Airsoft Guns Above £300

An accurate 6mm BB Airsoft Electric Gun replica of an iconic piece of movie history, an all Alloy constructed replica of the Sterling E-11 Blaster. 

If you're searching for your dream DMR base gun and that happens to be a SCAR, the Cybergun FN Herstal SCAR-H MK.20 TPR AEG is just what you need! This is the king of SCARs, known as the SCAR-H TPR (Tactical Precision Rifle) or MK.20 SSR (Sniper Support Rifle), designed as a designated marksman's rifle variant of the MK.17/SCAR-H. 

The SCAR-H TPR differs from its smaller sibling in its longer receiver with lengthened accessory rails and multi-adjustable sniper-style stock with 8 cheek riser positions, 10 length of pull positions and a 20mm Picatinny monopod rail. The Cybergun replica carries over all of these iconic TPR features, along with a full metal build, licenced FN Hertal trademarks and the Ares EFCS programmable gearbox with low resistance wiring and a Deans/T-Plug battery connector. 

If your DMR needs dictate a realistic base gun which stands out from all the AR platforms, the Cybergun FN Herstal SCAR-H MK.20 TPR AEG is one to watch. We like to think of this as the PSG-1 of the 21st century, marrying the slick SCAR looks with beastly DMR proportions!

If you're searching for your dream DMR base gun and that happens to be a SCAR, the Cybergun FN Herstal SCAR-H MK.20 TPR AEG is just what you need! This is the king of SCARs, known as the SCAR-H TPR (Tactical Precision Rifle) or MK.20 SSR (Sniper Support Rifle), designed as a designated marksman's rifle variant of the MK.17/SCAR-H. 

The SCAR-H TPR differs from its smaller sibling in its longer receiver with lengthened accessory rails and multi-adjustable sniper-style stock with 8 cheek riser positions, 10 length of pull positions and a 20mm Picatinny monopod rail. The Cybergun replica carries over all of these iconic TPR features, along with a full metal build, licenced FN Hertal trademarks and the Ares EFCS programmable gearbox with low resistance wiring and a Deans/T-Plug battery connector. 

If your DMR needs dictate a realistic base gun which stands out from all the AR platforms, the Cybergun FN Herstal SCAR-H MK.20 TPR AEG is one to watch. We like to think of this as the PSG-1 of the 21st century, marrying the slick SCAR looks with beastly DMR proportions!

Built by G&G from the ground up this weapon is rather unique, based on a .308 styled AR receiver this weapon really stands out from the crowd with its' larger profile and magazines.

If AR-9s are your style, it doesn't get much better than this! This is a near-perfect replica of the real steel Noveske "Space Invader" Pistol, with all the trademarks and logos to match. AR-9s are the happy medium between a pistol and a rifle, being compact and easy to manoeuvre but boasting a much larger magazine capacity and range due to the longer barrel. 

The "Space Invader" boasts an SDU 2.0 MOSFET and eSilver Gearbox, which greatly improve this AEG's consistency, performance and trigger response. Beautiful looks and premium internals make for an incredible AEG and the Noveske nails that. If you need a compact CQB platform for running indoor skirmish fields, the EMG Noveske "Space Invader" Gen.4 PDW AR-9 AEG will be your best friend.

If AR-9s are your style, it doesn't get much better than this! This is a near-perfect replica of the real steel Noveske "Space Invader" Pistol, with all the trademarks and logos to match. AR-9s are the happy medium between a pistol and a rifle, being compact and easy to manoeuvre but boasting a much larger magazine capacity and range due to the longer barrel. 

The "Space Invader" boasts an SDU 2.0 MOSFET and eSilver Gearbox, which greatly improve this AEG's consistency, performance and trigger response. Beautiful looks and premium internals make for an incredible AEG and the Noveske nails that. If you need a compact CQB platform for running indoor skirmish fields, the EMG Noveske "Space Invader" Gen.4 PDW AR-9 AEG will be your best friend.

If AR-9s are your style, it doesn't get much better than this! This is a near-perfect replica of the real steel Noveske "Space Invader" Pistol, with all the trademarks and logos to match. AR-9s are the happy medium between a pistol and a rifle, being compact and easy to manoeuvre but boasting a much larger magazine capacity and range due to the longer barrel. 

