All Airsoft Assault Rifles

We have all been drooling over the real KelTec RDB for years. The RDB is one of the most advanced bullpup rifles in existence and eliminates the hand full of downsides to bullpups that have people wandering around carrying rifles that are too long. It feels like a part of your body when you hold it, with extreme pointability due to the center of balance being around the middle of the receiver. With a steel receiver, high-density polymer parts, and a comfortable rubber buttplate, this AEG is nearly indistinguishable from the real thing, as we have come to expect from ARES. 

A highly realistic AEG replica of the infamous SCAR platform Assault Rifle, which served as a much-needed update to the AR platform. This top-shelf Tokyo Marui product features a hard-kicking Mechanical Recoil and a realistic Bolt-Stop function which stops the gun from firing when you're out of BBs.

If you're hunting for a super-compact GBBR for close-quarters work, the EMG CGS Daniel Defense DDM4® PDW GBBR should be in your sights! This full metal M4/AR-15 GBBR platform is based on the real steel Daniel Defense DDM4 PDW, a real steel AR "pistol" designed for use in tight quarters and when moving in and out of vehicles. Naturally, this beast is licenced by Daniel Defense, rocking immaculately engraved trademarks across the design, only deviating from the real thing in its inclusion of an actual stock instead of the "pistol stabilising brace" found on the real thing to please the ATF.

Inside, the DDM4 PDW GBBR is based on the Tokyo Marui ZET system, the best of the best when it comes to GBBR internal design. CGS has added a steel bolt carrier, steel trigger parts and a short stroked buffer into the mix, meaning enhanced strength in all the key areas and an absolutely killer rate of fire, especially compared with other GBBRs.

If you're into GBBR platforms and need something honed for CQB, you can't ask for much better than the EMG CGS Daniel Defense DDM4® PDW GBBR! With a snappy trigger response, above-average rate of fire, fantastic build quality and internals based around the best of the best in the GBBR world, this thing is one to watch in close quarters!

If you're hunting for a super-compact GBBR for close-quarters work, the EMG CGS Daniel Defense DDM4® PDW GBBR should be in your sights! This full metal M4/AR-15 GBBR platform is based on the real steel Daniel Defense DDM4 PDW, a real steel AR "pistol" designed for use in tight quarters and when moving in and out of vehicles. Naturally, this beast is licenced by Daniel Defense, rocking immaculately engraved trademarks across the design, only deviating from the real thing in its inclusion of an actual stock instead of the "pistol stabilising brace" found on the real thing to please the ATF.

Inside, the DDM4 PDW GBBR is based on the Tokyo Marui ZET system, the best of the best when it comes to GBBR internal design. CGS has added a steel bolt carrier, steel trigger parts and a short stroked buffer into the mix, meaning enhanced strength in all the key areas and an absolutely killer rate of fire, especially compared with other GBBRs.

If you're into GBBR platforms and need something honed for CQB, you can't ask for much better than the EMG CGS Daniel Defense DDM4® PDW GBBR! With a snappy trigger response, above-average rate of fire, fantastic build quality and internals based around the best of the best in the GBBR world, this thing is one to watch in close quarters!

If you dream of a beastly DMR build but don't want the hassle of building one yourself, the Bolster Tuned EMG Daniel Defense M4A1 RIII™ DMR Upgraded AEG is your best option! Based on the already impressive EMG Daniel Defense M4A1 RIII™ 14.5" AEG but ram-packed full of upgrade parts and tuned to absolute perfection, the Bolster Tuned M4A1 RIII™ is locked to semi-automatic and hits out at an impressive 410 FPS with a 0.2g BB, ready for DMR duty!

On the outside, the EMG M4A1 RIII™ is practically the perfect DMR base gun, with enough length for the DMR look paired with a light and agile RIS III M-LOK handguard, ergonomic Daniel Defense Buttstock and gorgeous licenced Daniel Defense trademarks. As part of the Bolster Tuned upgrade process, the original pistol grip has been swapped out for the popular PTS Syndicate EPG pistol grip, offering the improved strength of Dupont Zytel polymer and a motor engagement angle more suitable for upgraded builds with high performance parameters.

