All Airsoft Assault Rifles

This Airsoft gun is a replica of the famous L85 / SA80 used by the British Armed Forces as their standard issue rifle. This Airsoft replica is G&G's offering into the L85 replica range, and features their new ETU and MOSFET systems allowing the use of 11.1v LiPo for a reliable rate of fire and easy trigger pull, and to top it all off: electric blowback.

If you're into retro loadouts and need the most authentic Mk 18 MOD 0 build around, you've just found it! The CYMA CGS Colt Mk 18 MOD 0 10.5" GBBR boasts official licencing from Colt via Cybergun and is a flawless replica of the original Mk 18, even down to the correct M16A1 lower receiver and 10.3-inch barrel setup.

Inside, the Mk 18 MOD 0 is significantly upgraded, packing a steel bolt carrier, steel trigger group parts, steel bolt catch and adjustable hammer; allowing you to tune power to get right within site limits. Also inside is a 6.03mm tightbore inner barrel, giving you an accuracy edge when compared to standard 6.08mm bores. Being based on the TM ZET system internal design, this thing will shoot like a beast, with even heavier recoil than the original TM!

If you want a modern AK variant but you want it light for a fast moving playstyle, this one will do the trick! The SA-J72 from Specna Arms is designed to replicate the real steel AKS-74M, a modernisation of the AKS-74, the original side folding AK rifle. This AK uses the VFC style of external construction, meaning pins and rivets instead of screws, a skeleton side folding stock made from steel and as close as is possible to realistic disassembly with an AEG.

The SA-J72 weighs a mere 2.5kg approximately, and Specna gets away with this with a high density polymer receiver, gas tube and gas block which has the added benefit of increasing the rifle's resistance to scratches. We have been waiting for a modern AK in the featherweight category, and finally, it is here!

Are you looking for a reliable M4 to help you in your skirmishes, or maybe you're a veteran looking for an affordable AEG to pimp out with your own upgrades, if so, the Specna Arms SA-C25 CORE™ HAL¹ ETU™ M4/AR-15 AEG is exactly what you're searching for! It's more compact than the original SA-C25 with its PDW stock, perfect for staying versatile on the battlefield.

This SA-C25 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for a beginner-level price point!

If you're new to Airsoft and want to start with something a bit more advanced than the average M4, the Delta Armory DA-C02-ETU CHARLIE™ M4/AR-15 CQBR AEG should suit your needs! This M4 CQBR AEG is constructed primarily from high-density polymer, just like the original DA-C02, but unlike the original, this version is rocking the ALPHA™ ETU series internals, flawlessly marrying a lightweight and agile build with a lightening fast trigger response and the ability to program the trigger for binary trigger or burst mode.

The ETU isn't the only thing added to the DA-C02-ETU; we are also treated to 16:1 ratio CNC steel gears, CNC aluminium cylinder group parts, a 6.03mm tightbore inner barrel with a high torque Neodymium magnet motor to top it off. The result is a surprising trigger response and intense rate of fire, usually reserved for AEGs twice this price! If you want all of the performance but none of the weight of the Delta Armory ALPHA ETU series, the DA-C02-ETU CHARLIE™ M4/AR-15 CQBR AEG provides exactly that!

If you like the looks and ambidextrous functionality of the ARCTURUS E3 Rifle but you prefer a shorter package, the E3 Carbine is the same thing but with a 10.5-inch outer barrel, making it ideal for close-quarters use, and those who like to play aggressively and close ground with the enemy! Like the E3 Rifle, the E3 Carbine boasts full metal construction, well thought out pre-upgraded ARCTURUS internals, an intimidating looking compensator and M-LOK/Picatinny hybrid handguard up front.

The impressive internal spec includes a 6.03mm steel tightbore inner barrel, rotary HOP-up unit, microswitch trigger and a thoughtfully built gearbox with low friction components. The E3 Carbine is perfect for any aggressive player who wants all the options when it comes to accessories, and will make use of the wealth of QD sling points across this modern M4/AR-15 platform!