The "Space Invader" boasts an SDU 2.0 MOSFET and eSilver Gearbox, which greatly improve this AEG's consistency, performance and trigger response. Beautiful looks and premium internals make for an incredible AEG and the Noveske nails that. If you need a compact CQB platform for running indoor skirmish fields, the EMG Noveske "Space Invader" Gen.4 PDW AR-9 AEG will be your best friend.

If AR-9s are your style, it doesn't get much better than this! This is a near-perfect replica of the real steel Noveske "Space Invader" Pistol, with all the trademarks and logos to match. AR-9s are the happy medium between a pistol and a rifle, being compact and easy to manoeuvre but boasting a much larger magazine capacity and range due to the longer barrel. 

The "Space Invader" boasts an SDU 2.0 MOSFET and eSilver Gearbox, which greatly improve this AEG's consistency, performance and trigger response. Beautiful looks and premium internals make for an incredible AEG and the Noveske nails that. If you need a compact CQB platform for running indoor skirmish fields, the EMG Noveske "Space Invader" Gen.4 PDW AR-9 AEG will be your best friend.

If CQB is your poison, you are going to love this one! The CM.106A AR-9 from CYMA adds to the increasingly wide range of AR-9 platforms available, making the decision on which platform to go for that much harder! The CM.106A sports full metal construction, a pre-installed electronic trigger unit with MOSFET, a high-speed motor, and internals which have been upgraded even beyond the already impressive "Platinum" internal setup.

If you ever wanted to light the enemy up with tracer BBs but don't like the looks of a suppressor, the CYMA Platinum SLR Airsoft Works AK-74 AEG is your dream come true! This pre-upgraded AK AEG is officially licenced by SLR Rifleworks and boasts a full metal build with plenty of steel, CYMA's impressive E-EDITION High Speed internals and a tracer unit integrated into the HOP-up unit, meaning you don't need to add length or weight with a tracer unit to get an instinct aiming advantage in CQB or low light skirmishes.

With pre-installed 13:1 high speed CNC steel gears, a CNC aluminium piston head and cylinder head, a high torque Neodymium magnet motor and a 6.03mm tightbore inner barrel, there is practically nothing left to upgrade on this beast! Also inside this, the latest version of the SLR AK-74 we are treated to the EShooter Kestrel Basic ETU, offering 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. Make no mistake, this beast is even more kitted out than the previous version!

Whether you seek a modernised AK to add to your arsenal or you are smitten by the sound of a built-in tracer unit, the CYMA Platinum SLR Airsoft Works AK-74 AEG will make your day with its thunderous rate of fire, superb long range accuracy, flawless build quality and now, programmable fire controls!

The Sterling MK5 (L34A1) is a later adaptation of the Sterling Submachine Gun, that was issued to small patrols for covert engagement and ambushes. This Electric-Powered Airsoft Replica of the Gun is constructed from Steel and Real Wood for an incredibly realistic experience, and features an externally-accessible Rotary HOP Unit for excellent lift on your BBs and easy adjustment.

If you are working on your Japanese WWII kit and support gunning is your game, this is the primary for you! The Golden Eagle Type 96 LMG replicates the Nambu Type 96, the standard light machine gun of the Imperial Japanese Army throughout most of WWII. The Golden Eagle replica boasts full metal construction, real wood furniture, a whopping 550mm 6.02mm tightbore inner barrel and a unique gearbox with version 2 compatible internals.

While visually similar to the BREN gun with its top-mounted magazine, the Type 96 is a different beast, using a different internal system than the BREN despite looking related. Like the BREN, the Type 96 is known to be one of the best LMGs of WWII thanks to its low weight, impressive accuracy and excellent design, making it a far more user-friendly platform than the American BAR.

To aid its role as a support platform, the Type 96 is equipped with a folding bipod which is a true asset when setting the LMG up in a fixed firing position, giving you the ability to tilt the LMG to keep it horizontal for better HOP-up effect and a more comfortable firing positon. If your tastes dictate a unique historical platform or you are working on your WWII ImperialJapanese Army loadout, the Type 96 will scratch that itch!

If you're sick and tired of seeing the usual M4 and AK variants, the Ares Otto Repa SOC SLR Assault Rifle AEG (AR SOC) should excite you! This interesting and unique bullpup design is based on a real steel prototype designed in Germany by Otto Repa, known as the SOC SLR. This variant is the AR-SOC, the assault rifle variant and is the ideal primary to pair with a sci-fi-style loadout which requires a plausibly realistic platform which doesn't look like any rifle issued in the current day.

