Search results for 'smg case'

If you keep getting your SSR9 snagged on the battlefield, the shorter Novritsch SSR9 70rnd Magazine is perfect for you! It is constructed from high-density polymer and can be loaded through the fill/feed port at the top of the mag body using a speed loader or loading rod. 

The 70rnd magazine is quite a reduction from the 120rnd magazine that comes with the SSR9. However, this magazine's short design allows you to play closer to the ground and cover, allowing you to be less at risk of taking hits while delivering them to the enemy team!

The slim design of these magazines allows you to carry plenty, and it goes without saying that you'll need a lot of them to keep up with the SSR9 DSG's insane rate of fire!

If you want to take your S&T Nambu Type 100/40 Submachine Gun AEG out on the skirmish field, you're going to need some spare magazines! This magazine has a durable steel shell and reliable feeding spring, ensuring that this magazine with survive anything a skirmish has to throw at you. Its 110rnd capacity is plenty enough for any skirmisher who plays close-quarters whilst out on the battlefield.

The mid-cap design means that you don't need to wind this magazine at all and it will feed until it's empty, this allows for faster reloads and complete uninterrupted play until the magazine is empty. The curved design allows for a better grip on the magazine whilst reloading and whilst holding the magazine during firing.

Keep your Nambu Type 100/40 Submachine Gun AEG well fed whilst out on the battlefield with an extra 110rnd for every magazine, exactly what you need to skirmish your WW2 loadout effectively!

If you are running a MAC-11 GBB that unbelievable rate of fire will have you needing plenty of spare mags, so stock up while they're hot! The HG-203 MAC-11 Green Gas Magazine from HFC holds 42 BBs, all of which will be gone in a couple of seconds on full auto! The magazine can be loaded through the feed lips by pulling the follower down to the bottom, where it will lock into place. You can load this mag either by hand or by using an Airsoft speed loader. Once you are finished loading, press the small protruding tab on the follower to release it and reapply tension to the feed spring. The fill valve is located on the bottom of the magazine and can be filled with summer gas or green gas. 

If you are up-to-date on your Russian firearms, the PPK-20 must have caught your eye! The latest iteration of the PP-19 Vityaz platform, the PPK-20 further modernises the AK-style SMG with an adjustable side folding stock, the AK-12 pistol grip and a compact suppressor. This, the ARCTURUS AEG replica is a limited run of only 500 pieces worldwide, so if you want one don't hesitate!

Your lack of hesitation will be rewarded when you get the PPK-20 in your hands. This beast is constructed almost entirely from steel, with a flawlessly realistic finish applied to the externals and the hefty feel an AK-derived platform deserves. On the inside, things are equally special as the PPK-20 is rocking a Perun Optical MOSFET, high torque motor, a plethora of reinforced internal components backed up by a new rotary TDC style HOP-up unit and a 6.01mm stainless steel tightbore inner barrel. If you are an AK kinda guy and you appreciate a fully upgraded platform with perfect realism, the PPK-20 will definitely put a smile on your face!

If you are equipped with the WELL PRO WE06 PPK-20 Compact, whether it is the Standard or Advanced version, you will need a few of these to keep it well-fed! The WELL PRO 30/80rnd Variable Capacity Magazine For WE06 is constructed with a high-density polymer shell and steel baseplate and is compatible with both variants of the WE06, but is not compatible with ARCTURUS PP-19 or PPK-20 variants. 

This is an adjustable-capacity magazine which allows you to choose between 30rnd and 80rnd capacity by removing the internals from the shell and flicking the switch on the right side. This can be achieved by pushing the detent on the bottom of the mag in and sliding the baseplate off, after which the internals can be removed through the bottom. 

Otherwise, this mag works just like a normal midcap; filled with a speed loader through the fill/feed port at the top, with no battle rattle giving you away thanks to its spring-loaded internals. Whether it is the impressive Standard version or the insane Advanced version, you'll need quite a few of these to do this fantastic platform justice!

