fancy customising your M4 AEG or enhancing its handling, the Specna Arms M-416 Pistol Grip for M4/AR-15 AEGs is a fantastic, affordable option. Made from robust high-density polymer with a design inspired by the real steel M-416 rifle, this pistol grip is far more comfortable than most and adds the elite look to your primary as a bonus!

Compatibility-wise, this grip should fit on most M4/AR-15 AEGs but will require some expertise to install. If you want to freshen up the look of your setup or your current pistol grip doesn't work for you, the Specna Arms M-416 Pistol Grip for M4/AR-15 AEGs is worth a shot!

Need more stability for long-range shots? The Specna Arms Spring Loaded Bipod for Harris Lug will do the trick! Designed to mount to a Harris-style sling/bipod Lug by twisting the thumbscrew on the base so that a pair of 'pincers' will grab onto the Lug, then tightening it down for a firm fit, this bipod is ideal for milsim sniper rifle setups!

The Bipod has spring-loaded legs which can be extended to full length by pressing the button for each leg. Once deployed, you can adjust them between 6 different levels of extension. Each leg can be adjusted independently, allowing you to set your rifle up on uneven ground. When not in use, you can easily fold the legs back into place by hand, with no fiddly catches to defeat while you're pumped with adrenaline. The Rubber Feet on the bottom of each Leg make any Rifle stable when used on flat ground, and will provide ample grip and stability.

The Spring Loaded Bipod for Harris Lug mounts to Harris sling/bipod lugs, which are present on many Airsoft sniper rifle replicas, including most M40A1, M24 and VSR-10 replicas. If you're rocking one of these rifles and want to make it look the business while improving stability when shooting from static positions, the Specna Arms Spring Loaded Bipod for Harris Lug belongs on board!