Inside, you'll find a Gate ASTER™ MOSFET paired with the Gate QUANTUM™ CNC trigger, offering over 470 trigger sensitivity adjustment options along with the usual advanced ASTER features. The standard ball bearing bushings have been swapped out for Bolster Armouries EZO Bearings for a longer lifespan and an FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding and the strength to handle the high power main spring.

To get your BBs way out there and onto target, a Tru-Hop Gen.3 HOP-up bucking paired with a Maple Leaf OMEGA nub was installed, giving you impressive accuracy for a high first-round-hit probability. The Warhead 45K Base Brushless Motor and a Laylax EG 18:1 Hard Gear Set provides the durability, torque and heat dissipation qualities for peak efficiency, shocking trigger response and a long lifespan of reliable performance.

With a scary-fast trigger response, exceptional range and the ability to hit small targets out to 60 meters and beyond, this isn't just a high FPS platform locked to semi; each and every Bolster Tuned M4A1 RIII™ DMR is hand-assembled, tuned to perfection and put through rigorous testing on our 65m range. If it doesn't meet the Bolster standard, it doesn't leave the workbench until it does!

Small but mighty! That's one way to describe the Specna Arms SA-B02 ONE™ Mk.18 CQBR AEG; Kestrel Basic ETU, for what it lacks in large stature, it more than makes up for with its construction and performance. This Mk 18 is the perfect companion for any CQB skirmisher, the railed handguard allows for ultimate customisation and the preinstalled MOSFET allows for some serious snappy trigger response.

The Kestrel Basic ETU offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. Put simply, this allows the SA-B02 ONE™ to be set up realistically as SAFE-SEMI-3RND BURST, keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. Paired with Specna's standard 6.03mm tightbore inner barrel and rotary HOP-up unit, this is one of the best-equipped Mk.18 AEGs on the market!

If you are building a special forces loadout for your CQB skirmishes and you're in search of a compact Mk.18 to match the look, the Specna Arms SA-B02 ONE™ M4 Carbine AEG; Kestrel Basic ETU is the Airsoft replica for you!

If you want the gucci look but you don't want to part with those gucci bucks, Double Bell has something you may like! The BY-817 M-416 A5 AEG is styled to match a certain real-world rifle we all know and love and boasts full metal construction, fantastic attention to detail and pre-upgraded internals including a 6.03mm tightbore inner barrel, reinforced steel gears and a quick change spring system for easy power tuning.

As with the latest iteration of the real rifle, the Double Bell AEG is also rocking a full set of ambidextrous controls, making this a fantastic platform for left-handed shooters and those who use shoulder-to-shoulder transitions to make the best use of surrounding cover. Whether you run a special forces loadout or you are looking for a lefty-friendly AR platform with an elite look, the Double Bell M-416 A5 should suit you perfectly!

Perhaps you have heard of the MK16? No, not the SCAR MK16, the other one! The ARCTURUS MK16 Saber is a near perfect replica of one of the latest and greatest custom AR platforms to come from the real steel shooting world in the US. The Saber marries ARCTURUS' high end internals with an ultra modern external look, boasting full metal construction and a large proportion of steel parts.

The MK16 Saber is a full length M4 platform with a 14.5-inch outer barrel and a steel 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, making it a beast outdoors, and perhaps even a potential DMR with the right upgrades. If you choose to challenge yourself with a long rifle indoors, you can't do much better than the Saber; its super light aluminium handguard gives you plenty of space for a nice C-clamp grip, making it easy to steer between targets at an impressive pace. No matter what you plan to do with it, the MK16 Saber from ARCTURUS would make a great addition to your armoury!