The JG103 is a close replica of the real world MC51 rifle but in a new, modernised form. This MC51 variant comes with an RIS handguard to give the old gun a fresh feel and bring it into the modern era, scope rail ready to mount in the box, and a full stock to give the RIF a balanced look and a large battery compartment. The JG103 is a great multi-purpose AEG and is up to any task you set for it!

If you're looking for a unique QD red dot sight, look no further! The PCS Red/Green Multi-Reticle QD Sight for 20mm Picatinny Rail is a great choice for your Airsoft rifle; it offers a red or green dot with four different reticles for each. It is powered by an LR41 battery that can be inserted into the right-hand side of the scope.

Your choice of reticle can be selected via the dial on the rear of the sight, offering a simple dot, ringed dot, cross or ringed cross reticle, perfect for any environment or preference. With an integral QD mount, all the reticle options one could ever need along with full adjustment when it comes to zero, reticle colour and brightness, the PCS Red/Green Multi-Reticle QD Sight for 20mm Picatinny Rail is an impressive bit of kit for an equally impressive price!

If your MP9 or TP9 is due a style up, the Airsoft Artisan 1913/20mm Picatinny Stock Adapter for KWA MP9/TP9 will add a touch of modernity to your beastly SMG! This stock adapter is constructed from CNC machined aluminium and allows cutting-edge 1913/20mm interface stocks to be mounted, just like MPX and MCX platforms. 

This gives you access to the latest and greatest stock options on the market, ranging from M4/AR-15 buffer tube adapters to lightweight skeletonised stocks and funky-looking visor stocks designed for use with full face protection and respirators. The 1913/20mm interface allows you to swap your stock in seconds whenever you feel like it or even ditch the stock entirely to run your MP9 in its most compact form. If you need your MP9/TP9 to keep pace with other ultra-modern SMGs, the Airsoft Artisan 1913/20mm Picatinny Stock Adapter for KWA MP9/TP9 will do the trick!

If your MP9 or TP9 is due a style up, the Airsoft Artisan 1913/20mm Picatinny Stock Adapter for KWA MP9/TP9 will add a touch of modernity to your beastly SMG! This stock adapter is constructed from CNC machined aluminium and allows cutting-edge 1913/20mm interface stocks to be mounted, just like MPX and MCX platforms. 

This gives you access to the latest and greatest stock options on the market, ranging from M4/AR-15 buffer tube adapters to lightweight skeletonised stocks and funky-looking visor stocks designed for use with full face protection and respirators. The 1913/20mm interface allows you to swap your stock in seconds whenever you feel like it or even ditch the stock entirely to run your MP9 in its most compact form. If you need your MP9/TP9 to keep pace with other ultra-modern SMGs, the Airsoft Artisan 1913/20mm Picatinny Stock Adapter for KWA MP9/TP9 will do the trick!

Those looking for a more ergonomic alternative to the standard VSR/BAR-10 shape, the SSG10 A2 from Novritsch is what you need. Based on the SSG10 A1 with its full complement of upgraded internal parts, the A2 adds a gorgeous ergonomic chassis styled similarly to the real steel MacMillan A4 stock with some unique Novritsch twists.

All the best parts of the original SSG10 are present in the A2 version, including a plethora of CNC-machined aluminium and steel parts, a 6.01mm tightbore inner barrel and Maple Leaf 60-degree HOP-up rubber, offering near-flawless performance straight out of the box. If you want to get sniping with a highly ergonomic platform which is pre-upgraded to the nines, the SSG10 A2 will be an asset to you!

Those looking for a more ergonomic alternative to the standard VSR/BAR-10 shape, the SSG10 A2 from Novritsch is what you need. Based on the SSG10 A1 with its full complement of upgraded internal parts, the A2 adds a gorgeous ergonomic chassis styled similarly to the real steel MacMillan A4 stock with some unique Novritsch twists.

