Specna Arms Airsoft

Want to make your Airsoft rifle more comfortable? An enhanced stock is what you need! The Specna Arms Crane Enhanced Carbine stock is constructed from high-density polymer, with steel QD sling sockets on either side, a steel adjustment pin and a rubber butt plate for added grip in all weather conditions. This stock is easy to install and simply requires you to lift the adjustment lever up and slide the stock onto your buffer tube. This stock will fit any AEG spec M4/AR15 buffer tube, including M4/AR15 stock adapters for Airsoft AK AEGs, SMG-5 and AR36 AEGs.

A spring-powered Airsoft bolt action Sniper Rifle which is a replica of the ever-popular M40A5, and comes with 3 x magazines and a Polymer rail system for the handguard.

A spring-powered Airsoft bolt action Sniper Rifle which is a replica of the ever-popular M40A5, and comes with 3 x magazines and a Polymer rail system for the handguard.

A spring-powered Airsoft bolt action Sniper Rifle which is a replica of the ever-popular M40A5, and comes with 3 x magazines and a Polymer rail system for the handguard.

A spring-powered Airsoft bolt action Sniper Rifle which is a replica of the ever-popular M40A5, and comes with 3 x magazines and a Polymer rail system for the handguard.

If you love the AR-9 SMG look but partake in a mix of CQB and woodland skirmishes, the Specna Arms SA-FX02 FLEX™ HAL¹ ETU AR-9 AEG is a fine choice! Made from strong high density polymer with Specna Arms' unique receiver design, the SA-FX02 is the mid-length alternative to the FX01, equipped with a 10.5-inch outer barrel and sound-amplifying muzzle device, offering improved performance at longer range and a menacingly loud "pop" each time the AEG is fired.

Inside, the HAL¹ MOSFET/ETU system provides functionality rarely seen in AEGs at this price. The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original FLEX™ AEG series, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

An ultra-light and agile build front to back, the FX02 is ideal for those who prefer slimmer AR-9 magazines but seek a more multi-role platform than comparable CQB-optimised AR-9s. Whether this will be your first foray into the Airsoft world or you're an experienced skirmisher seeking a lightweight but advanced backup, the Specna Arms SA-FX02 FLEX™ HAL¹ ETU AR-9 AEG has both boxes ticked!

If you love the AR-9 SMG look but partake in a mix of CQB and woodland skirmishes, the Specna Arms SA-FX02 FLEX™ HAL¹ ETU AR-9 AEG is a fine choice! Made from strong high density polymer with Specna Arms' unique receiver design, the SA-FX02 is the mid-length alternative to the FX01, equipped with a 10.5-inch outer barrel and sound-amplifying muzzle device, offering improved performance at longer range and a menacingly loud "pop" each time the AEG is fired.

Inside, the HAL¹ MOSFET/ETU system provides functionality rarely seen in AEGs at this price. The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original FLEX™ AEG series, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

An ultra-light and agile build front to back, the FX02 is ideal for those who prefer slimmer AR-9 magazines but seek a more multi-role platform than comparable CQB-optimised AR-9s. Whether this will be your first foray into the Airsoft world or you're an experienced skirmisher seeking a lightweight but advanced backup, the Specna Arms SA-FX02 FLEX™ HAL¹ ETU AR-9 AEG has both boxes ticked!

If you have ever felt like you messed up buying a rifle with a 14mm clockwise threaded barrel, weep no more! This 14mm CW to 14mm CCW thread adapter attaches to any 14mm CW male thread and provides a 14mm CCW male thread for the addition of more common CCW threaded accessories!

If your team use M4s but you prefer the AR36 this will suit your needs! This replacement magazine well will allow you to share magazines with your team and use smaller and more prevalent M4 magazine pouches.

Specna's iron sights are simple, no frills back up sights constructed from high density polymer, helping keep the weight of your build down for more important, heavy things, like huge freakin' scopes!

Specna's iron sights are simple, no frills back up sights constructed from high density polymer, helping keep the weight of your build down for more important, heavy things, like huge freakin' scopes!

If you want to give your primary a sneaky look, a suppressor will do the trick! The Specna Arms Covert Tactical Silencer is constructed from aluminium and has 14mm CCW threads at one end, with 14mm CW threads at the opposite end. This suppressor is the 40mm diameter version, available in either 100mm or 150mm lengths; ideal for rifle and SMG builds.

This version of Specna's silencer is the 40mm "Brrrrt" version, marked with "BRRRRRRRRT" on the outside in stylised text with a wider diameter than the standard. This suppressor is ideal for A10 Warthog fans, minigun fans or anyone whose primary is appropriately fast!

If you're looking for a compact and lightweight AR platform with stealthy styling, the Specna Arms SA-C05 CORE™ HAL¹ ETU™ M4/AR-15 AEG is a great shout. This M4/AR-15 AEG follows Specna's "CORE" build standard, with a CNC aluminium handguard, alloy outer barrel and suppressor paired with a high density polymer receiver, stock and pistol grip, ideal for skirmishers who like to move fast and keep energy high all day long.