If you're in search of a full metal MK18 replica with solid build quality and top-tier performance, the EMG CM.105 Daniel Defense MK18 MOD.1 AEG; Kestrel Basic ETU is one of the best options out there! Officially licenced by Daniel Defense via EMG, this full metal AR is rocking full DD trademarks, a superb replica of the RIS II quad rail handguard and CYMA's Platinum E-Edition internals, giving it museum-worthy looks and intense downrange effect.

Inside, you'll find a reinforced V2 gearbox with CNC steel 13:1 high-speed gears, a CNC aluminium ball bearing piston head, a CNC aluminium double O-ring cylinder head, 8mm ball bearing bushings and a high torque neodymium magnet motor. Also present inside is a 6.03mm tightbore inner barrel and alloy rotary HOP-up unit, giving you the range and accuracy to get the job done at long ranges. The pre-installed Kestrel Basic ETU adds some advanced functions into the mix, offering programmable fire modes including a 3-round burst and binary trigger and 6 levels of adjustable pre-cocking; a major improvement over the Zeus MOSFET of the original.

The perfect platform for a US Navy SEAL loadout with a mission-ready feature set with plenty of room for accessories, there are many reasons the MK18 MOD.1 platform is so favoured amongst Airsofters. This, the EMG CM.105 Daniel Defense MK18 MOD.1 AEG; Kestrel Basic ETU is one of the best out there, capable of going toe-to-toe with the best both in the tight confines of CQB and in outdoor environments!

H&K fans and US Army milsimmers, get excited now! The Umarex Heckler & Koch M110A1 SDMR AEG is the flawless DMR replica you've been waiting for! Based on the real steel HK M110A1 SDMR, an accurised HK417 derivative issued to the US Army as its latest marksman's rifle, the Umarex M110A1 boasts attention to detail bordering on the extreme and is pre-built as a semi-locked DMR hitting out at an impressive 410 FPS +/- 10% on 0.2g BBs.

On the outside, we are treated to a full metal build with a perfect replica of the issued Geissele SMR handguard, the latest H&K furniture and detailed H&K markings across the design, resulting in a breathtaking build which needs nothing but a scope and suppressor to be complete. Internally, the SDMR is rocking a 6.03mm tightbore inner barrel and an M120 spring, giving us superb consistency and efficiency straight out of the box. An in-line MOSFET provides a snappy trigger response thanks to improved electrical efficiency and protects the trigger contacts from corrosion in the long term.

If you're looking for your dream DMR and are the type that appreciates attention to detail, the Umarex M110A1 SDMR will be your new favourite replica. Even more so if you're into your modern US Army equipment!

The JG103 is a close replica of the real world MC51 rifle but in a new, modernised form. This MC51 variant comes with an RIS handguard to give the old gun a fresh feel and bring it into the modern era, scope rail ready to mount in the box, and a full stock to give the RIF a balanced look and a large battery compartment. The JG103 is a great multi-purpose AEG and is up to any task you set for it!

If you are a fan of bullpup rifles and you don't have an AUG in your collection you are missing out! The Army Armament R904 AUG Para is the short-barrelled version of the famous AUG assault rifle which has served with the militaries of Austria, Australia and New Zealand, and was also wielded by Karl, mercenary companion to Hans Gruber during their attempted take over of Nakatomi Headquarters in the 1988 movie Die Hard.

The R904 boasts full metal construction, a pre-installed MOSFET and an integrated 3x optical sight, and is a more modern iteration of the AUG with plenty of 20mm rails for the addition of accessories. Join the elite, equip yourself with an AUG and benefit from the improved handling, short length and long barrel of this fantastic Airsoft AEG version of a near perfect real world design!

Looking for an assault rifle with longer-range capabilities? The Delta Armory DA-A14 ALPHA™ 10" M-LOK M4/AR-15 AEG is here to satisfy that craving! Delta Armory brings the sharp style of real-life M4s and combines it with some premium internals to make it a fierce opponent on the battlefield both indoors and outdoors!