All the best parts of the original SSG10 are present in the A2 version, including a plethora of CNC-machined aluminium and steel parts, a 6.01mm tightbore inner barrel and Maple Leaf 60-degree HOP-up rubber, offering near-flawless performance straight out of the box. If you want to get sniping with a highly ergonomic platform which is pre-upgraded to the nines, the SSG10 A2 will be an asset to you!

If you're running an SSG10 A3 and want it shooting even better than it already does, the Novritsch SSG10 A3 TDC HOP-up Rail Mount will get you there. This part is a unique design from Novritsch, specifically for the A3 variant of the SSG10 and is not compatible with other variants. 

The set includes a 20mm Picatinny rail mount with a TDC HOP-up dial built in and is supplied with the parts you'll need to install it, other than a drill. Be warned, this set requires precision to install and if done wrong, can be catastrophic. As such, we only recommend this to Airsofters experienced with tech work and handy with an electric drill. 

The advantages of TDC HOP-ups are numerous, including providing a stronger HOP-up effect and reducing side-to-side shot deviation. The numerically marked TDC dial also allows you to keep track of your HOP-up settings for different BB weights, a fantastic feature for the serious sniper. The integral 20mm Picatinny rail also allows PEQ lasers, RunCam or Novritsch ClipCam Cheater-Catcher action cameras to be installed in the optimal position. If you want to up the performance of your SSG10 A3 to the maximum, the Novritsch SSG10 A3 TDC HOP-up Rail Mount is what you need!

If you need magazine pouches but use a variety of pistols, the Delta Armory Adjustable MOLLE Magazine Pouch for Pistol Mags is ideal. This pouch is constructed from flexible polymer and is fully adjustable via bungee cord, meaning you can use it for almost any pistol magazine, from Glock to Hi-Capa through MK23 to Five-seveN!

The pouch mounts to MOLLE webbing using the polymer hooks on the rear, retained by a polymer clip. The draw angle can also be adjusted by repositioning the rear screws, allowing you to tilt the pouch forwards or rearwards for a smoother draw. If you live by the philosophy "variety is the spice of life" when it comes to pistols, the Delta Armory Adjustable MOLLE Magazine Pouch for Pistol Mags is the pouch for you!

If you need magazine pouches but use a variety of pistols, the Delta Armory Adjustable MOLLE Magazine Pouch for Pistol Mags is ideal. This pouch is constructed from flexible polymer and is fully adjustable via bungee cord, meaning you can use it for almost any pistol magazine, from Glock to Hi-Capa through MK23 to Five-seveN!

The pouch mounts to MOLLE webbing using the polymer hooks on the rear, retained by a polymer clip. The draw angle can also be adjusted by repositioning the rear screws, allowing you to tilt the pouch forwards or rearwards for a smoother draw. If you live by the philosophy "variety is the spice of life" when it comes to pistols, the Delta Armory Adjustable MOLLE Magazine Pouch for Pistol Mags is the pouch for you!

If you need magazine pouches but use a variety of pistols, the Delta Armory Adjustable MOLLE Magazine Pouch for Pistol Mags is ideal. This pouch is constructed from flexible polymer and is fully adjustable via bungee cord, meaning you can use it for almost any pistol magazine, from Glock to Hi-Capa through MK23 to Five-seveN!

The pouch mounts to MOLLE webbing using the polymer hooks on the rear, retained by a polymer clip. The draw angle can also be adjusted by repositioning the rear screws, allowing you to tilt the pouch forwards or rearwards for a smoother draw. If you live by the philosophy "variety is the spice of life" when it comes to pistols, the Delta Armory Adjustable MOLLE Magazine Pouch for Pistol Mags is the pouch for you!

An Alloy constructed spare or replacement magazine for the G&G GTP9 Gas Blowback Pistol and SMC9 Gas Blowback Carbine. It holds a total of 50rnds and has a huge gas reservoir to ensure it can hold enough gas to perform throughout the entire magazine.