Inside, we have a unique gearbox shell with wide parts compatibility with version 2 gearbox internals. The Ares EFCS MOSFET is also present inside, allowing for the AR-SOC's super satisfying 2-round burst mode and super snappy trigger response. The EFCS also provides programmable fire modes through the Ares EFCS Programming Box (available separately) and also provides cycle control, meaning you'll never get a trigger lockup with the AR-SOC no matter how fast you pump out those semi-auto shots.

We think the AR-SOC would be a fantastic stand-in for the Helldivers 2 Liberator assault rifle but also looks straight out of Halo! If your next move is to build a mould-breaking sci-fi loadout, the Ares Otto Repa SOC SLR Assault Rifle AEG (AR SOC) is the perfect primary!

If you're looking for the ideal GBBR to base your custom build on, you just found it! The CYMA CGS 10.5" M4A1 CQB GBBR is based on the original M4A1 in CQBR configuration, with the classic ribbed handguards, L.E stock and A2 pistol grip. This means either you can run it plane Jane in the classic configuration or build your own custom GBBR without wasting high-end parts.

Not that this platform lacks high-end parts! Inside you will find the same majority steel internal parts and 6.04mm tightbore inner barrel as its Noveske and Daniel Defense cousins. The most important aspect of this GBBR is its internal system which is based on the Tokyo Marui ZET system and enhanced by CYMA's GBBR wing, known as CGS. If you like thunderous recoil, a full metal build and externals just waiting for your own custom touch, the CGS 10.5" M4A1 CQB GBBR is the one to go for!

While it may not be the most practical primary available, nothing lays down firepower quite like the WE23-H Rotary Minigun AEG from WELL PRO. This is the Tripod Mounted version, pre-fitted with a 7mm metric threaded tripod mount on the bottom, ready to dominate any fixed position. The tripod mount also opens up possibilities of building an Airsoft technical (a light vehicle with a mounted weapon). Ambitious techy Airsofters who've been dreaming of riding around on the back of a golf buggy or quad bike showering the enemy team in a torrent of white fury, you need this!

If you haven't already heard, the WELL PRO Minigun series is simply without equal when it comes to rate of fire, hitting out at 36 rounds per second on an 11.1V LiPo battery. With significantly increased capacity, longer barrels and the ability to be mounted to common tripods you may already have in a dusty corner at home, the WELL PRO WE23-H Rotary Minigun AEG; Tripod Mounted adds a new dimension to Airsoft gameplay and makes a fantastic collection centrepiece! 

If you're a John Wick fan seeking an Airsoft gun which does the legendary Baba Yaga justice, the EMG Taran Tactical Innovations JW2 M4/AR-15 AEG; Kestrel Basic ETU is the one. This premium-tier AEG boasts full metal construction and CYMA's Platinum E-Edition internals, further refined in this latest version with the addition of the EShooter Kestrel V2 Basic MOSFET/ETU.

The Kestrel Basic ETU offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. The Kestrel keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. The other CYMA Platinum internals include 13:1 ratio high-speed gears running on 8mm ball-bearing bushings, a CNC aluminium "silent" ball-bearing piston head, double O-ring cylinder head, quick change ball-bearing spring guide and a high-speed motor to top it off!

On the outside, we have a 14.5-inch smooth profile outer barrel with a TTI muzzle brake, a CNC machined aluminium KeyMod rail system, the uniquely designed Taran Tactical AR-15 receiver and flawless engraved and laser engraved TTI markings across the design, perfectly replicating the rifle used by the boogie man in John Wick: Chapter 2. If you want to shoot quick and slick like Wick, the EMG Taran Tactical Innovations JW2 M4/AR-15 AEG; Kestrel Basic ETU will equip you to do so!

A Steel constructed member of the G3 Family which features a 20mm Railed Handguard, Steel Receiver, Sliding Crane Stock and 14mm CCW Threaded Barrel.

Following in the footsteps of the Krytac Kriss Vector Alpine Edition we are proud to introduce the Krytac EMG P90; Alpine Special Edition. This unique P90 variant has an eye-catching new look and brings plenty of modern functionality to the table as a bonus thanks to its redesigned modular upper receiver/optics bridge assembly. As with the original Krytac P90, this variant boasts full licencing from FN Herstal via Cybergun, but unlike the original, this P90 takes a walk on the wild side when it comes to external design!