This, the latest SA-CO5 is rocking Specna's HAL¹ ETU,  boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for an entry-level price point!

If you're looking for a compact and lightweight AR platform with stealthy styling, the Specna Arms SA-C05 CORE™ HAL¹ ETU™ M4/AR-15 AEG is a great shout. This M4/AR-15 AEG follows Specna's "CORE" build standard, with a CNC aluminium handguard, alloy outer barrel and suppressor paired with a high density polymer receiver, stock and pistol grip, ideal for skirmishers who like to move fast and keep energy high all day long.

This, the latest SA-CO5 is rocking Specna's HAL¹ ETU,  boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for an entry-level price point!

If you have a magazine which leaks from the fill valve, or your mag is a bit old and the valve has taken a hammering over the years, a replacement valve is the way to go. This Specna Arms valve replaces the fill valve in your magazine with a nice fresh one, complete with an O-ring to ensure there are no leaks! This valve will require a valve key to install.

If you need more stability when shooting from a static position, the Specna Arms Adjustable Telescopic Bipod for 20mm Picatinny Rail will assist! The bipod is predominantly made from alloy, with certain steel parts for strength. The bipod legs can be collapsed and extended by turning the knurled section on each, catering to a wide variety of platforms, terrain and uses.

The bipod is constructed from Alloy, with Rubber feet to prevent slipping on wet surfaces. The bipod mounts to 20mm Picatinny rails using an integral rail mount which can be tightened either by hand or using a large flat-headed screwdriver to secure. The legs can be folded up and down for transport using the catch on each, keeping your setup portable for when you need to relocate (fancy word for legging it). If you're running a hefty DMR or sniper rifle setup, use this Bipod to get more accurate shots from a supported position!

If you need more stability when shooting from a static position, the Specna Arms Adjustable Telescopic Bipod for 20mm Picatinny Rail will assist! The bipod is predominantly made from alloy, with certain steel parts for strength. The bipod legs can be collapsed and extended by turning the knurled section on each, catering to a wide variety of platforms, terrain and uses.

The bipod is constructed from Alloy, with Rubber feet to prevent slipping on wet surfaces. The bipod mounts to 20mm Picatinny rails using an integral rail mount which can be tightened either by hand or using a large flat-headed screwdriver to secure. The legs can be folded up and down for transport using the catch on each, keeping your setup portable for when you need to relocate (fancy word for legging it). If you're running a hefty DMR or sniper rifle setup, use this Bipod to get more accurate shots from a supported position!

Looking for the old school "issued" look for your M4 or M16 Airsoft AEG? The M4/M16 Style Carry Handle/Rear Iron Sight from Specna Arms will give you the look you need, with some simple and utilitarian functionality, and very little to go wrong in the heat of a firefight. This carry handle is constructed from alloy with steel mounting screws and a steel mounting bracket, to ensure it can take the weight of your rifle no matter how much stuff you have bolted on!

If you're looking for a lightweight but menacing AR platform, the Specna Arms SA-FH07 FLEX™ HAL¹ ETU™ M4/AR-15 AEG is perfect for you. This AEG follows Specna's "FLEX" build standard, with full polymer externals, plus, an alloy flash hider and outer barrel. It's ideal for skirmishers who like to move fast and keep their energy high all day.

The latest SA-FH07 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive considering its low price point

If you're looking for a compact and lightweight AR platform which is perfect for close-quarters engagements, the Specna Arms SA-C12 CORE™ HAL¹ ETU™ AEG is a superb choice. This M4/AR-15 AEG follows Specna's "CORE" build standard, featuring a CNC aluminium handguard, alloy outer barrel and suppressor paired with a high density polymer receiver, stock and pistol grip, ideal for skirmishers who like to move fast and maintain high-energy skirmishing all day long.

This, the latest version of the SA-C12 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for a beginner-level price point!

If you want to give your platform a sneaky style, this suppressor is for you! This Specna Arms Covert Tactical Silencer is constructed from aluminium and has both 14mm CCW threads and 14mm CW threads, one on each side. This simple suppressor is very light and has lots of length options, making it suitable for everything from GBB pistols to DMRs without compromising any performance.

This Specna Arms suppressor is marked with "SHHHHHH" and someone shushing their lips, making it the perfect choice for a humorous skirmisher who likes to remain sneaky on the battlefield. If you want that sneaky final touch for your Airsoft platform, you won't find anything more fitting and on the nose than this Specna Arms SHHHHHH Silencer!

If you want to give your platform a sneaky style, this suppressor is for you! This Specna Arms Covert Tactical Silencer is constructed from aluminium and has both 14mm CCW threads and 14mm CW threads, one on each side. This simple suppressor is very light and has lots of length options, making it suitable for everything from GBB pistols to DMRs without compromising any performance.

This Specna Arms suppressor is marked with "SHHHHHH" and someone shushing their lips, making it the perfect choice for a humorous skirmisher who likes to remain sneaky on the battlefield. If you want that sneaky final touch for your Airsoft platform, you won't find anything more fitting and on the nose than this Specna Arms SHHHHHH Silencer!