If you have a thing for modernised American AKs, this one should be up your street! The EMG Rifle Dynamics RD-701 AEG; Kestrel Basic ETU is absolutely packed with pre-upgraded internal parts and boasts licensed trademarks from Rifle Dynamics with detailed replica Rifle Dynamics parts across the design. Boasting some incredible pre-upgraded parts from the CYMA Platinum Edition rifles, this AK variant is absolutely devasting in-game and to make matters all the sweeter is equipped with an internal tracer unit mounted to the HOP-up and powered by the AEG's battery.

The tracer HOP-up is a rare addition to stock Airsoft rifles, usually a rare innovation only found on the aftermarket and requiring a certain amount of expertise to wire in. An impressive feature made even better in combination with this RD-701's other upgraded parts and flawless build quality. The RD-701 boasts full metal construction with a large proportion of steel in the build, a 6.03mm tightbore inner barrel, a high-speed Neodymium magnet motor and much, much more!

so, if you fancy treating yourself to an AK platform, the EMG Rifle Dynamics RD-701 AEG is a great high-performance option, plus, its party trick of lighting up tracer BBs without an aftermarket tracer unit required!

If you know real steel and like the NOVESKE aesthetic, you need to check this out! The EMG Noveske 13.7" Gen.3 INFIDEL AEG; Kestrel Basic ETU is a longer version of similar rifles like the DIPLOMAT and is is a perfect replica of the real steel Noveske Infidel Gen.3, a dynamic modern rifle beloved for its style and superior performance.

On the outside, we are treated to a full metal build with flawlessly engraved Noveske trademarks, a detailed replica of the Noveske KX3 Firepig flash suppressor, NSR 9" M-LOK handguard and "Super Badass" charging handle and the iconic Noveske silver outer barrel to add a hint of contrast to this high-end AR build.

Internally, the INFIDEL is equipped with the legendary CYMA Platinum internals, complete with the Kestral Basic ETU, just to top it off. For superior performance, this AEG is equipped with 13:1 ratio high-speed CNC gears, a high-speed motor and a quick change spring system for easy power tuning. The inner barrel is a 6.03mm tightbore paired with an alloy rotary HOP-up unit, leaving you with little left to do in terms of upgrades. It comes straight out of the box laser accurate and lightning fast!

If you know real steel and like the NOVESKE aesthetic, you need to check this out! The EMG Noveske 13.7" Gen.3 INFIDEL AEG; Kestrel Basic ETU is a longer version of similar rifles like the DIPLOMAT and is is a perfect replica of the real steel Noveske Infidel Gen.3, a dynamic modern rifle beloved for its style and superior performance.

On the outside, we are treated to a full metal build with flawlessly engraved Noveske trademarks, a detailed replica of the Noveske KX3 Firepig flash suppressor, NSR 9" M-LOK handguard and "Super Badass" charging handle and the iconic Noveske silver outer barrel to add a hint of contrast to this high-end AR build.

Internally, the INFIDEL is equipped with the legendary CYMA Platinum internals, complete with the Kestral Basic ETU, just to top it off. For superior performance, this AEG is equipped with 13:1 ratio high-speed CNC gears, a high-speed motor and a quick change spring system for easy power tuning. The inner barrel is a 6.03mm tightbore paired with an alloy rotary HOP-up unit, leaving you with little left to do in terms of upgrades. It comes straight out of the box laser accurate and lightning fast!

If you're in the market for a MK18 and you want the latest version, the EMG Daniel Defense DD4™ MK18 RIII 10.3" AEG is exactly what you need! This full metal M4/AR-15 AEG boasts official licensing from Daniel Defense and is a perfect match for the latest MK18 style rifle in the DD4™ series, including flawless replicas of the MK18 RIS III handguard, the "Grip-N-Rip" charging handle, "Tornado" pistol grip and DD Buttstock. This thing is all Daniel, and we love it!

This beast is manufactured by CYMA Platinum for EMG, meaning we are treated to some of the best out-of-the-box internals around. Inside, you will find a high-speed Neodymium magnet motor driving a 13:1 CNC steel high-speed gearset running on 8mm ball bearing bushings, kept in check by the CYMA Platinum MOSFET. The cylinder and piston heads are both the silent types, CNC machined from aluminium for maximum strength and flawless air seal. The inner barrel is also a 6.03mm tightbore, giving you an accuracy edge and the ability to challenge long rifles in the great outdoors.