If you want to give your primary a sneaky look, a suppressor will do the trick! The Specna Arms Covert Tactical Silencer is constructed from aluminium and has 14mm CCW threads at one end, with 14mm CW threads at the opposite end. This suppressor is the 40mm diameter version, available in either 100mm or 150mm lengths; ideal for rifle and SMG builds.

This version of Specna's silencer is the 40mm "Brrrrt" version, marked with "BRRRRRRRRT" on the outside in stylised text with a wider diameter than the standard. This suppressor is ideal for A10 Warthog fans, minigun fans or anyone whose primary is appropriately fast!

Blend into the skirmish surroundings for an unparalleled sniping experience. Novritsch brings their Airsoft sniping expertise to the world of camouflage to take your gameplay to the next level. The  Novritsch 3D Camo Cover - SSG10 A3 is a realistic rifle wrap, which is stretchable and fully adjustable to cover your rifle without getting in the way of your controls or vision.

Designed for use with the SSG10 A3 platform, the cover is easily applied and tightened around your gun using adjustable drawstrings that match the colour of the wrap. The leaves themselves are incredibly realistic, using irregular patterns and shapes like they would appear in nature so as to fool even the most eagle-eyed of opponents.

It doesn't interrupt the controls of the replica, allowing you to easily manoeuvre the bolt handle and still being able to collapse the stock to the side. The wrap is also fully customisable with Novritsch's Leaf Camo System line or you could even blend real foliage you find on the skirmish field and thread it through the tough, anti-rip mesh system.

Blend into the skirmish surroundings for an unparalleled sniping experience. Novritsch brings their Airsoft sniping expertise to the world of camouflage to take your gameplay to the next level. The  Novritsch 3D Camo Cover - SSG10 A3 is a realistic rifle wrap, which is stretchable and fully adjustable to cover your rifle without getting in the way of your controls or vision.

Designed for use with the SSG10 A3 platform, the cover is easily applied and tightened around your gun using adjustable drawstrings that match the colour of the wrap. The leaves themselves are incredibly realistic, using irregular patterns and shapes like they would appear in nature so as to fool even the most eagle-eyed of opponents.

It doesn't interrupt the controls of the replica, allowing you to easily manoeuvre the bolt handle and still being able to collapse the stock to the side. The wrap is also fully customisable with Novritsch's Leaf Camo System line or you could even blend real foliage you find on the skirmish field and thread it through the tough, anti-rip mesh system.

If you're looking for a flashlight mount for your SMR-style handguard, the WADSN SMR Rail Offset Mount for M300/600 Scout Flashlights is ideal. This mount is constructed from CNC aluminium with steel mounting hardware and designed to mount SF Scout (M300 and M600) flashlights to Geissele Super Modular Rail (SMR) style attachment slots.

The mount offers several mounting positions for your Scout Light, allowing for 3 different heights so you can get your accessories perfectly positioned. The mount also allows for mounting with a slight forward extension to defeat "suppressor shadow" or mounting at the rear to keep the light away from your muzzle, depending on how you install your Scout Light. This mount is only for standard SF M300 and M600 Scout Lights and won't fit the Scout Light Pro series due to its differing mount.

If you're in search of flashlight mounting solutions for the rare but super-slick SMR handguard, the WADSN SMR Rail Offset Mount for M300/600 Scout Flashlights is what you need!

If you need to load up on MPX magazines you have found what you need! This 100rnd Mid Cap Magazine is designed for the SigAir/VFC MPX AEG and is a rattle free mid-cap design which holds 100 6mm BBs. The fill/feed port is located at the top of the magazine and it can be loaded using a standard Airsoft speed loader or loading tool.