As with the other ALPHA™ line AEGs from Delta Armory, the DA-A14 boasts full metal construction with flawless machining. The internals of this AEG features an SHS piston with a full steel tooth rack, SHS tappet plate, rotary hop-up chamber and 6.03mm precision barrel. The advantage of this gun is the quick change QRS Gen. 2 spring - you change the spring without disassembling the gun. Whether you are going full DMR with this build or using it as it comes, you are very well-equipped for long-range warfare with the DA-A14!

Whether you need a long-ranged woodland primary or you're building a DMR, the Double Eagle M906A 16" M-LOK M4/AR-15 AEG is ideal for the task. This full metal M4/AR-15 platform is nice and long, with a 16-inch outer barrel and 15-inch M-LOK handguard and is kitted out internally with the FALCON EFCS MOSFET, a high torque motor and a tightbore inner barrel, giving you a head start over rival platforms and an external build destined for long ranged firefights.

Like other AEGs in the Double Eagle EFCS range, the build quality of the M906A is absolutely superb, making use of CNC machining for the handguard and with detailed yet discrete Double Eagle markings on the magazine well. All of the external controls are steel, and the stock and pistol grip are comfortable, ergonomic and modern designs. If you like sleek, modern AR platforms bristling with M-LOK, the M906A should be your next outdoors primary!

If you need a slick Airsoft assault rifle that's ready for any battle scenario, the ARCTURUS ARC FE™ AR-15 AEG is prepared for that duty! This full-metal AEG looks the business with its ultra-modern external look, as well as its pre-installed FE® ETU, which offers a range of programmable options using just the fire selector and trigger.

You can get this rifle in a carbine length, better suited for outdoors and longer ranges, or a CQB length, which is perfect for those tight corners in your local CQB site. Overall, this rifle is a great choice for any skirmisher who wants to pair a premium look with a premium performance!

If you need a slick Airsoft assault rifle that's ready for any battle scenario, the ARCTURUS ARC FE™ AR-15 AEG is prepared for that duty! This full-metal AEG looks the business with its ultra-modern external look, as well as its pre-installed FE® ETU, which offers a range of programmable options using just the fire selector and trigger.

You can get this rifle in a carbine length, better suited for outdoors and longer ranges, or a CQB length, which is perfect for those tight corners in your local CQB site. Overall, this rifle is a great choice for any skirmisher who wants to pair a premium look with a premium performance!

An Airsoft 6mm BB Gun Replica of the M14 Enhanced Battle Rifle, and is every bit as beautiful as it is heavy. The Rifle features a highly realistic construction, with an Alloy Receiver, Handguard, Outer Barrel, Flash Hider, Iron Sights, with a Polymer Handguard Covers, Pistol Grip, Stock and features all the bells and whistles you would expect from such a rifle. 

If you're looking for a solid, modern M4/AR-15 AEG fitted with some of the best stock internals out there, the CYMA Platinum CM.097A M4/AR-15 AEG; Kestrel Basic ETU is one to watch! The latest version of the original CM.097, this version is equipped with the EShooter Kestrel Basic ETU, the perfect compliment to its thoroughly upgraded Platinum E-Edition internals!

The Kestrel Basic ETU offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. The Kestrel keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. The other CYMA Platinum internals include 13:1 ratio high-speed gears running on 8mm ball-bearing bushings, a CNC aluminium "silent" ball-bearing piston head, double O-ring cylinder head, quick change ball-bearing spring guide and a high-speed motor to top it off! 

On the outside, the CM.097A is very well equipped, ready to host M-LOK or 20mm Picatinny accessories and equipped with a 14mm CCW male threaded outer barrel, ready for your tracer unit or suppressor. If you like the sound of a solid, proven high-performance M4/AR-15 AEG made even better with advanced, programmable firemodes, the CYMA Platinum CM.097A M4/AR-15 AEG; Kestrel Basic ETU will suit you perfectly!

An Airsoft 6mm BB Gun Replica of the M14 Enhanced Battle Rifle, and is every bit as beautiful as it is heavy. The Rifle features a highly realistic construction, with an Alloy Receiver, Handguard, Outer Barrel, Flash Hider, Iron Sights, with a Polymer Handguard Covers, Pistol Grip, Stock and features all the bells and whistles you would expect from such a rifle. 