The highlight of this AEG is the Kestrel Basic ETU, which offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. The Kestrel keeps your gearbox cycling at maximum efficiency. Whether you're a Daniel Defense fan or looking for a modern, M-LOK-equipped platform with gorgeous ergonomic furniture and build quality to rival the best, or you need a pre-upgraded beast of a primary, the Daniel Defense DD4™ MK18 RIII 10.3" AEG; Kestrel Basic ETU from EMG is perfectly suited to your needs!

This Airsoft Electric Gun is a perfect choice for any kind of player, from absolute beginner all the way up to seasoned pro. Thanks to an absolute tonne of features and up-rated internals, this Airsoft Replica offers incredible value for money out the box. With features like a 6.01mm Inner Barrel, Reinforced Steel Gears, Rotary HOP Unit, Quick Remove Spring Guide and more, all for the price of a CM16 Raider, the Evolution Airsoft Recon S Carbontech w/ Superlite Carbontech™ KeyMod Rail System is absolutely ideal.

This Airsoft Electric Gun is a perfect choice for any kind of player, from absolute beginner all the way up to seasoned pro. Thanks to an absolute tonne of features and up-rated internals, this Airsoft Replica offers incredible value for money out the box. With features like a 6.01mm Inner Barrel, Reinforced Steel Gears, Rotary HOP Unit, Quick Remove Spring Guide and more, all for the price of a CM16 Raider, the Evolution Airsoft Recon S Carbontech w/ Superlite Carbontech™ KeyMod Rail System is absolutely ideal.

If you're into firearms of recent times, you'll love the Delta Armory DA-C010 AEG! It has similar styling to the current military KS-1 rifle, just half the size and a compact suppressor on the front, making it perfect for CQB environments. On the outside, the DA-C10 is made primarily from high-density polymer with an M-LOK handguard, 14mm CCW threaded barrel, and 20mm Picatinny railed receiver, ready to be kitted out!

Inside the DA-C10 is a 6.03mm tightbore inner barrel paired with a rotary HOP-up, offering superb performance at long range and the ability to tune for different ammo weights. If you're after a low-cost, high-performance M4/AR-15 platform which is ready to rock with the most modern accessories, the Delta Armory DA-C10 CHARLIE™ 8" M-LOK SilentOps M4/AR-15 AEG is an excellent choice!

If you are keeping your eye out for an M4 platform AEG which combines low weight with a long barrel for superb outdoors performance you can put it back in again, you have found a great option! The CM.612 from CYMA sports the usual rock solid internals from the CM.6xx M4 series but with a 16 inch outer barrel and the gorgeous KAC style URX-2 quad rail system to give it a dynamic and high speed look. The CM.612 would be an asset in an outdoors skirmish thanks to its long 6.03mm tightbore inner barrel, offering accuracy and range which is unattainable for shorter setups. If you do the majority of your Airsoft *beep* whipping in the woods, this AEG would suit you well.

If you're after a beginner-friendly M4/AR-15 AEG with a cutting-edge aesthetic, the Delta Armory DA-C08 CHARLIE™ 8" M-LOK M4/AR-15 AEG is one to watch. Made from high density polymer with an alloy outer barrel, this build is super light and agile, fantastic for younger players with limited physical strength, though the lightweight build does not necessarily mean compromise!

On the outside, the DA-C08 is rocking an M-LOK handguard with 20mm rail sections pre-installed and a 20mm Picatinny railed receiver, ready for a red dot sight, scope or any other accessory you choose to mount. The outer barrel is threaded to 14mm CCW, meaning common suppressors and tracer units will mount with minimal fuss. Internally, things are equally impressive!

The DA-C08 is based around the common V2 gearbox with an alloy shell, 18:1 ratio steel gears running on 8mm bushings and a reinforced SHS tappet plate and piston with a full steel tooth rack. The inner barrel is a 6.03mm tightbore paired with a rotary HOP-up, giving you the kit you need to get good effect on targets downrange. With a compact CQB-friendly form, pre-upgraded internals and full aftermarket compatibility, the DA-C08 CHARLIE™ from Delta Armory is a fantastic starter AEG or base for a custom build!