This magazine design perfectly mimics that of the real thing, including its clear polymer body and detailed mock 9x19mm cartridges visible through the body. The sides, front and rear boast moulded in gripping texture to avoid potentially dropping or throwing the magazine during a reload in wet weather and these can do double duty as a makeshift grip for shooting in unconventional positions. On the left side of the magazine we are also treated to licenced trademarks, with "SIG SAUER 9x19" proudly displayed in recessed lettering. If one could call a magazine beautiful, it would be this one!

An Airsoft 6mm BB Electric Powered AEG Gun, designed and based off the SIG 550, and was used by the Swiss Armed Forces.

The Action Army AAP-01 Assassin GBB Pistol already has an almost cult following already, and for great reason! This Airsoft Pistol offers incredible performance (especially in cold weather), an absolutely massive backlog of compatible accessories and upgrades, accepts incredibly common EU Series Magazines and is sold at an amazingly competitive price. We may say this a lot, but trust us when we tell you that "you don't want to miss this."

If you need somewhere to stash your sniper rifle magazines, Novritsch has what you need! The Full Seal MOLLE Pouch for SSG96/24 Sniper Rifle holds a single M24, L96, SSG96 or SSG24 magazine and is a full seal design which keeps your magazine secure during energetic movement. 

The pouch mounts to MOLLE webbing found on chest rigs, plate carriers, tactical vests, belts and backpacks and can be positioned wherever you like, as long as you can reach it when needed!

If you need somewhere to stash your sniper rifle magazines, Novritsch has what you need! The Full Seal MOLLE Pouch for SSG96/24 Sniper Rifle holds a single M24, L96, SSG96 or SSG24 magazine and is a full seal design which keeps your magazine secure during energetic movement. 

The pouch mounts to MOLLE webbing found on chest rigs, plate carriers, tactical vests, belts and backpacks and can be positioned wherever you like, as long as you can reach it when needed!

If you need somewhere to stash your sniper rifle magazines, Novritsch has what you need! The Full Seal MOLLE Pouch for SSG96/24 Sniper Rifle holds a single M24, L96, SSG96 or SSG24 magazine and is a full seal design which keeps your magazine secure during energetic movement. 

The pouch mounts to MOLLE webbing found on chest rigs, plate carriers, tactical vests, belts and backpacks and can be positioned wherever you like, as long as you can reach it when needed!

If you need somewhere to stash your sniper rifle magazines, Novritsch has what you need! The Full Seal MOLLE Pouch for SSG96/24 Sniper Rifle holds a single M24, L96, SSG96 or SSG24 magazine and is a full seal design which keeps your magazine secure during energetic movement. 

The pouch mounts to MOLLE webbing found on chest rigs, plate carriers, tactical vests, belts and backpacks and can be positioned wherever you like, as long as you can reach it when needed!

If you need somewhere to stash your sniper rifle magazines, Novritsch has what you need! The Full Seal MOLLE Pouch for SSG96/24 Sniper Rifle holds a single M24, L96, SSG96 or SSG24 magazine and is a full seal design which keeps your magazine secure during energetic movement. 

The pouch mounts to MOLLE webbing found on chest rigs, plate carriers, tactical vests, belts and backpacks and can be positioned wherever you like, as long as you can reach it when needed!

If you are the type of player who uses a full loadout of midcaps, and you want to reload and get ready for the next game in just a few seconds, we have a treat for you! Introducing the M12 Sidewinder Speed Loader from PTS Syndicate, an ultra quick crank wound speed loader which can load a midcap in an astonishing 4 seconds of winding! This speed loader has a whopping 1600 round capacity, and is widely known for its reliability.

If you are the type of player who uses a full loadout of midcaps, and you want to reload and get ready for the next game in just a few seconds, we have a treat for you! Introducing the M12 Sidewinder Speed Loader from PTS Syndicate, an ultra quick crank wound speed loader which can load a midcap in an astonishing 4 seconds of winding! This speed loader has a whopping 1600 round capacity, and is widely known for its reliability.