Those looking for an affordable AEG they'll never need to upgrade, the Delta Armory DA-DIA-ARENA-A14 Diamond ALPHA™ 10" M-LOK M4/AR-15 AEG is exactly that! Building on the already very impressive Delta ETU series rocking ALPHA™ full metal externals, the Diamond 10" M-LOK M4/AR-15 is the top-of-the-line option from Delta, boasting a few internal changes from the original ETU version to refine

The best parts of the ETU series are present in this Diamond AEG, including a reinforced gearbox shell, a programmable ETU/MOSFET system, a CNC aluminium cylinder head, CNC steel 16:1 gears and a high torque neodymium magnet motor to deliver the torque needed for a lightning-fast trigger response.

The Diamond adds an AOE correcting rubber washer, a POM piston head made in the Czech Republic, an upgraded tappet plate spring, 8mm stainless steel ball-bearing bushings and the incredible Delta Armory Berserker Flat HOP-up kit, made by Psionics of Italy. The Berserker kit includes an enhanced HOP-up arm, flat nub and bucking optimised for maximum range, all made by HOP-up legends Psionics, true masters of the HOP-up game.

The result is a Delta Armory AEG at the top of its game, running smooth as butter and reaching out to very impressive ranges. If you aren't the type of Airsofter to buy a gun and upgrade it over time, get stuck in with the DA-DIA-ARENA-A14 ALPHA™ Diamond 10" M-LOK M4/AR-15 AEG and you won't look back!

If you're looking for a modern AR platform packed with pre-upgraded parts, the Specna Arms SA-P22 PRIME™ MK16 M-LOK M4/AR-15 AEG is exactly that. A high-quality full metal build on the outside with a sleek M-LOK handguard, 20mm Picatinny railed receiver and Specna Arms SAAS angled foregrip pre-installed, the SA-P22 is equally impressive on the inside, equipped with Specna's top-of-the-range internals, which are even better than the previous EDGE 2.0 lineup!

The PRIME™ range is Specna's newest line of AEGs. Taking traditional AEG silhouettes, Specna has revamped the internals with a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG is the option to choose either the Gate ASTER II™ Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and offering programmable firing modes. Which you choose depends on your needs; the ASTER II™ is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL version is great for users who prefer an easier-to-use yet still advanced MOSFET.

If you're not the type to delve into Airsoft internals but you still want top tier performance, Specna's PRIME™ range was made with you in mind. With a brushless motor, programmable MOSFET, upgraded HOP-up unit and stainless steel tightbore under the hood, you'll never need to upgrade SA-P22 PRIME™ MK16 M-LOK M4/AR-15 AEG!

Introducing the Bolster Tuned Noveske N4 10.5" Gen.3 Shorty .300 BLK AEG Rifle, a professionally upgraded AEG platform based on the EMG N4 Shorty. Boasting many of the biggest names in aftermarket upgrade parts and put together by the same talented techs that brought you Bolster Armouries, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

The Tuned N4 Shorty builds upon the already impressive base platform and extracts the very best, removing any parts that don't make the cut. Adding in a plethora of low friction, high strength enhancements including an FPS Softair Air Seal Nozzle and Carbon Fibre Reinforced Tappet Plate, Bolster's own EZO bearings, M115 spring and stainless steel sector gear screws, a Laylax Hard Selector plate and the gorgeous Gate Quantum flat blade trigger; this N4 is kitted out to shred anything else it encounters on the field.

The HOP-up has been enhanced with the team's new favourite HOP-up bucking, the 4UANTUM Friction Pro High-Performance HOP-up Bucking, ensuring the N4 meets the Bolster benchmark for accuracy and range. The Gate EON CNC POWER HYBRID Piston Head is also inside, ensuring that consistency is flawless and air efficiency is peak.

