Airsoft Gas / CO2 Magazines

If you need to carry some extra rounds for yourSRC SR-SP GBB Pistol, you need a couple of these! Like most Airsoft pistol magazines, it features a double-stacked design, capable of holding up to 25 rounds. Ammunition can be loaded from the front either by hand or using an Airsoft speed loader, once the BB guide has been pulled to the bottom of the magazine.

This magazine can be filled with gas via the valve on the bottom through the base plate, which is removable, allowing easier access for any maintenance and can be replaced should the magazine become damaged. On closer inspection of the magazine, subtle Raven logos have been engraved into the bottom of the base plate, a tasteful finishing touch.

If you're running a WE SMG-8 GBB platform, you'll need a few of these to keep the fun and kills coming! The WE 44rnd Magazine for WE GBB SMGs is constructed from alloy and compatible with the WE SMG-8 and similar platforms from WE. The mag can be loaded either through the feed lips at the top of the mag body or through the feed channel by pulling the follower down. We recommend a speed loader to make the loading process easy and avoid being the last one ready on game day!

This is a green gas magazine and is compatible with summer gas, green gas or red gas and can be filled by inverting the magazine through the fill valve on the baseplate.

A  spare or replacement 25 round Airsoft magazine designed for use in both the RAVEN EU Series and  WE Europe's G-Series of gas blowback Airsoft pistols. 

A spare or replacement magazine for the Army Armament JW3/JW4 Combat Master. Perfect for those die hard JW fans, who wants to live out their JW fantasy on the field.

Looking for spare magazines for the VORSK VMP-1 or VMP-2? You have found them! The VORSK 45rnd Magazine for VMP GBB Series is constructed from alloy with a steel feed spring and brass valves, holding 45 BBs which can be loaded either by hand through the feed lips at the top or using a speed loader. Please note, these magazines do not include the polymer magazine sleeve supplied with the original magazine included with the VMP-1 and VMP-2 but these are available separately. 

Ideal for VMP-1 or VMP-2 users who need maximum capacity, this magazine is also compatible with ASG MP9 and KWA TP9 replicas. If you're gearing up to run the VMP-1 or any VMP-2 variant, these magazines are essential!

A spare or replacement Magazine for Army Armament branded 1911 series Gas Blowback pistols, holding a total of 25rnds and being compatible with R31 and R29 models. It has a flat baseplate so that it fits flush with the bottom of the Pistol Grip, and is reportedly compatible with Army, APS, KJ Works and Tokyo Marui models.

If you are running the gorgeous Army Armament Sand Viper you will need some equally gorgeous magazines to feed it! The Army Armament 28rnd Magazine for TTI Sand Viper is intended for the Sand Viper, of course, and comes with a CNC machined Aluminium baseplate finished in bronze sporting the Taran Tactical Innovations logo. Being a Hi-capa-based design, this magazine should also fit and feed in most TM-compatible Hi-capa pistols.

The magazine follows the standard GBB pistol mag layout, with the gas fill valve located on the baseplate, requiring both the magazine and your gas can to be inverted to fill. The mag can be loaded through the feed lips or through the feed channel on the front when the follower is pulled down, either by hand or using an Airsoft speed loader. If you want to load up on mags for your Sand Viper but you need the matching baseplates, here you go!

A 40 Round Green Gas Magazine for the UMAREX Airsoft Gas Blowback MP7A1.

If you are running a MAC-11 GBB that unbelievable rate of fire will have you needing plenty of spare mags, so stock up while they're hot! The HG-203 MAC-11 Green Gas Magazine from HFC holds 42 BBs, all of which will be gone in a couple of seconds on full auto! The magazine can be loaded through the feed lips by pulling the follower down to the bottom, where it will lock into place. You can load this mag either by hand or by using an Airsoft speed loader. Once you are finished loading, press the small protruding tab on the follower to release it and reapply tension to the feed spring. The fill valve is located on the bottom of the magazine and can be filled with summer gas or green gas. 

Want to run your trusted side arm as a primary? Now is your chance! A 30 round magazine for the 1911 platform designed for the Army Armament 1911 / R32.

An Alloy constructed 23rnd magazine for the Vorsk series of Hi-Capa Gas Blowback Pistols.

A replacement, spare or 'special treat' magazine for your gas-powered EU Series pistol, which holds a frightening 50rnds to keep your sidearm blazing throughout the day.

If you're running your VMP-1 SMG as a backup or cutting about with the beastly VMP-2D or MD, the VORSK 20rnd Short Gas Magazine for VMP GBB Series is the compact magazine you need! This green gas magazine holds 20 BBs and is designed for the VORSK VMP-1 and VMP-2 GBB platforms. The mag is loaded through the feed lips on the top or through the follower channel by pulling the follower on the front down. You can use a speed loader or load by hand, depending on your timescale!

Filling the internal gas reservoir requires that you invert the magazine, indexing your green gas can with the fill valve on the baseplate. VORSK recommends V6 or V8 green gas for this magazine to stay within its performance parameters. The major advantage of this mag is its short overall length, allowing you to get lower in the prone position and take advantage of surrounding cover. If you dream of using your VMP-1 like a giant pistol or need compact mags to suit your VMP-2D or VMP-2MD DMR, these are what you need!

If you're getting gassed up for the GBBR season and you're running a CGS or TM ZET system GBBR, fill your rig with these! The CYMA 30rnd Green Gas Magazine for M4/AR-15 CGS & ZET GBBR is compatible with both CYMA CGS and Tokyo Marui ZET system M4/AR-15 GBBRs and is a green gas magazine with the fill valve on the rear of the steel STANAG style body.

The mag can be loaded through the feed lips at the top of the magazine, though this can be challenging with a standard speed loader without a GBBR adapter. As with the original TM and CYMA GBBR magazines, these mags include the bolt stop components which lock the bolt open at the end of a mag, and each mag holds 30 BBs. 

If you are a GBBR user you will be well aware that your magazines hold a mere 6th of what the average AEG high-cap holds, so spare magazines are a must unless you are pretty speedy with a speedloader!

If you're planning to grab the KRYTAC Vector when it drops, this is the cheapest way to fill your rig! This three-pack of low-capacity green gas magazines is designed exclusively for the Airsoft KRYTAC KRISS® Vector GBB, created by KRYTAC and officially licensed by KRISS®.

Introducing the Lightweight Green Gas Magazine from Action Army, a 50 round extended magazine for the much-lauded Action Army AAP-01 pistol and TM compatible EU series pistols. This magazine looks like something we have seen before, but at around half the weight! If you want an extended magazine but you don't want to ruin the balance of your pistol, this would be what you need!

A spare magazine for HFC's gas powered Desert Eagle; made as a clone of the Tokyo Marui magazines.

If you are looking for mags for your Double Eagle EMG Noveske N4 MWS you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR and unfortunately don't fit the Tokyo Marui M4A1 MWS ZET System GBBR. Thought we would get the bad news over with early!

The mag is constructed with a high-density polymer shell and alloy internals and can be loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is on the rear of the magazine, just below the knocker valve, and the mag is compatible with both green gas and red gas.

The design of the externals is down to Double Eagle themselves, who have added an over-insertion stop at the front of the magazine to prevent the feed lips from being damaged after a reload under pressure. On each side of the body, there is also anti-slip dot texture to prevent the magazine from being dropped and the front of the mag also features finger grooves so it can be used as a makeshift grip when shooting from unconventional positions.

If you are looking for mags for your Double Eagle EMG Noveske N4 MWS you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR and unfortunately don't fit the Tokyo Marui M4A1 MWS ZET System GBBR. Thought we would get the bad news over with early!

The mag is constructed with a high-density polymer shell and alloy internals and can be loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is on the rear of the magazine, just below the knocker valve, and the mag is compatible with both green gas and red gas.

The design of the externals is down to Double Eagle themselves, who have added an over-insertion stop at the front of the magazine to prevent the feed lips from being damaged after a reload under pressure. On each side of the body, there is also anti-slip dot texture to prevent the magazine from being dropped and the front of the mag also features finger grooves so it can be used as a makeshift grip when shooting from unconventional positions.

A replacement/spare gas magazine for the ASG / TM MK23 NBB pistols, which is manufactured to an OEM standard.

If you are looking for magazines for your Double Eagle or Tokyo Marui MWS GBBR; you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR, but should work with original Tokyo Marui M4 MWS System GBBRs too - unlike other Double Eagle gas magazines.

The mag is constructed with a durable alloy shell and internals. It is loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is at the bottom of the magazine, on the baseplate, and the mag is compatible with both green gas and red gas.

It holds 35 BBs, making it perfect for those who seek realism. As with the original TM and Double Eagle GBBR magazines, these mags include the bolt stop components which lock the bolt open at the end of a mag, further adding to the realism of the Double Eagle Noveske N4 MWS ZET System GBBR!

This 28rnd Green gas magazine is designed for the SRC Hi-capa GBB series, including the Baba Yaga and Kikimora pistols. The magazine can be loaded either through the feed lips or by dragging the follower down to the bottom and loading through the bottom of the feed channel.

A gas blow back magazine made by VORSK for their 1911 MEU and VX-9 Series of Airsoft Pistols. The magazine is constructed with an alloy body and polymer base plate, and holds up to 36 rounds. The magazine is an extended variant of the magazine which comes with the pistol, and great for those who want the original magazines with a higher capacity to go with the pistol. The magazine is filled with BBs from the front or from the top using an Airsoft speed loader, and filled with gas from the bottom via a standard Airsoft Green Gas bottle. 

If you're looking to bolster your VORSK 1911 MEU or VX-9 pistol magazine collection with 100% compatible magazines then this is the way to go. 

A gas blow back magazine made by VORSK for their 1911 MEU and VX-9 Series of Airsoft Pistols. The magazine is constructed with an alloy body and polymer base plate, and holds up to 36 rounds. The magazine is an extended variant of the magazine which comes with the pistol, and great for those who want the original magazines with a higher capacity to go with the pistol. The magazine is filled with BBs from the front or from the top using an Airsoft speed loader, and filled with gas from the bottom via a standard Airsoft Green Gas bottle. 

If you're looking to bolster your VORSK 1911 MEU or VX-9 pistol magazine collection with 100% compatible magazines then this is the way to go. 

If you're opposed to reloads and prefer shooting, the 44rnd Extended Hi-Capa Magazine for R501/R603/R604 from Army Armament belongs on your 'Capa. This extended green gas magazine is compatible with Army Armament Hi-Capa GBB pistols but should also fit most Tokyo Marui-based Hi-Capa clones.

Constructed from alloy with a CNC aluminium baseplate and polymer feed lips, loading this mag is the same process as any other GBB pistol magazine; use a speed loader or loading tool and load either through the feed lips on top or by pulling the follower on the front down and loading through the widened section. Filling the amply-sized gas reservoir is equally easy; simply invert the magazine and gas canister and press the nozzle of your canister into the fill valve on the bottom of the mag.

If you use your Hi-Capa as a primary for CQB or like to keep a stendo on hand for emergencies, the Army Armament 44rnd Extended Hi-Capa Magazine for R501/R603/R604 should be a welcome addition to your kit list!

If you are after spare magazines for your brand new Evolution Airsoft E911, whether it is the discrete Defender model or the super tacticool Special Operations model, you are in luck! This magazine holds 25 rounds and can be loaded using a speed loader, either through the feed lips at the top of the mag or the fill port at the front, accessible when the follower is pulled down. This is a green gas magazine, and the fill valve can be found on the baseplate of the mag. This magazine is TM spec, though we have not had the opportunity to test it with a TM 1911 we can confirm that it works with the Army MEU, and potentially others!

The ideal magazine for those who want to spend less time reloading and more time shooting!

A spare or replacement magazine for Raven's R9 GBB pistol. This magazine is constructed from alloy with a steel feed spring, polymer feed lips and brass valves. The magazine holds approximately 25 rounds and can be loaded either with a speed loader or by hand through the feed lips at the top, or the feed channel in the front. This magazine is suitable for summer gas, maintenance gas and green gas.

If you want to take pure advantage of the AAP-01's insane rate of fire or you operate with the philosophy that reloads are for losers, the Action Army 350rnd Drum Magazine for AAP-01 GBB Pistols is perfect for you! This green gas drum magazine operates via a "flash mag" type system, meaning instead of winding an awkward wheel to keep the mag feeding you simply need to pull the steel drawcord on the base 4-5 times and you're ready to rock. 

The Drum Magazine holds 350 BBs, more than 10 times the capacity of a standard AAP magazine and around 7 times the capacity of an extended AAP magazine; the perfect thing for AAP owners making full use of full auto and those who move so fast they ain't got time to reload!