If you're on the hunt for upgraded motors and need maximum speed and torque, the Specna Arms DARK MATTER™ Brushless Motor; Long should fit the bill. This Brushless Motor is Specna's top of the line offering, made with a CNC aluminium housing and available in ultra swift 39K RPM and the diabolically fast 48K RPM variants. This is the "long shaft" version, designed for use in M4/AR-15, SMG-5, G3 and P90 AEGs.

DARK MATTER™ motors are Brushless Motors, similar to the legendary Warhead Industries examples and boasting lower heat build-up, higher torque-to-weight ratio, improved reliability via reduced friction and significantly reduced operating noise when compared to conventional brushed motors. While installing a DARK MATTER™ motor in your AEG will make it a beast, the more important aspect is keeping it performing in the long term. As is always the case with super strong motors, we only recommend the Dark Matter series to those with the technical know-how to ensure their setup can handle it!

Want to keep your Airsoft rifle looking like its real steel counterpart? Then this realistic muzzle break will help! The Specna Arms Bird Cage Flash Hider For 14mm CCW Thread replicates the real M4 muzzle brake seen on most real steel rifles and is constructed from alloy with 14mm CCW threading. Real muzzle brakes are designed to reduce felt recoil by redirecting gas out of the ports on each side, and although you won't get this effect with an Airsoft muzzle brake, it will give your Airsoft rifle a modern, iconic look.

A Polymer constructed spare magazine for the Specna Arms SA-S03/SA-S02 Sniper Rifle, which holds a total of 20 BBs and is the perfect purchase for those who want to spend more time in their nest, and less time crawling back to the safe zone for a reload.

If you're in search of the optimal desk organiser for when you are upgrading or maintaining your Airsoft platforms, the Specna Arms Maintenance Tech Mat should be one to consider! This desk mat is constructed from PVC polymer and has walled sections for storing important bits like internal parts or screws, no more crawling around looking for the parts that have rolled off the desk!

The tech mat also has an anti-slip base, meaning it won't move around whilst you're using it to work on your favourite Airsoft rifle or equivalent. Anyone who likes to take tech work into their own hands needs one of these; the storage compartments and anti-slip base make maintenance ten times easier!

If you are looking for an MK18, but you're not interested in keeping to the Milsim bland basic style, then the Specna Arms SA-A03 ONE™ MK18 Red Edition; Kestrel Basic ETU is certainly worth your time. This MK18 is fitted with some stylish red receiver parts, such as the mag release, charging handle and sling plate. The full metal externals give this platform a realistic weight and distribution as well as making it strong and able to withstand even the roughest of skirmishes.

Inside the Specna Arms SA-A03 ONE™, there are some incredible straight-out-of-the-box internals. It features a Kestrel Basic ETU, 18:1 ratio steel gears running on 8mm ball bearing bushings and a reinforced gearbox shell with an Enter & Convert™ quick change spring guide. This allows you to change the spring without having to open the gearbox itself. Also inside is a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, getting you off the mark with above-average accuracy potential and a slight FPS boost.

If you have an M-LOK handguard, but own mostly Picatinny attachments, you need these rail sections! The Specna Arms Aluminium Picatinny Rail Set for M-LOK Handguard includes 3 different lengths of rail sections so that you can customise your rifle to your heart's content. This is perfect for mounting Picatinny accessories such as torches, lasers, grips and many other aftermarket attachments!

Infinitely functional and incredibly comfortable, the Specna Arms Heavy Ops Stock for M4/AR-15 Platforms offers modern looks, an ergonomic shape and a massive internal battery compartment. Although branded as 'Heavy Ops', this stock is anything but, being constructed from lightweight yet strong high-density polymer to keep your setup light, agile and well balanced.

The internal battery compartment can be accessed by pushing the two tabs at the toe of the stock through, after which the butt plate will pop off. Inside, you'll find a pair of generous 17 cm long battery compartments, ideal for crane/nunchuck configuration batteries.

Amongst its many ergonomic perks, the Heavy Ops Stock features rubberised cheek rests for comfort and a thick serrated butt plate made from rubber for perfect traction in any weather conditions. The adjustment lever is ambidextrous and concealed within the "A-frame" shape, preventing equipment snags and keeping you agile in the field. If you need a substantial battery compartment but seek modern aesthetics, the Specna Arms Heavy Ops Stock for M4/AR-15 Platforms covers both bases!

With the release of the J Series from Specna Arms comes their line of J Series Mags. If you own a J series and need some spare mags to go with your new beauty, you've come to the right place. Even if you don't own a J Series and fancy yourself a new ultra-modern magazine, you'd be hard-pressed to find a better mag than this.

This magazine is a mid-cap variant, meaning that it holds a medium amount and is filled at the top using a speed loader. Unlike high-cap mags there is no 'battle rattle' so if you're a more sneaky type of player mid-cap mags are for you.

The magazine is constructed from high-density polymer and features a matte colour and a somewhat rough texture with additional friction for a satisfying feel and ease of loading. On either side of the mag, you can see a modern checked texture for the modern battlefield