The Quantum is paired with the advanced Gate ASTER™ MOSFET, offering 250 different trigger sensitivity settings, pre-cocking, programmable fire controls and much more via the Gate USB link or Gate Control Station app. To deliver the speed it needs to bury the original EMG CYMA Platinum N4 Shorty, the Bolster team saw fit to install the Warhead Base 27K Brushless motor, providing unparalleled heat dispersion qualities and speed to rival the very best.

The highly regarded PTS EPG Pistol Grip has also been added to set the Warhead at the perfect angle, not to mention enhance ergonomics. To reliably handle the raw power provided by the Warhead motor, the team added in Laylax EG 18:1 Hardened Steel Gears, known for their strength and longevity. While the original is impressive, the Bolster Tuned version is the next level up!

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock N4 Shorty to a technician and paid for this amount of work to be done. When we tested the Tuned N4, we were amazed. 347 FPS on the dot with remarkable consistency, 60 m+ effective range and an absolutely scary rate of fire of 25 rounds per second; more than enough to outshoot anything else you can buy off the shelf!

If you're in search of a modernised Krinkov replica which is as much of a killer in-game as it is in looks, the Bolster Tuned CYMA CM.113B AKS-74U Zco Custom Upgraded AEG has your name on it! Based around the already impressive CM.113B Zco Custom, this beast has been refined by the talented techs of Bolster Armouries, furnished with some choice internal upgrades and tuned to get the absolute best out of the stock internal parts.

This new generation of Tuned AKS-74U is rocking a Warhead 27K Brushless Motor, Bolster Armouries EZO bearings, a Bolster Armouries AOE Correction Washer along with complimentary parts to keep it running reliably long term. Replacing the Kestrel Basic ETU, we have the space-aged Gate ASTER™ ETU, offering a wealth of programming options and equipped with the latest EXPERT Firmware. Amongst its many advantages over the Kestrel Basic, you can add the Gate Blu-link to program the ASTER™ with its wealth of customisation options on your phone using Bluetooth!

The HOP-up has been enhanced with a 4UANTUM Friction Pro High-Performance Hop Up Bucking to extend the range out to 60 meters and beyond and to bring the trigger into line with modern AR AEGs, the Bolster Armouries AK Trigger Spacer has been fitted, shortening trigger travel to a hair for an incredible response rate in semi-auto. The team has fitted theGate Power CNC Aluminium Hybrid Piston Head  to enhance air-seal qualities for minimal FPS deviation between shots. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of extra work was put in to refine the mass-produced CYMA gearbox and make it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER™ ETU. The cylinder windows have been radiused, increasing the strength of the shell to withstand the force of repeated piston impacts and the bearing holes have been smoothed out to reduce friction. The angle of engagement has also been corrected using the Bolster Armouries AOE Correction Washer, meaning 11.1V LiPo's are a go for the Tuned CM.113B, perfect for high rate of fire fiends!

While the original CM.113B is a very impressive shooter, the Bolster Boys have ushered forth its true potential in the Bolster Tuned version. If you're ready to dominate your next skirmish with a pre-upgraded piece which hits out to 60 meters with a spectacular rate of fire of 26 rounds per second, the Bolster Tuned CYMA CM.113B AKS-74U Zco Custom Upgraded AEG is ready for you!

Optimised for speed an manoeuvrability, this rifle excels in CQB and quick combat scenarios. The ARCTURUS M4/AR-15 Lite CQB sports a 10.5-inch slimline M-LOK handguard, that hides a beastly 6.01mm tightbore inner barrel for agile movement and handling, as well as superior precision shooting.

The rifle benefits from an aluminium handguard and polymer body and stock to keep the weight light and you light on your feet in the heat of battle. Featuring a monolithic top rail, M-LOK rail system and ambidextrous controls, sling plate and charging handle. It also boasts sleek stylings, with a modern 'Billet' style receiver and slimline low-profile stock; This AEG has everything you'd hope for in a modern AR.