If you have been planning to get yourself an AK and give it a full internal overhaul, why not save yourself the trouble? The SA-J02 EDGE™ from Specna Arms comes with a vast number of upgraded parts already installed, including an alloy HOP-up unit, flat HOP-up bucking, 6.03mm tightbore inner barrel and of course, the impressive Gate ASTER™ MOSFET.

Coupling these parts with the well regarded ORION™ reinforced version 3 gearbox leaves you with very little left to consider upgrading, and to top things off, the SA-J02 is constructed almost entirely from steel with well-finished real wood furniture, giving it the substantial feel in the hands that an AK should have. For a perfect replica AK-74 that shoots as good as it looks, you couldn't ask for better!

If you want to get into Airsoft skirmishing but don't know where to start, start here! The Delta Armory CHARLIE™ Full Starter Pack includes the DA-B04, a lightweight, pre-upgraded M4/AR-15 AEG with a sneaky style, two additional mid-cap magazines and everything else you need to get busy in game!

The set includes the DA-B04, 2 extra 120rnd Mid-caps, a Tactical Vest, a pair of NUPROL Pro Mesh Goggles, a NUPROL Tactical Half Face Mask, a speed loader, Delta Armory 0.25g BBs, a Ni-MH battery, charger & a Battery charging bag; giving you everything you need to get off to a flying start on your Airsoft adventure. We recommend a Gun Bag or Hard Case to transport your pride and joy and some good footwear, but other than that, you are good to go!

If you're into the 416 vibe but want something more modern and swift to point, the Specna Arms SA-PH22 PRIME™ M-416 RAHG 14.5" AEG is one to watch. Part of Specna's impressive PRIME™ range, the SA-PH22 is packed with pre-upgraded parts and designed to compete with the very best Airsoft has to offer, with no need for additional upgrades or tuning. Some of these upgrades include a powerful Dark Matter™ brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings, CNC aluminium cylinder group parts and a reinforced tappet plate for reliable feeding.

The PRIME™ is Specna's newest line of AEGs. They have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to enhance performance, improve consistency and increase rate of fire. The highlight of this AEG is the option to choose either the Gate ASTER II Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and offering programmable firing modes. Which you choose depends on your needs; the ASTER II is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL version is great for users who prefer an easier-to-use yet still advanced MOSFET!

A sleeker, more agile alternative to the hefty quad-rail equipped 416, the Specna Arms SA-PH22 PRIME™ M-416 RAHG 14.5" AEG is certain to turn heads on the field, even more so when you shoot it! If you're after an ultra-modern AR setup with pre-upgraded internals to rival the best, the SA-PH22 is the ideal choice!

If you're into the Daniel Defense look but want something a bit different, check out the EMG Daniel Defense DDM4® V7 AEG! Based on the real steel DDM4 V7P, this M4/AR-15 AEG is rocking a unique folding stock adapter inspired by the real steel LAW Tactical folding stock, meaning it can fit into smaller gun bags and can cut corners tighter than other ARs, ideal for CQB!

Up front, we have a fantastic replica of the real steel DD MRF 9.0, a dynamic free-floated M-LOK handguard made from CNC aluminium and bristling with licenced Daniel Defense trademarks. The receiver also sports finely engraved DD markings and is equipped with the EMG Alpha 19 ergonomic grip, a comfortable grip design made from superb quality high density polymer. 

Inside, we have the APS Silver Edge II gearbox, a V2 gearbox equipped with 18:1 CNC steel gears, a polymer piston with a full steel tooth rack, a double O-ring cylinder head and stainless steel cylinder. The spring guide is a quick change example, allowing for easy power tuning, and the motor is a 24K high torque, meaning a snappy response rate and respectable rate of fire. Also inside is the APS Micro-FET, an in-line MOSFET designed to prevent trigger lockups and improve electrical efficiency, translating into even more speed downrange. 

Whether you have limited space, like folding things or want a licenced Daniel Defense AR AEG which no-one else has, the EMG Daniel Defense DDM4® V7 AEG should be in your sights! Well equipped both inside and out with a super unique folding stock no other AR has, the DDM4 V7 is the MK18's dynamic-looking, speedy brother!