Inside we are treated to the best the P90 platform has to offer, just like the previous P90 from Krytac. The trigger has been enhanced and now has a super short trigger travel with full adjustability, the upgraded internals are kept in check by the Krytac Nautilus MOSFET and a 30K RPM high torque motor delivers the power needed to provide a super snappy trigger response and a remarkable rate of fire. If you like your P90s minty fresh on the outside and a cold killer on the inside, this one should suit you!

If you're hunting for a super-compact GBBR for close-quarters work, the EMG CGS Daniel Defense DDM4® PDW GBBR should be in your sights! This full metal M4/AR-15 GBBR platform is based on the real steel Daniel Defense DDM4 PDW, a real steel AR "pistol" designed for use in tight quarters and when moving in and out of vehicles. Naturally, this beast is licenced by Daniel Defense, rocking immaculately engraved trademarks across the design, only deviating from the real thing in its inclusion of an actual stock instead of the "pistol stabilising brace" found on the real thing to please the ATF.

Inside, the DDM4 PDW GBBR is based on the Tokyo Marui ZET system, the best of the best when it comes to GBBR internal design. CGS has added a steel bolt carrier, steel trigger parts and a short stroked buffer into the mix, meaning enhanced strength in all the key areas and an absolutely killer rate of fire, especially compared with other GBBRs.

If you're into GBBR platforms and need something honed for CQB, you can't ask for much better than the EMG CGS Daniel Defense DDM4® PDW GBBR! With a snappy trigger response, above-average rate of fire, fantastic build quality and internals based around the best of the best in the GBBR world, this thing is one to watch in close quarters!

If you're hunting for a super-compact GBBR for close-quarters work, the EMG CGS Daniel Defense DDM4® PDW GBBR should be in your sights! This full metal M4/AR-15 GBBR platform is based on the real steel Daniel Defense DDM4 PDW, a real steel AR "pistol" designed for use in tight quarters and when moving in and out of vehicles. Naturally, this beast is licenced by Daniel Defense, rocking immaculately engraved trademarks across the design, only deviating from the real thing in its inclusion of an actual stock instead of the "pistol stabilising brace" found on the real thing to please the ATF.

Inside, the DDM4 PDW GBBR is based on the Tokyo Marui ZET system, the best of the best when it comes to GBBR internal design. CGS has added a steel bolt carrier, steel trigger parts and a short stroked buffer into the mix, meaning enhanced strength in all the key areas and an absolutely killer rate of fire, especially compared with other GBBRs.

If you're into GBBR platforms and need something honed for CQB, you can't ask for much better than the EMG CGS Daniel Defense DDM4® PDW GBBR! With a snappy trigger response, above-average rate of fire, fantastic build quality and internals based around the best of the best in the GBBR world, this thing is one to watch in close quarters!

If you're hunting for a super-compact GBBR for close-quarters work, the EMG CGS Daniel Defense DDM4® PDW GBBR should be in your sights! This full metal M4/AR-15 GBBR platform is based on the real steel Daniel Defense DDM4 PDW, a real steel AR "pistol" designed for use in tight quarters and when moving in and out of vehicles. Naturally, this beast is licenced by Daniel Defense, rocking immaculately engraved trademarks across the design, only deviating from the real thing in its inclusion of an actual stock instead of the "pistol stabilising brace" found on the real thing to please the ATF.

Inside, the DDM4 PDW GBBR is based on the Tokyo Marui ZET system, the best of the best when it comes to GBBR internal design. CGS has added a steel bolt carrier, steel trigger parts and a short stroked buffer into the mix, meaning enhanced strength in all the key areas and an absolutely killer rate of fire, especially compared with other GBBRs.

If you're into GBBR platforms and need something honed for CQB, you can't ask for much better than the EMG CGS Daniel Defense DDM4® PDW GBBR! With a snappy trigger response, above-average rate of fire, fantastic build quality and internals based around the best of the best in the GBBR world, this thing is one to watch in close quarters!

If CQB is your poison, or you have limited space in your kit bag, you are going to love this one! The CM.106 AR-9 PDW from CYMA adds to the increasingly wide range of AR-9 platforms available, making the decision on which platform to go for that much harder! The CM.106 PDW sports full metal construction, a pre-installed electronic trigger unit with MOSFET, a high-speed motor, and internals which have been upgraded even beyond the already impressive "Platinum" internal setup.

This MK7 Sterling is a replica of the rare Para-pistol SMG. It is a variation of the Sterling Submachine Guns that was produced for only 18 months from 1986 to 1988. This SMG was designed to provide paratroopers and non-infantry personnel with an automatic compact alternative to their pistols. The Airsoft replica doesn't quite have the same decorated history, but it looks just as stunning and would be a fine addition to any old military replica collection or wartime reenactor's arsenal.

Constructed almost entirely from steel with all the features one would expect from an authentic Sterling replica, the S&T MK7 Sterling is built like a tank, with the appropriate weight and heft for a realistic experience whether you're skirmishing with it or just fondling it at home (we don't judge!). Inside, we have a unique gearbox type with an alloy shell, caged motor and 18:1 ratio steel gears, with a well-concealed rotary adjustable HOP-up unit on the underside of the outer barrel. If you're looking for an old-school rare SMG or are working on your historic British firearms collection, you need the S&T MK7 Sterling!

If you're looking for a longer platform for outdoor skirmishing with no compromise when it comes to agility, check out the G&G Armament PRK9L Draco PCC AEG! Boasting full metal construction and a unique AK-based external design, the PRK9L is inspired by real steel Pistol Caliber Carbines popular in the 3-Gun competition sphere. Naturally, handling is impeccable, with all the ergonomic pitfalls of the AK truly cured, extended fire controls for speedy manipulation and an ultra-light extended M-LOK handguard well suited to modern shooting stances.

Inside, we're equipped with the proven G&G GT Advanced series internals, making the PRK9L 11.1V LiPo-ready straight out of the box. The gearbox shell is alloy and well-machined throughout, the 18:1 steel gearset runs on 8mm ball bearing bushings and the whole setup is driven by the renowned G&G Irfit 25K Orange high-speed motor, resulting in a super-snappy trigger response and way above average rate of fire. G&G's programmable MOSFET/ETU system also features inside, ensuring your electrical components run at maximum efficiency and offering the option to run 3-round burst mode instead of full auto.

As far as AK platforms go, the PRK9L is utterly unique, feeding from 9mm style magazines with sleek styling we're surprised an AK-derived design can pull off. If you need a real head-turner of a primary with killer performance and loads of accessory options, you can't go wrong with the G&G Armament PRK9L Draco PCC AEG!

A tough constructed SVD platform replica which has had a thorough course of Westernisation in the form of a Sliding Crane Stock, M-LOK Handguard and 20mm Railed Receiver, as well as a standard threaded Outer Barrel w/ Bird Cage Flash Hider.

If you're into the Daniel Defense look but want something a bit different, check out the EMG Daniel Defense DDM4® V7 AEG! Based on the real steel DDM4 V7P, this M4/AR-15 AEG is rocking a unique folding stock adapter inspired by the real steel LAW Tactical folding stock, meaning it can fit into smaller gun bags and can cut corners tighter than other ARs, ideal for CQB!

Up front, we have a fantastic replica of the real steel DD MRF 9.0, a dynamic free-floated M-LOK handguard made from CNC aluminium and bristling with licenced Daniel Defense trademarks. The receiver also sports finely engraved DD markings and is equipped with the EMG Alpha 19 ergonomic grip, a comfortable grip design made from superb quality high density polymer. 

Inside, we have the APS Silver Edge II gearbox, a V2 gearbox equipped with 18:1 CNC steel gears, a polymer piston with a full steel tooth rack, a double O-ring cylinder head and stainless steel cylinder. The spring guide is a quick change example, allowing for easy power tuning, and the motor is a 24K high torque, meaning a snappy response rate and respectable rate of fire. Also inside is the APS Micro-FET, an in-line MOSFET designed to prevent trigger lockups and improve electrical efficiency, translating into even more speed downrange. 

Whether you have limited space, like folding things or want a licenced Daniel Defense AR AEG which no-one else has, the EMG Daniel Defense DDM4® V7 AEG should be in your sights! Well equipped both inside and out with a super unique folding stock no other AR has, the DDM4 V7 is the MK18's dynamic-looking, speedy brother!