If you are a lover of classic assault rifles, you will have noticed the absence of this Swiss beauty in AEG form, especially in full metal AEG form. An oft-forgotten platform, the S-55x series are a great alternative to the wealth of AR15s and AKs used by the vast majority of skirmishers. Take the JG S-551 to a Airsoft site and you will turn heads, then when you start shooting you will turn tails!

If you're in search of a long AR to complete your outdoor loadout, the Specna Arms SA-V30 ONE™ M4/AR-15 AEG; Kestrel Basic ETU is a fine choice. Boasting the top-notch build quality Specna's ONE™ series has become known for, this is the updated version, fitted with the superb EShooter Kestrel Basic ETU/MOSFET.

The Kestrel Basic offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking with 6 levels to choose from and several quality-of-life functions such as low battery warning and cycle completion. The result is a remarkably snappy trigger when pre-cocking is set, the perfect feature for someone who needs fire supremacy in CQB to get the job done! Also inside is a 6.03mm tightbore inner barrel and rotary HOP-up unit, giving you superb accuracy potential and the latest HOP-up design for M4/AR-15 platforms.

The Specna Arms SA-V30 ONE™ is a full-length M4 platform with a 15-inch outer barrel and a steel 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, making it a beast outdoors, and with the right upgrades, a DMR capable of dominating any firefight. Its super-light aluminium handguard gives you plenty of space for a nice C-clamp grip, making it easy to steer between targets at an impressive pace. No matter what you plan to do with it, this Specna Arms SA-V30 is a great addition to your armoury!

If you are in the market for something with stealthy looks that is also remarkably quiet to shoot, check out the CM.070 M4SD from CYMA. This M4/AR15 platform AEG sports full metal construction, a 6.03mm tight bore inner barrel, alloy rotary HOP-up unit, long quad 20mm Picatinny rail handguard, and extended controls, but the real icing on the cake is its silent piston and cylinder heads, which significantly muffle the gearbox noise. Coupled with the included suppressor, this AEG is practically as quiet as they come out of the box!

If you're sick and tired of seeing the usual M4 and AK variants, the Ares Otto Repa SOC SLR Assault Rifle AEG (AR SOC) should excite you! This interesting and unique bullpup design is based on a real steel prototype designed in Germany by Otto Repa, known as the SOC SLR. This variant is the AR-SOC, the assault rifle variant and is the ideal primary to pair with a sci-fi-style loadout which requires a plausibly realistic platform which doesn't look like any rifle issued in the current day.

Inside, we have a unique gearbox shell with wide parts compatibility with version 2 gearbox internals. The Ares EFCS MOSFET is also present inside, allowing for the AR-SOC's super satisfying 2-round burst mode and super snappy trigger response. The EFCS also provides programmable fire modes through the Ares EFCS Programming Box (available separately) and also provides cycle control, meaning you'll never get a trigger lockup with the AR-SOC no matter how fast you pump out those semi-auto shots.

We think the AR-SOC would be a fantastic stand-in for the Helldivers 2 Liberator assault rifle but also looks straight out of Halo! If your next move is to build a mould-breaking sci-fi loadout, the Ares Otto Repa SOC SLR Assault Rifle AEG (AR SOC) is the perfect primary!

If you're looking for an Airsoft bundle based around one of the best M4 AEGs on the market, you just found one! The KRYTAC REC7 Premium Primary Pack; Carbine includes the KRYTAC Barrett REC7 Carbine AEG, 2 extra mid-cap magazines, a holographic style red dot sight from Guerilla Tactical with a Ghost 3x Flip to side magnifier. The set also includes the HASTA Extra Large Wheeled Rifle Case, giving you a nice home to store your new premium primary!

This compact platform is exactly what you need for your close-quarters battles. It is short and lightweight, making it a great asset for those who like to stay nimble during their skirmishes. The Specna Arms SA-C21 CORE™ HAL¹ ETU™ M4/AR-15 AEG has an entry-level price point, with veteran-level potential!

This SA-C21 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring.