Search results for 'L85A3'

If you are looking for M4/AR-15 AEG magazines that are a cut above the rest, the PTS Syndicate 150rnd EPM Gen.2 Enhanced Polymer Magazine is the one to go for! This is the Gen.2 version of the EPM, building on the superb design of the original by adding improved gripping texture on the exterior, compatibility with Magpul MAGLINK® magazine couplers and a new, more rigid Zytel polymer baseplate.

Like the usual mid-cap magazine, the EPM Gen.2 is loaded through the fill/feed port at the top using an Airsoft speed loader or loading rod/tool and has no battle rattle whatsoever, making it great for milsim inclined skirmishers and those who prioritise stealth when skirmishing. All of the enhancements from the original EPM design have been retained, including the magazine well guides at the top of the shell which eliminate wobble, the witness window showcasing mock cartridges with a clear section to confirm the mag is fully loaded and the high visibility orange follower so you can confirm when your mag is empty.

With a wide range of compatibility, a high-strength compression spring and Dupont Zytel polymer construction, you would be hard pressed to find a better magazine for M4/AR-15 AEG compatible platforms!

If you are looking for M4/AR-15 AEG magazines that are a cut above the rest, the PTS Syndicate 150rnd EPM Gen.2 Enhanced Polymer Magazine is the one to go for! This is the Gen.2 version of the EPM, building on the superb design of the original by adding improved gripping texture on the exterior, compatibility with Magpul MAGLINK® magazine couplers and a new, more rigid Zytel polymer baseplate.

Like the usual mid-cap magazine, the EPM Gen.2 is loaded through the fill/feed port at the top using an Airsoft speed loader or loading rod/tool and has no battle rattle whatsoever, making it great for milsim inclined skirmishers and those who prioritise stealth when skirmishing. All of the enhancements from the original EPM design have been retained, including the magazine well guides at the top of the shell which eliminate wobble, the witness window showcasing mock cartridges with a clear section to confirm the mag is fully loaded and the high visibility orange follower so you can confirm when your mag is empty.

With a wide range of compatibility, a high-strength compression spring and Dupont Zytel polymer construction, you would be hard pressed to find a better magazine for M4/AR-15 AEG compatible platforms!

If you want the ACOG look but you're more of a CQB skirmisher, this is the perfect ACOG for you! The Delta Armory ACOG TA01 Style Red Dot Sight is patterned after the real steel TA01, used by UKSF during the Task Force Black era, US SOCOM as part of the SOPMOD Block 1 M4A1 update, the British Army prior to the adoption of the ELCAN LDS along with multiple other branches of special forces around the world.

While the real steel ACOG is a 4x fixed power combat optic (FPCO), this one is a red dot reflex sight cunningly disguised as an ACOG, allowing you to enjoy unlimited eye relief and keep your loadout authentic while taking names in CQB. With an integral 20mm Picatinny mount, alloy BUIS mounted on the top of the housing and 5 brightness settings for the red or green illuminated reticle, this optic packs in a lot of functionality, even if you aren't bothered that it looks like an ACOG!

If you're a British firearms enthusiast you must recognise the L2A3 Sterling SMG, the iconic British submachine gun which served with the British Army throughout the Cold War and beyond. Replacing the STEN gun, the Sterling was everything the STEN should have been, offering improved ergonomics, semi-auto and full auto fire modes and a complex but highly functional folding stock. This SMG was one of the few British firearms squaddies reportedly liked, and the S&T replica matches up with the Sterling's superb reputation in the real steel world. 

Constructed almost entirely from steel with all the features one would expect from an authentic Sterling replica, the S&T L2A3 is built like a tank, with the appropriate weight and heft for a realistic experience whether you're skirmishing with it or just fondling it on the sofa. Inside, we have a unique gearbox type with an alloy shell, caged motor and 18:1 ratio steel gears, with a well-concealed rotary adjustable HOP-up unit on the outside of the outer barrel. If you're looking for an old-school SMG or are working on your historic British firearms collection, you need the S&T L2A3 MK4 Sterling!

If you're sick to death of M4/AR-15 AEGs, who can blame you? The Novritsch SSR77 A2 AUG AEG is a breath of fresh air, based on the old-school-cool AUG design with modern attachment interfaces and pre-upgraded internals throughout, ideal for the skirmisher who wants a unique primary platform with performance to match the latest M4 AEGs to hit the market.

On the outside, the SSR77 A2 is dressed to impress, boasting a unique CNC aluminium M-LOK handguard, reduced profile upper 20mm Picatinny rail and a pair of QD sling sockets on each side, ready to be decked out like the most cutting edge M4s. Inside, things are even more impressive! This is one of the first AUG replicas to hit the market with a programmable MOSFET pre-installed, meaning SSR77 owners can join the SSR4, UTR45 and Gate TITAN owners enjoying burst mode, binary trigger and several levels of pre-cocking adjustment. If you've ever mourned that all the sick technology is in M4 replicas, the SSR77 A2 AUG AEG should put a smile back on your face!

If you're into the British Army look, this should be your primary! The Ares SA80/L85A3 AEG; Deluxe Standard Issue Set includes everything you'll need to recreate the iconic L85A3 rifle as it is issued to the British Army, including a fantastic replica of the ELCAN Specter LDS 4x optic with the Shield RMS piggyback red dot sight and a Grip Pod replica in desert tan.