If you like the style of the GEN-12 but don't want to commit to shotgun gameplay on the skirmish field, then this is for you! The EMG Genesis ARMS GEN-12 AEG; Kestrel Basic ETU boasts the external design of the GEN-12 shotgun, a version of this platform famously seen in John Wick 4, but features the internals of an Airsoft M4, with the added functionality of programmable fire modes from the Kestrel Basic ETU.

The GEN-12 external design matches the real steel shotgun perfectly, boasting full metal construction, licenced trademarks from Genesis Arms, an M-LOK handguard, a super aggressive muzzle choke style flash hider and a massive 900rnd 12 gauge style magazine.

While this GEN-12 may not shoot like the shotgun, it has its own benefits. Internally, the GEN-12 is rocking a standard version 2 gearbox, M4/AR-15 rotary HOP-up unit and 6.02mm tightbore inner barrel, all of which are compatible with standard upgrade parts. This means you can deck this platform out with the latest and greatest upgrade parts, benefitting from access to the widest aftermarket in the Airsoft industry.

If you like to stand out on the skirmish field wielding something other than an M4 platform, the Cybergun FN Herstal SCAR-H AEG w/ EFCS MOSFET should suit you perfectly! This full-metal MK17 SCAR-H replica features licenced FN Herstal trademarks across the design, a dead-on match for the real SCAR-H. Externally, this SCAR-H is about as good as it gets, boasting a monolithic CNC aluminium upper receiver and fantastic quality polymer parts, a significant step up from most other SCAR replicas out there.

Inside, we are equipped with the ARES EFCS gearbox and MOSFET system, providing a lightning-fast trigger response in semi-auto along with programmable fire controls via the ARES EFCS Programming Box (available separately). The gearbox itself is rocking 18:1 ratio steel gears and a quick change spring system driven by a high torque slim motor housed in the ultra-realistic ARES slim motor grip.

The slim grip provides the most realistic handling experience an AEG can, matching the dimensions of real steel AR-15 grips and completely transforming the feel of the Cybergun SCAR-H into the realm of GBBR realism. If you're seeking a SCAR with flawless externals and well-equipped internals, the Cybergun FN Herstal SCAR-H AEG w/ EFCS MOSFET will do the trick!

If you like to stand out on the skirmish field wielding something other than an M4 platform, the Cybergun FN Herstal SCAR-H AEG w/ EFCS MOSFET should suit you perfectly! This full-metal MK17 SCAR-H replica features licenced FN Herstal trademarks across the design, a dead-on match for the real SCAR-H. Externally, this SCAR-H is about as good as it gets, boasting a monolithic CNC aluminium upper receiver and fantastic quality polymer parts, a significant step up from most other SCAR replicas out there.

Inside, we are equipped with the ARES EFCS gearbox and MOSFET system, providing a lightning-fast trigger response in semi-auto along with programmable fire controls via the ARES EFCS Programming Box (available separately). The gearbox itself is rocking 18:1 ratio steel gears and a quick change spring system driven by a high torque slim motor housed in the ultra-realistic ARES slim motor grip.

The slim grip provides the most realistic handling experience an AEG can, matching the dimensions of real steel AR-15 grips and completely transforming the feel of the Cybergun SCAR-H into the realm of GBBR realism. If you're seeking a SCAR with flawless externals and well-equipped internals, the Cybergun FN Herstal SCAR-H AEG w/ EFCS MOSFET will do the trick!

If you know real steel and like the NOVESKE aesthetic, you need to check this out! The EMG Noveske 13.7" Gen.3 INFIDEL AEG; Kestrel Basic ETU is a longer version of similar rifles like the DIPLOMAT and is is a perfect replica of the real steel Noveske Infidel Gen.3, a dynamic modern rifle beloved for its style and superior performance.

On the outside, we are treated to a full metal build with flawlessly engraved Noveske trademarks, a detailed replica of the Noveske KX3 Firepig flash suppressor, NSR 9" M-LOK handguard and "Super Badass" charging handle and the iconic Noveske silver outer barrel to add a hint of contrast to this high-end AR build.

Internally, the INFIDEL is equipped with the legendary CYMA Platinum internals, complete with the Kestral Basic ETU, just to top it off. For superior performance, this AEG is equipped with 13:1 ratio high-speed CNC gears, a high-speed motor and a quick change spring system for easy power tuning. The inner barrel is a 6.03mm tightbore paired with an alloy rotary HOP-up unit, leaving you with little left to do in terms of upgrades. It comes straight out of the box laser accurate and lightning fast!