If you're seeking a solid starter platform with plenty of upgrade potential down the line, you're in good hands with the S&T M4/AR-15 CQBR Sports Line AEG; ETU Version! This M4 AEG is made predominantly from high-density polymer with an alloy outer barrel and a mix of alloy and steel trim parts, keeping agility at maximum and making it ideal for younger skirmishers or those with less physical strength.

On the inside, the S&T CQBR features an alloy version 2 gearbox with a modern Rotary HOP-up unit, setting it up to be competitive and upgrade-compatible without overcomplicating things by reinventing the wheel. The inner barrel is also a 6.02mm tightbore example, promising above-average accuracy potential when used with high-quality BBs. This updated version now also features an in-line MOSFET and low-resistance wiring, giving it improved electrical efficiency and a super snappy trigger response in semi-auto.

For new skirmishers looking for a platform with easy handling, wide compatibility, upgradable internals and impressive performance as it comes, the S&T M4/AR-15 CQBR Sports Line AEG; ETU Version is a superb option. Even experienced Airsofters accustomed to full metal builds will appreciate this lightweight yet high-quality build!

If your budget is tight but you need an accessory-ready primary with a MOSFET on board, the S&T M4/AR-15 URX4 11.5" Sports Line AEG; ETU Version should be on your shopping list! Made from strong high density polymer with an alloy outer barrel and a mix of alloy and steel trim parts, the URX4 11.5" makes a fantastic multi-role primary for newcomers, ready to be dressed up with the most modern accessories out there with suprising performance to back it up!

On the inside, the S&T URX4 9.5" features an alloy version 2 gearbox with a modern Rotary HOP-up unit, setting it up to be competitive and upgrade-compatible without overcomplicating things by reinventing the wheel. The inner barrel is also a 6.02mm tightbore example, promising above-average accuracy potential when used with high-quality BBs. This updated version now also features an in-line MOSFET and low-resistance wiring, giving it improved electrical efficiency and a super snappy trigger response in semi-auto, ideal for gaining the edge in CQB environments.

Whether this will be your first Airsoft gun or you're adding a lightweight option to a collection of full metal guns, you're in good hands with the S&T M4/AR-15 URX4 11.5" Sports Line AEG; ETU Version. Feature-packed at a remarkable price and fully upgradable with the most common upgrade parts, the URX4 11.5" Sports Line makes an excellent backup or a solid starting point to your Airsoft adventure!

If you're going for a special forces style loadout but don't have planetoid-sized biceps, the S&T ST416D Sports Line AEG; ETU Version should be right up your street! Constructed almost entirely from high-density polymer, the ST416D is a great choice for those with less physical strength or those with a fast-moving playstyle seeking a platform as agile as they are. High-density polymer may be less realistic, but it will not show damage as readily as a full metal platform might, thanks to its dyed nature, allowing it to maintain its looks far better than a painted or anodised finish.

On the inside, the ST416D features an alloy version 2 gearbox with a modern Rotary HOP-up unit, setting it up to be competitive and upgrade-compatible without overcomplicating things by reinventing the wheel. The inner barrel is also a 6.02mm tightbore example, promising above-average accuracy potential when used with high-quality BBs. This updated version of the ST416D now also features an in-line MOSFET and low-resistance wiring, giving it improved electrical efficiency and a super snappy trigger response in semi-auto.

Having all of these features in such an affordable platform makes the S&T ST416D Sports Line AEG; ETU Version a sure hit for beginners or veterans looking for a lightweight "easy mode" primary!

An electric powered 6mm Airsoft M4 styled weapon that is majoritively made from high density Polymers to keep the weight down, and after a few hours of carrying around you'll be thanking them for it!

The EVOLUTION S Recon M EMR S ETS is another excellent AR15 platform offering a range of top-notch qualities, a great choice for the player looking to tech-up their set-up.

The EVOLUTION S Recon M EMR S ETS is another excellent AR15 platform offering a range of top-notch qualities, a great choice for the player looking to tech-up their set-up.