Just like the standard version, this beast boasts full metal construction and incredible attention to detail, making it as suitable for skirmishing as it is for display in a museum! The lower and upper receivers are both made from stamped steel, with the modernised A3 handguard and 20mm Picatinny top rail being CNC machined from aluminium for a flawless form and perfectly in-spec attachment interfaces.

Inside, the L85A3 is based around a unique gearbox shell with the Ares EFCS MOSFET, providing programmable fire controls through the Ares EFCS Programming Box (available separately) and preventing trigger lock-ups for a ferocious semi-auto response rate. A high torque motor drives the 18:1 steel gearset, allowing for stronger springs to be installed and further improving trigger response. To add a side of realism to the firing experience, the L85A3 also boasts an electric blowback system, cycling the mock bolt carrier back and forth with each shot and drowning out the gearbox report with a violent "clack-clack-clack".

If you're working on a modern British Army loadout and need a primary to finish it off, you can't ask for much better than the Ares SA80/L85A3 AEG; Deluxe Standard Issue Set. With the correct optic and vertical grip, 2 magazines and a superb quality hard case to store it all in, this is the L85A3 replica package for the skirmisher who wants the most realistic look without any problems sourcing the correct bits!

Calling all British Army loadouts!! This is the absolute greatest L85 platform Airsoft Replica the market has seen yet, but we didn't need to tell you that. Featuring Stamped Steel and CNC Aluminium construction, a realistic Electronic Blowback, a Microswitch Trigger, Functional Bolt Lock System, Electronic Fire Control System and SO much more, this is the ultimate Airsoft Replica of a British Army standard. As an added bonus, it comes supplied in a gorgeous Hard Case that has been purpose-formed for the Rifle.

If you need affordable mags for your M4 but insist on maximum realism, the Delta Armory 130rnd STANAG Mid-cap Magazine for M4/AR-15 AEG is ideal. Unlike similarly priced Mid-cap magazines, this mag is constructed with a realistic stamped steel shell, holding 130 BBs loaded through the fill/feed port on top using a speed loader or loading tool. 

Compatibiity-wise, this is in every way a standard M4/AR-15 AEG mid-cap and should work in the vast majority of M4, SCAR-L and L85 AEGs. If you're a few mags short of a full loadout, the Delta Armory 130rnd STANAG Mid-cap Magazine for M4/AR-15 AEG is a great way to tool up on the cheap!

If you need affordable mags for your M4 but insist on maximum realism, the Delta Armory 130rnd STANAG Mid-cap Magazine for M4/AR-15 AEG is ideal. Unlike similarly priced Mid-cap magazines, this mag is constructed with a realistic stamped steel shell, holding 130 BBs loaded through the fill/feed port on top using a speed loader or loading tool. 

Compatibiity-wise, this is in every way a standard M4/AR-15 AEG mid-cap and should work in the vast majority of M4, SCAR-L and L85 AEGs. If you're a few mags short of a full loadout, the Delta Armory 130rnd STANAG Mid-cap Magazine for M4/AR-15 AEG is a great way to tool up on the cheap!

If you're seeking an SA80 to complete your Squaddie kit, the WE L85A2 SA80 Replica GBBR is as realistic as they come! This full metal gas blowback rifle is constructed predominantly from stamped steel with an alloy outer barrel and olive green polymer furniture; a fantastic match for the real steel L85A2 as it was originally issued to the British Army.

Whether you're getting involved in Milsim skirmishes or want a realistic platform for training, movie making or display, the WE L85A2 is the one to go for. It kicks like a mule, operates almost exactly like the real thing and is made with the same proportions of metal to polymer as the real deal.

Compatibility-wise, the L85A2 takes WE Open Bolt M4/AR-15 magazines and VSR/GBB type inner barrels and HOP-up rubbers, meaning mags are common and a reliable design and you have access to some of the best aftermarket barrel and HOP-up bucking combos so you can maximise your accuracy and range potential. If you like to challenge yourself in game with 30-round mags, shoulder-thumping recoil and a realistic manual of arms, the WE L85A2 SA80 Replica GBBR is the way to go!

Looking for modern M4/AR15 AEG magazines? You've found what you need in the Battleaxe 150rnd Polymer Magazine! This mag is designed for the M4/AR15 AEG platform but should also fit most SCAR-L, 416 and L85 style AEGs. The magazine is constructed from rock solid high density polymer and holds a respectable 150 BBs which are loaded through the fill/feed port on the top of the magazine body. This is a spring-loaded mid-cap, meaning it won't rattle as you run and give your position away.

If you want the ACOG look but you're more of a CQB skirmisher, this is the perfect ACOG for you! The Delta Armory ACOG TA01 Style Red Dot Sight is patterned after the real steel TA01, used by UKSF during the Task Force Black era, US SOCOM as part of the SOPMOD Block 1 M4A1 update, the British Army prior to the adoption of the ELCAN LDS along with multiple other branches of special forces around the world.

While the real steel ACOG is a 4x fixed power combat optic (FPCO), this one is a red dot reflex sight cunningly disguised as an ACOG, allowing you to enjoy unlimited eye relief and keep your loadout authentic while taking names in CQB. With an integral 20mm Picatinny mount, alloy BUIS mounted on the top of the housing and 5 brightness settings for the red or green illuminated reticle, this optic packs in a lot of functionality, even if you aren't bothered that it looks like an ACOG!