If you're looking for an AEG packed with pre-upgraded parts based on a cutting-edge real steel design, the Specna Arms SA-PH23 PRIME™ M-416 RAHG 10" AEG should be right up your street! Building on the previous EDGE 2.0 variant, the internals of the SA-PH23 have been completely revamped to make this AEG a force to be reckoned with. Some of these alterations include a powerful Dark Matter™ brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding.

The PRIME™ is Specna's newest line of AEGs. They have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG is the option to choose either the Gate ASTER II Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and offering programmable firing modes. Which you choose depends on your needs; the ASTER II is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL version is great for users who prefer an easier-to-use yet still advanced MOSFET!

An advanced platform both inside and out, the M-416 RAHG is ideal for US Navy SEAL Operation Neptune Spear loadouts or any other modern special forces loadout, bringing high-end looks along with insane performance to the table. If you're after an eye-catching AR-derived AEG with internals to contend with the best, the Specna Arms SA-PH23 PRIME™ M-416 RAHG 10" AEG belongs in your arsenal!

Where my milsim bois at? The East Crane EC-202 M-417 DMR is the marksman rifle you have been looking for, whether you run a UKSF, Delta or any other SF loadout! Boasting full metal construction, a quick change spring system and a programmable MOSFET capable of semi-automatic only, the EC-202 is ready for whatever role you place it in, but we think it would make a beast of a DMR!

With a 6.04mm Tightbore inner barrel, rotary HOP-up unit, version 2.5/version 2 long gearbox and CHONKY 7.62x51mm style magazines, the EC-202 is kitted out for long range skirmishing, whether you push it up to DMR limits or not. On the outside, we have more 20mm Picatinny rails than we will ever need, a 14mm CCW male threaded barrel, ready for a suppressor or tracer and a snag-reducing low-profile stock with full adjustability for ease of movement. Wack a big scope on this bad boy and get to work!

This Airsoft gun is a replica of the famous L85 / SA80 used by the British Armed Forces as their standard issue rifle. This Airsoft replica is G&G's offering into the L85 replica range, and features their new ETU and MOSFET systems allowing the use of 11.1v LiPo for a reliable rate of fire and easy trigger pull, and to top it all off: electric blowback.

If you're a realism seeker looking for the next step up from an AEG, the WE M4A1 Open Bolt GBBR; V3 System has your name on it! A considerable improvement over the previous WE Open Bolt M4 GBBR, the V3 improves reliability with choice steel internals, reinforcement in key places and a full internal redesign resulting in better rapid fire performance and long-term durability.

The most notable redesigns are its steel valve knocker and steel bolt catch contact surface, solving known issues with WE's previous designs and avoiding the immediate need for upgrades or bodge jobs. The trigger group has also been considerably reinforced, but the inner barrel and HOP-up bucking are still GBB/VSR spec, giving you access to some of the best upgrade parts in the business if you want to improve accuracy and range. The stock inner barrel is also now a 6.04mm tightbore, replacing the 6.08mm standard bore barrel of the previous version.

If you prioritise realism and like to work hard in-game like the real warriors do, the WE M4A1 Open Bolt GBBR; V3 System should be on your shopping list. With realistic 30-round magazines, violent recoil and a manual of arms almost identical to the real M4A1, this is a primary for the pros!

If you're into WW2 reenactment or like to collect the most iconic firearms replicas around, the A&K M1 Garand AEG belongs in your arsenal! A gorgeous replica made entirely from metal and real wood, this hefty, authentic piece is a bit of a rarity on Airsoft fields but comes with more than its fair share of performance perks!

Inside, the M1 is based around a TM spec version 7 gearbox with an alloy shell, 18:1 ratio steel gears, 6mm bushings and a quick change spring guide for easy power tuning. The inner barrel is a 6.05mm tightbore for an accuracy and air-efficiency edge, and the HOP-up unit is an alloy rotary design, offering easier adjustments than the TM M14 it is based on, with full aftermarket AEG HOP-up bucking and inner barrel compatibility.

As suitable for display on the man-cave wall as it is for sending semi-auto shots out to range in a reenactment scenario, this detailed and hefty M1 Garand replica fills a niche which is often underserved in Airsoft. If you're working on a WW2 US G.I. loadout or need an impressive looking M1 to fill out the gun wall, the A&K M1 Garand AEG; Real Wood is just the thing!